Low soundlevel using bluetoothspeaker

Similar Questions

• I do lower 3rds using Photoshop

  I do lower 3rds using Photoshop and After Effects. How to RECORD a 3rd more low so that it will work in Preimere and consequences later?  Is this possible? Can someone help me?

  If your lower thirds are not animated, just circles, then just save as a photoshop file and Any NLE or Compositing app will open their very well. They just need to be the same size as your publication.

  If you plan on the animation of the lower thirds can create a layered Photoshop file and import as a composition in After Effects. Set up the animation, and then rendered using the rendering index and the preset Lossless with Alpha. Import the rendered in your NLE file to add the lower thirds.

  If you are new to AE please start here: basic workflow tries to use After Effects without learning the basics of animation, layering and rendering will be completely frustrating.

• Lower FCPX using third file .psd

  I try to create a lower third to be used for FCPX, using a locked .psd file provided by a customer. I can't make it work - can anyone help me? Thank you.

  WWhat does not work? What you do and what happens when you do that? What do you mean by locked? Password protected?

• Satellite Pro U300: Battery LED indicates low power using Linux

  Hello

  I have Satellite Pro U300 and I'm using Linux.
  I have a problem of opinion on my PC, it does not indicate that the battery is low (without flashing) and lights out.

  What this indicator a software driven or it's a hardware problem on my laptop?

  Another small problem that was Watch not remember brightness for battery mode.

  Thank you

  Hello

  > I notice a problem on my PC, it does not indicate that the battery is low (without flashing) and lights out. What this indicator a software driven or it's a hardware problem on my laptop?
  > Another small problem that was Watch not remember brightness for battery mode.

  Please don't be angry with me, but first I would not talk about problems if you use Linux on the Toshiba laptop. Is that Linux is not supported and that's why some features of laptops may not work properly.

  About the light battery;
  The LEDs are controlled by the BIOS. As you know the laptop was running Vista and so the BIOS support for Vista.
  As I said above, if you use another OS like XP or possibly Linux so some features may not work properly.

• Meter very low frequency using PCI-MIO-16-4

  Hello

  I am trying to use a card PCI-MIO-16-4 with BNC-2090 to CI FREQ. Because the sometimes less than 1 Hz frequency of our leaders, or even no time measurement taken, the vi program always shows "Error-200527" and tells me that the min frequency must be greater than 1,192 Hz. If this card cannot measure very low (even zero) frequency in time measurement taken? If it is possible, how? Could you show me some examples? Thank you very much.

  Damien

  What method of measure do you use to measure your rate?  You are able to assign at least 0 (default) to 2 that would be the rounded version of 1,192.  Alternatively, you can try to use one of the other methods to measure and see if that helps.  All these values can be set with the channel to create VI.

• Satellite A500: Low resolution using Win 7

  Hello

  I have looked around the forum and have found no real solution to my problem so...
  I recently bought a Satellite A500 and did a clean installation of Windows 7 Professional on this subject.

  Apparently, I had to just update to keep the drivers, but being the noob that I am, I have not.
  So now that my resolution is stuck at 1024 x 768 or 800 x 600, neither of which are native.

  I downloaded the drivers 64-bit win7 on the Toshiba site, but apparently, I already have the latest ATI driver installed.
  However, I can't always change the resolution, and my monitor is recognized as generic non - PnP.
  Is it possible to check if I have the display driver?

  And also all the solutions for the display problem would be very grateful. It's the only thing that remains now bothering me on this new laptop.

  Hello

  I assume you are using Win 7 64 bit OS because you selected the display of Win 7 64-bit driver is good?

  What A500-xxx you have exactly?
  The European driver Toshiba page provides three different display drivers for the A500 series. Intel, nVidia and ATI
  Seems three different graphics chips were installed in series A500

  You should first check what graphics chip using your laptop
  Then go to Device Manager and uninstall the display driver.
  Then visit the page of the European driver Toshiba, download the display on the right for the graphics chip driver and install it.

  Then restart the device and check how would go to the laptop.

  Welcome them

• Satellite U400-177 - low connection using Intel Wifi Link 5100

  Hello

  Recently, I have problems with my wifi connection.

  I don't know why, but now the connection is erratic, when my connection was in the recent past 30Mbps is now 1, 10 or 20 I'm talking about 1 feet near the router.

  I have the latest version of the 14.2.0.10 driver and cannot find a solution.

  I think the change of the card with a new one as the Intel® Centrino® Advanced-N 6230.
  Don't you know it is compatible?

