Lost records system for OS 10.6.8. Need to clear and restore.
I'm trying to help my friend to preserve its old Macbook (since 2007, I think). He got a few old files, it tries to convert this machine before it is retired.
We are in a situation of need to wipe and restore, but it doesn't have the original system discs. The machine is running currently 10.6.8. I found like cnet that said we can download the software, but wanted to ask for advice before launch us into places. If you did similar things and have any advice, I would be very grateful.
Some may suggest to pass to a newer operating system. Maybe it is possible afterwards, but for him to get these files old I don't think we can go up to past 10.8, even if it is legal to do so.
Thank you very much!
Even if you erase the disc, the only way to restore these files is to restore from a back upward.
A 2007 MacBook isn't still meets the requirements of Mountain Lion v10.8 > OS X Lion mountain system requirements
Do not download anything from Cnet. It's a good way to invite malicious software.
On the positive side, you can buy a disc of Snow Leopard at the Apple Store here.
post edited by: CS
Tags: Mac OS & System Software
Similar Questions
-
lost my password for the admin account I need help
Hello Mr President
My loss of password admin account can u help me to solve thisI have the guest account that BT is nt workingThank youm k mirzaHello
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
http://support.Microsoft.com/kb/189126/en-us
Tools third password
Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.
See you soon.
-
My hard drive died so I replaced it with an SSD. Re-installed windows 7 Home 64 and he see fine windows, however there no connection network or the internet. I downloaded the drivers from HP for the 1c58dx, but they won't install it. I need to find the drivers for the following items:
Ethernet controller: PCI\VEN_10EC & DEV_8136 & SUBSYS_169B103C & REV_05\4 & 3055DD30 & 0 & 0020
network controller: PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C & REV_00\4 & 341BB839 & 0 & 00A 9
PCI device: PCI\VEN_10EC & DEV_5209 & SUBSYS_169B103C & REV_01\4 & 2A8AB03B & 0 & 00AA
SM bus controller: PCI\VEN_1022 & DEV_780B & SUBSYS_169B103C & REV_13\3 & 2411E6FE & 1 & A0
Thanks in advance for any direction provided.
Hello:
First install the AMD Chipset drivers and reboot. You want the first file on the Web page.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
Ethernet controller:
network controller:
PCI device:
-
I have a
hP Pavilion 2211nr g6 AND THE HARD DRIVE CONNECTOR BROKEN AND I can NOT FIND a NEW
Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion g6-2211nr Notebook and the fact that your hard drive adaptor cable. Here is a link to your manual page 24 shows me part number 682745-001 KIT MATERIAL of HARD drive. I hope this helps.
Please let me know how it goes.
Thank you.
-
How can I upgrade and choose the operating system for my BB9900? I need thai input but on the site of H3G Italy software download is not all the language version. I don't know from which site to download.
Hi niranaja
If your device is running always on OS 7.0 then try 7.1 any Pack OS carrier that also supports Languages.But of Southeast Asia before opening your computer and uninstall any previous packs if installed OS on it. After that, try this:
1. download and install on your PC a pack OS with any language by carriers
- (Make sure you download for the same phone model)
2. download and install the latest version of BlackBerry desktop from here BlackBerry desktop software software
Then using software office perform your full backup of your device.
3. search your drive C: Vendor.xml and delete them, there may be one or two vendor.xml (on changing your Pc folders option to show the hidden files/folders ):
- C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
- C:\Users\Windows UserName\AppData\Roaming\Research in Motion\BlackBerry\Loader XML
4. go into C:\Program Files Research In Motion\AppLoader. (For Vista or Windows 7 64-bit, the path will be C: > Program Files x 86 > common files > Research In Motion > AppLoader) double-click on Loader.exe.
Upgrade will continue then after Installation of the new OS restore your BlackBerry Desktop backup
Software.
Once done open BlackBerry Desktop Software (7.1) > select Applications. > in the section of language and support for entry , select the language to be added to the BlackBerry smartphone (a + will appear next to the language to install) > click apply.
KB13067 : How to get smart BlackBerry phone language packs.
So please try it and let us know.
Prince
_____________________________________________________________________________
Click 'Like' If you want to thank someone.
If problem resolves mark message (s) as a 'Solution', so that others can use.
-
Windows 7 backup and restore recording is not recent files (and task corrupted images)
I recently discovered that my Windows 7 backup and restore does not work properly and need help to fix it. The backup runs daily, but it seems that he spared not the files that have been generated in the last month or so. For example, I was not able to restore files that have been created last week, even if they have been backed up yesterday.
