lost touch pad dell drivers after installing Windows updates.

Similar Questions

• 0 x 80244004 error after installing Windows Update Agent 7.6.7600.256

  After installing Windows Update Agent 7.6.7600.256 22/06/2012, I no longer see the Windows Update page when I run Windows xp and get this error 0 x 80244004, any response?

  Hello

  I saw an answer posted by (DevekY) and it's here:

  (Go to Advanced Setup ESET
  Web and email-> Web access and anti-phishing protection-> HTTP, HTTPS
  Installation scanner HTTPS-> HTTPS filtering mode

  Select "do not use HTTPS protocol control")

  I did this and solved my problem (have no more error 0 x 80244004)

  But what do you think? My computer will not be endangered?

  Thanks a lot for your time to help me.

• I don't see the desktop icons after installing Windows updates.

  Original title: connection user init failure

  I m using windows 7 pro. After installing the updates, I have problem with the icon on the desktop .i has no icon on the desktop when you connect. get the message the CONNECTION USER INIT FAILED. After pressing ALT + CTRL + delete > taskmanager > run > Desktop Explorer icons is displayed... .i tried many time to solve this problem of the customer service, but they are unable to solve this problem. Please please help

  It is not possible for me to every time the format of the system

  kindly, please give solution.

  My system is connected to the network with 3 PCs and all are licensed copy.

  Hello

  Welcome to the Forums Community Microsoft and thanks for posting the question.

  According to the description, you get an error message "FAILED CONNECTION USER INIT" after installing Windows updates.

  From my research, this problem occurs if the Userinit key in the Windows registry has been changed. For example, this problem may occur if the Userinit key has a value, but no binary data.

  I suggest you follow the steps mentioned below.

  Method 1:

  Step 1: Start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Check the value and binary Userinit registry data

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. start Registry Editor. To do this, click Start, type regedit in the search box and press ENTER.

  b. click continue.

  c. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  d. in the right pane, right-click Userinit, and then click change.

  e. in the value data box, type hard disk:\Windows\System32\userinit.exe, and then click OK.

  Note: The placeholder of the hard drive refers to the drive on which Windows Vista is installed.

  f. close the registry editor.

  g. restart the computer.

  Method 2:

  Restore the system to an earlier point before installing this application.

  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
  
  More information on:
  
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information helps. Get back to us if you have more queries about Windows.

• No sound after installing Windows Update KB2962407 on Windows 8

  After installing Windows Update KB2962407 (RT of Windows, Windows 8 and Windows Server 2012 cumulative hotfix: June 2014), the PC loses all the sounds.  Its returns if I uninstall this update.

  Hello

  Microsoft has confirmed that this problem occurs on some Windows 8 PC.  You can solve this problem by opting for Windows 8.1.

  Microsoft made in Windows Update KB2962407 to fix this problem.  While installing Windows 8.1 is the preferred method, you can also resolve this problem in Windows 8 by checking the updates of Windows and reinstall Windows Update KB2962407 .

• Get his problem after installing windows update on May 18, 2016

  Original title: updated 18/06/2016

  Has anyone else been having sound problems with the new batch of updates? I tried to download the drivers, but that didn't work and now I had to restore my system from the 18th daily. Any ideas on how to identify the update is the cause or what driver I may have missed? My computer is a Dell Latitude E5420, running 64-bit Windows 7 Prof. Any other information needed let me know. Thank you!

  Hello

  According to the description, I understand that you are facing the problem in your computer after Windows installation updated May 18, 2016.

  Yes, you can view the installed update so that you can identify the updates that are installed in May 18, 2016.

  Please follow the steps to see updates history in Windows 7:

  1. Click the Start button.

  2. Then select Control Panel > programs.

  3. And then, under programs and features.

  4. Select view installed updates.

  View update installed please check that the update installed in May 18, 2016 and uninstall the update one & check if the sound is working well and find the culprit, update.

  Please follow the methods described below to check if it helps:

  Method 1: perform a Clean boot and install Windows Update.

  If its a major update, I recommend you put the computer in a clean boot state and install it again in order to minimize interference that could cause this noise problem.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: uninstall and reinstall the Sound Driver.

  1. Press Windows + X key.
  2. Type devmgmt.msc (to open Device Manager)
  3. Find and select the audio driver.
  4. Right click on the driver.
  5. Uninstall the audio driver.

