LSASS. I/O high constant EXE

LSASS. EXE which is in 3 readings and 3 entries per second. According to the various threads on the internet, this question has to happen in recent years but without solution. I saw him currently on my PC at home and a friends laptop but not my work laptop. All 3 are standard Windows XP SP3 + updates. AV, is different from all 3. I think it's time that an answer has been found to this problem. Any ideas?

Ok thank you. I did it

Tags: Windows

Similar Questions

  • Use of the high - standby.exe and imageres.dll

    Hello

    I recently had problems with my laptop 64 bit Windows 7 is slow due to the use of 100% hard drive. By looking at the resource monitor I see that the Standby.exe image access frequently imageres.dll reading rates high when this is the case. Is - this usual?

    Any help would be appreciated!

    In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

    If you have any questions do not hesitate to ask

    Please run the trace when you encounter the problem
  • Why use high svchost.exe SO?

    So, I have 25% usage all the time, what is Microsoft do? Can I fix other than to go to win 10?

    [moved German forums]

    I'm talking about money it is updated for windows. Set never 'Find updates' automatic updates, restart, and install the client update KB3161647, only available in June 2016 cumulative patch.

    https://support.Microsoft.com/en-us/KB/3161608

    Best regards, VZ :)

  • Satellite R630-14 days - adapter are a constant high noise

    I don't know if it's may be normal, but I think that my charger did not have this noise a few months ago.
    I got my Satellite R630 14 days in November 2010.

    Since a few weeks my charger will beep (a very high constant noise) when my laptop gets loaded or even when the charger is plugged in the computer.

    Everyone is the same a issue or whether it is a case for Toshiba support?

    Thanks for the reply
    Nicolas

    Hello

    The constant high noise could be caused by broken AC adapter cable.

    This noise is normal for power and appears especially if a cable or an AC adapter is defective.

    I think you should test a new adapter.

    Good luck

  • DPC high latency on Windows 7

    Hey there! I had problems with my audio since the first day. The audio has always been "burst" and "Crackle", which really annoyed me. Because of this problem, I really only used USB-headset, because the problem did not exist there. Then I tried using the outputs audio normal, once again and to my amazement it worked without problem. A few days ago and then it turns into the same audio-* it used to be. Then I tried researching the topic, and I just found out that my time of DPC latency is extremely high - constant 9000 +. I then tried to use LatencyMon, which has been able to tell me the following:

    This photo was taken of course after a few minutes of running the program, but you get the idea. I'm not sure how to handle or fix one of these, but the audio problems are really driving me crazy. I hope you guys can help!

    Hi Nick,

    You did changes to the computer before the show?

    The problem seems to be caused by DirectX Graphics kernel, the Port SCSI driver memory related or some third-party programs, the origin of the problem.

    Method 1: First of all, I suggest you to run Windows diagnose memory problems on your computer to check whether the problems are caused by the RAM.

    Diagnosing memory problems on your computer
    http://Windows.Microsoft.com/en-CA/Windows7/diagnosing-memory-problems-on-your-computer

    Method 2: I suggest you to update the drivers for all the hardware on the computer.

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-CA/Windows/Update-driver-hardware-ISN

    Method 3: I suggest you perform the clean boot. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

    How to perform a clean boot in Windows
    http://support.Microsoft.com/kb/929135

    Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

    See also the link:
    DirectX Graphics kernel
    http://msdn.Microsoft.com/en-us/library/Windows/hardware/hh451568%28V=vs.85%29.aspx

    I hope this helps. Let us know if you have other problems with Windows in the future.

  • Satellite M40 - how to use the recovery cd

    I have a laptop Toshiba Satellite M40 using XP Home
    My anti virus has caught a virus and delt with him.

    He told me to reboot, which I did. When he started toward the high winlogin.exe TI displayed cannot start because it is missing shell32.dll
    I clicked OK and it showed lsass.exe failed to load because it is missing shell32.dll
    I clicked on OK and a message showed the user interface login user interface dll failed. Msglna.dll failed to load. replace or restore the original dll.

    I restart and it brings back me to winlogin.exe message.
    Normally I upload these files and install them, but I can't the computer on at all.
    I can't get the safe mode or safe mode with prompt orders and last known configuration failed.

    I have a Toshiba restore disk but I don't want to do a full reformat and the other option on the drive says not to use it if you know what you
    made with files - and I do not have.

