Lost access to the admin page after upgrade to the MyNetgear account

Similar Questions

• Lost access to the volume after upgrade 4.1

  Setup

  1 x HP c7000 blade box

  3 x HP BL460cG6 with dual Xeons 5540 and 48Gb of RAM, cards ISCSI HBA, QLogic

  3 x HP P4300 Lefthands

  4 x 3020 Cisco switches for blade in the back the c7000, 2 x dedicated to iSCSI traffic

  vSphere 4.1 Server

  The problem

  We went through the entire process of upgrading our server for vSphere 4.0 to 4.1 to manage a stand-alone ESXi 4.1 system, so our attentions turn to our 3 blades running ESXi 4.0u1 we used the built in Update Manager, downloaded the 4.0 to 4.1 upgrade file and we have improved our first blade and it did not notice problems as there put servers have was little used those.  We then upgraded the second and moved our main mail on her server.

  It was when we did that we started getting errors when people were losing connection to the exchange server, after some research we've seen of the event and we have been to see the error:

  "Lost access to the volume because of connectivity issues."  Recovery attempt is underway and the results will be available shortly"

  Then 10 seconds later we get the message:

  "Successfully restored access to the volume due to connectivity problems."

  This error only occurs on the blades of 4.1, we have restored a blade on 4.0 and errors are not displayed and no errors were reported with the servers on this blade.  As far as we can say it is not a network problem since all blades for iSCSI traffic flows on the same switches to the Lefthands, and we were losing the connection to volumes on the two Lefthands.

  We have a call connected with HP about this, but from the Yes, we cannot determine what is causing this problem and how to solve.

  So any help is greatly appricated

  Thank you

  Dave

  This is due to a combination of ESX(I) 4.1, QLogic and version Lefhand SAN/IQ 8.5 with the 10092-00 patch version. I did a blogpost on his problem:

  http://yuridejager.wordpress.com/2011/02/07/lost-access-to-volume-error-with-hp-lefthand-san-storage-after-upgrading-to-vmware-vsphere-41/. I hope this helps.

• I have more endurance, remove or insert the option pages after upgrade to Adobe DC. How to get back these functions?

  I have more endurance, remove or insert the option pages after upgrade to Adobe DC. How to get back these functions?

  Looks like you may have updated to misapplication. Probably, you have Adobe Acrobat (the full version) and installed Adobe Acrobat Reader instead. If you had "improved" Adobe Acrobat, it would have cost you money. Acrobat Reader is free.

• Lost access to the files on the hard drive.

  After you use the SYSTEM RESTORE, my office has lost access to all my files of data written and the pictures on the hard drive.

  I tried a backup disk or restart several months ago, but the drive will not read it!

  How can I restore access to "My Documents" and other folders?

  I use Windows XP with all updates of February/March 2013

  Alan / Alfasun

  [Moved from comments]

  Hi Alan,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that you have lost access to the files of data and images after doing a system restore.

  I would appreciate it if you could answer the following questions to help you best:

  1. Why did you perform a system restore?

  2 do you have questions about the computer?

  3. If so, please specify the question to better help you?

  4. What are the data and images file format?

   

  System Restore will return all your files non-system as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system.

  Based on the current situation, I suggest you to Undo a restoration of the system after performing a system restore.

  Check out the link and check if that helps.

  http://support.Microsoft.com/kb/306084

  If the problem persists, or you have any questions about the restoration of the system, do not hesitate to let us know. We will be happy to help you.

• I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates?

  I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates? Help please.

  There are two main reasons for the mistakes of certificate:

  1. Your computer's time is not set correctly.  Check your time year/month/day/hour/minute/timezone/light of day.  Right-click on the clock in your taskbar and select "set Date/time" and make sure you are ready approximately 5 minutes of real time (don't forget time zone and DST).
  2. The second reason is that Windows XP is not very good for updating root certificates.  Go to the following site:
        <>http://support.Microsoft.com/kb/931125 >
     and go down to the section:
     'Update Package root (designed for Windows XP only)'
     There is a link, you can use to download a update for your root certificates package.  Download this package and double-click it to update.

  HTH,

  JW

• Lost access to the preferences of the two priniters printer

  I lost access to the preference files to printer on the printers connected by USB 2 to a laptop running Win. XP.  The printers work without them.  I have since installed a new driver on one.  The problem remains. I join this printer to another computer and there is no problem.  Advice please on the best way to analyze this problem because there seems to be a lot of possibilities.

  I lost access to the preference files to printer on the printers connected by USB 2 to a laptop running Win. XP.  The printers work without them.  I have since installed a new driver on one.  The problem remains. I join this printer to another computer and there is no problem.  Advice please on the best way to analyze this problem because there seems to be a lot of possibilities.

  If I understand correctly, Windows XP indeed cannot replace printer drivers in certain circumstances.  The best way to go is to make sure that the old (maybe corrupted) driver is deleted and then reinstall the printer using an installation package of fresh driver (usually obtained by downloading from the website of the printer mfr).