  Windows automatically installs the generic driver, otherwise I recommend you download & install audio driver on the website of the manufacturer to check if it helps.

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• After installing Windows Update, all programs are very slow or have stopped responding.

  Original title: O.S. corrupted by Windows updates!

  After the Windows updates installed, all THE progs. v. slow or stop in response, & System Restore will not work. Scan found no virus.

  Hello

  Please repost the link below in the windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Computer crash - blue screen after installing windows updates

  After you have installed Windows updates waiting on the computer earlier this week, we were not able to get the computer working again.  We were asked to back up and restore the factory settings, which we did.  It instructions update you Windows. When we download the updates it crashes again.  Does anyone know if there is a problem with one of the recent updates that we should avoid so that we our computer working again?

  Hello

  Since you are quite sure this is an update to the source of the problem I want to troubleshoot using this method.

  Control Panel - Windows Updates - upper left settings - set to download but allow you to install them.
  To operate the system and see if there are problems.

  If no problem try to apply updates in small groups or even one at a time, depending on how
  There are many. Beware especially of driver updates that may be older that you have or
  those even incorrect.

  ---------------------------------------------------------------------------------------------------------------

  These can help to solve the problems of update.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ============================

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot open iTunes, after installing Windows updates.

  Original title: I Tunes

  Just did a windows update and now ITunes doesn't open

  Hi Sean,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. What are the numbers of installed Windows updates Knowledge Base article recently?

  3. that you get an error message when opening ITunes? If Yes, what is the exact error message?

  This problem may occur if the iTunes software is corrupted.

  I suggest you to uninstall and reinstall iTunes and check if it helps.

  
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Hope this information helps. Please provide the necessary information to help you further, I'll be happy to help you.

• The Internet connection is lost after installing Windows update

  Original title: put automatic has caused the loss of access to the internet

  After that the last automatic updates have been installed on the 8/17 or 18, I lost the internet connection.

  I had to restore my computer to an earlier date. When it was complete, I had access to the internet.

  I have reset my updates for having me choose when and which ones who.  When I install the updates, how can I know who we are at the origin of the problem.  In addition, how will I be able to solve the problem?

  Hello

  What is the error when you try to access the internet after upgrades?

  Method 1: Update the network drivers

  I suggest to update the network drivers, then try to update and check if the problem persists.

  Updated a hardware driver that is not working properly

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

  Method 2:

  We can find the update by installing the updates one at a time, the origin of the problem.

  To do:

  1. click on Start, type windows update and press enter

  2. click on check for updates in the left pane of the window

  3. when updates are found, open the list and select one at a time and install them.

• Satellite A500-1GH - need drivers after installing Windows

  Hi all

  I am facing a strange problem when I am trying to format my laptop.

  I boot from dvd press the option to install windows 7 and then I get the following error message:

  "Required the reader driver CD/DVD is missinjg. If you have a driver disk, CD, DVD, or USB flash drive, please insert it now.

  "Note: If the Windows installation media is in the CD/DVD drive, you can remove safely for this step.

  Start with a search on the net, I discovered that the more possible case is that the OS needs the driver HARD drive controller to continue.
  Assuming that this was the case, I downloaded from the support page, the following drivers:

  Storage Manager
  Chipset utility
  Intel Management Engine Interface and
  Intel Matrix Storage Management Utility

  After that, I extracted the executable files of the specified packages files on my USB flash drive and inserted in my Toshiba Sattelite but once again, he can not find the correct driver and displays the message:

  "No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK. »

  Am I missing a driver or what? All the world is facing this problem?

  Thanks in advance for any answer and sorry for the mistakes with my English

  What Win7 installation disc are you using?
  East - the original installation disc for Microsoft?

  I used the original installation disc Win7 and installed on a laptop more old like your A500 and everything was OK.

• Necessary drivers after installing Windows on Tecra M2

  Hello
  Could you tell me is there any order on the installation of drivers for Tecra M2? I heard that it is very important to install them in the precise order, but I can't. If there is, please help me and write the list of drivers in the order. I second question - I am before my first reinstall Windows on my tecra M2 and I don't know how to do it. I never did before on laptop. Is there a difference between installing windows on the laptop on a desktop PC? Please help me with this I'm a total newbie in laptops. What should I do? Just start windows from cd, format the drive and install win or on the desktop? It's my only computer so if I do something wrong, that I won't be able to get any help because the only way to get help with is the internet. Thanks for any help
  Concerning
  Szymon Ignarski

  Hello

  first of all the best way to reinstall the system is to use the recovery disc. Begin just with him, follow the display and the machine will be automatically set back to the default settings.

