Lost audio on Satellite Pro A120-PSAC1E after downloading Windows updates

Hello

I lost all sound on my laptop after downloading updates for Microsoft XP from the Windows Update site. I followed the instructions on solving the problems on my laptop and uninstalled Microsoft WINMM WDM Audio compatibility Driver.

I found afterwards kb 935448 XP update that is supposed to solve the audio problem, but this did not work. Now I want to reinstall the audio compatibility driver to see if it will work now, but I can't find anywhere to download.

Anyone know where I can find this driver?

Thank you

Hello

This issue has already been discussed here in the forum:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21936

As you say that the MS difficulty 935448 helped.

You want to reinstall the audio driver and don t know where to find this driver?

I visited the European Toshiba driver page and found the driver of his right.
Simply choose your laptop download driver form. Satellite Pro-> Pro A120 PSAC1E-> Win XP

Tags: Toshiba

Similar Questions

  • Satellite Pro A120 - PSAC1E Modem Driver WinXP

    Hello everyone,

    I have Satellite Pro A120 - PSAC1E and I'm looking to WinXP Driver Modem, can someone tell me where to get it?
    I tried to download driver for this model on the site of Toshiba, but with no luck to find the modem driver that I have found to reset the drivers.

    Thanks in advance.

    Hi dude

    The modem driver was published on the European driver Toshiba page.
    I'm sure because I checked the pilot site and found all the necessary drivers for XP and the modem in the Satellite Pro A120 PSAC1 driver download area.

    May I ask if you have installed the drivers of Toshiba in the right order?
    It is very important.
    Backgrounder statement instillation on the pilot website shows you how to install all the drivers.

    Just a note; You can install the driver for the modem from Device Manager.
    You must mark the unknown device (modem) and have point to the driver files that have been unpacked in the downloaded modem driver package.

    Welcome them

  • Need device driver IrDA for XP for Satellite Pro A120 PSAC1E

    I install win XP sp II in a Satellite Pro A120 PSAC1E.
    I find all the drivers except Irda driver.
    How can I get?

    Thank you

    Are you 100% that this laptop supports an IrDA port?

    By the way; all laptops with an IrDA port use a common Microsoft Windows driver to run the IrDA port.
    Then you n don't need to install any 3rd irda drivers. The windows OS using a clean!

    But once again; the question is: is this laptop supports IrDA port? I think that this feuture is not available

  • Satellite Pro A120 (PSAC1E) - TV problem

    Hello
    My laptop "Satellite Pro A120 (PSAC1E)" computer does not connect to any type of TV (digital or analog). I tried many different kind of connections to SCART-VGA to VGA-HDMI. I think something is wrong with the VGA output because apparently the Intel graphic card supports the TV/monitor output as the software driver suggests. However, I can't connect the laptop to an external monitor rather easily and without hassle.
    Someone there has the same problem and if so, do you have a solution to this problem (everything!).

    Thank you

    KAV

    Hello

    As far as I know NOT ALL Satellite Pro A120 PSAC1E are equipped with the video output jack!
    I see you are using an external monitor connector!
    This port can ONLY be used with external display (screen) or a projector, but NOT with the TV!

    The TV can be connected to the s-video port that is not available!

  • Satellite Pro A120 PSAC1E - where to find Vista drivers

    I have a Satellite Pro A120 PSAC1E and reflection on a clean install of Vista Home premium as a result of an upgrade memory to 2 GB.
    Is it possible to get all the specific files of the machine on the toshiba site to complete the installation?

    Of course, I won't have the original files and notice that some of them are updated.

    You already posted this message here. Am I wrong? ;)
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31606&TSTART=0
    Now, you use a different nickname ;)

    However, the Vista for Satellite Pro A120 PSAC1E drivers are placed on the European driver Toshiba page.

    Download all of the drivers, tools, unzip the files and install it.

    That s all buddy and I don t know why it so hard to s?  :|

  • Satellite Pro A120 PSAC1E: Cannot burn DVD-RAM

    Hello

    I have a Satellite Pro A120 PSAC1E, who owns a DVD player, I tried to write on a DVD RAM, and he says the copy is write protected, I checked help and it says to install the driver of DVD from tools and disk utilities, but I can't find the drive with the rest of the bits provided with the computer when I got it earlier.

