Love at first sight not to close properly

Hello, Im using now the macbook pro retina display 13 inch end of 2013
just to have the current OSX update which is 10.11.4, his work fine until I go to my windows 10 (bootcamp)

then when I stopped my macbook, the IO thunderbolt by giving power to my usb hub.
to completely stop my macbook bootcamp, is to run OSX and do the correct stop OSX
When you shutdown windows 10, he leaves sight IO with power.
I guess the firmware bug? If you didn't understand my explanation please post and let me give you a few videos to show how is my problem.
Sorry for the bad English.

Please see still in power after his stop USB ports .

Tags: Windows Software

Similar Questions

  • Love at first sight and disk utility

    Hello

    With the old version of disk utility, I could start in the repair using the command + R section, click disk utility, and then copy my computer perfect HD over to another Mac connected via Thunderbolt and in target disk mode. This process took about 7 minutes. Is it possible to do it again? Use the migration wizard is not a viable option because it takes over 30 minutes to copy it to the users and applications and I have several computer at image Labs.

    You try to restore your hard drive to another on a target machine?     If so, you can always do this.   Reboot from Recovery HD and use disk utility.  To 1 restore another disc, you select 1st target drive.  Then on the Edit menu, select Restore.  Then in the drop-down list, select the source drive.  If you love at first sight, this should go pretty fast.

  • Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

    Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

    N ° you need a computer logic board which has built in Thunderbolt.

  • 2012 MacBook Air not to close properly

    Hello

    I had problems with my MacBook Air from mid-2012. Lately he has not been able to restart without manual stop or stop in the Terminal (sudo reboot). I noticed that when I try, disappears from the menu bar at the top and Finder is unresponsive. I have reset the memory NVRAM and the SMC and have not made any progress. Here is the report of system EtreCheck:

    EtreCheck version: 2.9.12 (265)

    Report generated 2016-06-19 11:21:41

    Download https://etrecheck.com EtreCheck

    Time 01:33

    Performance: Excellent

    Click the [Support] links to help with non-Apple products.

    Click the [details] links for more information on this line.

    : Another problem

    Description:

    Mac not to close properly

    Hardware information: ⓘ

    MacBook Air (11 inch, mid-2012)

    [Technical details] - [User Guide] - [warranty & Service]

    MacBook Air - model: MacBookAir5, 1

    1 2 GHz Intel Core i7 CPU: 2 strands

    8 GB RAM not extensible

    BANK 0/DIMM0

    OK 4 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 4 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en0: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 624

    Video information: ⓘ

    Graphics Intel HD 4000

    Color LCD 1366 x 768

    System software: ⓘ

    OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

    Disk information: ⓘ

    TS480GJDM520 disk0: (480,1 GB) (Solid State - TRIM: No.)

    EFI (disk0s1) < not mounted >: 210 MB

    Macintosh HD (disk0s2) /: 400,24 (Go 180,49 free)

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    BOOTCAMP (disk0s4) / Volumes/BOOTCAMP: 79,00 (GB 32.96 free)

    USB information: ⓘ

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. Apple keyboard / Trackpad

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Information crush: ⓘ

    Apple Inc. Thunderbolt_bus.

    Goalkeeper: ⓘ

    Mac App Store and identified developers

    Kernel Extensions: ⓘ

    /Applications/TunnelBlick.app

    [no charge] net.tunnelblick.tap (20141104 (Tunnelblick build 4560) - 2016-05-03) [Support]

    [no charge] net.tunnelblick.tun (20141104 (Tunnelblick build 4560) - 2016-05-03) [Support]

    / Library/Application Support/PeerGuardian

    xxx.qnation.PeerGuardian [no charge] (1.1.11 - SDK 10.2 - 2014-11-07) [Support]

    / Library/Application Support/VirtualBox

    [loading] org.virtualbox.kext.VBoxDrv (5.0.20 - 2016-05-09) [Support]

    [loading] org.virtualbox.kext.VBoxNetAdp (5.0.20 - 2016-05-09) [Support]

    [loading] org.virtualbox.kext.VBoxNetFlt (5.0.20 - 2016-05-09) [Support]

    [loading] org.virtualbox.kext.VBoxUSB (5.0.20 - 2016-05-09) [Support]

    / Library/Extensions

    [loading] com.cyberic.SmoothMouse (1.0.10 - SDK 10.8 - 2016-06-07) [Support]

    [loading] com.logmein.hamachi (1.0.0 - SDK 10.9 - 2016-06-07) [Support]

