Lotus SmartSuite 9.8 tries to install in Windows 7

Similar Questions

• Have a computer dell laptop. replaced the hard drive; tried to install my Windows XP and my product key is not accepted. I was wondering why and how do to accomplish this task.

  My dell laptop had the hard drive replaced.  My son, who knows computers, installed the new hard drive.  Then he tried to install my Windows XP Professional software - when it came time to put the product key #, it was not accepted.  It's authentic.  The product key is: * removed *.

  There no mention of this issue in section outages or other information provided in the booklet provided.  Can you help me with this problem?

  The license key and product type must match (XP Home vs XP Pro;)  (and OEM license vs the retail license).  If it's a Dell computer and you get the product key from a sticker on the case, then there is likely a version of Windows XP OEM this product key.  If you install Windows XP from a retail installation disk, then the types of licenses will not match.  You will need to use the license that accompanies the retail installation disc or you will need to contact Dell for an OEM installation disc to go with the license on your sticker case.

  HTH,
  JW

• Code 646 while trying to install updates Windows Office 2007

  While trying to install updates for Windows Office 2007, I get a code 646. I'll run updates and those for Office 2007 are not download. I am running Windows Vista Home Basic 32-bit system. Here are the updates that I am trying to download - updated security for Microsoft Office Excel 2007 (KB973593); Update of security for Microsoft Office System 2007 (KB973704); Update for the junk e-mail in Outlook 2007 (KB975960) filter; Update for Microsoft Office Word 2007 (KB974561). Permanent that I have to manually download and is there a solution to this problem. I also downloaded the Fix It program and it has not corrected. Thank you!

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Error - "the CD key you entered is invalid" when trying to install the Windows XP computer.

  Original title: Windows XP CD Key can expire?

  My old machine with Windows XP installed should be trashed. I want to install Windows XP on a netbook Eee. The Win XP CD is a CR - ROM with the retail CD. It was given by my former neighbor who worked at Microsoft and purchased at a reduced price.

  Trying to install Windows XP, I had pop-up window "you entered the CD key is not valid. I installed Windows XP Home edition using this CD key several times on my old machine, to clean the operating system after a certain period of malware infection. The CD key is certainly valid.

  So what's happening? The CD key can expire after a certain number of years? Note that what's happening during the initial installation - before the first logon. There is no internet connection. So it is not possible for the installation check if this CD key is used elsewhere.

  I tried several times. Whenever I got this error in the installation step "installation of Windows.

  The message itself is that I quoted above "the CD key you have entered is not valid.

  These are the typical reasons, you would get such a message:

  1. the user enters in the key not associated with the retail disk but another key, usually on top of the COST of the PC sticker.

  2. at least one of the characters has been entered incorrectly. This could be because of user error or a faulty keyboard.

  Just to be sure: you use a real retail CD? Or is it a generic OEM CD that was bought in a store?

  A way around this problem is to use an XP SP3 integrated in a installation CD. If your CD is SP2 or earlier, you can create one on the scale of SP3, using a process called "slipstreaming". Then everything just when it's time to enter your product key, don't! Then you will see this window:

  http://ethertubes.com/wp-content/uploads/WinXPSP3-2.PNG

  You will have 30 days to activate (and enter the product key). This page should help:

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key

• Vista Windows tried to install two windows 7

  PC is HP running on Windows Vista. Tried to install the dual-boot with Windows 7 to different partitions. Everything was fine, but had to leave to cancel installation of windows 7. The installation was incomplete.

  Now everytime I restart the PC, the display shows HP restore & Factory Reset on the loop.

  First priority is to ensure that all current data stored in windows vista is safe and not affected. Was not aware that the data was not justified. I want to go ahead with the installation of windows 7 that after it is confirmed that the data is safe.

  How can I do to ensure that the data is safe, save it and then continue the installation of windows 7. Please restore hp page guide. Student and extremely worried. Help, please.

  Hello

  First thing you want to do is to back up your data and get Vista boot once again, before you start to worry about installation of Windows 7 as a dual Boot.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  "How to use Knoppix.

  http://Lifehacker.com/192982/geek-to-live--rescue-files-with-a-boot-CD

  @@@@@@@@@@@@@@@@@@@@

  HP recovery to factory settings is just that, HP, no Microsoft software.

  It's up to you if you want to back up your data, and then reinstall, or take the risk to a non-destructive recovery of HP, which case you MAY lose all your data.

  You can try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@

  How then dual-boot Vista and Windows 7

  http://www.SevenForums.com/tutorials/5166-dual-boot-installation-Windows-7-Vista.html

  See you soon.