Any questions/comments that might relate to the question above:
-J' had to upgrade to Windows 10 for 1 month and then downgraded to Windows 7, about a month earlier due to some software doesn't work only with Windows 10.
-Last week, I realized that my automatic backup didn't work automatically. I found the problem is due to a corrupt image of task in Task Scheduler I could fix. I have developed from my backup with the recommended settings settings, and I discovered that the problem of missing file today.-J' still have a problem with the images of task corrupted because when I open the Task Scheduler, I get about 70 errors which "XXXX task: the task image is damaged or has been tampered with." Any help
Help for backup and the Task Scheduler issues would be greatly appreciated. Thank you!!
André
Hello
Thanks for posting your query to the Microsoft forum. I will definitely help you with this.
This could be due to corruption on the system files, please follow the methods below.
Step 1: I suggest you to re-create the Task Scheduler.
Steps to re-create the Task Scheduler
- Click Start; in the start search type regedit.exe and press ENTER. (If you get a consent prompt, click Yes).
- Navigate to the following location. HKLM\Software\Microsoft\Windows NT\Current Version\Schedule keys and remove its subkeys.
- Save the changes and then close the registry editor.
Now check if the Task Scheduler works.
Note: The steps mentioned below includes the modification of the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
Step 2: Perform the scan SFC
I suggest that you can exercise SFC scan and check if that helps. The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. It is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.
See the link: use the File Checker system to repair missing or corrupted system files
Please answer us with this information and the current state of your computer, we will be happy to help you further.
_______________
Thank you best regards &,.
Isha Soni
-
Whenever I try to open a program (such as Internet Explorer, paint, etc.) one 'open with' appears. He never used to do and so I thought that programs such as those must be open with another program. I can't open anything because I don't know how to clear this check box so that these programs can do it themselves without a program.
Hi ginno,.-Did you change on your computer before this problem?Follow the steps in this link to fix the problem:Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: -
I lost my disc to restore system for Satellite Pro M70
Hello
I lost my system restore disc for my Satellite Pro M70.
If anyone can help with possible solutions. I want to restore it for my sister to take to College.Thank you
GregPossible solutions?
Well you can take the Microsoft Windows disk and can install windows by using the original Microsoft disc. All the necessary drivers and tools are placed on the European driver Toshiba page.I think you will not be able to order this disc of the local ASP or on this site https://backupmedia.toshiba.eu/landing.aspx because the M70 is a little older
So the real solution can be an installation of the OS by using MS Win drive
-
Original title: after a virus, I've lost the system restore for cannot defragment now
I had a virus which caused problems one of the minor being I've lost the system tools. It now says its empty when I open it.
You don't need system defragmentation tools.
You can defragment from the hard drive, then right-click of your hard drive, properties, tools, defragment now.
Of course, you must fix your missing tools too.
Here's the easiest way I know (thank you, Ramesh):
http://WindowsXP.MVPs.org/accessories.htm
Part of the answer to the technical support engineer Microsoft does not too which make me think that the MSE has never actually tested this Board to see if it actually works or not. It's a shame.
In addition, these shortcuts are not part in the folder
in any case. These things must go in the folder for all users - if you don't want your XP to be ignored. It is a source of embarrassment. I don't know what you used to remove the virus, but I could do that at some point (soon):
Download, install, update and do a full scan with these free malware detection programs:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish. -
How can I get a copy of my lost 'product key' for my Vista operating system?
How can I get a copy of my lost 'product key' for my Vista operating system?
How can I get a copy of my lost 'product key' for my Vista operating system?
It is quite difficult to 'lose '.
1. If you have a desktop computer, the product key is on the side or rear.
2. If you have a portable computer, the product key is down.
All else fails:
13 free product key finder programs
http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htmBelarc Advisor
http://www.Belarc.com/free_download.html -
Which record the events shown in the range of navigation when you view the Properties tab system for a Java flight recorder? I'm guessing that they mark the time for JFR's writing of the events on the disk.
I ask because, during the capture of a lot of information with the help of JFR, we see two effects that correlate with these events: (1) CPU usage ramps up a little bit between an event and the back then, level departure after each event, even if the application workload is constant; (2) the clock used to time stamp on all the events THAT JFR capture high-resolution seems to run more slowly in the period following immediately each of these events, perhaps for the period while JFR is written to disk. The slowdown of the clock appears as an increase in the rate of events shown in the range of navigation in other tabs - I also analyzed the events selected out of the original EN file to check their apparent rate.