  Thanks in advance.

  Hello

  As much as I know there is no information on the compatibility between the Wlan card and laptop computer.
  So you have to test yourself

  But if the BIOS recognizes this Wlan key correctly, then it shouldn't be a problem to use this
  According to the Wlan card specifications, this card allows connectivity to 2.4 GHz to access the old 802. 11 b / g networks and 5 GHz for higher speeds and greater capacity of the network.

  However, I m the U400 laptop owner and my WiFi works correctly.

  But I ve disabled all features for the Wlan that allows using the card with the best performance of energy saving. You can disable this in win 7 power management.

• Satellite A100-19: battery capacity lower when using Vista

  It is my another problem with Vista Ultimate after using XP. Before installing Vista (I mean using XP), my battery capacity is almost 2 hours but after installation of Vista, the capacity fell suddenly. After fully charging, when I plug in the adapter, the battery shows 44 minutes remaining understood fully charged.

  I would also like to add that this 44 minutes is seen in the energy saving mode and brightness is at the minimum level.
  What can be the problem? My battery is dead?

  Do I need a new battery?

  Hello Alain

  read the various PC magazines, last 12 months, I found a lot, but really a lot, articles on Vista and all of the issues using the Vista operating system. All those who wrote all that was unique in one thing: Vista needs much more resources than Windows XP Home edition and you shouldn't be surprised with your discovery.

  Sorry I don't have any other comment. Maybe you should take more time and pick up info on Vista read different magazines PC or simply Googling autour.

• Very low volume using Creative D80 speakers.

  * Original title: Bluetooth in Windows 7

  Bluetooth ongoing problems with a speaker system Creative D80, 64 bit windows 7...

  All traces of the missing 5 months Bluetooth chip. I thought that the chip had failed.

  An update of windows brought a month.

  He quit work for a week.

  An another windows update brought the sound back, but it's at least half of the volume.

  I really need this resolved because my external speaker on the laptop outlet does not work!

  TIA

  Joe

  UPDATE, I got a little bit more volume out of it. I forgot of the mounting volume of apps. : PEI
  It is still not up to the old volume it's marginally acceptable however.

  Hey Joe,

  Thank you for your response.

  You can contact HP support, check the model number and see if there are any drivers.

• T3i does AF in low light DISCOS more (using 550 ex)

  I do disco photography and I've had my t3i for about 2 years now and I use the 550 ex.  Recently, the red light blinks when I try to get a focus in low light using the kit lens.

  I know that red light works because I used it with a trigger and I put the flash on a 7 d and it works very well.  In order to get a update now in the Dim light, I have to use a secondary video light for the camera to focus.  The AF works very well in regular light and dim light - but not in a dark nightclub (but it used to).

  Make sure that your device is set to 'One Shot' AF as support on the flash light does not work if the unit is in "AI Servo" AF.

• using Mail can not see the previews

  Once we have closed the it, we do not seem to raise the window split to display previews of emails from the point in low bar using the classic in OSX 10 11.6 display (or on another Mac 10.11.4)

  You must click and hold on the point and make it to lease Midway to the top of the screen before you let go.

  It goes same for the unconventional view, except that you have to slide right in to the middle of the window.

• Satellite L50 - A - headset volume is too low

  Windows 64-bit of 8.1

  The volume is too low when using a headset. I tried headphones and two different types of headphones on ear, both with no result. Office volume is set to maximum, as is iTunes and VLC.
  I also DTS enabled, which has stimulated a little volume, but it is still too quiet.

  Google search suggested the so-called "Compensation of volume" (playback devices > properties > improvements > Loudness equalization), which seems to be the generally accepted the problem solution, but that has not helped me at all.

  I am a student in music that makes a fair bit of audio processing for the good sound is important to me and it makes me crazy, does anyone have any suggestions?

  Thank you

  Eh, it's really hard to tell what the problem is here. As far as I know there is not much difference in how he works with internal or connected speakers earphones/headphones.

  I have two Toshiba laptops and there is absolutely no any kind of difference. When I change the sound level, it reacts as usual, regardless if headphones are connected or not.
  When you start some application open the volume mixer and check if the noise level is identical with a sound level for the speaker.

• low volume on HP Pavilion dv7-4177nr

  I suddenly lost almost all usable volume on my internal speakers for portable computers.

  I tried to do a right-click on the icon "speaker" and setting the properties of a tick in the volume, but the volume is still too low to use with Skype.