    I watch the options he had, but it just made no sence and would not make my situation worse.

    I hope someone can help.

    Thanks much sally

    Hello!

    Looks like you have a strange virus on your laptop

    But I put t know why you don t want to do a complete reformat of the laptop. The point is that the Toshiba Recovery disk contains a picture of the factory settings. This means that you can restore t that only some files and you need to do a complete reinstallation of the operating system. To be honest, I think that it is in any case the best solution, because I think that the virus can only be deleted if you format the HARD drive using the Toshiba recovery disc.
    To use the only recovery disk, you must boot from it and follow the instructions on the screen. It of easy to use and only takes a few minutes.

    If you want to save some files before you begin reinstalling Windows, you can put the HARD drive into an external HARD drive enclosure. Then you can back up your data from another computer. I did it and I have had success with this and maybe you too. It s worth a try.

    And let me give you a little advice. After you have reinstalled Windows to use a good antivirus program and keep up-to-date. I have a good experience AntiVir (Freeware) and Kaspersky. In addition to activate the Windows Firewall or you use another firewall. Don t forget to install the latest Service Pack for your operating system and activate the Windows automatic update function. If you can get all of the updates in a timely.

    I hope I could help you, and now you understand the best deal.

    Good bye

  • trigger the meter manually

    Dear community,

    I'm fighting a problem with the start of a task is triggered counter.

    environment:
    -Card: USB-6218 offer using the NOR-DAQmx driver last 9.7
    -OS: Windows 7 x 64
    -platform dev: MS Visual Studio 2010 (C/C++ language)... but don't mind if someone comes up with a solution of Labview

    configuration of the card:
    - redeclenchables counter 0, which begins to generate an amount over of clocks (100 to 1000) to pre-defined, high frequency (200... 250 kHz) when it receives an front amount on PFI0
    -Counter 0 generates the sample clock for two analog output channels (AO0 AO1, number of samples is finished because finity of generated clocks)
    -Counter 0 is also output to standard digital pins (PFI 4 / P1.0) and then smoothed (creates high constant on "clock" constant low orr on "no clock")

    process:
    -NI DAQ card starts the output on AO, 0 and 1 for a predefined period
    -While the clocks are generated, my most smooth guard PFI 4 high
    -When the build is finished, the output of the smoothed counter 0 generates a falling edge (from 'impulse last clock' to 'no more clocks'), which triggers a device X
    -After device X is completed, it generates a rising edge on the entrance of counter 0, which starts clock and so begins the power on A0 0 and 1 new
    - and on and so forth...

    problem:
    -Could not find a way to start the whole loop between NI DAQ card and device X, because I can not activate the counter 0 trigger manually
    -I can't control device X to send me a trigger, because it is technically black box... or call "dumb piece of Electronics" ;-)

    what I tried:
    -creation of a digital output task, what output axis reconnects on pin source Counter 0; does not work, because digital ports can be shared over the borders of the stain on the M Series devices. also I can't reach a single PIN to a task (software exception)

    Any ideas?

    Thank you for reading,

    Mr. Paul

    Hello Charles,

    Unfortunately I have no screenshots of VI, because it is coded in C.

    But I solved the problem:

    It is possible to have a task of external digital output, which is launched while the task retrigger, and the analog output task is already running. This task is defined by program to create a short pulse. Digital output reconnects to the digital input used for triggering.

    My mistake, it's that my card has only one output port digital, but a different task claimed the 8 pins of this port. The other task is only now claiming a single port pin, so the other pins are free to use for additional tasks.

    Thank you for reading,

    Paul

  • VISA read where you don't know the number of bytes?

    I work with a VISA resource via the USB port that reads in the results of printf (% lu % TSP %d)) of a microcontroller. These results are as ASCII numbers, their length in bytes is unknown. Numbers * should * be not more than 3 digits, but I can't know that for sure. Reading VISA won't let me the number of bytes unwired, so should I join just a high constant let him? Or is there a better way?

    1. do you have the microcontroller send a character to end of line (0xA on the ASCII table) at the end of the printf.

    2. turn the stop of the session VISA character and the value it is 0xA.  You may need to perform this task via the VISA property node.

    3. playback VISA to read more bytes than you tell never expect to get.  VISA playback will stop reading when it detects the termination character (End Of Line).

  • Shift register no

    I am new to multisim and indeed digital theory in general. I am trying to wrap my head around shift registers, and I hope someone can help out me.

