Loud beep and the power on / off power during installation of the operating system 10.11.2

Someone else did this happen to them? My MacBook Pro (early 2011) making a loud beep sound and the power and turn off several times while he was installing the new os 10.11.2 update this morning? Everything seems to work fine, I've just been caught unawares. I've never had such a thing happened to me in updating my mac. Someone else?

can happen

I think the install dialog says that the mac can shut down and put into service once more.

If its works well it should be good.

Tags: Mac OS & System Software

Similar Questions

  • How to make a copy of all the software and the operating system that came stock with the laptop?

    I have a laptop that I have replaced the motherboard and now HD took a dump and should be replaced also. I need the software and the operating system disk, so I can restore the operating system to order.

    Please advise!

    This link will take you to a web document that explains how to order a recovery for the initially installed operating system disk.

    Here is the support for your laptop computer portal.

    Best regards

    ERICO

  • Hard drive swapping and the operating system between two laptops of R61e

    I have a R61e who broke chassis. Not a left hinge broken, but broke up chassis where the left hinge connects.

    I have the opportunity to buy a used one with no operating system.

    Both are of type 7650 and all have two 80 GB hard drive.

    Will it work if I just reverse this HARD drive with the operating system for the new portable computer?

    Yes, it should work without major problems.

    In the worst cases, you need to update to a couple of pilots.

    Good luck.

  • VMware - script the creation of the vm and the operating system installation process

    Hello.

    Trying to determine the exact steps to automate the entire process of creating a virtual machine, and install a linux OS (Rhel/Centos) in the virtual machine. I need to understand the steps to do it entirely from the CLI using scripts. I have seen a few sites that describe the basic process of creation of the VM, which appears to generate the vmdk file.

    I've seen nothing that shows what needs to happen to install the operating system in the virtual machine, in the CLI. This process should be auto/programming, so I can't use the GUI.

    I imagine that the whole process will have to call the process/kickstart file and start from that somehow, but I don't see how the elements fit. The goal is to then have a VM with the required OS/Apps that are then run / deployed by external users on their machines.

    If this process can work, then we can talk to a Council-expert/vmware on the next phase of the project.

    Answer that be detailing how to proceed, or point of item/sites on that would be great!

    Thank you

    I just tested on a Linux system and had to perform the installation of VMware VIX - 1.10.1 - 266898 two times.  It is not the first time without any message in the log file.

    After a successful installation, I ran a .vmx without first modifying the /usr/lib/vmware-vix/vixwrapper-config.txt file and received the error message waited on the specified version was not found and then after editing it, I was able to run the .vmx using vmrun nogui.

  • How can I move my files and the operating system on a new hard disk on Inspiron 580 s.

    My hard drive failed Diagnostics recently and needs to be replaced.  I have since installed a new hard drive in Bay 2. I need to move everything from the old drive to the new drive and delete the old which is completed. So what is the best way to go about this?

    pjrl

    The simplest method, I prefer to install a replacement hard drive, is to clone the existing hard drive to the new, that will also transfer all applications and programs.

    You need an imaging utility, similar to True Image Home 2015.

    http://www.Acronis.com/homecomputing/products/TrueImage

    Acronis resize partitions transferred to match the size of the new hard drive.

    Hard drive manufacturers, also have their own free cloning software available, but it can be used only with their hard drives.

    First, install the new drive as the secondary and the image of the main hard drive in it.

    Immediately after the cloning, shut down the system, switch the data cable [SATA port 0] to the new disk, making the new master hard drive and see if the system boots properly.

    Start the system with only the new hard drive connected.

    Be sure to leave the original drive disconnected, until the new hard drive is working to your satisfaction.

    Before cloning a hard drive, make sure that the existing drive has no corruption or virus on it, because they will be transferred to the new hard drive.

    It will take a second SATA data cable, there should be a spare connector to SATA power inside the housing.

    Bev.

  • Advantages and disadvantages of adding programs and the operating system windows to mac?

    For a long time Windows user., new Mac user. What are the advantages and disadvantages of the addition of the windows operating system and programs for the MacBook Pro? I use word and excel regularly, but not yet sure I want or should add capacity to my new Mac.

    If you need Windows programs that don't have any equivalent of Mac, there is nothing wrong with it.  I have not because I didn't need Windows programs.

    But...

    If you do, you must decide if you need full-system-resources (Bootcamp, boot sector corrupted system, OSX will sleep while Windows is running) or just one-environment virtual (VM, share system resources, runs as a 'guest' to OSX at the same time as OSX).  Bootcamp will have part of your partitioned drive so make sure you have spare disk space.

    And if you go Bootcamp, position and spend time in the Bootcamp Boot Camp forum where lonely T is an expert who can guide you.

  • CS5 and the operating system upgrade to Windows 10

    I have Photoshop CS5 running on Windows 7 X 64. My operating system will be upgraded to Windows 10 in late July, through Windows Update. It will break my installation? I need to block the upgrade?

    Permanently disable before even trying! The activation system just don't like the changes made to the system, and most certainly will not work afterwards. A reinstall of the CS5 will probably be necessary anyway.

