Low sound Volume for incoming calls?

Similar Questions

• The volume of incoming calls and notifications of Split

  Is it possible to split the notifications and the volume of incoming calls in two options?
  I got a SII and I still managed to keep notifications and incoming calls to another sound level...
  Thank you

  This has been asked before, but on Sony they must together exactly as it is defined by default on Android.

• Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Hello

  It can help to cancel your iPhone in a Bluetooth headset pairing, if it is currently associated with it.

  -On your iPhone, go to: settings > Bluetooth > tap the info "i" beside your headset > tap Forget this device.

• Different unlock the screen for incoming calls?

  This weekend, I noticed that my unlock screen differs for incoming calls. I admit, I was in the cardiac ward at the hospital, but I'm now at home and it's always the same. Instead of throwing away them from side to side, they are upstairs and downstairs. It still works the same, but the layout is different.

  Did you perhaps install an app that does this and you don't know that he had this feature?  I think it's kind of cool.  I want my phone to do.  Thanks for sharing the photos too.

• Bluetooth volume on incoming calls

  Connection bluetooth Xperia XA for car (Sony radio/Microsoft Sync) translates in all incoming calls being inaudible, that the volume is set to minimum. Even turning the full radion volume cannot quite hear the conversation. Bluetooth works fine on other phones (Samsung/romaric/Medion tried without problems). It just seems that the Xperia XA is not quite connect properly.  I imagine that it would also for emergency help function of the car so that automatically calls emergency accident. Then there would be some problems of security here as well. If someone else has overcome this?

  I had contacts to Support Sony, restored the phone and it seems to have solved the problem. Thanks to the support staff of Sony for their immediate attention.

• Unplug the headphones of Walkman app silenced all functions of the phone except for incoming calls

  I found a bug that caused the alarm become silent. I am able to reproduce consistently and ahd a firend with a different Xperia V confirm.

  I use using a Sony build 4.1 version (. 490) with ADWLauncher (but my friend was also able to reproduce this with regular Sony Launcher, also on the 4.1 build)

  to reproduce:

  (1) check base case: all applications closed, adjust the volume to maximum using rocking of the volume on the side of the phone. to release the keys, you should hear a tone giving you the current volume

  It also means that the sound works

  (2) plug in headphones

  (3) open app Walkman and listen to a song

  (4) once the track has begun and you can hear in the headphones, unplug the earphones

  track must stop (correct behavior)

  5) press "Home" to return to the home screen

  (6) repeat step (1)... sound is now DISABLED, autour and shows volume knob slides it is not cut, but when I release the button it does not play the sound

  critical, it also cuts the alarm

  (so if you want that the game alarm for 2 minutes in the future before the departure the sequence above, when it fires it is silent after steps 1 through 6 have been made)

  some things that eliminate the effect once it arrives in this State buggy: If you receive a phone call, then he makes it sound and after the call, his resume (no matter what you did with the call - ignore, answer etc, all that is needed is for the phone to ring)

  also sometimes re - insert and remove the earphones also restores sound

  phone is fully updated from the Google store set to have the latest versinos of applications

  I tested this same sequence using other music apps (of rocket, Google Reader Play Music) and the phone has NOT lost his after step (4) and everythnig functioned normally.

  This bug seems to be isolated to the sony Walkman android app.

  I quite like the walkman for sony hopy app can look at this and fix it with an update of the application itself - as all other music apps I tested are causing not easy

  I do not know if this was presented in a recent version of Walkman or the 4.1 update... Maybe someone could test on a pre-version 4.1 phone to see if it still happens

  the recent firmware 9.1.A.1.140 seems to fix this problem. was not able to reproduce once I have updated.

  Thanks sony!

• Portege R600 - software SIM card which warn for incoming call

  Hi all,

  I just plug my sim card in my laptop, everything works :) but I have a quesiton...

  Is it possible, (when someone call me while my sim card is in the laptop) some software or that never notify me of incoming calls?
  As there is an option to play sounds on my laptop when new cams sms message.

  Thank you.

  Hello

  This software is not known to me and to be honest, I doubt that it s is available on the market, but google a bit... maybe you will be lucky
  I n t could find none :(

  Cheers mate

• Phone have not answer/ignore for incoming calls

  About a week, my phone started to act up by showing not unable to answer or ignore incoming calls. I tried to restart the phone and messing around with setting but nothing. Anyone put an end to this problem?

  Salasavandy wrote:
  I didn't even update to the pacifier.

  In this case try to do it to see if it will help you.

  Go to settings > personalization > manage notifications, press the tab "All".

  Search for InCallUI and check if the box is check.

  Then it should work fine.

• BlackBerry Smartphones for incoming calls caller ID displaying DO NOT name of contacts (phone number only views)

  Whenever I receive an incoming call, the caller ID shows that the phone #, even when I have that number corresponded to a contact.  Since I have not much phone # stored s, I have no idea it's someone I know.  However, the contact name appears in the diary of appeal, but not on the initial display of incoming call.  How can I get caller ID to recognize and display the name of the contact with the phone #? Any help would be greatly appreciated!  (I have the blackberry 8520)

  Thanks, Lauren

  Hello and welcome to the Forums of Support BlackBerry.com.