    A circuit with a 74164 conduct 8 LEDs is attached. I filled A & B high if it is enabled and has a HIGH constant, be entered into the registry. The switch acts as a clock pulse to slow things right down. CLR is connected to the Earth.

    I would have thought that you simulate a clock pulse by flipping the switch, the LED output would start low and starts moving the TOP signal outputs to each clock pulse down. But no, all lights remain low.

    Someone can give information me on what I know is a fairly simple problem? Is my circuit, nor my reasoning wrong?

    The light is very active. Attach it high.

  • Windows 7: error 5 (access denied) when you try to start the Volume Shadow Copy (VSS) service

    System: Win 7 Ultimate x 64 on a HP Pavilion DV6. My account is the user account only suitable on the laptop and an administrator account.

    When you try to do a system restore, it came with an error that the Volume Shadow Copy Service did not work, even if this error code is not relevant for the purposes of this question later, I managed to run the system restore in SafeMode to an old restore point...

    When you try to turn on VSS, I checked services.msc (which I ran as administrator) and VSS was off and on the manual. I tried clicking on start, the following error message came:

    "Windows didn't start the Volume shadow copy on the Local computer service."
    Error 5: access is denied. »

    I then switched to automatic and tried again, same error. I tried since everything I can possibly think (including the definition of back and forth between manual & auto then trying the solutions below) to get the service starts, nothing helps. The solutions tried so far:

    -net start vss high cmd - returns the same error (error 5 access is denied)
    -high vssvc.exe cmd - same
    -changed the full control permissions for me, the group admin and NETWORK SERVICE (that I had to add) to the System32 folder and vssvc.exe but no change
    -changed the permissions to full control for myself, admin and NETWORK SERVICE group (who even once, I must add) for VSS in regedit (open as administrator) still nothing
    -even tried to restart explorer.exe a high cmd and a task manager high and again made the permissions - still nothing.

    The only thing I haven't done is run a sfc scan, but tbh, I doubt that will fix anything. It also seems that VSS has been turned off for a while, as my last restore point was about 3 months ago and I installed things since.

    Any suggestions/ideas would be appreciated, because I'm going nuts with that now! Thank you!

    The Volume Shadow Copy Service must not be on auto-start.

    According to the site TechNet Microsoft VSS THAT was introduced with Windows XP SP1 and since that time it has always installed as manual start since he does not need to be started automatically and it works day and night to do nothing.  Some places say different times when VSS has been introduced, but be sure that it was a long time ago.

    A popular site to see how Windows Services should / could be put in place is here:

    http://www.blackviper.com/service-configurations/

    If you've read about VSS on Microsoft TechNet, it says:

    https://TechNet.Microsoft.com/en-us/library/hh125927 (v = ws.10) .aspx

    So do you think the MS TechNet site is fake and that each installation of Windows since XP has a badly installed VSS Service?  If that were the case all Windows systems in the world would be in trouble.

    On an unafflicted system if you open the services applet and observe the VSS Service, it should look like this:

    So if you start a backup operation or even create a Restore Point, go back to the Service applet and press F5 to refresh you'll see that the VSS Service changed its status to start:

    Once the operation is complete the VSS Service will stop itself (it may take a while).

    That's how it is supposed to work.

    We should certainly be able to affect the automatic VSS Service and you should be able to start, but you shouldn't need to.  People who say that "solved their problem" forgets to mention the days/weeks to try things that lead to get their system of work.  There is no way of knowing which of the dozens of things that they could have tried really solved the problem.

    You say that the system restore worked in Mode safe (but not a normal startup) and if it is true that means usually something to load in a normal trunk causing a problem and that something is usually an antivirus/antimalware application that is 'protect' your system against the changes.  When you start mode safe these things are usually not loaded this is why sometimes your system restore mode without failure.

    Contributors known for these programs are Norton, McAfee, Avast, Avira, Kaspersky and probably others.

    So what antivirus/antimalware programs you are running and have checked their support pages for known problems with backup/restore system restore?

    Norton has even a page about these issues:

    https://support.Norton.com/SP/en/us/home/current/solutions/v51118464_EndUserProfile_en_us

    Even McAfee told their product to uninstall completely before doing a system restore:

    "Intel Security recommends that you remove McAfee security products before to proceed with an upgrade of the operating system or the Microsoft System Restore and then re-install your McAfee product when the update/restore is complete. "

    So I assumed that whatever your AV program happens to be could be part of the issue here - but we don't know what it is.