    / System/Library/Extensions

    com [no charge]. FTDI.driver.FTDIUSBSerialDriver (2.2.18 - 10.6 SDK - 2016-06-07) [Support]

    [loading] com.intel.kext.intelhaxm (1.1.1 - SDK 10.9 - 2016-06-07) [Support]

    com.marvell.kext.USBGenericPrinterClass [no charge] (1.0.0 - 2016-06-07) [Support]

    com.microsoft.driver.MicrosoftMouse [no charge] (8.2 - 2016-06-07) [Support]

    com.Wacom.kext.pentablet [no charge] (Tablet Chart 5.3.2 - 2 - SDK 10.8 - 2016-06-07) [Support]

    /System/Library/Extensions/MicrosoftMouse.kext/contents/plugins

    com.microsoft.driver.MicrosoftMouseBluetooth [no charge] (8.2 - 2011-07-27) [Support]

    com.microsoft.driver.MicrosoftMouseUSB [no charge] (8.2 - 2011-07-27) [Support]

    Launch system officers: ⓘ

    [loaded] 7 tasks Apple

    [loading] 162 tasks Apple

    [operation] 69 tasks Apple

    Demons of launch system: ⓘ

    [loading] com.intel.haxm.plist (2014-10-31) [Support]

    [loaded] 45 tasks Apple

    [loading] 162 tasks Apple

    [operation] 84 tasks Apple

    Launch officers: ⓘ

    [operation] com.barnesandnoble.nookconnect.plist (2013-05-02) [Support]

    [failure] com.logmein.hamachimb.plist (2015-09-03) [Support]

    [loading] com.oracle.java.Java - Updater.plist (2013-02-08) [Support]

    [operation] com.wacom.pentablet.plist (2012-12-11) [Support]

    [loading] org.macosforge.xquartz.startx.plist (2015-10-16) [Support]

    Launch of the demons: ⓘ

    [loading] com.adobe.fpsaud.plist (2016-06-13) [Support]

    [loading] com.cloudpath.maccmd.plist (2012-09-04) [Support]

    [operation] com.logmein.hamachi.plist (2015-09-03) [Support]

    [operation] com.makerbot.conveyor.plist (2016-01-04) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

    [loading] com.oracle.java.Helper - Tool.plist (2013-02-08) [Support]

    [loading] com.transcend.TSRecoverHandlerHelp.plist (2015-12-29) [Support]

    [operation] com.transcend.TSSleepHandlerHelp.plist (2015-12-29) [Support]

    [loading] com.transcend.TSTRIMHandlerHelp.plist (2015-12-29) [Support]

    [loading] net.tunnelblick.tunnelblick.tunnelblickd.plist (2016-06-13) [Support]

    [loading] org.macosforge.xquartz.privileged_startx.plist (2015-10-16) [Support]

    org.VirtualBox.startup.plist [no charge] (2016-05-09) [Support]

    [loading] xxx.qnation.PeerGuardian.locum.plist (2012-08-28) [Support]

    Launch User Agents: ⓘ

    [failure] com.adobe.ARM. [...]. plist (2014-09-30) [Support]

    [operation] com.cyberic.smoothmouse.plist (2015-07-26) [Support]

    [loading] com.cyberic.smoothmouseupdater.plist (2014-11-25) [Support]

    [operation] com.hp.printerAgent.plist (2011-08-30) [Support]

    [loading] com.valvesoftware.steamclean.plist (2016-06-08) [Support]

    [loading] net.tunnelblick.tunnelblick.LaunchAtLogin.plist (2016-05-03) [Support]

    org.VirtualBox.vboxwebsrv.plist [no charge] (2015-09-10) [Support]

    User login items: ⓘ

    Workflow application (/ Applications/Flux.app)

    AppTrap application (/ Library/PreferencePanes/AppTrap.prefPane/Contents/Resources/AppTrap.app)

    Application of caffeine (/ Applications/Caffeine.app)

    BambooCore Application (/ Library/Application Support/Wacom/BambooCore.app)

    Other applications: ⓘ

    [ongoing] com.etresoft.EtreCheck.297312

    [ongoing] com.lightheadsw.caffeine.128992

    [ongoing] com.wacom.BambooCore.92192

    [ongoing] com.wacom.Consumer_TouchDriver.95392

    [ongoing] com.wacom.TabletDriver.95712

    [ongoing] org.herf.Flux.49312

    [ongoing] org.Mozilla.Firefox.67552

    [ongoing] se.konstochvanligasaker.AppTrap.94112

    [loading] 414 tasks Apple

    [operation] 185 tasks Apple

    Internet Plug-ins: ⓘ

    JavaAppletPlugin: Java 8 66 update build 17 version Check (2015-12-30)

