LR license activation - deactivation

Similar Questions

• Activation deactivation iCloud, photo sharing

  On my iPhone I have iCloud library & My Photo off steam but iCloud Photo Sharing turned on.  To be honest, I don't know how iCloud Photo Sharing turned on - I do not use it.  I would like to disable now iCloud, photo sharing and return to the way it was with my own storage original iPhone.  When I go to disable the button from iCloud on my iPhone photo sharing it says that it will remove pictures of Commons of my camera (which is now all the photos I have on my iPhone).  My question is, is this really the case? Can't I just go back to the way (I think) is on the device before icloud, photo sharing has been enabled?

  It must just be better worded. It references only the shared albums as separate from your actual film association. It removes nothing of your camera by activating / deactivating it turned off.

• Microsoft Volume Licensing Activation Center Automated Dialer India activation system is broken, how do I activate my Windows again?

  My Windows 7 Home Premium desktop motherboard no longer works and I replaced it with a new one.

  After that, I see a prompt to activate windows again. I tried to enter the windows product key, but it returns an error 0xC004008 (the activation server determined that the specified product key cannot be used).

  Then I tried calling Microsoft India automated Dialer numbers (http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx), he automated system after taking the 54 figure fails installation ID and responds "Sorry there is a technical problem with the system, please try again later.

  I also tried to contact the management of MS tech support, they work only Monday-Friday (9-6), this is ridiculous, given that everyone has a call 24 / 7 Center these days. This installation is on my home PC and I can't be available on weekdays, in their working time limited to talk to a tech support Executive.

  Microsoft India, please check your systems, Automated Dialer activation for your Volume License Activation Center system is down and you have a customer support 24 / 7! It is disappointing the customer point of view.

  Please help me to reactivate my windows before the expiration of 30 days. Kind regards
  Prashant

  You will need to use the Activation of the operator in any case after replacing the motherboard.

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• EBS R12.2: How to check which modules are license activated?

  Hi all

  I want to know which modules are licensed activated in on ebs.

  I got to:

  -Navigation:
  the responsibility of "system administrator" > License Manager

  
  

  By I don't see here License Manager

  

  
  

  Help, please...

  
  

  Thank you

  MK
  

  Hello

  Please see:

  

  Thnaks,

  A H E E R X

• Activating/Deactivating the sound (Cap 9)?

  Hello

  I know sound can be turned off once in the settings, but I would like an advanced version of action/javascript for it.

  For the moment, I have a square, which is located below a tick, and I love it when the tick is pressed, it hides (I already do) and disables clicks. Then, when you click on the empty box, tick watch once again (I already do) and turns the nattering turn it back on.

  http://i.imgur.com/jkdvvzW.PNG

  If you know all the methods that allow me to do this several times in the project with only these two objects, please teach me.

  Thank you in advance.

  You can only cut all sound equity advances/shared, not just clicks. Muting happens by activating / deactivating the system variable cpCmndMute, which is a Boolean value.

  I blogged about common actions for toggle buttons: 1 share = 5 buttons toggle - Captivate blog

  You can use this action and add the command to hide/show the tick. I don't know how you realize right now: hide/show or States?

• where can I find a list of the licenses activated with my email?

  I have been using my email address to activate many Acrobat 12 facilities as part of my business and my other clients. Is it possible in the site to find a list of the licenses activated with my email address? Even better if he told me the host name of the appliance. I find through other means, but if I can do it over here, it would be much faster.

  https://Accounts.adobe.com/ , then click on Plans & products top

• License activation

  Hello

  I'm french, I have a problem, I want to work with my new subscription on indesign, but my license activation does not work because it is not yet activated, I have a job to go and I can't work, then I pay!

  Please help me!

  Please see I sent a private message

• Entering the serials / Activation /Deactivation

  I'm installing CS3 Design Premium on a new machine. It is already installed on another machine...  My daughter of Marketing cannot be down, while I do this.

  Is there a grace period in order to install on the new machine and make sure that it works correctly before disabling the old machine?

  If you install as a trial then you can verify that it works correctly for a period of 30 days before you do business with the activations/deactivations.

  Download the demo version of the software by means of the page linked below, then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• I want to Exchange my hard drive of my iMac for one SSD. Existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

  Oh, I of course put the whole issue in the reference line.

  I'll repeat it here.

