Lower the Input Lag on sony C series

It seems that some people have managed to bring down the Android TV input lag to about 16 ms by going into options of developer and changing optimization best resolution to best framerate HDMI. Is there anyone with a counter which can check if it works or not?

I know what you mean. The person who did it the test used an lcd instead of a CRT monitor to achieve their number; but because the LCD have also input lag, the only way to 16ms the TV is slower than this monitor lcd, 16 ms the real number is twice that amount, about 39ms for the x 850.

Tags: Sony TV

Similar Questions

  • P2815Q input lag

    Just got my p2815Q (3840 x 2160) and noting the input lag is horrible. I understand that it is a 30 Hz monitor, which I guess just meant the refresh rate is 30 frames per second. I'm a programmer and my job requires a lot of movements of the mouse, clicking on various things, etc and there is somewhat noticeable 'catch up' that made the mouse every time that I move it anywhere on the screen. I set DPI scale to 150, all text is crystal clear and is very beautiful, but the input lag makes this monitor feel unusable. Is it a sort of configuration problem or someone else noticed this as well? Another note, even if I change monitor 1920 x 1080, I always have the same input lag, even at 60 Hz. Even as I type this, there is a slightly perceptible lag between when the button is pressed and the text appears in the box.

    (1) test the wired USB mouse on all three low P2815Q downstream USB ports
    (2) to test the wired USB mouse on the back of P2815Q USB downstream port
    (3) test the USB mouse cable into a USB port directly on the computer
    View your results

  • -Data 200141 was replaced before it can be read by the system. Mechanism of data transfer is interrupted, try to use DMA or USB in bulk. Otherwise, divide the input signal before taking the action.

    Hello

    Installation program:

    2 x PCI-6602

    Configuration:

    Sampling the five PWM signals of 50 kHz using five counters (2 on a map) and three on another for about 10-15 seconds by recording continuously.

    All meter tasks are configured for DMA transfer.

    Problem:

    I get 200141 errors from time to time.

    Question:

    I tried to increase the size of buffer and all tasks of meter are set to DMA. In the error message the last suggestion is to "divide the input signal before taking the action. I don't understand this suggestion. What is meant by "split the signal before taking the action?

    I am open to other solutions to the problem.

    /Mola

    Yes, I know that the 2 MB/s sound do not like much, but it's a way of high load very low tolerance to try to get 2 MB/s.  You have 5 DMA controllers to negotiate access to the bus and each transmits only 1 or 2 samples of 32-bit whenever he gets access.

    I've seen published baseline data where the maximum sustained rate was< 1="" million/sec="" (don't="" recall="" if="" it="" was="" mbytes="" or="" msamples). ="" as="" i="" recall,="" finite="" acquisition="" mode="" allowed="" higher="" rates="" for="" shorter="">

    Ah yes, here is a link that leads to the other links.  See the section on "The counter of the FIFO" in the first message.  Do you see a * very * significant difference in the performance of the M series for the series X-series.  Here are data for counters of the E series.  (It is fair to note that the comparative analysis was conducted with a much older PC hardware).  For the 6602 counter chip was designed between E- and M-series series, so you can probably expect performance in-between.

    Also note that the benchmarks seem to have been done with a task of window unique tent of owning all the bandwidth PCI as possible.  Since you would have 5 tasks they negotiate access, you lose definitely even more overhead.  In addition, for fair comparisons, your 50 kHz PWM would act as a measure of 100 kHz since you have 2 semiperiods to DAB per cycle of 50 kHz.

    Now that I've seen benchmarks once again, I am convinced that it is a no-go for you with just the 6602.  The good news is that the series X-series seem able to yet more ridiculously than I remembered.

    -Kevin P

  • changes in output when the input is constant

    Hello

    I'm probably being a jerk, but until someone can show me how then I'm a bit confused.

    I have a loop iteration in a VI. The entries to the loop are commands of the Panel before, but even when the input values do not change, the output only.

    It's good to start with (illustrated exit on stays of XY graph top of page even), but after the integration stage, the output displayed on the graph of the low XY continues to increase indefinitely.

    The offset increases whenever the While loop runs (you can increase the time of scanning or the sampling frequency to see when it is run).

    If someone could point me in the right direction, I would be very grateful.

    Thank you

    Ian Haigh

    (running LV 2010)

    I understood what was the real problem: you need to re initialize the integral when the values back to zero. See below:

  • Chaning the input to a counter Terminal?

    Hello

    I'm trying to use the DAQmxSetCICountEdgesTerm function to change two of the input terminals of the meter to something with a BNC connector on my connection block.  One I could just change it to PFI0 but for the second, I'm out of ideas.  Is it possible that I have use one of the analog input BNC terminals?  If so, what are the names of C++ for them?  I note also that on the block, there are two BNC connectors of "user-defined signals", how do you use?

    I both connector BNC-2120 blocks and uses a X Series DAQ card.

    Thanks in advance for any response

    HT

    By reading the BNC-2120 manual again, it specifies how to use user-defined signals.

    Sorry for wasting all of the time.