    WacomNetscape: 2.1.0 - 1 - SDK 10.8 (2012-12-11) [Support]

    Default browser: 601 - SDK 10.11 (2016-06-01)

    WacomTabletPlugin: WacomTabletPlugin 2.1.0.2 (2012-12-11) [Support]

    AdobePDFViewerNPAPI: 11.0.09 - SDK 10.6 (2014-09-12) [Support]

    FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-06-19) [Support]

    Silverlight: 5.1.41212.0 - SDK 10.6 (2016-01-29) [Support]

    QuickTime Plugin: 7.7.3 (2016-06-01)

    Flash Player: 22.0.0.192 - SDK 10.9 (2016-06-19) [Support]

    Mathematica: 9.0.0.3824331 (2013-01-31) [Support]

    SharePointBrowserPlugin: 14.0.0 (2010-08-25) [Support]

    AdobePDFViewer: 11.0.09 - SDK 10.6 (2014-09-12) [Support]

    DirectorShockwave: 12.1.3r153 - SDK 10.6 (2014-06-24) [Support]

    The Safari Extensions: ⓘ

    Adblock more - Eyeo GmbH - https://adblockplus.org/ (2016-02-16)

    3rd party preference panes: ⓘ

    AppTrap (2012-08-24) [Support]

    Flash Player (2016-06-13) [Support]

    Java (2015-12-30) [Support]

    SmoothMouse (2014-11-25) [Support]

    Time Machine: ⓘ

    Skip system files: No.

    Mobile backups: WE

    Automatic backup: YES

    Volumes to back up:

    Macintosh HD: Disc size: 400,24 GB disc used: 219,76 GB

    Destinations:

    1 TB [Local]

    Total size: 999,83 GB

    Total number of backups: 5

    An older backup: 25/12/15, 14:11

    Last backup: 23/03/16, 03:23

    Size of backup drive: adequate

    Backup size 999,83 GB > (disc 219,76 GB X 3)

    Top of page process CPU: ⓘ

    Firefox 8%

    3% activity monitor

    3% WindowServer

    3% sysmond

    2% fontd

    Top of the process of memory: ⓘ

    Firefox 860 MB

    714 MB kernel_task

    Mdworker (4) 188 MB

    Mds_stores 156 MB

    UserEventAgent (2) 115 MB

    Information about virtual memory: ⓘ

    1.14 GB of free RAM

    6.85 GB RAM (1.69 GB being cached) used

    Used Swap 0 B

    Diagnostic information: ⓘ

    19 June 2016, 11:05:52 self-test - spent

    A few months ago, I tried to install Linux as a dual boot and had to wipe my drive but have not had any problems in the meantime. I currently have a Boot Camp Windows 10 partition, but it was installed some time ago. This could be my problem or is this something tied to the side Mac?

    Thanks for any help you have to offer!

    Remove the Wacom software, it is a known problem in 10.11.5

    Also check all Wacom is removed from Log-in Items(use the) Sys Preferences > users and groups > login items

    If Wacom tablet etc. is vital for your workflow — after remove you and test your machine - try to download the most updated the driver from Wacom.

  • Using a disc of love at first sight with thunderbolt-gigabit adapter

    Hello.

    I have a bit of a strange situation.

    I bought an IMAC 27 the retina used 5 k with a SSD of 256. end of 2015 model - still under warranty.   Frame background... before I made the purchase, I called in the SN and the Apple representative said that she had a 1 TB fusion drive.  It turns out it's a SSD of 256 custom. Great machine, nice and fast, but the disk is too small to hold all the photos we have on site. I called apple and they said, it is easy to put the photos on a disc of love at first sight and it wouldn't make much a difference of access time for the photos as thunderbolt comms is actually faster than the speed of the drive SATA external drive.

    Now for what is strange.

    I don't want a hard drive off my IMAC clean looking nice.    I have however ethernet cable in the wall.

    Does anyone know if I can use a gigabit for thunder bolt on side installation mac converter, use the ethernet cable wall I allows me to drive to the top of my structured cabling Panel, then connect the drive to love at first sight with another converter gigabit/crush?