    Is there anywhere I can download this driver?
    Thank you

    Hello
    One question; What operating system do you use? Looking for XP or Vista drivers?
    The Toshiba driver page provides all the necessary drivers. There is a new update 5.20 - B70A DLA . CA? OS independent and Ca s? s a good idea to install it.
    This is the problem for writing or formatting DVD-RAM disk.

    PS; The DVD-RAM driver is also available but only for W2k
    The XP and W2k DVD-RAM driver is available by satellite Pro A120 PSAC0E

  • Installation problems after upgrade the HDD on Satellite Pro A120 (PSAC1E)

    Hello

    I've recently updated my Satellite Pro A120 with more memory and a larger hard drive. The memory I installed is 2 x 1 GB Module (DDR2-667) and the product number of the hard drive is MK2035GSS.

    My computer recognizes both of these upgradges, but since their installation I was able to install all applications (for example Norton Security etc) on my laptop - they seem to spend 1/2 to 3/4 of the way in which the installation process and then just quit smoking and become insensitive or an error message appears. I even tried to put the product recovery disc to try and erase everything and start over but even that does not load in entirely. Any ideas of what could be the cause? Also, I get messages of constant error on the screen and it blue screens and restarts frequently.

    If anyone has any ideas on what could be the cause, I would be extremely grateful for any help!

    Thank you very much

    Cblack

    Post edited by: cblack

    Hello

    just a question, than to the manufacturer that are the memory modules? And similar modules? Or do you have that you have installed other modules later.
    We can exclude the HARD drive because it doesn´t HARD drive installed. they do not cause bluescreens or similar. In very rare cases, the disk HARD COULD cause errors, but then the pladder or BSOD´s must be REALLY damaged and in your case, the HARD drive is brand new.

    It might be, that memory modules are not compatible with your machine. To avoid these incompatibility issues, you must use the modules of well-known such as kingston and toshiba brands. (I'd rather kingston, they work like a charm in my A100 Sat :))

    Would appreciate comments on your part.

    See you soon

  • Satellite Pro A120 (PSAC1A-073004) replacement battery

    I have a 3-4 year old Toshiba Satellite Pro A120 (model PSAC1A-073004) who needs a new battery as the current within 10 minutes of the available battery.

    The current battery in the laptop's manufacturer PA3285U-3BAS a Toshiba 6 cells Li-ion primary battery.

    However, after contacting several local Australian retailers, they tell me that Toshiba has discontinued this particular part number.

    Are you able to advise me if this is indeed the case?

    If so, could you suggest the number of part of an appropriate substitute for the main battery?

    Thank you.

    Hello

    I don't know the situation in Australia, but I can't imagine Toshiba ceased production of this battery.
    Put this number in Google and you will find many shops online in the world where you can order this battery.

  • Satellite L850-1HP not configure downloaded Windows Update files

    My laptop was having problems on the first day that first the CD-ROM not open, then the webcam and the microphone switch off forever and can not be turned on again never and finally, this summer, my computer laptop would not connect to any WIFI network at all, it will still fail.

    I went to the place where I bought it for support, they sent for repairs, a week later, I'll be back, it is restored back to factory settings, all seemed well, CD ROM functional... Webcam and microphone too.

    So I thought I would check around and start things tyding for my taste, and then I realize that I need to download updates from Windows Update, so I do it, on 100 + updates, I start to download, but they do not download until the 20th minute that it is stuck at 0% What seemed fishy to me, because then he just jumped up to 10% and progressed forward.

    After downloading the updates, or so he said she had, I restart the laptop in to get their working and configured properly.

    There can be no. After I clicked on restart, it began to close, saying it is to configure and to 20-30%, it restarts, and then he charged to the top of the screen, even saying that he configures updates, then he said that he failed and said it restore the data back to normal, that he never scare made.

    After about two hours of waiting so he could do nothing at all, I restart the PC, the same thing.