• tried to install essentials windows 2011 - after you download it, he can't settle down and I get message "you already have building different flavor of windows live. How can I fix it

  tried to install windows essentials 2011 - after you download it, it does not get installed to complete and I get the error message "failure, you already have building different flavor of windows live" Ox80280008

  You can find support for the installation/uninstall/upgrade Windows Live Essentials in this forum: http://answers.microsoft.com/en-us/windowslive/forum/wlinstall

  PS: Windows Live Essentials, not Windows Update, was to invite you to upgrade to Windows Live Essentials 2011 QFE3 - who made a compulsory since mid-June 2012 update. If Windows Live Messenger, etc., does not work, that's why.

• Update hangs when it tries to install in Windows 7

  just bought a new laptop from Sony with Windows 7 and immediately Windows wants to update with 35 updates.  Updated 17, system crashes, and it has been sitting there to install the update for 4 hours how to stop this and corredt problem.

  Hi Sheilancoco,
  Update froze the computer?
  If it is still frozen, cancel it.
   
  I suggest that you follow these steps and check if it works to solve the problem.
   
  Step 1:
   
  Disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc...)  Except the mouse and keyboard, then boot\start up
  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.
  Check the updates that have failed in the history of the update.

  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  c. to display more information about an update, double-click it.

   
  Step 2:
   
  If it does not solve the problem, I suggest you force shut down, restart your computer, and then temporarily disable all security software and try to install the updates.
   
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 3:
   
  If this does not resolve the problem, put your computer in a clean boot State and try to install the updates.
   
  Note: Follow step 7 to your computer as usual.
  Also see the articles of techniques to troubleshoot update issues.
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
   
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I tried to install my windows Vista updates via WINDOWS UPDATE and so far, I get an error 646 code I have tried the solutions and I have enough space on my pc.any of solutions?

  The updates are:

  Update of security for Microsoft Works 8 (KB973636)

  Update of security for Microsoft Office Excel 2007 (KB973593)

  Update of security for the viewer Microsoft Office Visio 2007 (KB973709)

  Update of security for Microsoft Office System 2007 (KB972581)

  Update of security for Microsoft Office 2007 System (KB973704)

  Update of security for Microsoft Office System 2007 (KB974234)

  Update for Microsoft Office Word 2007 (KB974561)

  I've had this problem for a few weeks now, and I don't know if it is because of some potentially dangerous sites and also had this problem a few months back and had fixed.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents but the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I tried to install the window updates that are available to me and they keep for lack of error code 80070641 and now I can't open Windows Mail.

  I start to install updates now for several days and each time that they do not.  Error code 80070641 rises now and I now have problems in Windows Mail.   The update was for the Windows desktop.   When I opened my Windows Mail... error codes are as follows: Socket 10061 error and Error 0x800CCC0E #.

  Hi colorfulvue,

  Welcome to the Microsoft Answers site

  I would like to know if you are using Windows Live mail or Windows mail in Windows 7.

  Windows 7 comes with windows live mail default and a default windows mail vista.

  If you use Windows live mail you will need to post your problem on this link:http://social.microsoft.com/forums/en-US/categories/

  I suggest download you Windows Installer CleanUp Utility from the Microsoft Download Center:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Disable all security software.

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Then run this:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Try to install the updates manually by downloading the stand-alone package after the reset of the windows components.

  Follow this link to learn more:http://support.microsoft.com/kb/934307

  All the best! Thanks and greetings Bika: MICROSOFT SUPPORT Visit our Microsoft answers feedback Forum and let us know what you think.

• Repeatedly, getting errors when trying to install the windows updates... tried all Microsoft fixed, no results, error 80070643 and 8024AFFF

  Installation and update of Windows Vista are no longer works... I tried all Microsoft fixed... nothing helps... continue to get errors and no installation, please help...

  Thank you

  Hello

  Do the following and check:

  Step 1:

  Try to do a Scan of the SFC (System File Checker). The scan will look bad system files and will attempt to fix them, if possible.

  (a) click the Start button.
  (b) type: cmd.exe in the search results.
  (c) right click the cmd.exe file and select 'run as administrator '.
  (d) in the CMD window, type: sfc/scannow and press the Enter key.
  (e) restart and see if that solves the problem.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2:

  If the problem persists, you can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know if it helps.

• Could not load the Lotus Smartsuite on new computer

  I can't get my Lotus Smartsuite to load on my new computer windows 7. IBM Web site says it runs on windows 7, it is trying to load, but my new machine 1.5 TB of hard drive and the software says I have a negative memory when loading, so it will not install. Don't want to partition, is their answer to another? Lotus Smartsuite ver 9.8.1

  Must be installed if you right-click on the Setup file and run as administrator...