    To them and to specify that the installation again:

    -IMAC

    -crush / converter gigabit

    -about 100 feet of ethernet cable

    -crush / converter gigabit

    -By car thunderbolt

    or am I crazy?

    upgrade the drive on the IMAC without voiding the warranty is WAYYY expensive.

    See you soon

    Mac

    You do a lot of complex, just get an of:

    https://www.twelvesouth.com/product/backpack-for-iMac

    hook upward drive external hard and you're done.

  • Love at first sight for usb cable will work for migration?

    Love at first sight for usb cable will work for migration?

    Migration from what to what?

  • Extension of love at first sight. Will it work?

    The thunderbolt attached my Thunderbolt display cable is about a foot short of my Mac Pro. I see where it is is an extension of 1 meter (man/woman), available per person interposed. This will affect working on FCP X on my screen?

    Thank you.

    See you soon.

    Tom

    Last time I looked, there was no work of extensions for love at first sight. Everything that makes that claim ends up being a Mini DisplayPort cable.

    Could you please send link to the device that you are considering?

    How long is the one you have?

    How long is the one you need?

  • verticle display orientation portrait of the ipad on a screen of 27 "love at first sight

    We are creating a library-offer an internet point to display multiple pages of a website in the best possible way. These pages are long and better suited to portrait view. Us have an impact of lightning 27 "display and could use an ipad anyway. I am currently looking to somewhat expensive ipad mini w/cell on the amazon warehouse MD540LL/A and MD537LL/A model numbers.

    The first question is (with a screen designed to turn base), understand that this view portrait; the ipad will be enough for the display of the portrait of websites and surf?

    The second question is, will I get the best resolution in this way?

    I understand a lot of resolutions orientation landscape for various applications, but not him did not do anything with a monitor in portrait mode.

    Thank you!

    Hello. You hope to connect the iPad to the screen? It will be a little tricky. Apple has an audio/video adapter, but it is more designed for video playback on a screen. You then need to AirPlay would reflect the screen of the iPad, which may not give the best resolution. Also, I'm not sure of the rotation of the screen to portrait orientation. I have what is normally managed by a computer interface. You must borrow an iPad and experiment with this configuration before committing. A low-cost Mac could better serve you.

  • Two monitors to HP ZBook 17 F0V57ET (love at first sight and displayport)

    Dear Hp,

    Recently I bought a HP ZBook 17 F0V57ET which is great for my work, the study and the release for consumption!

    But miss me something credential which is, I would like to connect 2 left more 19 "monitors DVI - D to my ZBook. I thought that it would be possible to connect using the connector display port (--> DVI cable displayport) and the other by the thunderbolt (stroke of lightning-> DVI cable) connector

    But to my knowledge some graphics cards have the digital video of the connectors (e.g. displayport, HDMI, mini displayport) directly related to each other and not is able to display a monitor at a time.

    So before buying the cable and 2 wall brackets for monitor I would really like to know if this is possible.

    I hope to hear soon!

    Thank you!

    Hello MartijnVanZ,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I understand that you want to connect two monitors to your laptop, and I'd be happy to guide you to a resolution!

    Since your HP ZBook 17 F0V57ET is a commercial product, I suggest you post in the trade forums to get your request more exposure. This is possible by following this link:

    http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/BD-p/BSC-274

    In addition, you can follow this document to using twoor more monitors with a computer (Windows 8). This should help you to set up two monitors to your computer.

    I hope this helps!

    Best regards

  • I need to transfer my OS to iMac with firewire for Mac mini with love at first sight. Don't know what to do.

    Hello I have a 2010 iMac Core i3 3.2 GHz, 8 GB of memory, and El Capitan mid with a firewire 800 port that goes wrong. I just bought a Mac mini refurbished end of 2014 Apple, Core i5, clocked at 2.6 GHz with 8 GB of memory with thunderbolt 2 ports (but unspecified OS, I guess Yosemite 10.10 if Apple put the original on the renovated units OS) I want to use migration assistant to transfer all of the iMac with firewire for the Mac mini with the crush.  Can I use thunderbolt Apple firewire adapter for it? If this is not the case, what can I do? Any help would be greatly appreciated. Thank you for your time.

    Yes, you can.

