loud beep sound and warning

Similar Questions

• Satellite P100-195 - loud beep sound card problem

  Hi guys.

  I bought a Toshiba Satellite P100-195, about two weeks ago and since I had a problem with my sound card I do not seem to be able to overcome. Whenever I have to increase/decrease the volume (or audio icon in the system tray or the control panel) I get a loud beep after I let go of the mouse button.

  The sound seems to work fine, but the tone is getting stronger every time I increase the volume and is really annoying. I also noticed that whenever I got an audio/video conversion Canopus Procoder 2 I get the same tone, even if the converted files are well and plays well. My Satellite P100-195 was a Portuguese Windows Professional MCE.

  The beep will be like a BIOS we and not a BONE.
  I already reinstalled the audio driver.
  Can someone help me with this?

  Jose Felix

  Hello

  Is - this loud beep appear on a fresh install that BONES form the Toshiba Recovery CD?

  The second possibility is that your operating system has put this loud beep as a program event.
  Go to sound and audio devices and select the Audio tab.

  Here, you can see all your sounds that are set on the different program events.

• strange monitor beep sound and blank when I installed the graphics card XFX Radeon HD 7870

  OK, so I removed my GTX 555 after that I bought a brand new XFX HD 7870, installed and activated on the pc.
  The monitor was empty and the pc tower was 5 beep sounds, then pause and repeat, over and over again until I turned off. When I replaced the GTX 555, all was well again, so I know this isn't the other components.
  Any suggestions?

  See http://products.xfxforce.com/en-gb/Graphics_Cards/AMD_Radeon%E2%84%A2_HD_7870/FX-787A-CDFC.

  You will need an adapter and you may need a new power supply.  Note the minimum requirement of the PSU of 500w.

• New installed graphics cards makes beep sound and no response from the monitor

  Hello.

  I have a hp pro 3300 micro Tower. I installed a new card from nvidia quadrophonic 420 graphics.

  When I start the pc I hear 4 beeps and then nothing. The screen is blank

  eager to help

  D

  Hello:

  4 beeps is a problem with the power supply.

• Beeping sound and flashing - Satellite A100-200 at the beginning upward

  My Satellite A100-200 is three months old and stopped working. When I start there is a continuous beep and a flasher above the hard drive indicator.

  Is that what I can do or is it a warranty repair

  Hello

  stop your machine immediately, or that you have installed things before? Have you tried to remove the hard drive and if you have 2 RAM modules at least one of them?

  If all fails, you will need to give your machine a local service partner. They will then solve your problem.

  Welcome them

• 500-300na Pavilion: problem with Pavilion 500-300na (mother of Memphis-S) - Dead / no beeps sound and video

  Hello - I hope someone can help me please
  
  I have desktop PC HP Pavilion 500-300na.
  The PC worked very well without problem - I went for a stay of two weeks during which the PC was not in use and power was turned off. I'm back from vacation and the PC does not work now.
  
  When you press the power button, the LED lights up, CPU fan, electric fan and the two spin system fan. There is no video. There is no beep error codes. What is it - actually dead.
  If I hold the button for about 5 to 10 seconds, the fans run down, but the rest spinning CPU fan.
  
  What I've done so far:

  Tried another monitor.
  Tried a different power supply.
  Powered by the motherboard on its own with any other disconnected.
  Taken the Cmos battery on the motherboard for 1 min and replaced it.
  Clean the dust from the fans (they were not so bad as to be honest).
  
  The machine worked with in PCI16 slot video card - I removed this for the test. As I can't get into the Bios, I can't put in the work of the "mother video card." Not sure if it is a problem.
  The unit has a strip of 8 GB of ram DDR3 - I tried this in another location without any changes.
  I have not tested the ram. I have not tested the CPU or deleted one of the fans / heat sinks.
  
  Thanks for any help you can provide
  Chris

  Okay, I think THAT I managed to fix it and understand what the problem was.
  
  I think the problem was double - first of all, before the problem started, Technical Assistance from HP have a BIOS update and download. I think that this update changed the Startup Configuration in the BIOS to "ENABLED" Secure.
  
  Not really a problem. . BUT...
  
  The video card I was running was a riser and secure boot DISABLED neeeded and legacy support ENABLED.
  
  I have reset the BIOS using the jumper (bios password) information – I also did a 'blind' changing information from the bios to switch to the use of the video of the motherboard (bash F10 for 10 seconds at the start, then three arrows down, then two returns... This pass BIOS to "Apply default settings and exit"). I don't know who really helped, but the machine comes up in life.
  
  I put the information here, in which case another experience a similar problem.
  
  Chris

• Loud beep and the power on / off power during installation of the operating system 10.11.2

  Someone else did this happen to them? My MacBook Pro (early 2011) making a loud beep sound and the power and turn off several times while he was installing the new os 10.11.2 update this morning? Everything seems to work fine, I've just been caught unawares. I've never had such a thing happened to me in updating my mac. Someone else?

  can happen

  I think the install dialog says that the mac can shut down and put into service once more.

  If its works well it should be good.