  1. Unplug the printer.
  2. Uninstall the software associated with the printer using the control panel > Add / Remove programs.
  3. Open Printers and faxes and delete the printer (right click > delete)
  4. In printers and faxes, click file > server properties > tab drivers.  Select the driver concerned, then click on remove.
  5. Restart the computer.
  6. Run the installation package that you downloaded.  Do not connect the printer until prompted by the installation program.

• Hello. I bought creative suite and it downloaded on my computer, however, a few days my computer crashed and I got of him having wiped, and so I lost access to the creative suite. I was wondering if there is a way I can re - download the NICU programs

  Hello. I bought creative suite and it downloaded on my computer, however, a few days my computer crashed and I got of him having wiped, and so I lost access to the creative suite. I was wondering if there is a way I can re - download programs using my serial number?

  Other downloads

• I don't have access to the standard account is a password on the administrative account and don't remember and I don't want to remove the account because I have important documents, how can I access the account without the password

  I don't have access to the standard account is a password on the administrative account and don't remember and I don't want to remove the account because I have important documents, how can I access the account without the password

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. Mick Murphy - Microsoft partner

• After an automatic update, lastnight (13 December), has lost access to the internet through the guest account.

  Original title: Guest account Internet connection

  I am using an account on windows 7

  There has just been an automatic update, lastnight (13 December), and now I've lost access to internet through the guest account.

  I think that because of the update, the administrator must log or something, but I'm lost what to do. The internet worked for the guest before the update account and I do not have the administrator password. The administrator has not used the computer because I had an internet connection, as they went on vacation. I'm looking after their cats!

  Any help would be great.

  See you soon

  Tom

  Hi Tom,

  Thanks for posting in the Microsoft Community.

  Since you lost the internet connection after updating, you may need to update the NIC drivers to retrieve the connection. This is possible only if you have administrator privileges.

  For more information, see the article:

  What is a guest account?

  However, you can check if you can try the steps in the article to resolve the problem. If this isn't the case, you may need to wait for the administrator to return the party to the same difficulty.

  Wireless and wired network problems

  Hope this information helps.

  If you need further assistance, please answer and we will be happy to help you.

• Lost access to the documents after restart

  I had to reboot your computer due to hardware malfuntion. After the reboot, all the old data was recorded in a folder called my old programs. The computer has two user accounts. The two Adminstratotrs, one with password protection, the other without. Documents of the user account with password are not accessible, even if they are still on the hard drive and appear on the virus scan.

  What do you mean "not accessible"? Have you seen them but get an error "access denied"? If Yes, then you just need to take ownership of files.

  Appropriating a file or a folder under Windows XP [Q308421] - http://support.microsoft.com/?kbid=308421
  How can I get the Security tab in the folder properties? - http://www.dougknox.com/xp/tips/xp_security_tab.htm
  MS - MVP - Elephant Boy computers - don't panic!

• Unable to access iBooks Store for iPad after upgrade to iOS 9.3.3.

  We do not seem to access my iPad iBooks store 2 Air or my wife Mini 4 iPad after upgrading iOS 9.3.3 machines. When you click on any of the icons store across the lower part of the application, we get a blank white page. We can access all our books purchased on the iCloud, but cannot look for first timers. The iBooks app seems to work normally on my iPhone 6 after the iOS upgrade. Anyone else has a similar problem?

  Yes. Double-click the home button on the iPad and the iBooks app sliding upwards and out of the screen to close.

  Click on the home button to return to the home screen, then hold home and power/sleep buttons for 10-15 seconds or until the Apple logo appears.

  Reset draw iPads. Let them restart and try opening the iBooks App again.

  No data should be lost by the present.

• Firefox 10 - impossible to get rid of Mozilla what's new page after upgrade (new)

  Everytime I open Firefox 10 after upgrade, that I can not get rid of what's new page, that is, I can not open with a blank page. I'm aware of the procedure for this but it does not work. results also upgraded to Firefox 10 on my laptop (Vista Home Premium) without problem - I set to open with a blank page and hey presto it's happening.

  Hello

  Please see this.

• ProBook 4540S: 4540S HP cannot access fingerprint reader to login after upgrade windows 10

  Updated for Windows7 professional relatively smoothly. During the upgrade to Windows 10 required an uninstall of the HP tools protect and all files related; I guess it was the program by using the fingerprint reader when I first bought the lap top

  The BIOS is configured to allow the biometric device. Device Manager displays the "Validity Sensor" and is the latest version of the driver 4.5.133.0. Made the change of the parameter of gpedit.msc and went to the Admin tab to allow the use of biometric devices and sign in using biometric devices. I even went to the settings of power and unchecked the biometric cutting attribute as an energy saving

  Under the windows settings 10 for accounts under sign on options, there is no attribute for the biometric recognition and/or face. I added a PIN in the hope that it would seem, but nothing. Windows "Hello" is none existing

  Any help or suggestions appreciated

  Well well after having spend hours with tech support windows, they were able to verify that the pilot of validity that HP hs will not work with windows

  Forums search has found a link to the Lenovo for an updated driver for the device for detection of validity... It is packaged as a Synaptics driver http://support.lenovo.com/us/en/downloads/ds103635

