lost all programs and docs on the vista help please
the system makes the update then rebooted when he returned to this subject had lost all descktop ikons and all the photos, but they r always at the poster in the c drive and his commimg now upward with hard drive failures
Hello
are you sure it was an update that caused it?
If it was an update follow these steps:
try a restore of the system before this happened
http://www.windowsvistauserguide.com/system_restore.htm
If necessary do in safe mode
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
__________________________________________________________________
but also read this information too as you mention data missing and hard drive errors
read the information at the bottom of the below link about what makes this malware hide your data files and the cure for it regarding
Read article 17
http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery
also follow the correct for that malware removal steps, just to be safe, let's
:
Tags: Windows
Similar Questions
-
I like to keep the buttons in my taskbar has organized with the browser and messaging on the left, followed by Windows Explorer and other items. If they get out of order or programs are loaded into a different order, how can I MOVE the buttons to a new location without having to close all programs and resume in the order I want? In addition, sometimes, one of program buttons seems in itself to migrate out of place and I need to get back to where it should be: same problem.
Hi shohareZohre
Thank you for using the Microsoft Answers Forums!
The task bar is the horizontal bar at the bottom of your screen time. In contrast to the office, which can get obscured by the windows on top of it, the taskbar are visible nearly all the time. It includes four main sections:
· The Start button, which opens the start menu.
· The Quick Launch bar, which allows you to start programs with a single click.
· The middle section, which shows you what programs and documents you have open and allows you to quickly switch between them.
· The notification area, which includes a clock and icons (small pictures) that communicate the status of certain programs and computer settings.
Add or remove programs on the Quick Launch toolbar
The Quick Launch toolbar is located on the task bar and is a convenient way to open programs. You can add or remove program icons in the Quick Launch toolbar so that you have easy access to the programs that you use frequently.
Click the icon for the program to add (you can find most icons of programs on the start menu or the desktop) and then drag it to the Quick Launch toolbar.
Note: If you don't see the toolbar tools quick launch, right-click on an empty area of the taskbar, click Toolbars, and then click quick launch.
Right-click on the icon of the program and then click Remove.
Notes: · Delete an icon from the taskbar does not remove its corresponding computer program.
· If you want to stop showing a toolbar on the taskbar, right-click an empty area of the taskbar, point to toolbars, and then click the item that you want to stop broadcasting.
NOTE: The ability to move the programs in the taskbar is not possible in windows Vista but the same functionality is available in Windows 7. Please see the link below.
http://www.Microsoft.com/Windows/Windows-7/features/Windows-taskbar.aspxand
Check out these links for more information:
http://support.Microsoft.com/default.aspx/KB/253679
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-programs-on-the-Quick-Launch-toolbar
http://Windows.Microsoft.com/en-us/Windows-Vista/show-or-hide-icons-in-the-taskbar
Hope this information was useful.
Let me know if it worked.
All the best!
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Need to backup all programs and files without the System Image
Hi all
Recently, I myself in a dilemma. I installed 4 additional disks with the intention of creating a RAID volume supported by the BIOS. To do this, I need to change the BIOS setting of the controller which includes all the volumes, including my boot drive (that I don't intend to RAID). The problem I have is that when I pass the UEFI to RAID controller, Windows Recovery will not use the System Image I did. He said that the volume was created under a different arrangement (Bios vs. EFI).
What are my options? Is there a different backup setting, which allows to keep all my installed software? I am not concerned with the data that I can copy it to an external volume, but it would take several days to get all of my software reinstalled. I would like to avoid this. I guess I'll have to reinstall Windows Pro 8.1 and then use a backup program to restore everything. If this is the case, then I need to know which backup program will work. If there is a better way, I would like to know. I see my options in the form, get another backup program, get a map of controller for the boot drive or the RAID volume or just reinstall.
Thank you
Hello
Thank you very much for the detailed information.
You can search the application using your favorite search engine, helping you to backup all programs and files without the System Image.
Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
For more information, you can ask your question on the TechNet forums
http://social.technet.Microsoft.com/forums/en-us/home?category=w8itpro
Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.
-
all programs and files in the menu start (excpet 4-5) have disappeared.
I use vista. When I click on the start menu, there are no programs not listed and when I choose all PROGRAMS there are only 8 folders listed.
I stopped twice and logged on as user admin and regular with the same results. All of these programs were here 2 days ago (do not use computer yesterday).
I can use Explorer to open files on the c drive and the programs open from there without any problem.
any suggestions...
Thank you for your response.
I did a system restore to 4-5 days before I noticed the problem and still had. To make a long story short, I went 30 days to discover the culprit.
I had downloaded a spy software called Comodo a month ago. I care for her so I unistaleld it. During uninstallation, he deleted my program files on the start menu. Rather unusual, I think, so I don't have the time to uninstall a 2nd with the same result.
I removed the Comodo manually and the system is back to normal.
See you soon
-
Hope someone can help me please... I bought a 2nd hand Blackberry Curve 8310 only a week ago and I just accidently deleted a file that has been deleted and ALL my applications and now I am unable to do anything. I got a Blackberry user tools disk with my phone, but it does not work in my computer it says I inserted a blank disc? My computer is running Windows Vista. I hope someone can help me, that / can do? Is there a disk or something to backup and restore applications that I lost? Help, please. kiwichick09
try to perform your 'o' key and see if it brings options, if so go to themes and change
Otherwise, I would like to do a backup via Desktop Manager and do a factory reset
to proceed with the factory reset, you will need to have DTM 4.7
Plug in BB with closed DTM
then go to start-run and type
cmd
Press enter
black screen comes up
type
CD c:\program files Research in motion\apploader
Press enter
type
/resettofactory Loader.exe
Press enter
Once the device has restarted, you should have everything back but your personal data
DTM allows to restore your backup
-
I would remove ALL of my laptop which is running vista Sp2 and I have not a disk to install it from what can do?
Hello
Here are the different ways to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
____________________________________________________________
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
__________________________________________________________
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
____________________________________________________________
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
Lost all LR camera profiles... Help, please!
I have been using LR5 for some time and never had any problems with profiles of camera for all 3 of my cameras. For some reason, this week, missing profiles. All photos in LR have a yellow tint and when I watch it on my PC they are thin and PS is fine too. I tried to move the profiles manually to my folder user for my specific devices, and it made no difference. No update is available according to the prompt assistance. I uninstalled and reinstalled the program, just in case something has been corrupted for some reason and no change. I downloaded the DNG Converter and the files are still all yellow in LR. Anyone have any suggestions on what I can do? Thanks in advance.
Profiles endangered are usually that your current image is not a raw image because profiles are only for raw files.
A color for the images (and the histogram) cast in LR is usually because your monitor profile is not compatible with LR. Usually, this incompatible profile is provided by the manufacturer of your monitor. You can if it's the problem by assigning sRGB profile:
-
The icon that is on my main computer for firefox screen disappeared.
The only way I can download firefox now is to go to all program and double-click the firefox program.
How can I get the icon on the main screen so that all I have to do is double-click on the icon and download firefox?
AlSi I mustn't lose all my favorites.go to the start menu > all programs & right click on the firefox icon. in the context menu, select "send to" and then "desktop (create shortcut)" (do not know if these are the exact terms since I use a non-English operating system)
-
I lost my accessory under Start, all programs, and accessibility.
Original title: Technical Support.
I have Windows XP Home Professional with Service Pack 3. I lost my accessory under Start, all programs, and accessibility. I want to use the calculator, but he's not here, I mean Windows components. They were deleted for a reason. He questioned the Service Pack 3 Cd, but I have only the CD with Service Pack 2. How can I reinstall them?