  If you want to do the installation yourself, that it's almost like on desktop computers.
  Boot from the Windows CD and install the OS.
  To install the drivers and software in the correct order.

  1 Windows XP Professional SP2
  2 Microsoft Windows XP Professional self-study Interactive V3.5.23
  4 DirectX V9.0c (native)
  Native of Windows Media Player 9 5
  6 natives of Windows Movie Maker 2.0
  7 Microsoft .NET Framework native
  Microsoft 8 REG OneNoteMC 2003 SP1 (V11.6360.6360)
  9 Sun Java 2 Runtime Environment V1.4.2_05
  10 Intel Chipset Software Installation Utility V4.30.1006
  11 common modules for TOSHIBA V6.02.00
  12 nVIDIA GeForceFX 5200 Display Driver V46.34 GB
  13 SoundMAX Integrated Digital Audio V5.12.01.5160
  14 ALPS Pointing-device Driver V6.0.303.4
  TOSHIBA 15 double utility V1.1.0.1 of pointing device
  16 TOSHIBA Software Modem SM2138ALD04
  Driver LAN internal 17 V1.00
  18 Intel (r) PRO/100 VE Network Connection V6.4.14
  19 Intel(r) PRO/1000 MT connection Mobile V6.4.16
  Wireless LAN driver internal 20 V1.18
  21 Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter V1.6.0.47w2
  22 Intel (r) PRO/Wireless LAN 802. 11b / g a/b/g driver V9.0.0.60
  Atheros AR5001X Mini PCI wireless adapter V3.1.2.12i112 23
  Cisco 24 Mini PCI V3.5.13.0 wireless network adapter
  25 internal Wireless LAN Utility V1.19
  26 Atheros Client Utility V3.1.2.19.i123
  27 cisco Aironet Client Utility V6.1
  28 Aironet cisco LEAP Module V6.0
  29 Hotkey wireless V2.0.0.5
  30 SMSC IrCC - Fast Infrared V5.1.2500.0b Port
  31 native Windows SD Host Controller Driver
  32 SD Secure Module V1.0.2
  33 V2.0.2.1A TOSHIBA SD memory card format
  34 TOSHIBA SD Memory Boot Utility V1.0.2.0A
  Bluetooth Stack for Windows by Toshiba V3.00.32 Build20040728v3_3_00_32_ReleaseUS 35
  36 Bluetooth Monitor V2.00 (Build20040803)
  TOSHIBA 37 V2.5.0.0 display devices Hotkey Utility
  TOSHIBA display device utility change V1.4.0.0 38 - 01
  39 TOSHIBA zooming Utility V2.0.0.18a
  40 TOSHIBA Power Saver V7.03.04
  41 TOSHIBA Mobile Extension3 for Windows XP V3.65.00.XP
  Utilities TOSHIBA 42 V4.20.26
  43 TOSHIBA Console V3.04.00
  44 controls TOSHIBA V3.01.0101
  45 TOSHIBA Skins for Windows Media Player V1.00.1121
  46 TOSHIBA ConfigFree V4.90.57
  Demo ConfigFree 47 V1.00.05 screensaver
  TOSHIBA 48 V3.5.2 Management Console
  PC Diagnostic TOSHIBA 49 V3.0.6 tool
  TOSHIBA 50 IP PHONE V1.0.0.2
  Effect Audio TOSHIBA 51 V1.00.02
  V4.0Build11.115 52 interVideo WinDVD
  53 interVideo WinDVD Creator 2 Platinum V2.0.14.182W2
  54 CD/DVD Drive Acoustic Silencer V1.00.005
  55 drag ' n Drop CD DVD V3.00.361
  56 drag'n Drop CD DVD SP2 patch V2.3.9.0
  57 V3.1.0.0 DVD-RAM driver software
  58 b ' z CLiP V5.43
  adobe Acrobat Reader version 5.0 59
  TOSHIBA 60 help and Support v1.3
  61 T.BIOS'CEO Driver V2.5USB1
  Toshiba 62 SMBIOS ActiveX Control V1.3
  63 of Toshiba and Microsoft Product Registration (Datalode) V3.54.164.0 (batch version)
  Norton AntiVirus 2004 V10.0.25.3b 64
  Norton Antivirus 2004 SP2 patch V1.0 Build111 65
  66 AOL 9.0 V9.0
  67 TOSHIBA Solutions V1.0
  Laptop 68 Retriever V1.0
  69 V1.1 PC backup solution
  TOSHIBA 70 user manual v1.1
  71 GST Init V1.0.4.0
  NIHelper - 72
  Mrk 73 V1.2 file creation tool