    We know error 5 is a permissions/access denied error type, but you shouldn't make adjustments to get VSS to start if something is wrong.  If as you have tried adjustments have been necessary every Windows system in the world should also make these adjustments and coming is not past.

    Of course, now, your system might be more affected since you've been changing permissions on the things trying to VSS to start when there is probably not a problem with VSS in the first place, so who knows what condition are in now.

    You could start by uninstalling what your AV software (most manufacturers have a special program for that) and by eliminating third-party applications that are known to interfere.  You can always reinstall them again later, no?

  • Cannot get windows media center in windows 7 ultimate 64-bit update as well as digital cable Advisor is displayed. ____

    Cannot get windows media center in windows 7 ultimate 64-bit update as well as digital cable Advisor is displayed. All I have is the not the Gallery library. I tried via tasks > General > auto update > download now and via high cmd.exe cd %SYSTEMROOT%\ehome
    start/wait mcupdate-u

    Uninstalling firewall antivirus and the disabled. Also tried with firewall on and gave the program and full access to the client update. Also tried with windows firewall on and off nothing doesn't work.

    And, now that I'm home and connected to...

    As promised, here are the download links for the DCA Installer:
    x 86: http://go.microsoft.com/fwlink/?LinkId=195559
    x 64: http://go.microsoft.com/fwlink/?LinkId=195560

    Re-reading your first post, I see also (this time) your Extras Gallery is completely absent.  You probably want that, Yes?
    This post to thegreenbutton should help it get there.

    Kind regards
    Chris

    MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • TiWorker 50% of CPU and the update does not work somehow

    I just bought a copy of Windows 8 Pro and I see that there is a process eating up 50% of my CPU.

    It is called "Windows module installer worker'/ TiWorker.exe.»

    I tried to run a few updates in the hope that he will fix it (but why aren't the updates included in version 8 to win that I just uploaded today, I don't know). I can't update anything.

    I am very frustrated because I lost 6 + hours of my weekend on it and while I was excited to Win 8, it turns out that it is such a complete waste of time. Amazing and if it is not midnight, I would be at half way through the installation of Windows 7 now.

    I had the same problem on my Toshiba Z30t running Windows 8.1 64-bit Pro. Shortly after this unpacking, I have run Windows Update, and after 30 or so updates have been downloaded and installed, high TiWorker.exe his head and gradually resumed close my laptop.

    After a lot of Googling on the last days, I ended up the advice in this column bit-tech at the failed subject update of Microsoft for the maintenance of the battery.

    Opening line of command in administrator mode, I ran the command Deployment Image Servicing and Management (DISM) with the following switches:

    DISM / online/cleanup-image /restorehealth

    And after a reboot, no TiWorker.exe more not hogging my Z30t, even when I left it inactive.

  • [JS, CS4] Document window resizing

    Hi all

    Problems resizing the document window main with the script fragment below. Used to work perfectly in CS3. In CS4, if the document window is maximized and then run the script, it works: it makes the smaller window. If the doc window is smaller than the maximum size and the script is executed, it maximizes the doc window: it is not the size specified in the script. In other words, every second time the script is run it works; other times, it maximizes the doc window. Have tried to use smaller values for the size of the victory, but no matter what values are.

    Any idea what goes wrong? It's a little annoying problem for me...

    ===

    left const = 0;  high const = 50; right const = 200; low const = 200;

    win = doc.layoutWindows [0];

    var limit = win.bounds;
    limits [0] = top;   limits [1] = left;   delimits [2] = low;   delimits [3] = right;
    Win.Bounds = limit;

    ===

    I tried to do the foregoing point variable victory at app.activeWindow on the contrary - still does not work.

    I hope someone can help...


    Paul

    I have no clue why InDesign, change the size of windows on the second consecutive time on the script.

    Try code below, hope this will help you:

    var doc = app.activeDocument
    const left = 32;  const top = 105; const right = 1500; const bottom = 1500;
    win = doc.layoutWindows[0];
    if (win.bounds != top+ "," + left +  "," + bottom + "," + right)
    {
    win.bounds = [top, left, bottom, right];
    }
    

    Shonky

  • Vista Home Premium lsasse.exe/o HIGH - non-stop

    This isn't a problem of malware/sasser.

