loss of Visual imagery

Similar Questions

• Pilot Windows 10 for al2002w

  I use an AL2002W monitor with my 32-bit computer.  It is connected from a DisplayPort output to an adapter to the DVI - D monitor entry.  Whites out monitor intermittently, often enough it's causing programs to be unusable at times.  Sometimes the question flashes on / off power for about one second at a time, and sometimes it will remain idle for several seconds.  I don't want to 'off', the monitor is turned off the power, it is simply losing all the Visual effects.  Looking up my display settings and the adapter in Windows 10, I see that my monitor is not recognized, he simply called a 'generic PnP view', and the refresh rate is at 59 Hertz.  I spent 60 several times, but it keeps coming back to 59.  I would like to know where I can get a driver for the monitor, because the only listed by Acer is for Vista (64 and 32-bit versions), and I rather would not try that if there is something more recent or closer to the compatibility of Windows 10.  Any help with my situation would be very much appreciated, thank you for your time.

  PS Also, I wish I could refine my parameters display a bit, to see if something works just outside of recommended beaches, if possible, except that any manual I found online for the AL2002W shows an arrangment of button front slightly different from mine, and complicates the navigation in the OSD menu.  My button layout is: Page (possibly menu?) symbol, arrow down, negative, positive symbol symbol/Auto and symbol of power.

  My DVI - D DisplayPort cable arrived much earlier than expected and has resolved my intermittent loss of visuals.  I have not yet checked the solution 59Hz you suggested, but the screen seems to work very well, I suspect the DVI - D adapter DisplayPort that I used previously was the culprit, perhaps, he was not shielded well and was interference or something.  In any case, thank you very mcuh for your time and effort and feel free to mark this as resolved issue.

• PNG image compression

  I have a script that captures images PNG from a 3rd party server, I can save them to my server by using this code, forcing them to 45 x 45

  < cfimage

  action = "resize".

  Height = "45".

  Width = "45".

  source = "#objImage #

  destination = "#newFileName #

  Overwrite = "yes" >

  The issue I see is that the sizes of the files are nowhere nearly as low as they could be, I dropped a few of them in tinypng.com, and they can be reduced by as much as 75% and less than 50% without significant loss of Visual quality.

  The question is, does anyone have a method to compress the PNG? I see that the quality = "" is only suitable for JPG files "

  BTW, I use this on CF8

  It seems that I have a solution.

  The good folks at PNGout ( http://www.ardfry.com ) told me to go on https://pngquant.org/ that uses compression with loss, by dithering (aka being) the image.

  Looking at their site it appeared that they have different ways to test their software with links to third parties who use their software, one of them being http://www.tinyPNG.org , as you will see in my thread above I tried to produce the same great results from tinypng.

  I downloaded the version of pngquant for Windows command line and used CFEXECUTE to execute, it was super easy-->

  arguments = 'd:\232.png--ext .png - strength - speed 5.

  outputFile = «»

  Timeout = "60" >

  In order to not create a new file, but replace the original, I added -ext .png , otherwise, you end up with two images

  I noticed that I could do to run two times faster with -5 speedand still get the same amazing results, 20 k images a fall until about 5 k, with no fall obvious visual quality, if you go for -speed 11, the faster it can be much faster, but the file still much smaller size are not at their small.

  The only argument I've had trouble with -skip-if-plus great who is supposed to do not create the image, if the results of the new image are actually larger than the original, however when I tried I found that the new image would not create even if he would indeed be smaller (I emailed them about this problem)

  Ardfry suggested that I then run the image through their pngout without loss to earn more on the reduction of file size, the tests I did that did help, but only about 2% or more.

  This doesn't seem to be a good solution, it's fast enough, so I'll do what the good answer.

  Thanks for your comments.

• Problems of quality of 3D interpolation

  Hi all

  Everyone has noticed how the 3D interpolation results in loss of Visual quality of the movieclip?  For example, if I have text inside a movieclip and then put a Tween 3D on this movieclip, the text becomes almost blurry (even when the Tween is finished).  Then if I take off the movieclip 3D interpolation, the text returns to be perfectly clear.  It is not just text its content with a Tween 3D on it; text is the most sensitive.  Is anyone else dealing with this?

  Is there something I'm missing, as a parameter of quality on the 3D tweens?

  Thanks for any idea!

  P.S. There aren't filters blur on the movieclip.  I checked

  Hello

  I found the solution for this: -.

  http://forums.greensock.com/viewtopic.php?f=1&t=2542

• Visual c# command line compiler

  Greetings,

  About 14 days ago I received an error message at startup 'command line compiler Visual c# has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. "I click on 'Close' and after a few more screens (same message), the laptop is now running.