  It could be one of the three solutions... Try these:

  1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
  Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
  * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
  * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

  3. you probably have "Content Protection" located on your address book.
  Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no

• Setting sound volume for USB speakers

  I have Dell AC511 USB speakers attached to the Mac Mini.  When using these speakers, slices of level default volume using volume up/down on the keyboard go straight from muted way too loud for the rest room in the evening by pressing volume up only once.  Is there a way to make slices when you press volume up/down key on the keyboard be more specific?  Using the mouse to adjust the volume (using volume in the menu bar icon or by using the volume slider in the control panel) offers much more granularity.  I would like to have these more granular increases when you use keyboard volume keys down too.

  I did not take anything under the sound settings in the preferences of each system or in the application Configuration Audio and MIDI.

  Howdy Alex -.

  I understand you want to adjust the volume of your Mac in small increments without having to use the mouse. Fortunately, this can be done in now Option and shift when setting the volume via the volume on your keyboard keys.

  Sincerely

• The phone rings does not for incoming calls! / spa2101 connected to the router

  Hey guys,.

  I had this problem for 2 weeks now, my outgoing calls are fine but with the receipt of custom just phone sounds sometimes. He usually works once I restarted the adapter, then after an hour on the phone used ring when I test it.

  I opened the ports on my router (5060-5061) and the firewall is disabled.

  BTW: I have this software called xlite and when I tried to call for that, it worked fine but the phone did not respond. im guessing theres some configurations that must be accomplished, but what is the question =)

  Thank you for any response

  Hello

  You must change in the line-1/2 tab:

  NAT mapping enable: don't-online Yes

  NAT keep alive enable: don't-online Yes

  Then, you can control the interval keepalive on SIP tab:

  NAT Keep Alive Intvl: (def = 15)

• Adjust the number of rings for incoming calls on Iphone 4S?

  After the recent iOS 9.2 update, my 4S rings only 3 x before I miss the call and he goes to the virtual machine. I wonder if there is a setting for this?

  You will need to contact your carrier and ask if they will do it.  There is nothing that can be controlled from the iPhone.

• Low sound volume

  When I play a DVD, the volume is so low I have to use headphones.  But when I'm on Youtube the volume is fine.

  Hello

  One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers & headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K

• Name of the Contact to blackBerry Smartphones torch does for incoming calls

  I discovered this problem yesterday when my mom called with its Bold 9700. It always shows 'unknown number '. My mommy phone has the same problem too. How would I solve this one? Hope you can help me. Thank you. :-)

  Camus assi,

  It could be one of the four solutions... Try these, (the path to the settings may vary on your torch):

  1. make sure that you set your own code to the Dialer phone screen > Options > smart dialing.
  Set your country Code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
  * In the United States, the value of this country as '+ 1' Code and place your code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
  * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

  3. you probably have "Content Protection" located on your address book.
  Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no
  * If you don't see it here, your device operating system handles this differently. Look at the Options > Security > encryption.

  4. go to Options on your device > Security Options > encryption > include contacts the value 'No '.

• CISCO SPA122 busy for incoming calls

  Hello

  I have a problem with some SPA122.

  They are registered, they can dial a number, but they can't receive calls.

  In our cause to hang up asterisk SoftSwitch are Busy (0) or Failed (20).

  But ATAs are saved.

  I've noticed 2 things:

  • ATA, registered with a private IP address don't have questions while some ata registered with a public IP address have problems. All the ata, with the address private or public IP had the same configuration.
  • In these clients with ata busy (0) we reset the data and we have the same configuration. In this way, they still run.

  Our SoftSwitch Asterisk is MOR by Kolmisoft. They said "it happens when ATA does not respond to requests to qualify. He is redirecting request type. Please check ATA configuration if there is no road or forward together on this. »

  We have reproduced the call and checked the trace of the SIP.

  Something is not ok with ATA itself. It returns the following:

  302 moved temporarily SIP/2.0
  To: <> [email protected] / * /: 5060 >; tag = d299d2248086f464i0
  From: "37052058393" <> [email protected] / * />; tag = as088ffdb4
  Call ID: [email protected]/ * /: 5060
  CSeq: INVITE 102
  Via: SIP/2.0/UDP 192.168.xxx.xxx:5060; branch = z9hG4bK027fee05
  Contact: <> [email protected] / * />
  Diversion: <> [email protected] / * />; reason = unconditional
  Server: Cisco/SPA122-1.1.0(011)
  Content-Length: 0

  He is redirecting request type. Please check ATA configuration if there is no road or forward together on this.

  We use firmware 1.3.5 and attached our config file.

  Please, can you help me with this problem?

   00xxxxxxxxx748

   00xxxxxxxxx621

  All calls are transferred elsewhere as shown in the response to INVITE captured on top of thread. I see neither occupied nor error response sent to SPA122. So, who the BUSY signal / ERROR you mentioned? It seems that it's Asterisk and SPA122 is guilty here...

  Note that the configuration of the joint disclose passwords SNMP to the public, so it's time to change.

  Rate of useful advice. It will help others to find solutions.