  BTW - Synaptics now has Validity Sensor

  Uninstall all HP drivers in Device Manager

  The FP reader will show eventually as a unklnown device

  Install the pack driver Lenovo Windows 10... computer startup be and the the devive will re - show with the updated driver

  What d you know, now Windows Hello appears in the folder accounts, and you can use your fingerprint reader

  Shame, that we must go to another source instead of HP update their list of drivers

• all empty pages after upgrade from 4.0 to 4.1

  Hello
  Oracle Database 11 g Express Edition Release 11.2.0.2.0 - 64 bit
  Listener 1.1.3.243.11.40
  GlassFish Server Open Source Edition 3.1.2.2 (generation 5)
  Apex - was 4.0 now 4.1 (not 4.1.1)
  
  After running script of post-installation backend for 4.1, including loading image, which looks fine, I only get the white pages of the apex. Apex 'seems' to be running, sort of, for example if I ask https://mysite.org/apex, I am redirected to... / apex/f? p = 4550:1:68290240488371. So its giving me a session and send me in the right place, but the page is completely blank.
  I restarted glassfish, searched the receiver admin page, searched the journal of glassfish and usually scratched my head.
  
  Someone at - it suggestions?
  
  Thank you
  Steve

  Hello
  >
  Oracle Database 11 g Express Edition Release 11.2.0.2.0 - 64 bit
  Listener 1.1.3.243.11.40
  GlassFish Server Open Source Edition 3.1.2.2 (generation 5)
  Apex - was 4.0 now 4.1 (not 4.1.1)

  After you run the backend install scripts for 4.1, including loading image, which seems to work fine, I get only the white pages of the apex.
  >
  Loading image which you are referring? apxldimg? apxldimg is for the EPG, no Glassfish/Apexlistener
  >
  Apex 'seems' to be running, sort of, for example if I ask https://mysite.org/apex, I am redirected to... / apex/f? p = 4550:1:68290240488371. So its giving me a session and send me in the right place, but the page is completely blank.
  I restarted glassfish, searched the receiver admin page, searched the journal of glassfish and usually scratched my head.

  Someone at - it suggestions?

  >

  Copy the contents of the installable 4.1 image to the Glassfish /docroot folder / I case.

  See you soon,.

• Not be able to start admin server after upgrading to 9.2 9.2 MP1 MP3

  Hello
  
  We are not able to start the administration server after upgrade of MP1 9.2 9.2 MP3.
  
  We can see error below:
  
  in Admin Server Log:
  
  # < Sep 28, 2009 16:20:58 SGT > < opinion > < security > < ssunu17 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1254126058891 > < BEA-090082 > < security initialization using security realm myrealm. >
  # < Sep 28, 2009 16:21 SGT > < opinion > < Stdout > < ssunu17 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1254126060451 > < 000000 > < ManageableCitiLoginModuleImpl.initialize >
  # < Sep 28, 2009 16:21 SGT > < opinion > < Stdout > < ssunu17 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1254126060451 > < 000000 > < ManageableCitiLoginModuleImpl.login >
  # < Sep 28, 2009 16:21 SGT > < opinion > < Stdout > < ssunu17 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1254126060453 > < 000000 > < userName = xxxxxx >
  # < Sep 28, 2009 16:21 SGT > < opinion > < Stdout > < ssunu17 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1254126060457 > < 000000 > < ManageableCitiLoginModule.commit >
  # < Sep 28, 2009 16:21 SGT > < critical > < security > < ssunu17 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1254126060671 > < BEA-090404 > < xxxxxx to the user is not allowed to start the server; The server policy may have changed so that the user is no longer able to start the server. Restart the server with an administrative user account, or contact the system administrator to update the definitions of policy server. >
  # < Sep 28, 2009 16:21 SGT > < critical > < WebLogicServer > < ssunu17 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1254126060674 > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: xxxxxxx for the user is not allowed to start the server; The server policy may have changed so that the user is no longer able to start the server. Restart the server with an administrative user account, or contact the system administrator to update the definitions of server policies.
  weblogic.security.SecurityInitializationException: user xxxxx is not allowed to start the server; The server policy may have changed so that the user is no longer able to start the server. Restart the server with an administrative user account, or contact the system administrator to update the definitions of server policies.
  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:991)
  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1029)
  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
  at weblogic.security.SecurityService.start(SecurityService.java:141)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
  >
  # < Sep 28, 2009 16:21 SGT > < opinion > < WebLogicServer > < ssunu17 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1254126060727 > < BEA-000365 > < changed failed State Server >
  
  
  
  any idea?

  The username admin and the password is encrypted based on the version of domain, domain name and so on.

  To get your new server admin area so that it starts normally I would say that you rename the folder ldap under server admin domain folder.

  user_projects\domains\base_domain\servers\AdminServer\data\ldap

  From the administration server after it would create a new folder with all necessary files ldap, and you should be able to start your management server.

  Try to start the servers managed after that and if she does not follow the steps above for the managed server as ldap folder.

  Thank you
  Sadaka