  I studied this during two weeks at three sites including two Microsoft sites. No one has an answer. However, when I searched Microsoft technical support I have referred me to the Sony because of the OEM license. So, I find myself in this forum.

  I found according to my research it is a file associated with this - csc.exe. I don't know if it is the cause or not. From research it is a component in C++ and associated with .NET. When I stop I get another error "the application could not initialize properly (0xc0000142). Click OK to close the application. »

  I have tried to use sfc but only get to 96% and received the message "Windows Resource Protection found violations of integrity." BTW, I'm under sfc since a high cmd prompt. I also ran check and looked at the newspapers. Because the paper is too large, but neither the newspaper for analysis or check all the items close to what I feel, I am enclosing details of the sfc.

  I have Norton 360 with virus update subscriptions and also ran CCleaner and SpyBot (I do it each month).

  I don't know what to do. I'm not a programmer and most of the Visual c# sites are for programmers, and told me that if my post is specific, in writing, or debug code, I need to ask for help from someone else.

  I also did the clean boot, add services, and startups. I can't find the program or the offending service. I am at a loss. I need help. Any ideas or suggestions are appreciated.

  Thank you

  Hello Legman,
  Thank you for your message
  It is quite possible that you may encounter a hardware problem if you have a C drive recovery and that you always encounter the error.
  Try to run the hidden partition hardware diagnostic software.

  to access the partition hidden startup cold.
  Spam [F10] several times from the VAIO logo
  Press ENTER to "Edit boot options".
  Once the recovery tools launch hardware diagnostics select.

  If the hard drive test fails to contact alternative service.
  www.sonyrepairservices.com

• Why update of security for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) updates every day on my PC?

  This update has been automatically be added daily at least last year.

  Hello

  Check that if the security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) has been successfully installed in view update history.

  Please follow the links:

  Method 1:

  Windows Update or Microsoft Update repeatedly offers the same update:

  http://support.Microsoft.com/kb/910339/#top

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Method 2:

  Try to install the update to KB2538242 manually and check with the question:

  Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package MFC security update:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=26347

   

  I hope this helps.

• Error message of Microsoft Visual C++ Runtime Library without program listed as the source of the error.

  I have a Microsoft Visual C++ Runtime Library error message, but no program is listed as the source of the error... the only entry is "program: C:\...» ».   I am running XP Service Pack 3 on a HP Mini.  HP support center suggests that a driver is not loaded, or is corrupt and suggests also that I have to reinstall the program.  It is impossible, however, if the program in question cannot be determined.  Any advice?

  What is your system brand and model (mini HP something)?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  If the system works, what do you think might have changed since the last time it did not work properly?

  When is it and what you do when you see this message?

  You see it every time the system starts or when you try to start a program?

  There may be some clues in the event where log Viewer, but has first:

  Microsoft offers several different versions of the Microsoft Visual C++ distributables.

  For their need for some of your applications or make install does not mean that you will make any C++ programming, but some applications need some of the runtime components and libraries installed with just distribution C++ files (it is not the whole development package).

  It is also possible to have multiple versions of the distributables C++ installed on your system - I installed 7, but you do not have to many.  Different programs that you install may require different sets of files to work.

  Take a look in Add/Remove programs and see what, if any, versions of Microsoft C++ Redistributables you have installed right now.

  The latest version is the version of Microsoft Visual C++ 2010, so if you don't have that, I would start by download and install from here:

  http://www.Microsoft.com/download/en/details.aspx?ID=8328 (this is the 32-bit version)

  If you see already that you have version 2010 installed in Add/Remove Programs, just uninstall it, reboot and reinstall it from the download, then view the side of things.

  Always restart after installing new software because that will eliminate the stupid question "did you restart your system" could happen later...

• Visual C++ Redist Error 1935

  Hello

  I recently bought bioshock2 and I installed it perfectly, but when I got to the part where I have to install Visual C++ redist I get an error 1935 I really don't understand ive done all I've found on the internet ive deleted all the other Visual C++ programs and tried to re - install, im at a loss here and really disappointed with microsoft on this one , hopefully somone can solve this problem. Thanks in advance!

  Best regards, Paradox

  Hi paradox.

  You can follow the instructions in the link below that may help you resolve the issue.

  Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version
  http://support.Microsoft.com/kb/970652
  Check whether the problem is resolved.

  If this does not work, try to download and install the stand alone pack from the link below.

