Low beginning on Satellite M40-145 after changing the 160 GB HARD drive

Similar Questions

• Satellite M40X-112: can I use the 160 GB HARD drive

  I have a Satellite M40X-112 lapptop and I want to upgrade my 80 GB to 160 GB internal drive.
  How is know possible? (Toshiba hotline cannot give me an answer only that a 80 GB drive has been tried with these lapptop!). Anyone have experience with that?

  I read several statements here in the forum about HDD upgrade on the M40X and it seems that there is a limitation in the BIOS.
  The BISO will not recognize the 160 GB HARD drive and that is why you will be not possible to install an OS or you will not be able to boot from this device.

  Please use the "advanced search" from this forum to find discussions on upgrading the HARD drive.

• Qosmio F10 - cannot change the type of HARD drive in the BIOS

  I want to change my hard drive, but the category in the BIOS is not editable.

  I can not change the type of hard drive in the BIOS on my desktop PC.

  Hello

  And you want to change in the BIOS now?
  I put t know which option you mean exactly

  The drive in the BIOS, you can change t. That's why you should buy a new

• Is it possible to change the 500 GB HARD drive with an SSD on my HP Pavilion MS228sc?

  I wonder if it is possible to change the 500 GB HARD drive with an SSD on my HP Pavilion MS228sc?

  If 'yes', I guess I have to go for a SATA SSD if there is. But I have to worry about other specs?

  If 'Yes'... what could be.

  I googled my question but no answers... so I ty Wizzards :-) Forum

  @Lord_Nikon

  In fact, this is not true. As long as he uses a large SSD enough it will be able to use the recovery media. I suggest using a SSD of 256 or 512 GB if budgeted for the upgrade...

  He doesn't have to make a Windows 7 installation USB drive and use the activation key license on the certificate of authenticity from the PC Windows to perform a cleanup to install.

  One of them should be on your PC. The Prodct key is what is needed for installation and activation online.

  

• C55 - A satellite - keep Windows after changing the HARD drive?

  Hello

  I want to buy Toshiba Satellite C55 - A, which is pre-installed Windows 8.1 and the recovery on the HARD drive Partition.
  I also want to buy 256 GB SSD and put it in Toshiba (and use the external as hard drive from Toshiba HARD drive).

  Can I install Windows 8.1 that I bought (preinstalled) on the SSD?
  If so, how?

  Of course, you can swap the HARD drive with an SSD.
  The key is the recovery media (USB key or drive).
  You must create a recovery disk to replace the HARD drive.

  Laptop Toshiba computers are preinstalled with software called Toshiba Recovery Media creator.
  This allows you to create a recovery media that you can use to reinstall the system on the new SSD installed!

• Satellite A210-128: I want to change the 320 GB HARD drive 7200 RPM

  Hallo all

  Can someoane help me with this little problem?
  I have a portable satellite A210-128 with a hard drive of 250 G 4200 RPM (* slowest *)... I want to change the hard drive with a hdd 2.5 "Western Digital 320 G 7200 RPM (* speed *).

  Question:
  1. If I buy a disk sata2 hard can I put on my laptop because my A210-128 has a disk sata hard?

  2 can I I install vista on this new hard drive on my vista dvd, im asking this because I want to be shor that my recovery dvd * RECOGNIZES THE NEW HARD drive * and I can install a new copy of windows or installing dvd can * only works with disk drives hard toshiba *... ???

  Thank you.

  As to the question;

  (1) I think a SATA2 HARD drive would go because the standard SATA2 is compatible to the bottom. But I assume that the system will operate as a good HDD SATA.

  (2) Yes, you can install vista using the Toshiba Recovery DVD. It shouldn't be a problem with a fresh install

  Good bye

• Re-install Windows 7 after changing of notebook's hard drive

  I bought my laptop with Windows 7 pre-installed a few years ago. Recently I started having a message that the hard disk failure is imminent. I bought a replacement hard drive, he cloned and installed in the laptop. All my programs and data is there, but now I get a message saying that Windows is not genuine. I tried in vain to backup the old hard drive and pass messages that suggest the hard or Windows is damaged.

