Lumenera cadence

Hello

I use a camera Lumenera for my LabVIEW project. I download everything and it works fine except the cadence. In LuCam Capture, I can set the frame rate to 15,05 fps, fps 7.52, or 3.76 fps. How can we define this in LabVIEW? It takes more than 100 ms to make a quick glance (so I guess that the default setting is 7.52 fps) and I would do it faster. Here are the settings I can change for the camera:

The exposure time is set to 5 ms and the delay of the exhibition is set to 0.

Do you know how I can change the frame rate?

Thank you

Stephanie

I contacted Lumenera. There is a VI called 'LuSetProperty.vi' and the setting is 'instant clock speed. The default value is 106, and if we put the value 0, it will be faster.

I don't know why they haven't put it in the entrance of the snapshot settings...

Thank you for all your help,

Stephanie

Tags: NI Software

Similar Questions

  • Can I connect a Bluetooth monitor and bike cadence monitor simultaneously for 5 s iPhone

    Can I connect a Bluetooth monitor and bike cadence monitor simultaneously for 5 s (iOS 9.2) iPhone?

    Hi thepaulbarlow,

    Welcome to the communities of Apple Support! I'm sure we can help you with your question. In general, the iPhone should be capable of supporting multiple Bluetooth devices, as described in the following article:

    Manage the health data from multiple sources on your iPod touch, iPhone, or Apple Watch - Apple Support

    If you have any questions for matching one or the other device, you can find information and the steps in the following article useful:

    Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch - Apple Support

    See you soon

  • Lumenera Infinity 2 camera Communication issues

    Hello National Community Instruments,

    I am trying to get a 2 Lumenera Infinity camera to work with LabVIEW.
    I downloaded the http://www.lumenera.com/support/downloads/microscopy-downloads.php sheet

    I also downloaded NI Vision with its pilots IMAQdx and IMAQ according to needs.
    However, whenever I try to load an example, or even to add a block of program it starts asking for NILuAPI.dll
    This file does not exist in the plug in.
    I was wondering if anyone had experienced this or if it was just a case of a file with the incorrect path.

    Solution?
    It was a little confusing that request since they refer to National Instruments when it comes to LabVIEW.
    However, talking to Lumenera was the right path.
    For my particular problem, the NILuAPI.dll file, on what he asked was missing in the standard download.
    You must request this Lumenera and also be sure to ask for the 32-bit or the 64-bit version, according to which matches your version.
    Then move the folder of Lumenara (LuCam) of inst.lib in LabVIEW 2010 (by default it's made)

    and move ot the inst.lib in 2011 (or whichever is yours).

    (this is for the 64-bit version only)
    Finally and above all to move the NILuAPI file in the Windows System32 folder which is located under C:

    Then try opening an example of the LuCam folder.
    Everything should load successfully.

  • Device unknown doesn ' t have a driver? I have a 220 c Lumens digital projector that was purchased without installation CD. How can I find driver software for this?

    I have a 220 c Lumens digital projector that was purchased on Ebay without the installation CD, however, it came with a dvdR that contains some information, but it is all the code and no instruction - unless I don't understand what I read. How to find and install the software driver for it, even after using Windows HELP troubleshooting sections?

    Sunday, September 23, 2012 14:48:37 + 0000, KristopherHart wrote:

    I have exactly this fact already, but the product is no longer supported.

    So, you are most likely out of luck.

    Ken Blake, Microsoft MVP

  • Lumenera DirectShow camera attributes

    I'm trying to get well informed on the contribution of the acquisition of vision software, and I need help.  I am using microscope Lumenera cameras.  I don't have the model numbers in front of me, but I remember seeing information that these devices use DirectShow.  I installed the software of Lumenera.  Then I tired to find the camera in MAX.  Find the camera Measurement & Automation and can snap/grab images.  Insofar as the attributes of the camera, the only options available in MAX are a show and win.  I can change these attributes in MAX.  However, when I say to save, it does not seem to do anything.  Would be good, but not a problem for me.

    My problem is in labview.  I am currently using Labview 2009 SP1 on Windows XP, but we also want to move our development on Windows 7 64 - bit labview 2010 running.  In 2009, I can get all the correct coding, then take a picture.  But I did not understand how to access and change the exposure and gain the attributes as I did in MAX.  I tired contacting Lumenera for documentation of what data types and attribute names, but they tell me that they don't interface with labview, and I need to contact the persons making the driver IMAQdx and DirectX (I wonder if they have said and meant DirectShow).  In any case, I guess it is something very simple, Miss me since MAX is able to get what I want, I just need to know how the code from labview.

    Hi biography,.

    I would recommend looking at the grab and attributes Setup VI found via the example Finder (help > find examples...) Click the Browse tab and look for the structure of directories. Develop IMAQ > IMAQdx Examples.llb > Grab and Setup.vi of attributes).  Here, it will display all the attributes that you are able to set up your camera.  The underlying code to change the attributes before striking.  This should be a good starting point.

    Good luck!

    Lynn

  • HP Pavilion dv7 - 6B 63: cadence slow webcam

    Finally got rid of the error CLScan.dll and Cyberlink PowerDVD and Youcam, reloaded

    Cam works well when I opened Youcam, but oh what a cadence ugly! Maybe 8-10?

    I guess that's maybe computer, but I've seen better on an old Pentium - at least 15.

    Any ideas?

    ALSO:

    HP provides the version 3.5 of Youcam

    CyberLink offers an upgrade to version 6... FOR a PRICE.

    Is it worth the upgrade?