  I want to Exchange my hard drive of my iMac for one SSD. The existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

  Thanks, Thomas

  Transfer facilities of Adobe does not normally operate.  You must reinstall using installation files.  At a minimum you must disable, but you may find that you need to uninstall and reinstall.

• Activation/deactivation

  I have two desktops and two laptops. I will install CC on two desktop computers for now, but when we travel I need to disable desktop computers and turn on laptop computers. I have installed PS CC and expected to find a "disable" in the Help menu entry, but it is not a (although I searched and found another discussion that indicates that there is). It then occurred to me that it was more logical that you would like to toggle through the App Manager, but I see no way to do it.

  How to handle this? There will be moments where I want in any combination of two of the four active both machines. I saw advice installation on a third computer would automatically turn off the first two, but that seems not only gross, that it would not help me at all if I wanted to only one of the two first disabled.

  Thank you.

  Aikane, you will find information on how to log activation, deactivation. Sign in, sign out | Adobe products - http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

• Activating/Deactivating licenses

  Hello

  I'm about to buy Adobe CC suite, but I have a question about the installation on several computers.

  I understand that I can install the software on 2 different computers, but I really need a third additional computer. The third computer is a laptop that I use on travel, vacation, etc.

  Can I buy the standard license, install the software on 2 computers and UN-activate one of the computers easy to use programs on the third computer during this time? Can I do it with ease, for example by just turn off a computer on the internet and activate the software on the portable computer?

  With sincere friendships.

  -Johan.

  Yes, it's very easy to do.

  in fact, you have even to do not forget to turn it off before leaving on vacation.  When you start an adobe application on your laptop travel you will be prompted to connect.  the application detects that you're already connected on your two home computers and will give you the option to disconnect these two, so you can connect using your trip computer.  It couldn't be easier, and has never failed me.  (and on several occasions, I can't seem to do not forget to disconnect from my desktop computer when I leave on vacation and open my laptop at the airport).

• Activating/Deactivating license question

  Hello

  I have Windows XP with Production premium installed. I have also a laptop with Windows 7 RC, with Production Premium parts (programs I use the most) installed on it also. I did it to test the production premium Windows 7 as my use of the secondary computer (single user) license.

  However, Windows 7 will be finally disabled on my computer laptop early next year by Microsoft, so my question is, if I say premium production to turn off on my laptop, will this affect my primary instalation on my XP PC? I plan to get 7 for my PC as a full-use OS entirely replace XP when it comes out, but disable the product then and reactivation after that 7 instalation should work properly, Yes?

  Yes. By disabling a facility will not affect the other installation.

• Adobe Creative Suite CS3 Installation Activation/deactivation

  Our school district has purchased a site license for Adobe Creative Suite CS3. However, as we know, computers spoil our deactivation was not possible. How can I fix the software asks for us to disable a dead computer so that we can install it on a new computer?

  LachelleBryan I'm sorry you are facing difficulties to install Creative Suite 3.  I saw the serial number you provided in the case where 0218971788 and serial number is a serial number of volume for Creative Suite 3.3 Web Premium for Windows license.

  As serial number is a serial number of volume license there are no activation installed or limit activation to reach.  You will need to use the volume license installation files or you will receive an invalid serial number message.

  You can download the installation of license volume of https://licensing.adobe.com/files.  You will need access to the site with an account that was previously provided access to downloads.

• TCS4 + CS5.5 + * 3 * machines + Activation/deactivation - Question Jumble

  I apologize in advance if this sounds complicated - I * tried * to make sure that I say only what needs to be said :-) Any help would be appreciated. [Note: I * is * trying to 'chat' with a representative, but haven't even through the deactivation question until they're stuck in the limbo of scripted answer.]

  On the #1 computer, I had already installed TCS2.5 and CS5.5 (Standard Design). So I have Acrobat X Pro (among many other applications, including Acrobat 9 Pro Extended) available.

  Recently, I installed TCS4 on machine #1 (including Acrobat Pro XI), but Acrobat X Pro and Acrobat 9 Pro are no longer available (error message: action is only valid for products that are currently installed).

  I also installed TCS4 on machine #2.

  Now, I need to use TCS4 on machine #3 (and the machine #2). I can live without it on the computer #1 for now, but I would like to be able to use it later.

  Then...

