Low volume PCMCIA - 5100 Satellite control

Similar Questions

• Low volume of C650 Satellite

  I had a Satellite C650 for a few years and the volume was still low on some youtube films.
  I turned in the control panel / its maximum amount, but still having trouble hearing, it is because it is incorrectly registered or failure with my soundcard?

  Any help would be appreciated.

  > the volume was still low on some movies to youtube
  >, it is because it is incorrectly registered or failure with my soundcard?

  I guess that the question of the low volume has nothing to do with your laptop or the sound settings.
  In my opinion, it depends on the movie.

  To check the availability of sound, you have to play some sound CD or DVD of the films that have been recorded professionally.

• Too low volume of the microphone

  I just bought a new Toshiba Satellite L500D, with Windows 7, and I'm having a problem with the microphone volume, in this sound recording is barely audible.

  I followed all the steps suggested on this topic on the forum: http://social.answers.microsoft.com/Forums/en/w7music/thread/06582922-0014-4dac-9f74-b63f143fbb8e... .but nothing fixed it.

  It's a built-in microphone and audio driver is Realtek.  I did a driver update check and it integrates the latest version.  I all set to maximum microphone volume settings and tried to test records Skype and sound recorder for Windows.  They record, but it is extremely low volume, even if I'm leaning closer to the microphone and speak loudly.  Different recipients of Skype call could barely hear me.  The only thing that saves the high voice is when I run a finger over matte plastic of the monitor frame - which saves super hard for some reason any.

  I welcome suggestions as soon as possible.  I need my microphone to get the work done!

  I hope that the people at Microsoft can remedy the situation as soon as possible, because it is crucial to set!

  I had this problem for a few weeks, I recently read a forum post saying uncheck the: allow applications to take exclusive control of the device:

  Well, I found this setting and changed a few others and I think that he has fixed

  I went through the control panel > hardware and sound > manage Audio devices to reach the acoustic Panel.

  I selected reading > Speakers > improvements and made sure that everything was unchecked.
  "" I selected reading > Speakers > advanced and unchecked "allow applications to take exclusive control of this device.

  I went to recording > Microphone > listening and insured 'listen to this device' is unchecked.
  I went to levels and assured the Microphone level was 100% and the boost to + 10 dB
  I'm gone into improvements and assured that everything was unchecked.
  "" I then in Advanced and unchecked "allow applications to take exclusive control of this device.

  And finally I went in the Communications of the acoustic Panel tab, changed "when windows detects communications activity" to "do nothing".

• low volume in the 6s iphone call

  I bought the new iphone 64 GB 6s in the last week and noted that the volume of the earpiece is quite low.i can't hear calls properly.volume is ok with hands-free bluetooth and speaker kit and only has problem with earphone. I checked all the settings but nothing is useful, then please help as I am very bored with the poor performance of the phone.i follows adjustments, but nothing has worked for me

  1. activate the hearig

  2. verified volume options

  3 restart my phone

  4. the latest software is already installed

  If anyone has a solution please share otherwise I think back to the android phone that I expected this question in the iphone.

  Hello aghaffar16,

  Thank you for using communities Support from Apple!

  It is my understanding that you experience low volume from your iPhone using a headset.  It is certainly not expected behavior.

  Looks like you have already made a good troubleshooting.  The next thing I would do is try another headset and see if the results are the same.  As obvious as it may seem, remember that the headphone is plugged all the way to the iPhone.  Don't forget to turn up the volume while you are actually on a call.  When not online, the volume allows you to control the music, alerts and other sounds on the iPhone, but not the volume of calls.

  More information on what to do if trouble hearing a call can be found here:

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone

  See you soon!

• Low volume, all cursors on max

  I have very low volume on the flash video in Firefox 9.0.1. All the volume sliders, including the mixer of Firefox and the video slider, are on the highest setting. They all work, but the maximum volume in Firefox is very low and normal elsewhere.

  Win7 64 bit
  Firefox in version 9.0.1
  Shockwave Flash plugin 11.1.102.55

  Did you also check the volume control for the process of plugin-container?

  Try to erase cookies Flash (LSO) and settings.

  Flash Website storage settings panel:

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html

  Global storage settings panel:

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html

• 15 - ac098tu: low Volume by Mic

  Hello

  I have a huge request concerning the low mic volume by realtek dts sound studio, I can see the mic properties shows low bars when I speak into the microphone through front or through portable computer microphone, but when I uninstall the driver from realtek dts sound studio, it works perfectly with the microphone and have good enough bars to the microphone volume.

  But a little low volume on the speakers for sound.

  When I connect wifi windows 10 it automatically update the sound driver realtek dts, I need help about mic low volume, so teach me how to stop updating the audio driver or get me the solution for a low microphone volume please.

  Thanks and greetings

  Hous

  Hello @LeoManinder,

  Thanks for the quick response!