I see this on Java EE applications running on JBoss EAP 6.x on Java 7 on machines virtual small vSphere.
The events shown in the navigotor range in any time must appear at the same time they are created. not when they are written to disk which can be a little later, depending on the settings.
In the System Properties tab, you generally see a single spike per segment in your record. You should see the same thing if you go to the tabgroup events and enable only the Java Virtual Machine system property / Initial if Types discovered.
As for the damages of its use and CPU timestamp, it sounds interesting.
What exact version of Java 7 you use, there would be some bug fixes in later versions.
-
I've suddenly lost recording function - even when I put them in a new file it works for w a while then turns off!
Close InDesign and relaunch it and IMMEDIATELY hold down Ctrl + Alt + Shift (Windows) or Cmd + Ctrl + Opt + shift (Mac) and answer Yes to the dialog box asking if you really want to replace the preferences.
If you are not asked the question, you do not press the keys quickly enough!
-
XPS8700 - I'm lost on audio for this system
This system is exactly a year now and I've never connected all speakers - partly because I do not understand what types will be or could work with him.
The original print system configuration indicates that my sound card is "Integrated 7.1 with WAVE MAXXAudio 4." In Device Manager, I see "Realtek High Definition Audio". Nowhere I do not see a name/number etc, real sound card model. -I don't even know what I've got here from an audio standpoint.
What I currently have for speakers - left by a previous system - is just a couple of desktop Labtec speakers and sub Harmon/Kardon. I would like to know if it is possible to use with this system and, whatever it is, I'd love suggestions on something better that would take advantage of the capabilities of this system.
Thanks for any help!
The manual is available online. Integrated means no separated from her but all card is on the motherboard. Check the back of the tower for audio ports, number 10 in the picture below. Manuals from here. See the Installation Guide for more photos.
Integrated 7.1 audio Realtek ALC3861
Gray = average on surround
Black = surround back on
Orange = Subwoofer and Center on
Pink = Microphone
Green = output stereo, speakers, headphones
Blue = stereo input -
I want to increase the logging level for my sound recorder and cannot find anything in the Windows 7 software that will allow me to do. I know that it's there somewhere because I put it at 50% during a recent troubleshooting session when he was at zero. Now, I find that the screen to increase it even more.
Hello
Welcome to Microsoft Windows 7 answers Forum!
You can try the steps below and check if the problem is resolved.
To adjust the record volume, follow these steps before you register:
1. click on Start
The collapse of this top this i, and then click Control Panel.
2. click on hardware and sound.
3. under his, click manage audio devices.
4. click on the recording tab.
5. click on the microphone device and then click Properties.
6. click on the tab levels move the slider to increase or decrease the volume.
If you find difficulties in following the above steps then you must follow the link below.
The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is lower than that of Windows XP.
http://support.Microsoft.com/kb/973446
Thank you, and in what concerns:
Suresh Kumar-Microsoft Support.
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.
-
Hey I lost my ios for my macbook how to fix
Hey I lost my ios for my macbook how to fix or install ios
You have a Macbook, but you've posted in the forum for desktop - I asked guests to move it on the forum of Macbook.
Your Macbook does not run iOS - it is for iPhones and iPads. I guess that say you you have damaged your operating system somehow, OSX - is that correct? This Apple help page explains how to reinstall your system:
Maybe you are looking for
-
How to do a search of Thunderbird * verbatim? *
For example, I want to search the word "walk" in my email address, and Thunderbird shows each e-mail mentioning the month of March. I want to disable this option (of preference, permanently).
-
C55-B856 - Windows 8.1 satellite will soon expire
Hello Mr President... My Toshiba Satellite NB SAT C55-B856 i3-4005 1.70 Ghz computer laptop with pre-installed Windows 8.1 was keep reminding me that my 'Windows expire soon"with a date until November 03,2014...I buy my laptop last 9 August 2014 to J
-
Can satellite U400-112 - I switch to Windows 8
Can I upgrade my Satellite U400-112 Win8?I have 4 GB of RAM and today I am running win7 Ultimate 64-bit Thank you
-
Hello everyone, Im new here on the Forum of Lenovo one I question... I have laptop G560 and my keyboard no longer works and I would like to ask a few flat keyboard in my G560... Something like this on the picture: Is this possible... This is an Ideap
-
How to repartition a drive during the upgrade to Windows Vista?
Original title: Solid state Drive When I try to install windows vista on xp operatring system overall upward does not give me the option to partition the drive