Lost the ability to achieve the Web for WRT610N utility
Until recently (not sure exactly when), on my Windows XP system, I used to be able to access the page of advanced configuration for my gateway WRT610N router by pointing a browser 192.168.1.1. No more: Firefox and IE say "Waiting."... "up until then they expire. Everything else seems to work very well; I can access the Internet and do all what I use the router for, no problem, I can not just to reach this configuration page. I've updated the Linksys LELA utility the other day, but I don't think that could block the IP address in the browser. The lights on the front panel are OK, and Ping seems good:
> ping 192.168.1.1
Ping 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes = 32 time<1ms ttl="">1ms>
.. and so on...
Ping statistics for 192.168.1.1:
Packets: Sent = 4, received = 4, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
Minimum = 0ms, Maximum = 0ms, average = 0ms
I don't have a second computer and factory reset is an ultimate plan. Want to diagnose the problem if possible; firmware, maybe? I did an upgrade of the firmware in November, but I don't know that I accessed the web installation since then.
This can be useful information; the manual of the router says rather than enter the IP number, you can type http://wrt160n.com to reach the configuration page, but rather than address (and wrt610n.com) lead me to external Web addresses, in 192.168.1.1 just crashes. I wonder what is the mechanism to trap the digital and the processed alpha and direct requests to the advanced router setup? It seems here that lies the fault, I suppose.
Soft reset is just a power-stop/start of the router (power cycle). In other words, just restart the router. It does not affect the settings in the router, as would a hard reset (by pressing the reset button or reset to the default values of the web utility).
Normally I would have just said 'reboot', so sorry if there is some confusion.
Tags: Linksys Routers
Similar Questions
-
I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but
Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.
You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:
Use iTunes to restore your device to factory settings - Support Apple iOS
If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.
copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support
-
Original title: redirection
When I type in a search on the web for anything whether it's IE, eBay or Facebook my PC just redirects research and opens another page, how can I rectify this
Hi Mark,Your computer is probably infected by a virus. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guideIt contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.Brian -
From Windows 8.1 to Windows 7, my HP Pavilion e101sl 17 laptop lost the drivers for USB
Hello guys, from 8.1 to Windows to Windows 7, my laptop HP Pavilion 17-e101sl lost the drivers for the USB controller, USB3 does not work, can someone help me please, thanks in advance
Hello:
Here is the link for the usb driver 3, you must...
Here's how to get the graphics to work when using W7 x 64...
1 install the Intel chipset driver and restart.
2. install the Intel graphics driver and restart.
3. download and install MS .NET Framework 4.0.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=17851
4. download and install the latest amd catalyst driver beta.
http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx
-
I lost the disk for my Canon Pixma ix6820 installation, is there something I can download instead? It is a mac.
Thanks for any help or ideas.
-
Using blackBerry Smartphones, I've lost the password for password keeper
Help I lost the password for password keeper. Is their any way I can reset the password without my previous password keeper?
I had my backup phone a few days before and was able to restore the previous state with 10 more try and was able to open the password lock after a bit more to try. Everything is good.
-
I lost the driver for my USB 2.0 - CRW. Any idea where I can download it?
I lost the driver for the USB 2.0 - CRW. I think that his is a Realtek and the software is version 6.1.8400.39030, but I can't find it anywhere to download. Any ideas?
Hi Ian,
Thanks for posting your question on the Microsoft community forums.
I understand you are trying to install the USB 2.0 - CRW drivers. Check out the link and download the drivers designed for Windows 7.
http://www.DriverMax.com/driver/update/USB/compatible-USB-storage-device/USB2.0-CRW/436978
You can install the drivers in Windows 7 in Windows 8 by using compatibility mode. Follow the steps.
(a) access to the start screen
(b) press Windows key + C on your keyboard to show the charms (if you have a touch screen: touch the right edge of your screen and slide your finger to the center of the screen to display the bar of charms)
(c) search for Troubleshooting, click settings in the right-hand column.
(d) click on troubleshooting. Click run programs made for previous versions of Windows
(e) click on Next, select not listed. Click Next
(f) click Browse and select the installation program that you downloaded via the link above.
(g) click on Next, click program troubleshooting
(h) check the program worked in earlier versions of Windows but won't install or run now
(i) click next , select the latest OS known functional for this driver (probably Windows 7)
(j) click Next
Let us know if you need assistance.
-
I lost the license for Photoshop and After Effects when updating to CC, 2015
When I updated all of my applications to 2015 CC, I lost the license for Photoshop and After Effects. All my other apps are not affected. I tried following the instructions here: Creative Cloud applications unexpectedly back in the test mode. CS6, CCM but it still says that there is no license associated with my account. I'm running OS X version 10.9.5 and I version the full creative cloud student. What else could I do to retrieve my apps? Thank you.
Christina I would advise you to Contact Customer Services and report this issue and they will be able to help you accordingly.
-
I lost the space for the opening of the object in the emails. How can I get it back?
For some reason, I lost the space where I would be in the "subject" of my e-mail address. When I click on send I am informed that there is no subject, I should like to send. I would like to know how I .can recover this important space.
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.
'Delete Cookies' sites causing problems:
- Firefox/tools > Options > privacy > Cookies: "show the Cookies".
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).
- Do NOT click on the reset button on the startup window Mode safe or make changes.