  For a 64-bit Vista operating system:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en
  For a 32-bit Vista operating system:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=200b2fd9-AE1A-4a14-984d-389c36f85647&displaylang=en

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Microsoft Visual C++ runtime error library! Explorer.exe

  Hello. This issue has recently become a major problem. (A little) I know the cause of the problem; However, I'm not 100% sure of it. I get this error every time I have name a folder symbol (tested with-, ~,!, and @), then try to right-click or rename the folder. It's the exact error message I receive:

  Microsoft Visual C++ Runtime Library

  Runtime error!

  Program: C:\Windows\explorer.exe

  This application has requested the execution to terminate in an unusual way. For more information, contact the application support team.

  Although this error message on my screen, explore continues to work very well; However, as soon as I click 'OK' or try to X out the window, explorer.exe stops and restarts. I saw several other users showing similar problems with explorer.exe crashing on a right click on the files, so I tried to follow some of the steps they did to solve my problem. The majority of the questions that I looked through suggested the deletion/modification of certain registry entries. I followed all the steps and changed the various inputs with no luck.

  After looking through all the possible solutions for explorer.exe crashing on a right click, I migrated in search of solutions for "Microsoft Visual C++ Runtime Library error explorer.exe." I found few who have had a similar problem and received this error on click with the right button on the files, but my question was still a little different. This problem does not affect all my folders or a specific file. This problem affects any folder with the name of a symbol.

  I currently have a folder on my desktop named "-" (without the quotes) with most of the files on my computer inside. I just want to rename the folder without having to go through a lot of trouble. Rename the folder via CMD is not a solution. I get the "Access denied" message even if I run cmd.exe as administrator. I then started looking for ways to workaround for this lack of access and found a few useless solutions. The first solution I found suggested that I have change permissions for the folder. This was not helpful, because it was a right click on the file (out of, I can't do...). Another solution suggested to start the computer in safe mode and rename it from there. It also did not work, I still received the error "access denied."

  I'm kind of at a loss on what to do now. Here is a list of all the things I've tried, so please do not re - suggest what I've tried:

  • Restart the computer
  • Changing various registry files
  • Reinstallation of Microsoft Visual C++ (14 versions I had...)
  • Try renaming the file via the command prompt (w / run as administrator)
  • Try renaming the file via the Safe Mode command prompt
  • Scan my computer with antivirus (...) software

  There are probably a few more things I have tried and I forgot to include. This problem is happening for over a year now, so I had time to try a large number of possible solutions. I still have to find another person with exactly the same problem as me (the problem does not occur on files named a symbol). I do not plan to try to try reinstalling windows (/ create a restoration/image/etc.) I have quite simply do not have the time and should not have to reinstall my entire operating system to solve a stupid question. If it comes down to it, I'll just create another folder and move all my folder name "-" to the new. The only reason why I was stay to do this, is that the record is more than 100 GB. I believe there is a solution more simple I am just missing.

  Sorry, this message is rather unorganized. I am very frustrated by this issue and find a solution fairly quickly.

  Thanks in advance for the advice I received help.

  Clay S.

  Good morning, clay,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  A runtime error is a software or hardware problem that prevents Internet explorer from working correctly.

  Run time errors may be generated if a Web site uses the html code that is not compatible with the features of the web browser.

  I suggest you try following the steps provided in this Microsoft article knowledge based and check if it helps.
  Reference:
  Correct errors in Internet Explorer
  http://Support2.Microsoft.com/kb/822521

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Microsoft Visual Studio has encountered a problem and needs to close

  When I am trying to edit a template in Visual Studio and I go to GroupLevel1Style > FieldCaptionStyle, and then click borders and pour the tab, the following error message displays "Microsoft Visual Studio has encountered a problem and needs to close", then Visual Studio closes and opens again.

  If anyone can help, it is a known bug in Visual Studio?  I looked on the Microsoft site in a certain way to contact Microsoft but am at a loss.  If you do not know the answer to the problem, can you point me in the direction of a useful contact?

  Using Visual Studio 2010, running on Windows 8.

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Do I need a bunch of different versions of microsoft visual c ++?

  My computer has a bunch of different versions of Microsoft Visual C++

  I have 2 dated 2005, 2008 dated of 3, 1 dated 2010 and 2012 dated the 1.

  My understanding is that I would need only the latest version (2012), but I want to make sure before I uninstall the other.

  I know I could probably let them such that they cause any conflictions or anything, but I'm very short on space and would like to clear some. (I am running Windows 8 Pro on a Tablet Atom of power with 64 GB of storage, expansion is not an option without decreasing portability or an expensive solution).

  I have most of my files on skydrive storage, most of my space is taken up with the programs I need.

