LT2323z - connect to the USB 3.0 Port Replicator

Similar Questions

• My laptop does not recognize that anything that is connected to the USB ports

  Help, please. My laptop does not recognize that anything that is connected to the USB ports.

  Moved from feedback

  Original title: problems with USB ports

  Hi Alba.

  1. who is the operating system installed on the computer?

  2. What is the brand and model of the computer?

  This issue may be caused if one of the following situations arises:

  • The currently loaded USB driver has become corrupt or unstable
  • Your PC requires an update for problems that could conflict with an external hard drive USB and Windows
  • Windows may be missing other problems hardware or software updates
  • Your USB controllers may have become corrupt or unstable
  • External drive can enter selective suspend
  • Your PC motherboard may need updated drivers

  I suggest to connect the USB device to a different USB port and check.

  You can run the Fixit provided in the article and the Coachman.

  Reference:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  You can also try the steps in the link and check if it helps:

  Reference:

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Note: Apply to Windows 7 as well

  Hope this information helps. Response with status so that we can help you.

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• How can you stop safely remove hardware to appear when there is nothing connected to the USB ports?

  Orifginal title: Aggrevation

  How can you stop safely remove hardware to appear when there is nothing connected to the USB ports? It is causing my screen lock and give an error does not.

  Hi ElginCarelock,

  You can try to restart the computer and check.

  Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer and check.

  Hope this information is useful.

• Aspire One D255E don't look for a printer connected to the USB port

  My D255E an Aspire don't look for a printer connected to the USB port.  I've never used a printer on this computer before.  Windows 7 Starter will support a printer?

  It should be.  Try these steps and results reports:

  When you turn on and connect the printer via USB, shows tasks for animation in the system tray at the right end of the bar, click it and monitor driver installation.  If the pilot goes then printer must print and perhaps scanning of base via the Windows fax and scanning utility.  To find such a piece of utility type its name in the search box.

  If the driver does not load type of devices and printers in the box to start the search, open it, check if printer is already displayed, right-click on it to open the properties, and try to print a Test page. If it does not print right click on printer again to solve problems.

  If the printer is not listed visit Support downloads of the printer Web page to download and install the base driver.  If a wireless printer, you will need the complete package to do it fully implemented.  If you want to be able to scan from the top of the printer to the PC, then you also need the full package.  Keep track of the configuration screens when you install the software.

  If you still have problems after return the exact error with photos if possible.

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• The USB 3.0 port no longer works

  Hi all

  I have a laptop ASUS UX31E running Windows 8.1.

  WD Elements Portable USB 3.0 external hard drive has been plugged on the USB 3.0 port, the lid of the laptop was closed (the portable computer has entered) and the external hard drive was then deleted (IE without clicking 'Remove the device safely').

  Since then, the USB 3.0 port does not respond. No device is detected when plugged into the USB 3.0 port, but they are detected when plugged into a USB 2.0 across the laptop.

  When the external hard drive is connected, the light comes on but there is no vibration felt, which means that it does not even turn.

  I have run Windows Update and installed all the updates available, but have not solved the problem.

  I have run the hardware troubleshooting tool, but have not solved the problem.

  Under "Universal Serial Bus Controllers" in Device Manager, it lists:

  Generic USB hub

  Generic USB hub

  Family of chipsets Intel (r) 6 Series / C200 Series USB Enhanced Host Controller - 1 26

  Realtek USB 2.0 card reader

  Composite USB device

  Composite USB device

  USB root hub

  Am I right in thinking the USB 3.0 is not yet listed here?

  I tried to reinstall the USB 3.0 driver fresco from the ASUS Web site, but it gives the error message "Fresco Logic USB3 Host Controller is not found!"

  I then tried to reinstall the driver for chipset from the ASUS Web site, it installs without error, but does not solve the problem.

  I know it was a software problem on USB 3.0 ports and a feature of Windows 8.1, but the update of Windows to save energy which should have fixed. There is also a patch available, but my situation is not exactly as described for the fix so I am hesitant to install it.

  Anyone has any ideas on what else to try?

  Am I right in thinking the computer does not detect the USB 3.0 port is still there?