    HT

  • Input HDMI to Sony Brevia KDL - V40XBR1 TV menu

    I have a Roku streaming stick plugged into the HDMI port on the back of my Sony Brevia KDL-V40XBR1 TV.

    However, I can't find the input channel appropriate when I scroll the entry options.  How do the correct entry?

    Hi richardjroberts!

    You must press the TV/VIDEO button on your remote control Sony provided several times and then select input VIDEO 6 that corresponds to the entry for the HDMI connection on your Sony KDLV40XBR1 TV.

    If the VIDEO input 6 is ignored, you must press the WEGA GATE, go to SETTINGS, and then select the LABEL VIDEO INPUTS. Under VIDEO LABEL ENTRIES, select VIDEO 6 and turn it on.

    If my post answered your question, please mark it as "accept as a Solution.

  • Auto micro adjusts the input level

    Hi all

    I tried this several times and never seem to be able to find an answer that works...  When I talk in my microphone on my macbook pro, it adjusts permanently the input levels, so in mid-sentence volume varies (always at peak).  It is extremely annoying, and there seems no obvious way to a certain volume of recording.  Any help here?

    Thank you!

    Hi Aprilstern,

    I understand that the input of your Mac's built-in microphone volume seems to be fluctuating when you save. In this case, if you use Mac OS X Yosemite or earlier, you may want to turn off noise reduction in system preferences > Sound > entry.

    OS X Yosemite: adjust the settings of your computer's audio input

    Kind regards.

  • Change the input source

    I can't use Ctrl + space to switch the input source, why?

    because the command is CTRL + space.

  • Firefox freeze every time that tired to change the input language

    Hello. Whenever I tried to change the input language to enter in other languages Firefox freeze (program does not).

    Sometimes I type alt + shift or when I click on the language bar to select other languages.

    It also happens with several languages (I've tested, maybe all), and I have tried various software/entry mode, including default windows, all freeze. Reset Firefox under help does not work either.

    This problem occurs with Firefox and Chrome but not IE... Maybe not Firefox problem as this case w Chrome, but and ideas please? Thank you.

    J

    Edit:

    • Regedit could be changed, but do not hit internet setting.
    • I can enter foreign language as long as I set the default language and don't change another language in the language bar. Currently I use the foreign language as default capture software and switch to English of entry in this software.

    Have you attempted to assign a specific shortcut (for example, Shift + Ctrl + 1-9, 0) to select each language?

  • How to hide or remove Directv on XBR-49X830C in the input menu?

    How to hide or remove Directv on XBR-49X830C in the input menu?

    Is there a way?


  • Load to the helmets on Macbook pro through the interface audio usb external keyboard outputs to the inputs 3-4

    I'm trying to understand why there is a load on the output on headphones output Macbook Pro external keyboard outputs 1-2 going on 3-4 the corresponding inputs of the audio interface.  I am interested to know if anyone has something similar.

    Default logic on your stereo Out as the default output of your tracks. The inputs of your tracks have nothing to do with it. If the third line above the control Out stereo says Pan, you can click on it and change it. I hope this helps.

  • How to find or change the voltage setting set in a series of HP TouchSmart IQ500

    How do I find or change the voltage setting set in a series of HP TouchSmart IQ500 (specifically an IQ524)

    It does not use an external power adapter? If so, all you need to use in another country is an adpater sheet to match the wall outlet.

  • My iCloud and shared calendars has stopped working in MS Outlook today.  They worked yesterday.  Now, I get the error message "cannot open this series of records.  The information store cannot be opened?  I tried the fix standard support.

    My iCloud and shared calendars has stopped working in MS Outlook today.  They worked yesterday.  Now, I get the error message "cannot open this series of records.  The information store cannot be opened?  I tried the fix standard support.

    Same thing here.  Looks like Windows did an automatic update during the night, and now nothing iCloud associated work (calendars, contacts, etc.)

    I also noticed that the error message: "could not load file or Assembly ' MOM." Implementation ' or one of its dependencies.  The system cannot find the specified file. "It started after restarting the Windows Update as well.  I imagine that the two are related in the same problem to iCloud.

  • How to lower the volume of the ringtone to start?

    Hello... How to lower the volume of the chime start? I can't seem to find out where to do or to go through the external speakers. I only power a market twice a week or more, and when I do it's really sooner or later really and I of the wake up everyone in the House when I

    Thank you

    To be honest, not sure you can.  To be honest, the only things I can think to do for you is to lower or turn off the sound.

    Also, see the links "more like this" at the bottom left of this page for possible solutions.

    EDIT:  In case you see more Like This:

    More like this

  • Individual access to the inputs and outputs on a single port (PXI-6509

    Hello

    I use PXI-6509 and this sentence taken from the Manual:

    "You can use each of the DIO lines as the input to a digital static (DI) or digital output (DO) line"

    leads me to believe that each individual DIO can be defined as input or output (even within ports), but picture:

    shows that these ports can be defined as inputs and outputs in the same port.

    On another card 6284 with DIO, I can put them individually.

    Can someone confirm that the 6509 is correctly?

    Best regards

    Adrian


Maybe you are looking for