  If I uninstall 6 earlier versions of Microsoft Visual C++ without loss of functionality that would clear up some space.

  Thank you for your support.

  Hello

  Hello

  Do not uninstall one of these different versions of Visual C++.

  When a developer creates a software, they use the files from the current or a previous version of the Visual C++ runtime files. These versions are installed by the software program and must be present on the computer for this software to work correctly.

  When Windows Update checks your system for available updates, it detects these older versions are present and if an update is available for these older versions, it will be installed.

  Deleting one of these versions may cause some programs to stop working.

  If you look at the size of these files, they are very small.

  Concerning

• The reports generated interactive visuals: why some data link is unavailable?

  I want to enjoy the interactive generated visual report available in the electronic dashboard and share with the rest of my team, but some connection information is not displayed. Total number of clicks and the percentage of clicks appear in sections of header and footer. But anywhere in the body of the email where there is a link, the report indicates "0 clicks, 0.00% of total clicks." I pulled a report of broken link, so I can prove that the links in the email are, in fact, have clicked on, but I am at a loss as to why the data is not displayed in the Visual click per report.

  We use for a follow-up query strings, and all the links in our emails are redirect links... with the Eloqua coding. Could one of these have an impact on the reports?  (I'm on E9)

  Does anyone else have this problem? Your help and your insight is greatly appreciated.

  Thank you

  Julia Teske

  Specialist in marketing automation

  [email protected]

  Hi Julia,

  If you insert dynamic values in the URL (for example, the merger in e-mail as a query string) and then the Visual click by report will not work. Visual click compared scans each link in the email and then trys to match the history of clickstream data against these URLS. If it finds a match, it fills the click Visual. If he can't do it for some reason (for example the link in the email www.google.com?email=Email_Address and the final URL sent to contact after mergers is [email protected] ) then unfortunately, he can't fill these data in the report.

  The clicks link email fault report is the best choice in these situations, because it is not affected by the above question (as it is just a list of URLS from track data, it does validate not against the content of the email in Eloqua).

• Hide / Show grid region loss points available

  Hi apex community!

  In Application Express 4.2.5.00.08, I have the following problem.

  Grid layout Item2 property ""Start New Row "= NO "

  Hide and show region loss presentation grid points. For example-> > > >

  

  If you change the model to 'Région Standard', columns are displayed correctly

  

  Someone at - it a solution or alternative.

  Thank you

  Martin

  See problems with layout themed to show/hide the region 25

  Always specify which theme you use when you ask for the layout and Visual formatting issues.

• Received the error during installation because of Visual C++ is not installed

  Hello - I had a very hard time with Adobe Pro every step of the way. I have install at this time, but - although he does - he informed me that an MSI installation would not install Visual C++ 2013 and try to Setup.exe. I tried from there and got exactly the same message. I forged ahead anyway, and the installation is complete. I can open the program, open a file and save an email in pdf format (which so far I've had, because after the problems of today with Adobe, I need holiday...). In any case, there are a lot of things on my computer that has a name with 'end' in there, so I can't believe that I have not itself if I may not have the right... I am on Windows 10, and I'm a newbie total to it (even if, so far, it has not been as bad as I expected, except that nothing is where it was under WIndows 7). Windows 10 would be the problem? Is there something I can do? And what loss of functionality can I expect? Thank you.

  "Download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x 64) Microsoft Web site - www.microsoft.com."

  After you have uninstalled both of these special runtimes of the VC (VC ++ 2010 (x 86) and (x 64)), reinstall it from http://support.microsoft.com/kb/2019667. Also, make sure that you do not install the security update as well to: http://www.microsoft.com/en-us/download/details.aspx?id=26999.

  If the above fails, rename folder caps caps-former...

  Note: You need to maybe uninstall and reinstall applications CC except CC Adobe app.

  Geographical area:

  C: > Program (x 86) > common files > Adobe.

  Inside the Adobe folder, you can locate the Caps folder.

• Loss of functionality 'shortcut '.

  Hello and thank you for your time.

  Recently, I noticed a loss in a function keyboard, or maybe Im abusing the term "loss".

  The function in question is the alt + shift + right click (in windows) to change the hardness of my brushes.

  To be fair... the function actually works, however I seem to have lost the visual references of a color indicating

  the hardness of the brush. Ive went into Control Panel and tried to change the color of the red by default to several others, but

  nothing seems to work. I know that I can use shift + right or left support also, but I would really like to find the real

  Visual reference is nice time saver.

  IM in photoshop cs4 under xp sp3.

  Thanks again for your time

  You must have enabled in Edit-> preferences-> Performance to see as the OpenGL drawing