  I understand that you already exhausted the steps mentioned in the solution I provided in my previous post.  Try the following steps to stop your system to automatically update the Audio driver:

  1. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  2. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  • In Control Panel, select administrative tools, and open Services.
  • Go to Windows Update and double-click it to view its properties.
  • Click on stop to stop the service to run.
  • Change the Startup Type to manual, and then click OK.
  3. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide for the Audio from Realtek driver updates.  (This will block your system to automatically reinstall or showing updates the driver).
  4. Change back the setting of Windows Update Services to manual automatic (delayed start).
  5. Restart your computer.

  Source: Re: how to solve the problems of Post-Windows 10 upgrade on HP laptops

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• LifeChat LX-3000 low Volume at startup, requires a reboot

  I bought the LifeChat LX-3000 2 weeks, and it worked fine until 2 days ago. Initially, the volume started fluctuating. I restarted the computer, that fixed it. Then the helmet itself set to a very low volume of base, so when the volume control on the PC is in full I can barely hear. To resolve this problem, I had to uninstall the software and the headset to the Device Manager, restart the computer and reinstall. This again once solved the problem. However, the volume is now very low again. I don't want to have to keep restarting just to use the earpiece. Any ideas?

  Well, everything seems to work fine now. I think that's not as when I start the computer with the headphones plugged, but thanks for the help, she will keep noted if he plays again up.

• Low volume compared to my original Video Clip

  I just got my new 8 GB Clip more this week after using my original 2 GB Clip for 2 years and love it. Unfortunately, I noticed that the volume of the Clip Plus is a little lower than my video. I have done all the stuff with the control panel and the region (tried in North America and rest of the world, put the volume on 'High' setting) but is still not as strong as my old Clip. And forget the 'Normal' setting, it's just laughable how low that is. But if anyone has noticed this difference in volume between the old Clip and the Clip Plus? Is there a way to make it as strong as the old Clip most Clip? Thank you.

  IIRC the volume reduction was changed in an update firmware for the Clip V1. If I play my V1 Clip with firmware.18 50% in volume, it is about equal to my V1 Clip with firmware.35 to 75% of the volume. The volume of 100% full power even sounds good. I think that the scale has been changed for lower volume at least for sensitive IEMs who played too strong with smaller settings. I also believe that the balance of volume Clip + is equal or very close to the version of the software to scale in the Clip V1 and V2.

• The Bluetooth media suddenly got very low volume

  I was happily listening to Pandora via bluetooth for months, when all of a sudden about two weeks ago, the volume got so low I can barely hear it.  I checked the media volume control and it is bent full.  Bluetooth phone call volume still works fine and is generally of fort to operate in full.  I tried deleting and reinstalling Pandora, but no help.  I also tried another internet radio app (Slacker), but he also plays very low volume.  The only changes that I know are updates frequent free app I install I'm warned.

  Does anyone else have a problem like this?  Should I try a hard reset?

  Thank you

  Galán (Droid, 2.1 - update1)

  I did and I had to wipe my phone bluetooth devices and reboot then re add devices.  This took care of it.

• Getting low volume

  Original title: still too weak volum

  When all that can be rotated upward and the volume is still too low... anyone know what MS is going to solve this problem? Seems to be a big problem and as many bugs online by users, most of which is diving in install something else or do something the old way via old drivers.   Have they not still used us as guinea pigs enough a long time to get the information they need to solve this problem? I waited until today to upgrade and wish I would have waited longer and not fell victim to their... Get it now free or paid ads later.

  Using headphones with Win8 was comfortable around 12-14... It's comparable to about 4-5 level on Win8 with Win10 to 100. Without headphones, the level is about 2 - 3, which is crazy and unacceptable.  Where is the best place to report?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, you are facing problem with low volume on your system.

  I would be grateful if you can provide us with the following information to help us better understand the issue:

  • Did you the latest changes on your system prior to this problem?
  • This problem occurs when you use headphones?

  I suggest to follow the methods below and check if that helps.

  Method 1:

  Check volume settings. Follow these steps:

  a. right click on the speaker icon in the taskbar, then select volume control options.

  b. put a check mark on "all devices evolving sound.

  c. make sure you have "Default uncontrolled communication device".

  d. place a check on the speakers.

  If the problem persists, try Method 2,

  Method 2: Troubleshooting Audio run:

  It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  Open the troubleshooting of Audio playback and check if the problem occurs:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  If the question did not resolve, try Method 3,

  Method 3: Please refer to the article below and check if that helps

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  If the problem remains try Method 4,

  Method 4:

  Uninstall and reinstall the audio drivers completely as follows:

  a. click Start, type Device Manager in the Start Search box and press ENTER.

  b. click continue. The Device Manager dialog box appears.

  c. If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  d. in r management device, right click on audio and its driver and click on uninstall.

  e. restart your computer and Windows 7 will reinstall the audio drivers automatically.

  You can also go to the website of the manufacturer and try to install the latest available audio drivers and check if that helps.

  Hope this helps, if you need help on Windows let us know we will be happy to help you.

• BlackBerry Z10 more low volume low enough

  Has anyone else noticed that the the lower volume for listening to music with headphones is not low enough?  I want the possibility of lowering one or two steps more silent, but it does go OFF from the level low.