    Mylenium

  • Product key for disk and the operating system of recovery

    Hi all

    My question is this - if I ordered a newly purchased set of recovery disc for my DV9700 laptop, done com with a new operating system product key? Or should I use the product key, attached to the laptop? Reason I ask is due to the couple of characters/numbers of the key product is barely understandable. I have to use the old product key, if not it means that the product key itself is stored in the BIOS or there is a set (list) fixed to the product on the recovery for key disc are compared to?

    Someone better, please enlighten me. Thank you

    Tom

    When you reinstall using HP recovery disks, it will be pre-activated key installed, you don't have to do anything

    The recovery disks must be for this particular model of Notebook, when you start the Recovery Manager it checks the bios for what is called a tattoo, the tattoo contains information on the laptop, the serial number, model number, number of motherboard, they should match the disks. Nothing to do with the VLK.

    VLK = key Volume License

    Looks like the seller tried to install Vista recovery disk no HP.

    "I should be able to use the recovery disk for my mobile dv9825nr on any other dv9825nr laoptop, right?"

    Yes

    .

  • I need help and I did everything but replace my computer and the operating system.

    I invaded by the windows updates, drivers, hardware (found and installed by administrators network supposed recntly) IE9, won ' t hold my settings and my user rights change daily.  I can even find another computer in the supposed network, which I have added.  While trying to burn a backup cd, two days ago my computer started smoking and my blue ray player was no longer working.  I found an extended partition on my drive that I cannot format and cannot be accessed.  When I reinstall, as soon as it starts the first time, there are programs and updates already made, but I can't get an internet connection.

    Hello

    If the computer is in a domain environment, then please contact the system administrator or network administrator to get it resolved.

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums

    http://social.technet.Microsoft.com/forums/en/category/w7itpro

  • My system has been repaired and the operating system has been replaced by a non-genuine version of Windows. How do we install the real version I used to have back?

    Windows vista installation

    my computer has been repaired and reinstalled with a non-genuine version of the window. I have now the true window vista but I don't know how to do in this regard.

    I just insert the disk and follow the instructions?

    Hello

    You need to change the Boot order to make the CD/DVD drive 1st in the boot order, then restart with the Vista DVD in the drive and follow the instructions.

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    Here's how to do a clean install

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    See you soon.

  • Adobe CS4 products and the operating system Windows 10

    Everyone has problems running DreamWeaver (I have CS4) or PhotoShop Elements 7 on the new OS of Windows 10?

    I do not know whether or how well former products will perform in Win10.  CS4 is too old to be eligible for updates now.  But my guess is that if it ran OK on Win 8.1, it could work with Win10.  My advice is to run the compatibility checker. Or Win10 to test on a 2nd machine.

    http://www.groovypost.com/HOWTO/check-computer-runs-Windows-10/

    Nancy O.

  • I try to activate Premuim Design CS2 on a machine, after it crashed and the operating system has been reloaded

    Because the system crashed I was not able to disable the previous instalation - can someone please help me with how to do this? Thank you

    The old facility will be inconsequential because it cannot be restored in any case.  Please see the following:

    Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 -.

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  • Error! The CPU was displayed by the operating system of Fords. Power off or reset the virtual machine

    Why when I try install Mac Os Yosemite in VMwareplayer when the virtual machine starts, I get this error:

    The CPU was displayed by the operating system of Fords. Power off or reset the virtual machine

    I have an AMD A10 processor

    VMware does not support the operation of Mac OS X in VMware Player/workstation!  Also, legally virtualisables versions of OS X running in a Virtual Machine can be done when done in the Apple brand hardware but when done while running under OS X, and for that, you need VMware Fusion not VMware Player/Workstation (or use ESX/ESXi on Apple brand hardware) you violate Apple's SLA for this product.  So any help can you provided for OS X in this use of the scenarios that it would violate the community VMware operating conditions to do.

  • HP Pavilion HPE H8 1234: HP Pavilion HPE H8 1234 corrupted BIo 8 beeps and the led lights

    I was updating my BIOS and I got an error. Now, the coomputer starts with 8 beeps and 8 power botton blinking LED. IV tried WIndows update Bios USB, key and B. Im running outta ideals. Someone help me please.

    Hello

    Situations of BIOS corrupted can be not recoverable with some versions of the HP BIOS.

    Disconnect the PC and remove CMOS battery and press and hold the power button for 60 seconds. While the battery is removed, test it with a voltmeter-ohm - and if it isn't close to 3.3 volts, then replace it.  It's a $4 item.  If the battery is good before you reinstall it, plug the PC back in and give it a go.

    This procedure of recovery of the HP BIOS claims to work by internal HP.  Read the instructions carefully.

  • Windows XP. The system power finished on the computer self-test now booting of the operating system

    When booting from XP PRO I get this audible, ' system completed power on self test.» Computer, now the startup of the operating system. ». How can I disable this audible?

    1. turn off your PC
    2. start your PC
    3. press the DEL key (or whatever key allows you to access your BIOS) on your keyboard while it is booting (it has a message when, but no matter.
    4. you are now inside the BIOS
    5. go to the Advanced tab, then configuration of device e/s-which is the way down
    6. go to the POST Reporter speech, click Enter, and then turn it.
    7 does.

Maybe you are looking for