  Thanks in advance

  Chris

  In Device Manager, if I click on view > show hidden devices, the USB 3.0 port appears greyed out. Under the status of the device in the properties, it says

  "Currently, this hardware device is not connected to the computer. (Code 45)

  To resolve this problem, reconnect this hardware device to the computer. »

  How can I re - connect a USB 3.0 port internal in a laptop?

  Hi Christa,

  The issue seems to be with the material. I suggest contacting the manufacturer of your computer and check if the USB ports can be replaced.

• Error "connection of the USB device was unsuccessful.

  I can't connect my USB device to the guest operating system when I use one of the USB ports on my computer.

  VMware gives an error like:

  The connection of the USB device has failed. The device is currently in use.

  However, when I use the other USB port, the device connects successfully to the guest OS. How can I solve this problem?

  My host OS is Windows 7 64 bit.

  I doubt that it will have nothing to do with the SD/MMC.

  This could be useful. I wrote and published a few days ago.

  Host and guest OS USB 3.0 xHCI virtual support with Workstation 9

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2041591

• Tecra S5 - slow ethernet with USB 2.0 Port Replicator

  Hello

  I have a Tecra S5 with USB 2.0 Port replicator II. I have 3 ethernet connections all together on my PC: LAN on motherboard, WiFi and the other on the USB port replicator.

  At home, I use WiFi for internet connection and USB to Ethernet to a wired connection to devices with built-in web server.

  My problem is that when the WiFi and USB to Etherenet is active the internet and the connection to the web server works but vey slow.
  If I turn off the WiFi and connect to the web server works properly.
  If I disable USB for Ethernet internet connection works correctly.

  Anyone has same problem and suggestion how to solve?
  I downloaded the latest drivers from the Toshiba support page.
  My OS is XPSP2.

  Concerning
  jballa

  Hello!

  It looks like a network configuration problem. Check the network addresses and configuration in command line with the command ipconfig/all.

  Try using static IP addresses. I think that the DHCP server takes a long time to go send an IP address to each laptop.

  Good bye

• Satellite Pro M70: What USB 2.0 Port Replicator is compatible?

  Would be grateful if someone could advise me on the purchase of a USB 2.0 port replicator.

  I think the 3 USB 2.0 ports on my laptop Pro M70 are not enough, and that's why I want to buy a USB 2.0 Port Replicator.

  The site of the Toshiba shop specifies USB 2.0 Port Replicator II (UK) with port network, part number: PX1173U-1PRP, price: 49,93 GBP.

  It has 4 USB ports 2.0, which would give me a total of 6 USB 2.0 ports, which would be the absolute minimum I want. (It also has 2 PS/2 ports, 1 serial port RS232 and 1 USB 2.0 port network that takes in charge rates of 10 / 100 Mbps).

  Can anyone tell if it is powered by the laptop, or by it's own adapter?

  Unfortunately, the Web of Toshiba site has advised that it is currently out of stock and are difficult to get in on all the time, as they are the subject of a sort of "green manufacturing" test.

  This prompted me to consider buying a replicator USB 2.0 ports alternative and all I would prefer one with more than 4 USB 2.0 ports, and in fact 6 or more USB 2.0 ports would be preferable. I'm not really interested in other types of ports that are often provided with the replicators of USB 2.0 ports.

  I would be grateful if someone could recommend/Advisor at a replicator USB 2.0 ports alternative that would be compatible with my laptop Pro M70.

  One of my concerns is how the port replicator USB 2.0 Port is powered. I think I would have preferred that the unit is powered by its own adapter, I understand is 5 Volts with 500 milliamps for each port, rather than to the laptop (probably would be less tax on the laptop, with less heating).

  Thank you
  AlanCB

  I can't comment on the question whether the Replicator you mention has its own power source, although I suspect, he does

  However, I have a satellite Pro M70 too and with a similar problem and wanting a hub to connect to all my external printers, Sandy etc using just one connection, I buy PA3390E-1MPM - a hub of Toshiba, Audio/USB multimedia center, which goes a step further and provides a hub not only for USB sources , but also for the speakers etc.