    Restart again but this time I restore things settings once more, takes me about 1 hour with a full erase of the data (of course the rest of the OS and toshiba apps too) all implemented naming stuff, and accept the terms and conditions, blah blah, operating system starts, I check everything and restart.

    After the reboot, I decide not to configure anything until I downloaded all the windows updates, so I do just that, BUT I get the same error again, sneaky - slow download of updates, restart and get the same message that it cannot configure updates and wait forever-long for the laptop to "restore" data back to normal which she didn't do, once again.

    I'm completely helpless as to what I should do, I restored factory once more but this time I'll just wait for some feedback or try to make everything I find on these forums it is useful.

    Help, please.

    Hello

    Satellite L850-1HP was pre-installed with Win 8 64 bit.
    You have problems to install the updates to Win 8?

    Generally, you will get an error message if an update has failed.
    Could you post the error message?

  • Satellite Pro L40 - sound after installing Windows XP SP3 driver

    Hello

    I bought the Satellite Pro L40 about 6 months ago and the speed of the laptop is too slow with windows Vista. So I decided to install an old copy of windows XP that I had purchased earlier. I updated the windows SP3 installation before installing the drivers.

    Now, all the drivers have been installed correctly except the audio driver. I downloaded the XP version of the driver on the toshiba site, but it did not work. So I though that maybe the vista version would work, so I downloaded that. But that no longer works.

    Can someone suggest a solution where I can get the audio driver to work? Preferably without having to get the reinstalled windows again.

    Please help me...!

    Thank you

    Hello

    Try to reinstall the driver for sound card for XP; Just go here-> [fo Realtek card its Driver XP | http://support1.toshiba-tro.de/tedd-files2/0/sound-20071120150900.zip]

    Hope this helps :)

    Post edited by: iSkO

  • Satellite Pro M45 overheating after a few updates and installation of new HARD drive

    I have a sat pro p4 overheated now. I tried the old hoover and this does not work. The thing is that both fans do not seem to turn on. All this happened after I downloaded some updates to put on a new hard drive, I bought.

    Now the fans are not at all turns. My m/b is actually a model of the A45 and I put a 2.0/128/400 CPU inside. The old man who was in it is a 2.4./512/533

    It seems that you have changed almost everything on the laptop.
    Motherboard, CPU, HARD drive, etc.

    Believe me; It s not easy to say why fans don t start. How everyone should exactly known what you did on your laptop?
    Maybe the card mother doesn t provide the power for the fan or the connection is failing.
    Are you sure that the motherboard is ok?

    Unfortunately, all we can do is to hear from you.
    But usually some diagnostic tests are needed to locate the fault.

  • Satellite Pro A200GE - 26Q: Question about Windows update "TOSHIBA x 64 ACPI Compliant logical value.

    Hello

    I have a Satellite Pro A200GE-26. It has a core 2 duo T7200, running vista 32 provided with the computer (now sp1).

    Windows Update offers me the following optional update: 'TOSHIBA TOSHIBA - other hardware - x 64 compatible ACPI value logical and general-purpose device' but I am concerned that at present in Device Manager, the computer is listed as "ACPI x 86 based pc.

    Does anyone know why windows update offers this for me and if I install it?

    Thanks for any help!

    This update is available for all units of Core2Duo.
    As you already wrote it is optional, and you must not install it. If you use original recovery image Toshiba you have no need for the functionality of the laptop. Using the recovery image or you have installed your own OS?

  • XP hangs on reboot after download Windows Update & Installation

    Last Friday (September 16) after installing an automatic download of Windows Update (7 files) on my XP machine - SP3 OS, the restart procedure has begun to restart but "hung" just before the blue 'Welcome' screen, leaving a black screen with the cursor in the centre (cursor remains active). I suspect that a Windows or the files needed to move forward have been corrupted as a check of the HARD drive via another computer reports no problem with the drive.