• Inspiron M5030 7 no beeps again and again, no start

  My wife has surfing the net and watching TV last night when its Inspiron M5030 got the blue screen of death.  There were no other errors or problems of performance so far.  When she tried to restart, the laptop just 7 loud beeps over and over again.  Have followed the suggestions found elsewhere in this forum, unplugged the power cord, removed the battery, hold the Start button for 30 seconds, tried to restart, but got the same result.

  Inspiron 15 (M5030)
  Service Tag:

  ADMIN NOTE: maintain the label removed by privacy policy >

  After reading this forum, I found a lot of people have had the beeps 7 to the problem starting with the M5030.  I had very good experience with Dell over the last 8 years, so it is sad to see so many bad comments about them here.  In my business, if there is a known, issue of you just do the right thing, period.

  The warranty is up, if anyone has any suggestions?

  Thank you

  Jim

  Reflow of the chips.

  cs_setInnerHtml ('video_91328171-c72e - 4 c 53-8944-33cb4bc2d215', "); cs_setInnerHtml ('video_10747fa4-f788 - 43d 8-b942-63595a8d4b95', ");

• His problem, I've disabled all sounds and disabled my sound card. There is always a warning tone. Why?

  Original title: sound problem

  I've disabled all sounds and disabled my sound card. There is always a warning tone. Why?

  Hello

  When does this beep?

  It probably comes from the speaker of your motherboard.

  Listen to the PC (put close your ear) while producing the sound and then compare it with putting your ear near a speaker.

  Tricky

• After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

  After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

  Open Safari while holding the SHIFT key

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Help! W500 dead. Is update system, restarted itself, makes 3 loud beeps and thats all!

  I just changed my hard drive, stuck in a windows 7 cd, successfully installed. Chrome, dropbox and update system installed. Ran Lenovo update system and at one point the computer restarted itself, made three loud beeps (long followed by two short) and that's it.

  The bluetooth led is on, as it is powered, battery and charger lamps. The screen is dead.

  That's happened? What are these three beeps? What should I do?

  It turns out that my new HDD is loose. Something must be done to ensure that it does not move.

  It was a scary time.

• S10e - loud beep on AC connect and disconnect!

  Hi everyone - first post here!

  My Lenovo S10e supplied with Suse Linux Enterprise Desktop, and it works now openSUSE 11.1. I love it! But I'm always in the first weeks congested and still working on the kinks. And here's one:

  Every time I have connect or disconnect the AC, I get a very loud beep, which is a real nuisance in the library, and even around the House! I'd love to be able to disable the beep, but as far as I can tell it is a level BIOS setting BIOS give no option to adjust.

  All the forums I've found offer a solution only for Windows. If there is an update of the BIOS, which makes it possible to disable the beep, I think I wouldn't be able to apply it in any case, since it would be distributed in the form of a windows .exe. But I bought the device with an operating system Linux is preinstalled. Surely, there must be an upgrade of the BIOS that come to us?

  Anyone have any suggestions here?

  Thank you very much!

  
  

• Aspire T180 won't start and makes a beep sound

  My Aspire T180 not boot at all and makes a beep sound. The monitor doesn't wake up. The sound signal is a long beep followed of two short beeps - all in about one second of 1 1/2 to 2 life. My nephew has recently completed a 2-year computer program. I had to listen to him over the phone and he immediately said "Oh!" Your memory is bad! »

  A second opinion? And if it's a memory problem, the two modules DDR2 which are to replace, or something deeper? Any help will be appreciated. Thanks in advance.

  1 long, 2 short beeps

  Error message - video system failure

  Description - an error has occurred in the ROM BIOS video, or a failure to trace level was met.

  Trye first resetting the BIOS, remove the battery for about 5 min and put again, check if its help.

  Otherwise get out your DDR2 modules and only for slot which was empty before connecting.

  If you have integrated graphics card, use of trye update one if you have on your motherboard.

• Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera focuses

  Hello, I have problems with my Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera is focusing. If I put it to my ear, the sound is low but I can still here it when it focuses.

  Hello

  Thanks for posting in the Microsoft Community Forum.

  I understand from your description, that you get beep when the camera is focusing.

  To better understand the question, please answer the following questions:

  1. have you made changes on the computer before this problem?
  2. is it works much earlier?

  Come back with more information to help you better.

  I suggest you to download and install the latest drivers for Microsoft Lifecam 5000 from the link provided:

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-VX-5000

  You can even try recording by reducing the volume on the computer to the minimum level (mute) just to check if beep occurs.

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  For more information, see the link below:

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

  Thank you.

• Problems with the computer automatically recording of surrounding sounds and play loudly on Windows 10.

  Original title: Sound

  Hey,.

  My laptop records the surrounding sounds and plays loudly and I have no idea how to turn it off.

  I hope someone can help me.

  ASUS X555L, Windows 8

  Hi Felix,.

  Thank you for your response with the current state of the question.

  I suggest you to make pregnant as default device and also keep microphone also disable.

  1. right click on the sound icon that is in the lower left corner of your screen under the system icons.

  2. Select the playback device.

  3. click on the Read tab, and then select a speaker from the list and then click set as default.

  Let us know if you need further assistance on related issues of Windows and we will be happy to help you.