  It has its own power supply to the unit and connects via USB 2.0 to my laptop. It is also stackable with the Toshiba Gigastore 250 GB USB 2.0 external hard drive (PA3392E-1MPS) which I also use for backups, storing external data etc.

  Had the two units for 3 months now and everything works fine. I got headr of some problems with people in loss of access to the hard drive, but it seems that it was never if it has been disconnected by pulling the cord out usb, rather than make a ' Safely Remove Hardware to disconnect the USB device and so far have had no probs at all

  It has 4 ports, more port network and connections from the speakers for the configurations 2/2.1/4/4.1/5.1 full, more Creative software like drivers, more remote control useful to control audio devices. Oh, and also a Surround sound, and EAX

  Maybe a little more of your option, but worth it in my opinion. If you can't find it on the Toshiba site I have purchased from www.insight.com

  Hope that helps
  Steve

• Toshiba PX1173E - 1PRP USB 2.0 Port Replicator II windows 7 drivers

  Hello, I can, t find windows7x64 drivers for my Toshiba PX1173E - 1PRP USB 2.0 Port Replicator II. I find the driver for win vistax32, but it's not work.

  Hi Michel,.

  The point is that 32-bit drivers will not work on a 64 bit OS and you can get all the drivers on the Toshiba page:
  http://EU.computers.Toshiba-Europe.com

  But it seems that there is no 64-bit available driver and you can use t Port Replicator II with 64-bit so far :(
  Maybe Toshiba going 64-bit in the near future

• CarPlay audio quality of the voice when it is connected through the USB port is poor vs Bluetooth on Pioneer AVH-4200NEX

  Hello!

  I recently installed a Pioneer AVH-4200NEX unit, I was super excited to improve my car with the support of CarPlay, and everything works great except for one thing.  When I connect my iPhone (6s +) to the unit via a USB cable and a standard phone call, the audio quality is very bad - hail, very downsampled, and metallic sounding compared to the use of Bluetooth via the unit to pioneer for the same phone call (I'm on LTE, using HD voice, although the quality difference is quite noticeable on the calls not HD and on the 4 G calls).  I looked for an answer to this question, but the best that I can find mention of limited USB bandwidth and try to juggle than the bandwidth for the rest of the CarPlay experience, although I don't buy not because audio via the iPhone connected with USB playback is just as clear that it is through Bluetooth.  So my question is: How can I submit a bug report Apple about this behavior and (b) do you have other CarPlay users also be known this recent problem on a unit of Pioneer NEX (AppRadio included)?  It would be great if this is a bug of Pioneer for which they can release a firmware update, I'm just worried that it is a codec problem specified by the CarPlay, so non repairable.

  Thank you!

  -Seth

  Hello served,

  Thank you for using communities of Apple Support.

  I understand that when you use the USB cable for your iPhone in your car with the audio CarPlay is mediocre. I know how it is important for you to hear your calls clearly. In a situation like this, I recommend the steps described in the following article to help solve the problem.

  Configure CarPlay to use with your iPhone

  Specifically the section to get help:

  Get help

  If CarPlay does not work as you expect, here's what you can check. After each step, try to use CarPlay again.

  1. Make sure that Siri is turned on.
  2. Restart your iPhone and your car. Depending on your car, you can see the CarPlay home screen when you turn it on. If you do not, look for the CarPlay logo on the screen of your car.
  3. If possible, connect your iPhone to a different USB port in your car.
  4. Try a different lightning to a USB cable. Make sure that the cable is certified.
  5. Update to the latest version of iOS.
  6. Check the manual using your car. You may need to install updates of firmware for your stereo.

  See you soon

• need a HDMI cable to connect to the macbook pro via port USB - C

  Could someone please indicate what cable or adapter I need to run my MacBook Pro to a TV movies? It connects on the port of lightning or another? Thank you Jude.

  No MacBook Pro has lightning ports or ports USB - C.  Most have ports Thunderbolt, and some have even regular HDMI ports.

  The adapter you need to depend on the exact model of MacBook Pro you have.

  Until we can tell you what cable or adapter you need, you must tell us what model of MacBook Pro you have.

  You can watch in the Apple Menu-> about this Mac, option and after the year of model here.