  I was hoping that the main volume control was a master, but it seems to be the exact same as the command buttons on the side.  The main volume is back completely to the left (less a step).  I don't have any headphones with their own volume setting thus at the mercy of the BB controls (whether on the coast or on the screen).

  Y at - it any other ideas?

  tracee3 wrote:

  Yes, I have this option value.  Still not bring enough calm music as music makes earache when it is too strong, I quickly got it to FF :-/

  I tested mine with 3 different tips, one that came with the phone. Multimedia of BB (a separate volume controls) and a standard game without a microphone. All satisfactory work with music for relaxation (5 points) mid-term.

  If the next update to OS 10.3 does not fix the problem then send in repairs.

• Portege M750 - Volume knob does not control the sound

  Hello:

  Just made a new intall of Windows 7 (32 bit). Made from scracth with CD from Toshiba. The drivers that I downloaded from the site Web of Toshiba. Everything is ok, except the volume knob does not control the sound.

  Does anyone know driver I'm missing? All buttons and other functions are active except volume wheel.

  Hello

  Have you installed the VAP (value added package) for Win 7?
  EU from Toshiba are page pilot VAP v 1.2.40

• Indicator of volume on a Satellite Pro U300

  Hi all

  East-indicator of volume on a satellite pro U300 exist? And if so which tool/applet/driver installs?

  Thanks in advance.
  George

  Hmm, your post is a little confusing.
  As far as I know the Satellite Pro U300 unit was equipped with the sound volume controller, and this can be found on the left side near the headphone and microphone Sockets.

  You need only an audio driver for the sound card woking... that's all

  Good bye

• low volume on iphone call 6

  Dear Sir

  I own my iPhone 6 last year and she has completed the warranty

  While.on is am.adjust too low volume level and also on request your Apple supports.

  What to do please help me

  Hi, this may help.

  Increase the volume

  While you are online, the volume with the volume buttons. Make sure that you see the on-screen volume indicator when you press the volume buttons.

  Check the connections

  If your iPhone is connected to a headset, you will not be able to hear through the receiver using speaker or the iPhone. Follow these steps, after each.

  1. Make sure you have nothing plugged into the headphone jack or the dock connector.
  2. Go to settings > Bluetooth and turn Bluetooth off.

  Turn off the receiver

  The receiver of the iPhone will not work properly if it is blocked or dirty. Follow these steps, after each:

  • Make sure that nothing is blocking the receiver, such as a case or a movie.
    If you have a new iPhone, remove the plastic on the front and the rear of the unit.
  • Check the receiver opening to see if it is blocked or dirty. If necessary, clean the receiver opening with a clean brush, dry, soft.
  • While you're online, turn on the speaker. If you still do not hear, then your network or the reception might be the issue. Try calling again later or somewhere else.

  

  Check the receiver

  Follow these steps to see if the problem is with your receiver or your network:

  1. Open the dictaphone application and record an audio clip.
  2. Type in the upper right corner of your screen to switch playback between the speaker and the receiver.
  3. Press on to play the voice memo by the receiver on your device.
  4. If you hear the voice memo and it seems normal (without distortion, crackling or static), there might be a problem with your network or carrier voicemail system. If you still hear no sound good or bad quality, contact The Apple support.

  

  Update and reboot

  1. Restart your iPhone and the test again.
  2. If there is still no good or bad sound quality, update to the latest version of iOS.

  http://support.Apple.com/kb/TS1630

• Tecra A3 has very low volume

  Hi all, I bought a used Tecra A3. With Win XP Professional, service pack 3. I have not all records with him.
  It was working well before a week or two ago. It has very low volume, I have all levels of volume and the maximum wave. The manual volume knob on the front has no effect, it used to work
  I think the problem started when I downloaded youtube FLV files, then I downloaded a program ('super' was the name of the program) to convert the FLV files into AVI files.
  I uninstalled the program of conversion, I failed to convert anything. I've uninstalled and reinstalled the driver of sound card - card his Realtech AC97. I uninstalled and reinstalled WMP11. None of this has helped.

  On this view, I saw how to do a system restore. I thought to perform the system recovery can solve the problem.
  My question is, if I perform the system recovery, to the GET to the elimination of the parameters of the box, it will clear the WIN XP operating system?

  Thanks for any assistance received, Darren.

  Hello Darren

  Please do not be angry on me, but make you it so complicated. Let's be clear on this:

  Saved on DVD of recovery recovery image contains the operating system, all necessary drivers, Toshiba tools and utilities and some additional applications such as a DVD player. So if you want to install the OS by using Toshiba recovery media will be deleted all content saved on the HDD, formatted partitions and lately OS will be installed. When all is finished you will have clean operating system preinstalled. It will be the same State as the first day after the default purchase.

  Then I don't understand what you mean now with the restore process. During the installation of recovery is complete you must not install or configure anything. Just boot OS, install your favorite software, install the Microsoft updates and be happy.

  If you have any other questions please post again, but please if you ask something to be clear and precise.