  • I need to disable TCS4 on machine #1 and activate it on the #3 machine. According to a page using adobe, I should be able to do so * without * remove the machine software #1.
    Question: Is that correct?
    Question: Is there a time limit in which I have to reactivate or I'm good at any time?
    Question: Is there a limit to how many times I can disable and reactivate the software and/or a minimum period between deactivation and reactivation?
  • When I disable TCS4 on machine #1, I no longer have available Acrobat.
    Question: I * reinstall * Acrobat 9 Pro (from the installation TCS2.5) or Acrobat X Pro (from installing CS5.5)?
    Question: Will install this older version of Acrobat interferes with the XI Acrobat Pro that is already installed (which I want to be able to use again later)?

  In a Word, I'm doing this because I need to keep the information confidential client on machines #2 and #3 (can't share information on the same machine). They are the main customers for the TCS software. But I also have to use the TCS software, on occasion, for other customers using the #1 machine (even once, cannot share information about ordinary machines). Then... I need to be able to disable the software on a machine and turn it back on on the other. (As you can tell, the issue of the Acrobat version (and other adobe software) applies to each machine - I want to be able to keep two machines running the current software, but the third execution of which my copy under additional license of Acrobat.)

  Thank you all :-)

  Installation and activation are separate and completely independent actions.

  You may have installed software from Adobe which is off - it of still there but does not work.

  Don't tie you in knots - the best thing to do would be to contact Adobe customer service and have given them the counties of activation for all your product to zero serial numbers.  Then, you can re-enable them exactly on the systems you want (just start programs do).

  For more details, see:

  How to move Adobe software between computers, or from PC to Mac

  I hope this helps!

• Need a help of activating/deactivating the dual-boot...

  Having learned that with ADOBE, there is always a nightmare scenario, I stop in my tracks until you get more information.

  As mentioned in another post, I created a dual-boot for installation - WinXP-64-bit and Win7-64 bit - so I can possibly migrate to Win7.

  I installed (off-trial) Production Premium CS4 in the Win7 partition without any problems. Open PrPro and exported using still and my codec preferred. So far so good.

  As expected, I got the message "Excuse the interruption" telling me that there are already two copies with the same serial number-I have one on my laptop and the other is, of course, in the partition of Win XP on the same computer and HDD as this new facility.

  I chose the "30 days to solve the problem" option.

  It was then that I was able to migrate my preferences, keyboard & other presets for Win7 install and confirm their proper functioning before activation.

  PITA #1-XP, presets, prefs, etc., can be found in "c:\Documents and Pro\4.0\ Data\Adobe\Premiere Data."

  In Win7, they are located in "c:\Users\username\AppData\Roaming\Adobe\Premiere Pro\4.0\.» It is a hidden folder, so you must go to the Options\View folder and check "Show hidden folders". I think that it is now in control Panel\Settings (I got by a help link so I don't know, but it is not in the 'Tools' folder headers).

  PITA #2 - after copying my PrPro presets, keyboard, Pref settings, etc., to the above address, I tried to open PrPro in Win7 to confirm everything. It was about an hour after my previous session. But now I no longer get the option "30 days"! Only "activate" 'buy a license' or 'Quit '!

  PITA #3 - since I do not know how the deactivation and Activation work, I'm not about to go further. Given that the two copies are on the same physical computer and the hard drive, they obviously cannot be made online at the same time. I fear that whatever happens to end Adobe that will not see Disabling or will not properly activate the new installation and then I'll be left with nothing operational. If they cannot keep track of the start date of the new facility and wiped out the trial of 30 days in an hour, I don't have a lot of confidence that the activation process will go so well. I think that there are a limited number of activations as well, and I don't know what this applies to the or how it works. I can see a scenario where I have to re - activate Win XP partition to try to find something and then get stuck there because I've used up my activations and can't reactivate the Win7 partition.

  Anyone has any ideas on this...?

  TIA,

  Hi fuaho,

  According to my experience, disable via the About menu was fairly reliable, and you get immediate confirmation that it happened. In the past, in CS2 era, if you had more than 2 versions of the license that were still open, you could call Adobe and explain to them and they would activate it manually again. I had people logic, understanding when I called. Another time, I had a hard drive accident and failed to disable.

  You can try to call them and talk about them on the phone, because it's a matter of series/license. Just a thought.

  Russ