Lost iPod, but has date of the last backup for iCloud
iPod 5th generation, iOS 9.2.
Last, known to have Tuesday dec 22, by car. Could not locate mode lost in 'find my iPhone', says offline.
backup to iCloud says date and time of the last backup performed Wednesday, December 23 at 12:17. What this means he had access to my wireless home network to do? It would be good to know if yes, then it is lost somewhere around the House and not elsewhere in the world!
Thank you
your iPod touch would be in the House because it was connected to the internet
If it was in the world then it will not be able to connect to internet
Tags: iPod
Similar Questions
-
You can restore the photos of the recently deleted items folder? I have an iCloud back for my iPad that I restored it that would have photos on them but then sync with my current iCloud files. Can I restore the last backup of iCloud?
The backup to iCloud for an iPad does not include items that are already in iCloud, your iCloud stream library and my photos are not included in the backup to iCloud.
-
Get the error during the last backup in iCloud "unable to complete backup.
I tried to rest network setting and restart the p as well
The amount of space you have available on iCloud? The amount of data you back up?
-
How to recover the data since the previous backup for iPhone?
Data restored from iTunes for iPhone; need to go further to get a previous restoration.
You can only do if you have a previous backup.
You are given a choice. If is not available, then you don't have a previous backup to restore from.
-
I've just updated to 29 of Firefox. Since the update the Norton Toolbar is no longer compatible. The Norton toolbar has worked in the last version of Firefox that I had installed. Is there a way to get back to the last version of Firefox where this toolbar is compatible and keep all the settings (favorites) in the old version I am reloading? All my passwords (99) are in the toolbar Norton Safe ID. Now I can not connect to many Web sites.
Hello jimb01, yes norton supports only the stable versions of firefox and Firefox 29 you are using the beta version of the browser. You can download the normal version of firefox 28 of https://www.mozilla.org/firefox/channel/#firefox and install it on top of your current installation...
-
I have a version of the software running iPod Classic 2.0.4 of 160 GB. The iPod has not been synchronized for more than a month. I did diagnostic tests today. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, he said that there was no iPod found. I checked and installed new updates, but it is not always sync. I restarted iTunes and computer, but it is not always sync. I ran a diagnostic on the device and it showed that it was operating normally.
The iPod must be configured to synchronize automatically. If this is not the case, click Sync does not synchronize no matter what.
Select the iPod in iTunes, so that you see the iPod settings screen in the iTunes window. Along the left side of the window, in the sidebar, under settings, click on music. To the right, you will see a settings screen of the iPod music , where you tell iTunes how to sync songs to the iPod.
NOTE: All the songs on the iPod that are NOT in your iTunes library (on the computer) will be lost. If all the songs are in your iTunes library, no problem.
At the top of the window, check the box to Sync music. This enables automatic synchronization. Below, select the option to synchronize library of ensemble music, if you want to 'all' in your music library to sync. At the bottom, click on the apply button.
From now on, when you make changes to your iTunes music library (like add new songs or update a playlist), iTunes automatically updated the iPod with the same changes when you connect (or click sync , if already connected).
-
HPCM error - definition model has changed since the last calculation
Hello world
I have a bit of a problem on an application Coordinator.
(1) message warning when I go to balancing-> "model has changed since the last calculation."
(2) message when I select cube considered in balancing-> 'the database has not been updated with the latest results of calculation."
What has been done before I got to this point:
(1) add a few lev 0 members in the current hierarchy for cost center
(2) run a comparison to check if they are picked up (OK!)
3) deploy EPMA (result: SUCCESSFUL message)
4) go to HPCM and deploy the two cubes (OK-> at least is what the status of the job)
(5) control of new members in OTL (OK! they are there)
(6) the HPCM Calc launch, check the box to erase all data of calc prev, check the box to regenerate calcs, check the box to transfer data to the reporting cube.
result: employment status: OK!
But in reality: never got transferred through to the reporting cube.
I repeated steps 1 through 6, a few times, I even changed something in the (alias) shared library to check if it went through.
In EPMA it says that the app is 'in sync with the deployment. And when I run a comparison with deployed application, it does not pick up anything.
Any ideas?
Thank you
Kind regards
AnnieHello world
Just realised I never came back with the answer to my question. I was developing the new application and starts the compilation of the Calc sequentially, so while I was developing Calc for step 2 or 3, rebuild only those scripts are calculate only the specific areas. This is the reason why I received this message. As soon as I transferred both apps and recalculated at the beginning, the error message disappeared.