    (144741)

  • Love at first sight for adapter Firewire under El Capital

    Hi there music pros

    Read a post saying that under El Capitan, you can no longer connect firewire devices, (such as Motu 828 Mk3 (firewire)) for new iMacs and El Capitan, using the Thunderbolt adapter Firewire apple, ' cos El Capitan does "not support firewire. This info seems inaccurate for me because the adapter must "adapt", but you never know.
    I intend to use my Motu 828 mk3 X consistently, work with the new iMac 5K, which is on the way, through the apple Thunderbolt to Firewire adapter cable.
    Can someone let me know if it is allowed to use the adapter or not?
    Thanks in advance
    Concerning

    I can't speak for the Motu. But I use the latest version of el capitan with a Presonus interface adapter and it works perfectly.

    Bolt of lightning to FireWire 400. I believe, but have to look - lightning to 800 adapter - cable then 800 to 400.

  • Wired connection without love at first sight?

    I need to update the software for my router at home. (The router were made by Netgear).

    At the beginning of the instructions, it says this: "to avoid the problem of disconnection during the process of the firmware download wireless, NETGEAR recommends this firmware update be performed on a computer with wired connection.

    I don't know how to connect my Macbook Air to the modem with a cable, since it seems that there is no port for this.

    It seems that I might be able to buy a "Thunderbolt" adapter for $29, but that seems like a piece of expensive hardware because I need only to update this software. For $29, I could virtually buy a new router.

    Two questions:

    1. is there a cheaper way to connect my Macbook Air to the internet with a cable?

    2. can I download updated the firmware of the Netgear via the normal WiFi connection, or he'll just permanently disconnect my laptop on my home WiFi network?

    Thank you for any advice you can give me.

    Two questions:

    1. is there a cheaper way to connect my Macbook Air to the internet with a cable?

    2. can I download updated the firmware of the Netgear via the normal WiFi connection, or he'll just permanently disconnect my laptop on my home WiFi network?

    (1) No, you need to this thunderbolt adapter and an ethernet cable.

    (2) what they give is the perfect Board as ethernet is more reliable than wifi. But I am not agree.  Maybe I have will burn someday, but chances are with me.  99% + chance you can do wireless.  You are offline but can reconnect automatically in most cases and may have to do a manual connect after installs the firmware.

  • love at first sight

    After giving a presentation using my Macbook Air on a video-projector (connected on the thunderbolt with a VGA adapter port), my Macbook no longer recognizes my Apple Thunderbolt to the home screen. If I connect another Macbook to the Thunderbolt display, this combination works perfectly. If I connect my Macbook to a video projector once again, my Mac recognizes normally functions and the projector.

    Tried everything to solve this problem, even reinstalled OSX. Said still configuration information: no device connected to the port Thunderbolt. My local Apple store needs my Mac 14 days for repair, but I'm not convinced that it's a hardware problem.

    Does anyone have an idea? Thanx, Michael

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    Subject of memory NVRAM and PRAM

  • New album of love at first sight, how, or that I even say Lightroom where is the library?

    I have learned, over time, be very Ume with Lightroom and now is no exception...

    I copied all my files, the complete library of photos, more than one new hard drive Thunderbolt. I then deleted and renamed the old firewire drive and now use it for a backup. :

    My question is: when I open Lightroom it acted as if to nothing was and all the pictures are showing. What is Lightroom? It uses the old drive, which is now a backup even if I renamed it? or is 5 Lightroom so smart that he sees the new hit of lightning and the library record and just decided on its own that 'this' is what happens to use?

    I don't know what is happening, but since this is day 1 I want to be sure Lightroom uses the correct library, not the backup.

    Someone can help me to determine that things are in place and working as it should?

    TIA,

    Ken

    I don't know what the "folder tree" in Lightroom, but here is a screenshot of my Lightroom 5 in library mode.

    As you can see, it shows the photos under the column on the left, but not as a "master file" which is how my images are saved. Right click on which does not give me an option to update anything.

    I didn't click on the hidden on (missing) New LaCie 2 TB and click right and choose 'New place' and made a huge mess now because it shows all the photos into a blob and not carefully stored in a structure by year and date. All that is now gone. I have to stop working until I get this resolved.

  • The Application could not if initialize properly (0xc0000142) click on OK to close the application.

    Hi, I have a problem with this application. What happens is, every time I close my my office an error message:-l' app could not if initialize properly (0xc0000142) click on OK to close the application.
    Hope you can help me as soon as possible.
    Thank you.

    Hello Mario,

    To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
    2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the command sfc/scannow. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    Hope this helps you. Let us know anyway. Make it a great day!

    "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

Maybe you are looking for