  Good bye

• HP dv7-1450us netbook: 3 base system device a missing an unknown device drivers after installing windows 8.00

  I installed windows 8 on a new clean hard drive, I'm updating with windows update but I still 4 devices missing drivers, 3 base system and an unknown device, how can I solve this problem?...

  Thanks in advance for your help.

  Hello:

  You need these drivers for the bsd...

  This package contains the driver for the JMB38X Host Controller Card Reader in laptop models supported and operating systems. JMB38X card reader supports the following types of media: SD, MS, MMC and xD.

  File name: sp45180.exe

  You probably need this driver for the unknown dev...

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

• Could not launch Kaspersky after installing Windows updates

  yesterday, 14/08/12 after installation recommended windows updates, I lost my kaspersky virus program, tried to reload the disc and has been unsuccessful, what I'm doing. After instaaled of updates, I noticed that I had lost my virus program. I tried to open it in the programs list, nothing happened. I tried to reload the disc again, nothing haoppened. I don't want to work without an antivirus program. Can you help me?

  Original title: yesterday, 14/08/12 after installation recommended windows updates, I lost my kaspersky virus program, tried to reload the disc and has been unsuccessful, what I'm doing.

  Hello

  
  1. do you receive any error messages?

  2. remember you than the update that has caused the problem?

  Method 1:
  I suggest you to uninstall Kaspersky using Kaspersky removal tool.
   
   
  Download and install the Kaspersky removal tool
  Reference: Kaspersky Internet Security 2012
  
  http://support.Kaspersky.com/FAQ/?QID=208279463
  
  Method 2: Put the computer to boot and then try to install the program
  Put the computer in a State of boot is a way to know which application is causing this problem.
  Step 1: follow the steps in the link below to do the same thing:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
   
  Note: After a repair, be sure to set the computer to start as usual as shown here:
  Step 2: To configure Windows to use a Normal startup state
  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  
  a. Click Start and then click Run.

  b. type msconfig and click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  See also:
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
  I hope this helps.

• Slow startup after installing Windows updates

  Recently I started to use internet on my laptop. After a few days my windows 7 started to take about 15-20 min to start and reach the Welcome screen. When I went to the dell store they told me to complete updates failed, who were many in number and only 6 updates succeeded. I'm not able to install the updates of windows. and so my laptop takes a long time to stsrt, and even after the boot does not work correctly.

  Original title: boot windows7 problem

  Hello

  Please contact Microsoft Community.

  I understand that you are facing the issue on Windows updates.

  I will definitely help you with this.

  Please provide the information below.

  1. you get any error message during the installation of the updates?

  2. what past exactly after you restart the computer?

  I suggest you go through the below methods:

  Method 1: Try to run the troubleshooter Windows updates:

  1. Press Windows + R key.

  2. Type command and press ENTER.

  3. Click on Troubleshooting.

  4. In the left pane, click view all.

  5. In the list, click Windows updates and run the troubleshooter.

  Method 2: Try the clean boot:

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• IRQL_NOT_LESS_OR_EQUAL 0x0000000A after installing Windows updates

  Blue screen with the following information:
  IQRL_NOT_LESS_OR_EQUAL

  STOP: OxOOOOOOOA

  I get this error for the second time in two months on a Lenovo R61 laptop after installation of the latest version of Windows Update there is very little time.  Sometimes after a few minutes after the start-up of the machine without provication.  The first time was the same scenario, but seemed to go away after a week or so mysteriously.  I used the laptop for almost a year with no problems before installing updates.

  I have Vista pre-installed with the recent updates installed.

  I don't have a new hardware or drivers that could lead to conflict - it comes factory all installed on the laptop.

  I have 2 GB of RAM, but I have a NVIDIA chipset.

  I tried the defragmentation tools, system repair, etc. without change to the problem.  Any advice?

  Hello

  Check the updates of Windows to see if a driver has been updated all the time that these questions came.

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  --------------------------------------------------------------

  My generic bluescreen problem:

  Hello

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -----------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------------------
  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  ------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.