Just in case someone wondered.See you soon,.
Annie -
My 2 TB Time Capsule is full and will not save. Yet, I have only 1 TB of data on my laptop. Note that I've reformatted the laptop since the last backup with a clean installation of El Capitan.
I bought a 2 TB external hard and have used Time Machine to back up. But I also use my time Capsule, which I save wireless.
Any suggestions on getting my TC back up?
One suggestion would be to copy all existing backups that are now on the Time Capsule 2 TB hard disk. Then, clear the TC and start over again with new backups.
A more expensive option... assuming you want to keep all old backups on the TC... would be to add a new TC and start backups goes in this direction.
Another option... If you do not need to keep all old backups now on the TC... would be to erase the TC and start over again with new backups. The benefit of doing this would be that no new material will be necessary, but the downside would be that you lose your old backup history.
-
I have to check if no job has run during the last five minutes.
I have to check if no job has run during the last five minutes.
I need to store five minutes in a table separate from five minutes can be changed to 10 minutes in the future.I will be pulling out of this table in the following query.
SELECT CASE WHEN COUNT (ROW_WID) = 0 THEN 'NO JOBS RAN AFTER THE SPECIFIED TIME"END
FROM W_ETL_RUN_SDTL WHERE START_TS > (SELECT sysdate - (SELECT * FROM XXAFL_MINUTES) the double);
Start_TS - date and time of beginning of the tasks/jobs
XXAFL_MINUTES - table, which keeps the number of minutes
Can you please help me to create the query. I'm not able to store five minutes in the table. What format should be the column?
The query above returns null, even if a job ran.
If you want to store an interval may be the interval data type would be a reasonable choice. Maybe something like:
create table check_intervals)
my_interval days apart on the second
);
insert into check_intervals (my_interval) values ('5' minutes of interval);
Select count (*)
of dba_scheduler_jobs
where start_date > (select sysdate - my_interval)
of check_intervals);
-
The last update for Adobe Acrobat Reader will not install on my iPad 2. He has downloaded, but fails to install. Have used the drive without problems so far. I have the latest update installed on my iPad ios. How can I solve this?
Hi joannaw84630025,
Restart your iPad, make sure that iOS id updated to version 8 or higher. Once rebooted try to update Acrobat Reader Adobe Acrobat Reader from the App Store again
Kind regards
Meenakshi
-
Hello
So I started with a Horizon view, so I apologize if this is a noob question. I wanted to try to put a security server in our DMZ, but before I put it in the DMZ I wanted to test whether customers would be on our network. So here's my setup:
Overview of VMware View Administrator 5.3.2 generation-188719
Same version for security server.
Windows Firewall is activated 'On' on all profiles on security and the server connection. (this might be important later)
Laptop with Horizon installed Client, Version 3.2.0 build-2331566
IPad Air2 with Horizon Client Version 3.2.0 build-2331566
On the Administrator display > display Configuration > Security servers > change on the Security Server
I PCoIP Secure Gateway set to the IP address of the Security Server (say its 192.168.1.10:4172)
Connection servers > edit on the login server
I also have the Security server defined as PCoIP Secure Gateway (192.168.1.10:4172)
Yet once I wanted to test it before I put it in the DMZ
So when I connect with the iPad, it works fine, I can connect, see all my connections and connect to just fine.
On the laptop, when I try to connect, I get the login screen where I put my user name and password (correctly, I might add ) and when I try and I get a connection error.
"Error: could not resolve the address of the server: the requested name is valid, but no data of the requested type was found."
I found the article KB VMware goes around the question: KB 2085365 (without help)
I changed the Secure Gateway on both safety and the connection to the server at each IP I can think of, but it still does not work.
Can someone give me an idea what can be wrong?
What is my firewall to connect to the server? (I don't remember if I had turned on firewalls when I installed the login server while they could not properly configured summer when I install?)
Any help would be amazing!
Thanks for reading!
I found the problem, it turns out that the network port to the Security server has been set for public and not private in the firewall. Thanks for the help!
-
I am running the following commanline...