  You might want to try to support IBM for this one. The installation file is possibly corrupted somehow...

  I know that organizing is very good and there was a look-a-like Organizer, who was free at the same time, but I suspect that the author was informed to scrap it.

  An alternative here (link at the top of the page). I have not tried but it can do you if you have no success with r.0.

  The other link is to many other PIM

  http://EssentialPIM.com/

  http://www.FreeDownloadsCenter.com/Information_Management/Personal_Information_Managers/

• Not able to boot after that windows update, just trying to install the number 3 setting 3, and then restart the computer. With the help of Windows Vista SP2

  Friday morning I wasn't able to boot my computer more. When I start my computer it won't seek to set a parameter nr 3 of 3. And then it restarts again. My computer tried to install some windows update settings the day before with no success. I Don t remember what it was. I got Vista SP2

  The same problem happends to my computer from friends four days, after she start a windows update installation. But it has solved its problem by using the Windows installation CD and use the repair tool.

  For me, my Windows installation CD I got from Dell does not work. Not the tool repair or startreparation. And I have no reference system to return.

  What should I do? I don't want to reinstall windows again, I have a lot of information on the computer I need to.

  All the world has noticed this problem?

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the ISP above Mathods to solve your problems, save your data using one of the methods below, and then reinstall Windows:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• What is 643 error when trying to install updates?

  When I try to install the updates, it says error 643.  unsuccessful.  also impossible to download my farm on farmville.  don't know if it is related.

  When I try to install the updates, it says error 643.  unsuccessful.  also impossible to download my farm on farmville.  don't know if it is related.

  Error 643 - there has been many comments in this regard.

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  If the error is related to the .NET Framework 4, try to repair the same first.

  Repair the installation of .net Framework 4- Windows Vista and Windows 7 users follow these steps to repair the installation of .NET Framework 4:
  Close all running applications

  1. Click Start, type Uninstall in the Search box, and then click uninstall a program
  2. Double-click Microsoft .NET Framework 4 Client Profile to start the .NET Framework 4 Client Profile Maintenance application
  3. Select Repair .NET Framework 4 Client Profile to its original state , and then click Next
  4. Allow the repair, and then click Finish
  5. Click restart now to restart your computer
  6. Visit Windows Update and try to install the updates again.

  in regards to your farm on farmville, I don't know if it is related.

  Related topics

  Get 643 and 646 error codes when you try to install Windows Update. Everything else works with updateing, Itunes and other updates, but not Microsoft. I did what is listed here as much as I can understand, but still have the problem.
  I get code 643 when I try to update what I'd do
  Error 643 trying to install .net 4.0 updated
  Error code 643 trying to install update KB953297
  ERROR CODE RECIVE 643 TRYING TO INSTALL THE WINDOWS UPDATE (KB953297)

• Impossible to install 10 Windows on Bootcamp partition

  #1

  Hello! I just tried to install Windows 10 on my Macbook with a 32 GB USB using Bootcamp. Everything was fine until I came to the part where I have to choose the partition where I want to install my Windows 10 and of course I chose the Bootcamp partition, but in fact I couldn't click on 'next' (I was so stupid and don't format it).
  So I just format the Bootcamp partition and when I tried to click 'next' he just told me 'we could not create a new partition or locate an existing one. I went through google and searched all regarding this problem and there are a lot of guys having almost the same or exactly the same 'error' when trying to install 10 Windows on the Bootcamp partition, but nothing has really helped me. I deleted everything except my USB key and someone told me that I should only have 4 partitions or less.
  He shows me the 4 partition but there are two partitions (3) and two partition (1).
  Is this a problem?
  Here is a picture of my diskutil list: https://i.gyazo.com/f554fb8aac609c2420f55f9696fa06a6.pnggiven that English is not my native language, I'm sorry for my bad spelling.
  I hope someone can help me install Windows 10 with Bootcamp! Thank you very much!

  You have a Fusion drive, which is usually not sold on a MacbookPro? You can check model/year your Mac? Please, do not post the serial number of your Mac.

  If you replaced the optical drive to create your own Fusion player, you can run the questions, depending on the year/model of your Mac.

• Install a Windows XP MCE instead of using the recovery CD

  Hello and sorry for my English

  I tried to install a Windows XP MCE "naked" instead of TOSHIBA restore CD. Because I don't need a lot of the software inside the TOSHIBA ghost. But unfortunately, the key to my certificate of authenticity of Windows in my Toshiba A100 stickers did not with a normal installation.

  Is it possible to use this key to install an original Windows XP MCE?

  N ° this key (license) belongs to the operating system shipped on your recovery media and it is not a kind of universal key that you can use with each CD installation of the full version.