  How to identify MacBook Pro - Apple Support models

• "This USB mass storage device can transfer information faster if you connect it to a USB 3.0 port Superspeed ' when the device is already connected to a USB 3.0 port.

  I just bought and installed a USB 3.0 card. It is the Startech PEXUSB3S2 PCIe card. I installed the card in a PCIe 2.0 X 1 slot. The manual says it's exactly the slot, that it supports.

  The Manager device displays NEC Electronics USB 3.0 Host Controller and NEC Electronics USB 3.0 Root Hub are installed and are working correctly. I have a Thermaltake BLACX5G 5 G USB 3.0 hard drive caddy. The transfer rate is only 35 MB/s using the HDTune benchmark. It is a USB 2.0 speed.

  When the player is turned on, windows displays the message "this USB mass storage device can transfer information faster if you connect it to a Super speed USB 3.0 port»

  For some reason, the system doesn't see the caddy to drive USB 3.0 as being plugged into a USB 3.0 port, when it actually is.

  I remember having this same problem with Windows XP, when I bought a USB 2.0 card. The only thing that fixed it at the time was upgraded to XP SP2.

  This should not be a problem because I know that Windows 7 pro 64-bit supports USB 3.0.

  My motherboard is an ASUS P5QL-EM support an Intel Core 2 Quad and 4 GB of DDR2 memory. According to the manual owner the PCIe x 1 slots support architecture 1.0 and 2.0.

  Edit: I just tested the external hard drive and expansion card USB 3.0 on my motherboard Gigabyte of friends running Windows XP. Everything worked perfectly, no problems at all.

  Here, there is a problem with Windows 7 or the motherboard. Still unresolved, currently installs a floppy drive so I can update the firmware of my motherboard.

  I checked the implementation of the card several times, removed and installed in another motherboard to test, then removed and reinstalled again in my motherboard ASUS check several times for a fit course.  It still does not work. I have just completed update the firmware of the motherboard with the latest version, and I also did a new install of Windows 7, install the drivers USB 3.0 immediately after installing Windows over. None of this solves the problem.

  I'm running out of ideas on how to fix this without doing something drastic as a replacement for my motherboard. I don't want the speed of USB 3.0, but I don't think I'm ready for an another two or three hundred dollars to get it.

  I've been all over the ' net trying to find a solution and read tons about USB USB 3.0 specifically and in general. I can find no reason why the drivers would install and report that they are working correctly, but fail to connect to 3.0 speeds. I think that this would generate a certain type of error instead of such a strange symptom.

  EDIT:

  Here go us. I knew that is was a bad idea to buy one main (ASUS P5QL-EM) card that had to be overclocked to 1066 MHz for DRAM memory. I did all this work, and every time I reset my BIOS or updated it would always be the frequency DRAM back to where it should be (1066). After a reset of the computer was the starter and I just let it start instead of setting the DRAM frequency and, suddenly, USB 3.0 card worked perfectly. I confirmed this by setting the frequency to 1066 and looking at the USB 3.0 card fail again. I guess it must have something to do with the clock being sent to the PCIe bus.

  In any case, the USB 3.0 card works perfectly and gives me a transfer rate HD Tune to 99 MB/s on a drive from WD SATA 7200 RPM and 86.1 Mbps on a Samsung drive hard 5400 RPM / MIN 3,5 "SATA. These are the same reference points I get when these drives are connected to my internal SATA connectors. I'd say USB 3.o works perfectly now and maxing out the hard drives performance.

  Thanks for any help.

• How to read the data in a device connected to the usb port

  Is there a class or object, or the piece of code in Java that is comparable to the PDQComm32.ocx and the mscomm32.ocx used in VB6? I need to know how to read the data of a device plugged into the usb port of the BBerry. Is it possible to use the BB to read data from a device via a usb cable?

  I'm new in Java and I'm looking for the opportunity to write a project to read the data in a device with this program that can turn on a BB instead of on a pc.

  Thank you

  Did you watch net.rim.device.api.system.USBPort?

  That's what the doc says:

  Provides access to the USB port of the device.

  Avoid using this class in applications, as it is not portable. On the contrary, if you need to access the USB port, use factory CLDC Connector to serve a connection.

  Rab