System File Checker will not work for you for two reasons:
- He will ask the installation CD XP sp3 - which is not
- Even if you have the correct CD, this isn't what SFC
Instead, see AccRestore - restores the missing Accessories group shortcut (this is a web site with confidence you can securely download the zip file, after you download the file, do a right click and "Extract all" and then double-click on the extracted exe file)
-
do you have a factory reset on compaq presario c700 windows vista 32-bit lost all drivers and bootmgr, but I don't have any disks help me please
Hello
Here is the information of HP (Compaq) for recovery options for Vista factory settings.
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703
See you soon.
-
I recently tried to open a new pdf file using an existing program Acrobat Reader and it changed the extensions of all programs and .pdf desktop icons, making them unusable. I uninstalled Reader and extensions have been fixed. But when I installed the drive again - the latest version (DC) it happened again. How can I fix it? I am on Windows 7
Hi donaldm78047015,
Try the solution mentioned in this KB doc. https://helpx.Adobe.com/Acrobat/KB/application-file-icons-change-Acrobat.html
Kind regards
Nicos
-
My system crashed, and after that a dozen tries to fix, I reinstalled edition vista family. I still have my old files and progrmas in windows.old file I can access but can't get the programs and data in the file. Is there a way to do this?
Hello
These should help you recover you can:
How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation
http://support.Microsoft.com/kb/932912How to restore your Windows.old folder in a new Installation
http://www.Vistax64.com/tutorials/237033-Windows-old-folder-restore-into-new-installation.htmlI hope this helps.
-
It seems that ROXIO CD and DVD copy program is part of the Vista program that came with the computer. After that the computer crashed it disappeared. It can be recovered?
Roxio CD and DVD is NOT a part of Vista, but it may have come with other software on your PC from the manufacturer. When you crashed, how are you on the recovery? Did you do a clean reinstall? Did you use a recovery disk provided by the manufacturer or a recovery Partition created by the manufacturer, or have you used a Vista disk?
If you used disks of recovery or a recovery of the manufacturer Partition, then you need to discuss with them because they produce these discs - not Microsoft (and they may be able to solve the problem or refer you to a site where you can download the program or email the file to you or something - or send you the replacement of the recovery with the software on this disc so always available - possibly for one) small fee). If you used a Microsoft disc, then this program is not on the disc and why he is not installed more.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Lightroom 6 suddenly very slow. All my changes drag on the screen at least + 10 seconds. The screen seems frozen between each edition. I use a macbook pro and all my programs are up to date. Help, please
Hi janeslens,
- Go to Lightroom > Preferences.
- Also please go to preferences > Performance tab and uncheck the box "use graphics processor.
- Restart Lightroom and see if it works.
- Please make sure you also update of Lightroom to the latest version, which is 6.3 Lightroom
Let me know if it helps.
Kind regards
Tanuj
-
I can't uninstall all programs and it says fail to uninstall, even with the cleaner and I don't know how to reinstall
Moving to the cloud creative download & install
Hello
Please, try the following steps:
- Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
- Reboot the computer.
- Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop
Kind regards
Sheena
Maybe you are looking for
-
I uninstalled McAfee when it expired due to the constant crashing, even with off SiteAdvisor. What antivirus is murkier free with Mozilla?
-
HP Pavilion PC 15-p207TX NB: the upgrade from normal to backlit keyboard
Hello My product is HP Pavilion 15-p207TX NB PC. I want to know that is it possible to change the keyboard from normal to backlit keyboard... ???. I have f Yes what is the cost. And one more thing, my laptop is in warranty if I change my keyboard it
-
Because I did an Apple ID for myselft for a long time and I don't remember my password. If I don't remember the answers to questions of security as unusual. Please help me! Thank you very much
-
SQL Fetch data recordset provides incomplete results
I use the code below to return data to a SQL database. However, varying all the elements in the array are empty except for the last column. In aid of "Database of Variant data" does not help (all but the last column is always empty). All the columns
-
I'm looking for a program to use that will be in HIPAA compliance when sending protected electronic health information. Any suggestions? Thank you! Kristin