'C:\Program VMware Consolidated Backup Framework\vcbmounter.exe' h vimlab.ourdomain.com u Administrator password - a 192.168.1.104:winxppro01 - r C:\mnt t fullvm Pei
2010-03-23 01:00:52.921 "BaseLibs" 3448 infoHOSTINFO: See Intel CPU, numCoresPerCPU 1, numThreadsPerCore 2.2010-03-23 01:00:52.921 "BaseLibs" 3448 infoHOSTINFO: numPhysCPUs is 0, bumping at 1.2010-03-23 01:00:52.921 "BaseLibs" 3448 infoHOSTINFO: numCores is 0, bumping at 1.2010-03-23 01:00:52.921 "BaseLibs" 3448 infoHOSTINFO: This machine has 1 UC physical and carrots 1 1 logical processors total.2010-03-23 01:00:53.687 "BaseLibs" 3448 infoUsing the libcrypto, version 90709F2010-03-23 01:00:53.687 "vcbMounter" error 3448Error: Another error: the requested name is valid, but no data of the requested type was found.I'm still new to VCB, so I don't know technically what I do. The vmdk files reside on an iSCSI Lun and I point the Server 2003 Windows VCB to the LUN using the MS iSCSI initiator and he see LUN. It see it as "Healthy (Unknown Partition)", but it see IT. My guess is that it should be able to see the files in the iSCSI LUN?
Anyway, just my SWAG (Scientific Wild Ass guess).
Using the '-san m "switch gives the same.
Any help on this is appreciated. I'm just trying to do a full backup of a virtual computer.
no doubt the '-a ' option does not. You must use it as '-a name:
Marcelo Soares
VMWare Certified Professional 310/410
Master virtualization technology
Globant Argentina
Review the allocation of points for "useful" or "right" answers.
-
Is it possible to reset the date of the last virus and update the spyware definitions in XP?
I have xpsp3. I was looking at my calendar to find out what day of the week, an event that happens in November, and unfortunately I forgot to go back to the date of the day before I have updated the definitions of viruses and spyware on MSE. Now, MSE think my latest definitions of viruses and spyware are obsolete, because they were supposed to be updated three months from now. So my question is: is it possible to reset the date of the last virus and update the spyware definitions in XP?
Correct the date on your computer. Remove the antivirus/malware product and reinstall.
-OR-
To restore before the update, use the system restore. Make sure the date is correct. Update.
Tom Ferguson
-
How can I identify the date when the last system restore was used to roll back the pc?
Original title: how System Restore last used
As the title suggests, how can I identify the date when the last system restore was used to roll back the pc?
I can remove all restore points. I've used twice now the beta off Defender & he assures me
the pc is clean Virgin.I have just got rid of a Trojan dropper & a Win 32/AmmyyAdmin. -(whatever it was!)
I now seem to have acquired Windows Powershell along the way, gawd knows where!
He was not here a few days ago and I don't have any idea where it is!
What is it and should I be worried?
Thank you
Hello
You can check this link:
How to restore Windows XP to a previous state
-
I have a cc has photoshop & lightroom, but can not access the mobile app for my ipad, I get a free 30-day trial?
Hi Michael,
Please try the below mentioned steps to activate Mobile with Lightroom.
- Kindly sign out and sign back into creative cloud on your machine: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
- Please also synchronize lightroom desktop and mobile with the steps mentioned in the link: using Adobe Photoshop Lightroom | Lightroom - computer desktop and sync Mobile app
Thank you
Atul Saini
Maybe you are looking for
-
I can't delete the 'save as deal finder' pop ups
When I go to sites like Amazon, Ebay etc., shopping and when I hover over an image a "Save as deal finder" pop up to appears and I can't remove it. I searched the net and cannot find all threads for that matter.
-
Re: Satellite Pro U400-11V - mass storage controller
Whenever I turn on the camera, I get the message "New hardware" about "mass storage controller". How can I fix it? Research on driver downloads is not one for this name.
-
How can I fix the problem when another computer is using the same IP address with me?
My computer has proven to me that there is another computer using my IP address. He said I need to contact the administrator. I don't know how to do in this regard. Help, please.
-
HALO 2 I've installed Halo 2 on my laptop and it worked, but then I broke my laptop and when I tried to install it on another computer, the disc is empty any ideas?
-
When you try to install Update of security for Microsoft Office System 2007 (KB973704) I keep receivingError Code: 0x8007066F How can I fix this so I can install the update? Thanks for any help