-
ZBook 15 Gen 1: lost the original for Zbook 15 disks
How can I get the origin comes with the zbook diskettes? I mean by records of the operating system, the relevant software in the installed hardware, etc... I bought an opportunity (3 months) zbook 15 G1 of a disheveled college professor. He has no idea what he was doing with the disks. I'm going to install a new SSD, so I need the OS. I also need the software of HP security for the fingerprint reader. I could really use these drives. People don't realize how important those drives really are.
Can I get them at HP?
Also, I have a 2.5 year warranty... They have a phone number? I know that this is not a warranty issue, but maybe that theyd sell me records.
If I can't bring it at HP, I would be happy to pay someone to make copies for me and send them my way.
Thank you very much!
Gary
Is what specific ZBook?
What is the operating system installed?
Yu can select the contact that you want to use on the web according to document.
http://h20566.www2.HP.com/portal/site/hpsc/public/help/contactHP/home/
You can the recovery media order of HP.
Perhaps the professor did not usb recovery media.
If the OS is Windows 8... Invoke the charm of the search, and then type in HP recovery media creator. Click the HP recovery media creator. You will need a usb flash drive to create the media. If the one you have is not sufficient capacity to make the media recovery media creator said you need you can cancel the process and go out to buy one that has the ability. Usually, this will be a 16 or 32 GB flash drive. Don't buy Sandisk flashdrives, because they know not to work with recovery media creator.
-
HAVE LOST THE ICON FOR ADDRESS BK, 'WRITE', 'SEND' ETC.
The top of my Email in Thunderbird page normally includes an icon for my address book. I think I clicked on the tool, menu and therefore lost the address book icon and have to go through quite a performance to find the names and addresses, etc. Anyone know how I can get it back please? With this, I also lost my 'writing' etc. Any help would be appreciated.
Thank you, ChurchanneDisplay-toolbars and tool bars turn on.
-
Search the Web for awesome bar
I cannot search the Web awesome bar, will return to my internet service provider page.
You can have an ISP that automatically redirects you to a search page if a DNS search fails.
It takes control of Firefox to search.
You can contact your ISP and ask for a DNS to opt-out of this feature.
You can check if there is a link on the search results page to go to your ISP and opt-out.
You can set different DNS servers. -
I lost the Office for an account I have when I tried to delete the password
I have Windows XP Home Edition. I had two user accounts, one owner and an administrator, but I've only used the owner, I had given a password. I saw a tip on how to remove the password for the signature requirement and thus lost the entire account. More important still, I lost everything I had on my desk, including records very important. Is there a way to get the account and back office?
Actually, I could connect is no longer on the account I "lost". I therefore decided to rebuild what I lost by doing a search for all files that I had lost and change. This turns out be a mistake, because I was 'fixing' them. In the middle of the night, I had the idea of just using the system restore, restore to the day before where I "lost" my account. It worked. I was back in business, but I lost some more recent information and feel the results of editing. So I was patching up some losses. But I guess I found my own answer. System Restore brought me back on the account that I had lost with all the files on my desktop safely returned.
-
My hard drive died so I replaced it with an SSD. Re-installed windows 7 Home 64 and he see fine windows, however there no connection network or the internet. I downloaded the drivers from HP for the 1c58dx, but they won't install it. I need to find the drivers for the following items:
Ethernet controller: PCI\VEN_10EC & DEV_8136 & SUBSYS_169B103C & REV_05\4 & 3055DD30 & 0 & 0020
network controller: PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C & REV_00\4 & 341BB839 & 0 & 00A 9
PCI device: PCI\VEN_10EC & DEV_5209 & SUBSYS_169B103C & REV_01\4 & 2A8AB03B & 0 & 00AA
SM bus controller: PCI\VEN_1022 & DEV_780B & SUBSYS_169B103C & REV_13\3 & 2411E6FE & 1 & A0
Thanks in advance for any direction provided.
Hello:
First install the AMD Chipset drivers and reboot. You want the first file on the Web page.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
Ethernet controller:
network controller:
PCI device:
-
I lost the shortcut for mozzila. How do I use it?
I accidentally lost the Mozilla application after creating a shortcut is pinned to the taskbar. I wanted to add to my startup. Please let me know how to solve this problem. I tried to reinstall, but who has not generated the actual application. I checked the trash, but it isn't here.
That's where I lost it.
I guess I didn't when I asked. Simply, I uninstalled and reinstalled. Now, everything is working as it should.
Maybe you are looking for
-
Hello I have a HP 6000 Pro SFF PDC small form factor with a unit power of 320 watts subbly. Available IIs a 550 Watt subbly unit or more? Or what can I do to change this PC for a good computer player? Thanks a lot for your answers Simone
-
SoftMotion "Buffer Update" VI refuses to take more points?
Hi all I'm on LabVIEW 2012, trying to figure out the example "Servo Drive (9505). Here's what I did: Copied the 'continuous Contour Move.vi axis' in a new Set up a SoftMotion (simulated axis), using default properties/settings Set up a Table SoftMoti
-
How to print 4 different pictures on one page in the order I want them to appear?
I have selected the 4 photos to print on a single page (3.5 x 5) but cannot arrange them in the order I want them to appear.
-
Missing features of blackBerry Q5 since upgrade
Since the upgrade to the latest version, I have lost my audio notification email and the possibility to receive JPG images with the text. Any ideas?
-
After the addition of tabs to a new page, the page renders in preview for Safari, Firefox and Google Chrome. But at the launch of the Web site tabs are removed and the content becomes a textual list of what is in the tabs. Dreamweaver CC 2015. Tha