  I understand that the license for Windows, which came with the laptop, allows to change the hard drive, so if I can't restore it to the new hard drive, I can otherwise transfer?

  The common cause for these mismatches is a defective Intel Rapid Storage Tech driver

  Download and install the latest version of...

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=21730

  Then run another MGADiag report and view the results.

• Satellite A55-S106 does not recognize the 160 GB HARD drive

  I replaced the 60 GB IDE HDD in my laptop Toshiba Satellite A55-S106 with a 160 GB one of Western Digital.

  I've restored a Ghost 10 image to the new drive on a hard disk external. The computer still recognizes only 60 GB. Belarc and HD Tune to see a 160 GB drive, but show the volumes as being only 60 GB.

  Disk management Windows show 93,16 GB as unallocated.
  I am running Windows XP SP3.

  Someone at - it ideas? The BIOS can be crippled somehow? I can't find anything in the BIOS that seems to address hard drive size.

  I started directly on the Ghost recovery CD after installing the new drive. Should I have formatted, it firstly somehow? Here I used the original recovery CD to recover everything first and then restored the Ghost image?

  I put a 160 GB drive in an old 1999 Dell desktop running Windows 98 and no problems like that. It is hard to believe that a laptop from 2005 would have this problem. It is, however, my first attempt at using a version of Ghost Windows hard drive recovery.

  > I started directly on the Ghost recovery CD after installing the new drive. Should I have formatted, it firstly somehow?

  Yes, I suppose the HARD drive was not formatted in NTFS file format.
  This is why I would recommend booting from original Toshiba Recovery CD and then check if the HARD drive has been recognized correctly!

  Please check first!

• Satellite P200D died - nothing on the screen, no HARD drive noise

  Hello
  Toshiba P200D-112 (satellite)
  Just 2 years and already 'OUT '.

  When I press the Start button, the power light comes on and will stay on.
  The fans start but stop in a few seconds and nothing more happens.
  Nothing on the screen, no hard noise complete silence.
  If I continue to press the start for a few seconds power button is sharp as usual.

  Looks like a protection stop start to work.

  I changed the CPU for nothing (the only chip that I can change without welding).
  I tried with battery and without the battery.
  I changed the HD.
  I deleted the DVD player.
  Now, I have on the table, just the motherboard and I have always the same thing.

  Do you please an idea on the reason of this phenomenon.
  Thanks Christos

  Hello

  I see you didn't check the RAM modules.
  Usually, it is the first part that should be checked before you disassemble the laptop everything and try to replace the other, new parts like CPU or similar

  But if the replacement of the RAM won't help, so I put t see any other solution proposal to replace the whole motherboard.

  It's a shame because the new motherboard costs a small fortune

• Change the size of hard drive so that on?

  Hello

  I was wondering if you can increase the size of the virtual hard disk while the VM is still on?

  This not is not grayed out so im assuming that you can?

  If so is it draw everything back, I normally power off the virtual machine and then change it.

  Thank you

  Mike

  defrogger,

  Yes, you can stop or restart required. There are no disadvantages, but there are a couple of caveats. Firstly, it should be Windows 2000 Service Pack 4 (you may need the DiskPart.exe of here), or the most recent and the second, it may not be the startup of the operating system disk.

  For example, if your drive D:\, you can use the vClient to change disk virtual hard disk 2 with the new size. Connect to Windows and open a cmd prompt.

  C:\Windows\System32 > diskpart

  DISKPART > list volume

  DISKPART > select volume X (X is the number of the volume with the new capacity)

  DISKPART > extend

  DISKPART > exit

  Check disk management to check the new capacity.

  This article is a step by step video:

  KB1007266

  Jonathan

  Please allow the points if it is useful.

• Satellite P100-354: how many rpm has the 160 GB hard drive

  How many rpm has the 160 GB hard drive?
  And. It is a SATA?