    Finally I used the system provided by the OEM recovery CD to get the machine to boot into Windows, and although all the files that are on my "C" drive are still present, the Windows installation is actually a 'new' version of XP where any of my programs are available. In the root directory, there is now a second WINDOWS folder with the label "WINDOWS.0" that is clearly the source of the software used to initiate the Windows.My questions are:

    1. is there a procedure to "transpose" the old Windows installation in the new facility thus effectively regain its original configuration and my PC?... or

    2. I have to re - install all my software from scratch?

    3. If I have to can start from scratch with my programs I at least transfer my documents and settings (including emails) of the 'old' facility to the new?

    P. S.

    I know there is a 'Settings Transfer Wizard"but I think understand that it must be 'run' on a working version of the old installation of Windows first to generate the"file transfer"... it's clearly something that I'm unable to do.

    As an afterthought:

    Does anyone have any suggestions why or files could been corrupted because replace this (or these) would probably be the most elegant way to resurrect my machine to its original state?

    1 # because you used the recovery CD to do a factory reset, all your old data is lost.
    2. Yes.

    How to restore your Windows.old folder in a new Installation
    http://www.Vistax64.com/tutorials/237033-Windows-old-folder-restore-into-new-installation.html

    PS Windows is not booting from the folder windows.old against your perception.

  • Audio lost after upgrade to Vista on a Satellite Pro A120 PSAC1E

    Hello

    I just upgraded to vista and I lost my audio. I tried all the latest orders, still no luck. The pc says the driver is installed and the device works correctly, but I can't hear anything. Volume is 100% also.

    Any ideas?

    Well, first of all how someone should provide advice, if you n t write anything on the name cell phone you! ???
    Then please provide more details on your laptop!

    I noticed the same problem on the satellite U200. After upgrading from XP to Vista there is no sound, but the audio driver has been correctly installed and audio chipset has also been recognized correctly.

    After a long investigation, I found a solution here in the forum.
    First, it was important to increase the volume to the maximum with XP installed. Together sound controls must also be set to max.
    Be sure to use the RIGHT driver sound after the new installation of Vista.
    Not all drivers are working!

  • Satellite Pro A120 (PSAC1E) hangs after booting in a then a noisy fan

    My laptop A120 freezes during - or after startup, sometimes immediately, sometimes later (after 5 or 10 minutes).
    After the laptop has to freeze the fan going very strong and I can only shut down by pressing the power button for a while.
    I already flashed the BIOS with the latest version.
    Someone at - it an idea?
    Sorry for my language, but I'm from Holland.
    Thank you
    Marcel

    Post edited by: nine-eleven

    Hello

    RAM check is good idea and should be made without a doubt.
    The other reason might be a higher temperature. That would explain the cooling module hard.
    Maybe to prevent the dust inside the computer laptop cooling modules rotating at a higher speed and the temperature rises.
    A120 seems to be an older laptop and cooling modules can be dirty
    You should try to clean the fans using a jet of compressed air

Maybe you are looking for

  • "closure of the library.

    Hello I can't open my library on my Mac. When I press the icon for Photos, it says "closing of the library. I would appreciate your help by notifying my help step by step. Thank you

  • How to transfer or import istory of Safari browser to Chrome

    I'm having trouble with my Safari right now (more details on this saga here: Safari crashing my screen (and nothing else)) and I think that at least until I get that fixed I use Chrome for a while. However, it feels awkward to use Chrome without all

  • HP envy m6 1154er: need video driver HP envy m6 1154er

    HelloI am tring to find the pilot video, but without results.I installed the AMD driver, but it does not (error code 43).All drivers for Windows 7 I found already, just video driver is necessary.Thank you for your support!

  • Pavilion dv6-7002AX: get the drivers of USB tokens after reloading Windows

    Hello I recently installed a Samsung 840 EVO 250 GB SSD and Win 7 Ultimate (64 bit) on my computer laptop Pavilion dv6-7002AX (* NOTE *-purchased in Australia) and most of the time it went well. The current problem I have is the SM Bus controller and

  • bug strange number of bin on HP4015 with drivers HP PCL5 universal

    Hello We have 3 trays on a HP4015 so usually the numbers in the source document on the client side are: automatic, tray 1, 2, 3. Now, with HP universal PCL5 drivers on the client side we have number of tray: automatic, 241, 3972, 725, 726, 727 platea