  I checked my audio driver and it is IDT high definition audio codec 6.10.6292.0 22/07/2010

  The driver is installed in C:\windows\system32\drivers\stwrt64.sys

  Is there anything else I should try?

  Hello

  It can be interesting to try a new installation of another driver IDT, then try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49432.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click set default - it may also be useful to check the box for "Loudness equalization" once again.

  Kind regards

  DP - K

• Control the time times of high and low of trains of pulses in C++

  Dear team of support of National Instruments,

  Here's what I have so far:

  I was able to generate the number of pulses (a pulse = a rising edge and front descending one) that the user has indicated via the GUI I created in Visual C++ 2008.

  I use DAQmx 8.6.

  I use the DigitalSingleChanWriter (hopefully, that's what it's called).

  I use for the synchronization of the sample, on request.  I tried to use all other types of calendar but I always get a DAQException run the error that says I can use only OnDemand calendar.

  OK, so here's the problem:

  I have a USB-6008-6009 card connected to an oscilloscope.  I know that the connection is correct, otherwise nothing would appear.  However, if I send say... 6 impulses, the delay between the first rising edge and the first falling edge is dramatically different and then the second and the third.  If I return my samples, I get an assortment of new and totally random times.  So finally, my question is "Is there a way to control the time of a great time and a bit of time?"

  I use a Compaq 2003 lap top, what is worthy of the rubbish heap.  I'm not to blame on this right away as problems that will not solve the problem at hand.  Although I understand if it's actually the problem for random times, but I would still have no way to control the time themselves.

  I hope that I don't have drug it too long, but I decided that distribute information on would be better then just a few tid bits.

  Thank you for support, that you can offer,

  Daniel

  OK, so I just returned from the lab, and this is what I got:

  I was able to control the time at the time of the high and low by using the "WriteSingleSamplePort" of the DigitalSingleChanWriter method.

  I put it in a loop that repeated many times that the user wanted impulses.

  At the beginning of the loop, I used a delay function that I wrote and delayed for a time given and then a pulse with a value of 255 and then delayed again and a pulse with a value of 0. And then restarted the loop.

  In the end, it works.

  Of course, I have another question.  I kept reducing the amount of time between two pulses (1 s, .5s, .2us and so on).  However, once I have diminished the time of secondes.01 or a millisecond, the pulses on the arrested oscilliscope becomes smaller.  It seems that past 1 millisecond Board USB-6008/6009 is unable to deal with the exigencies of the moment.  Or else the computer trash part on that I cannot deal with the exigencies of the moment.  But I believe that the Council is not at fault because it was designed for this exact sort of thing, could you tell me if there is no limitation to the Commission which prevent production of pulses in or within a period of 1 millisecond.  Thank you very much.

  Thanks for all the help,

  Daniel

  P.S. I'll stop you buggin with big messages that I promise you.

  P.P.S.  If someone wants to see my source code for their own project, I'd be more than willing to share.  Please email me or leave a message here.

• use of devices high cRIO 9068 FPGA

  Hello. I have problems with my cRIO 9068 (dual-core, Artix 7 667 MHz), which uses a lot of FPGA resources. I did a little VI FPGA (LabVIEW 2013 SP1) allowing USER FPGA led to two colors (green and orange) for 500ms and then it is off for another 500ms. use of device Watch report 9193 records used(8.6%) and 9744 LUTs (18.3%). I adapted the VI even for a cRIO 9072 (Spartan 3 - 1 M) which have been allotted to me and use of the device is much lower: registers used: 443(2.9%) and read: 644(4.2%) - please see attachments!

  I used the XNET library in the past with the 9068 and 9862 CAN Module: since I knew that these libraries use the FPGA space, I removed XNET 1.8 cRIO software before this test. Before removing, use of FPGAS was even higher!

  Can someone tell me how can I reduce the resources used to 'normal '? Thank you!

  Hi Lucien,.

  The increase in the use of core resources that you see is normal for the family of targets Zync. Try to compile white VI for each (no user written code LabVIEW). You will notice that the Zync platform always uses an important part of the fabric (which targets Zync is used).

  This behavior is due to the very different architecture of the family of chips Zync. As the FPGA and ARM processors are on a shared matrix, a large part of the logic and OR treatment implemented in ASICs Spartan/Virtex advice should be moved on the FPGA itself.

  You should also notice that, although there is an increase in the use of FPGA base fabric, the gross number of LUTs/flip flops at your disposal as a user is much greater on Zync objectives than a Spartan comparable unit.