  Hello

  to answer your questions:

  The disc has a speed of 4200 RPM and YES it s a SATA drive.

  Hope I could clear your mind. :)

  See you soon

• DESPERATE HELP! MacPro 2014 suddenly fried (?) after inserting the external USB hard drive, help!

  I plugged a new external HD USB (literally out of the box) to my MacPro and suddenly the display went dark, the music stopped. I waited a few minutes and tried to restart. The chime goes off but display remains dark. I think I've tried everything under the Sun (the PRAM, 5 second long hold of the button reset / stop) but nothing helps.

  I deleted all the cables, left it unplugged for a minute, restarted with nothing except the screen and keyboard. Chime passes then nothing.

  Is it possible that the USB fried the mobo? I had the Mac for a while now and never seen anything like this.

  I have two external displays connected via thunderbolt

  It is the HD, a pregnant optimized SSD INATECK

  http://www.Amazon.co.UK/GP/AW/d/B00FCLG65U/ref=mp_s_a_1_1?QID=1455046541&SR=8-1& pi = SY200_QL40 & keywords = inateck + speaker & DPLS = 1 & dpID = 41LT5jGJ01L & Ref = plSrch & th = 1 & PSC = 1

  http://www.Amazon.fr/DP/B00FCLG65U/ref=pe_386181_40444391_TE_item

  I plugged the USB HD directly aft of the MacPro

• Satellite A100-906: Question on the processor and HARD drive temperature

  Hey guys,.

  I want to ask u for the level of normal temperature of this laptop? I want to know the temperature of the CPU (1,2) and the temperature of the HARD drive, because I think that my laptop is overheating and it is a problem for me :/ (my temperature is now around 50 for the 2 hearts and nearly 40 for hard disk) Is this ok or? Ty ;)

  Hello

  Believe me, the 50 degrees C for the CPU and C 40 degrees for the disk HARD is a normal temperature! It's rare!
  On my laptop the CPU temperature increases up to 60 degrees C if no application works.

  But be aware that the temperature varies.
  If you run different applications on the laptop, the performance of the processor will be increased and the temperature rises.
  That is a fact.

  There is nothing wrong GUY ;)

• I can't recover my system (DV6000) using recovery discs after replacing the card mother/HARD drive

  I have a DV6408nr (windows vista Home premium) I had to replace the motherboard and hard drive. When installing the new motherboard (same part No.: 443775-001) and insert the recovery (bought from HP) discs that I have, I received an error message stating that the PC could not be recovered using my disks. The serial numbers on the label service and in my bios do not match. When I entered the serial number of my bios in HPpartsurfer, he said that the system is a DV6449us. I already checked my RAM and HARD drive is brand new/not formatted. I used these recovery discs (manufacturer: 483905-003/483906-003) successfully before on other flags of DV series. Is there a reason why these discs should not work on two motherboards in the same system with these similar specs? What should I do to get my system recovered?

  The number of the motherboard and other show information in the bios of the new Commission?

  The numbers do not match the recovery disks or information is missing in the bios.

  If it's really a mismatch, then you will need to find the good recovery disks or use a Dell installation disk operating system and use the product key from the sticker on the laptop to get activated, and then manually install the drivers.

  If the bios tattoo is damaged or missing information only a used HP Center can then fix the tattoo.

  check your private messages

• Satellite M40: Question on formatting the HARD drive

  Dear Toshiba

  I have laptop satellite M40 and want to format that my HARD drive is it certain that the software used for Toshiba HDD format

  Help, please

  Hello

  What HARD drive you want to format?
  If you want to format the HARD disk where the operating system works you can do if you are recovering your operating system with the recovery CD. However, you can boot into DOS mode and there you can try to use the format command. Note: You will lose all your files!
  Also if you want to format an external HARD drive or a second partition, please right click on this drive, then format

  You can also use a magic of Partitions if you want to create partitions, change the size or format hard drives.

  Good bye