    The question I have is cited in hundreds of threads back on the history of Vista, and nowhere can I find an answer.  I don't work for small business tech and try to avoid VISTA, but sometimes I can't - what is a.

    The specific platform is an IBM Thinkpad T61 with the original OEM Windows Vista Home Premium x 86.
    I removed the bloatware and system carefully cleaned up everything, need updated drivers and VISTA is up-to-date.
    One question remains, which is a rampant lsasse.exe that accumulate i/o reads and writes to the rhythm of 3 ticks/s before shutdown or restart (or sleep).
    It is not uncommon to see a 50 000 or more, I / S for lsass.exe in work a short day of.
    I posted this problem in some of the best forums on the web, with no good response - in fact, it seems the more 'expert' mods and members are, the faster they run away from the issue.  What is the 'dark secret' or something that the mere mention marks one as radioactive?
    Should I perhaps remove/replace the program/windows/system32/lsass by a later version of Windows 7?  I noticed on my thinkpad running windows 7 Home premium the accumulated I / O for lsass.exe in everyday use is trivial - less than 10%, the number of Vista system will run even when it is idle.
    Please notify.

    Hello

    I suggest you to try the suggestion mentioned in the link below and check if it helps:

    A problem of leak memory in the Lsass.exe process causes an application or a service stops responding if the application or service using NTLM authentication on a computer that is running Windows

    http://support.Microsoft.com/kb/971265

    You can also post your query on TechNet forum to get help:

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  • Lsass.exe high usage of RAM

    I have experienced this problem with lsass.exe using large amounts of RAM for several weeks now. I went through hours and hours of searching without result in a solution.

    I created a dumping ground for this but I really don't know what I'm looking to. I also attachced a debugger and it seems that something is wrong, but to be honest I don't know what it's supposed to look like.

    some images of debugging:

    https://onedrive.live.com/redir?RESID=E08739F332F70B13! 113859 & authkey =! AIh97hH0Kyhi9-4 & v = 3 & ithint = % 2cPNG photo

    https://onedrive.live.com/redir?RESID=E08739F332F70B13! 113860 & authkey =! AJtdGeDI1r0qA_A & v = 3 & ithint = % 2cPNG photo

    https://onedrive.live.com/redir?RESID=E08739F332F70B13! 113861 & authkey =! ALr0kh2xuAag1f0 & v = 3 & ithint = % 2cPNG photo

    It's the top to where the bottom is just constantly going. Access denied pretty much just spam rather quickly. and I don't know what it is even about.

    Here's the .dmp file

    https://onedrive.live.com/redir?RESID=E08739F332F70B13! 113863 & authkey =! AM73L3Je1oosOMk & ithint = the file % 2cdmp

    Information to solve this problem would be appreciated. Currently, I just restart my computer when it gets completely bogged down.

    TIUL

    I don't know why you think you have a problem of "lsass.exe".

    If you have problems other than accidents you can have other problems in the system.

    I would like to run a file system check

    I have not downloaded the DMP because it's on 3.5Gigs.  Must reconfigure your system to generate a small DMP

    Please run a check of system files (SFC) 


    All instructions are in our Wiki article below...
    If you have any questions please ask us for .

Maybe you are looking for

  • Can I get the IP address used by other devices for synchronization?

    One of my machines was stolen. I wanted to know if I could find it using the synchronized information. I hope that there is a way to determine the IP address, and then contact the owner of this IP block to see if they can help me more. Is this is pos

  • Half of my app icons went dark

    Half of my app icons went dark on my iPhone 5s. When I click on it says pending and is still dark I checked my settings and updates that seem normal. What is the cause of this?

  • I can communicate between PC and cRIO throughout the series?

    I'm new to the compactRIO. I have a lot of experience with the old Fieldpoint hardware. I understand that they are essentially diffeentliy. The RIO has its own processor and can run stand-alone programs. The Fieldpoint was really just IO for a PC. I'

  • Remote Desktop stop working after update

    Anyone know why my remote desktop connection did leave work after upgrade to Win 7?  It works in my other computers, so I know that this isn't their server or my credentials.  I checked the box for allow through firewall remote desktop, but I wasn't

  • I can't use the software in terms of creative photography of cloud

    I have purchasaed about 1 month ago. I used a trial version. Yesterday I paid for the next month. I see my payment information. Can I use software until 8 June.If I run lightroom or photoshop, I see "trial has expired". I tried to delete them all and