    Should not be a problem. This might help:

    http://h30434.www3.HP.com/T5/notebook-TV-tuners-Media-Center-reply-only/slow-FPS-for-HP-TrueVision-HD-webcam/TD-p/807201

  • Cadence composition 24 or 23.976

    Hi all, I searched online for a clear answer to this, but have not been able to get a firm answer - probably because there are so many scenarios that require unique approaches.  But here's my question:

    I am creating an After Effects animation which will be 1920 x 1080 for presentation festival of film and distribution online, Blu - Ray, DVD, etc..  It was only in animation, so I'm not need match the frame rate.  So the question is, can I build my initial project with the settings of composition of 24 frames per second, or 23.976 fps, or is it still important?  A project built at 24 fps will make out easily to 23.976 for bluray, or is it better to start implementing model 23.976? Could I also well build the comp at 29.97 FPS, then just go out to different cadences of SOUL without significant problems?

    I would use 23.976, especially if it happens in Blu - Ray.   I bet that 23.976 would work at festivals, but first check!  They should have delivery characteristics.  The web doesn't care; It's about rate of weft-agnostic, so it is not interlaced and progressive.  That would be bad for the web.

  • Video is not slow when it is added to the calendar of different cadence

    I have trouble understanding what is happening here.  I have a video shot in 59,94 images per second, and add it to a sequence, which is set to 29.97 FPS.  He rereads normally makes sense, if the first is down to 1/2 frames, but indicator target image says that is not drop frames.  The clip also runs the same length.  The cadence to interpret for the clip in the project window says 59,94 frames per second, so if it is added to a sequence, which is set to 29.97 FPS and there is NOT a drop frames, shouldn't it be slowed down?

    PP works as expected.  Yes, it's to show you all the other images, but the indicator dropped frame one shows that if he does not play back to the proper sequence of cadence.

    If you want to slow down, actually change the settings Interpret something less that's the native frame rate.

  • Ingestion of cadences Multi via prelude or SOUL

    Anyone know if there is a way to view a list of files in the prelude ingest the window and see how often each clip is?

    Because you must apply a "Preset" coding which has a rate of specfic I am at a loss for how to bring footage in which may have different rates by coil.

    I really wish there was a source of match for ProRes option. A God who would make things much better.

    Thank you!

    Danny

    Danny_TGR wrote:

    Anyone know if there is a way to view a list of files in the prelude ingest the window and see how often each clip is?

    Because you must apply a "Preset" coding which has a rate of specfic I am at a loss for how to bring footage in which may have different rates by coil.

    Frame rate is an option that can be displayed in mode list with "viewers of directory" as AVCHD, P2, XDCAM and Canon XF. Switch view list, using the button in the bottom left of the middle section of the dialog ingest (1. screenshot below). Don't forget that the "View As" menu at the top of the middle section is to see your clips as P2, XDCAM, AVCHD, etc. instead of "Leadership Directory" (2 screenshot below). When in list mode, you can choose the columns that appear by clicking on the arrow pointing to right of the middle section of the dialog ingest (3 screenshot below).

    If you use a different format which currently does not support cadence display in dialog ingest, please file a feature request to the team of prelude to the http://adobe.com/go/wish

    I really wish there was a source of match for ProRes option. A God who would make things much better.

    Please inform the SOUL team to http://adobe.com/go/wish/

    SOUL CC adds source of correspondence for some formats settings, so let them know that you want this feature to QuickTime/Prores too. :-)

  • Change of cadence on Time lapse

    I have HD time-faults that have been coded on Prem Pro CS5.5 at 24 fps.

    I want to have these clips to 30 frames per second without loss of quality.

    I can't probably simply take the initial project and re - encode at 30 fps but need to go to the 'long way' and re - import the photos on a calendar of 30 frames per second?

    Thanks for any imput.

    Paul

    Ok.

    Right-click on the item in the tray, and then select Edit > interpret footage.  Change the cadence and add it to the desired sequence.

  • Cadence of an external SWF

    Does anyone know if there is a way to detect the cadence of an external swf and then change the cadence of the original file to who?

    None is possible in as2, but he limited the ability to simulate a change in framerate.

  • Preserve the cadence when loading a swf into another

    Is there a way to preserve the cadence of a swf file when loading into another swf that plays at a higher rate. I load some flash ads that work for most to around 12-15 frames per second in a portfolio site that revolves at approximately 40 frames per second. All my ads play too fast. The link is:

    www.dg8tal.com/portfolioidea.html

    Thank you!

    You can use the code below the dotted line to play (and stop) the movieclip to frame m to n fram to any framerate (fps) allows to manage the host computer:

  • slow Cadence: I restart Apple TV daily

    For about a week now, the pace is so slow that the motion on screen stutters.  It happens everywhere, but is especially constant on YouTube and Netflix.

    I restart the Apple TV, and the problem goes away... until the next day.

    Someone knows what's going on, or even better, how to fix?

    Thank you!

    If you have no power to Bike ATV, you could try that.

    With the new 4 ATV, we can force quites individual applications, which seems to help them, indicating that the problem is inside the application, your ATV can not do this, then you may be stuck with reboot periodically. Have you recently updated the software?

  • Satellite L305D-S5892 - cadence is low and stuck YouTube videos

    Well, here's the deal I had some problems with my Satellite l305d-s5892 so I ended up using a copy of Windows Vista to format so I can use it again.

    But I play world of warcraft and the frame rate is much lower now so im guessing that there is some configurations or missing something. I mean that I can get the drivers and all on the site and I installed video drivers. IK, that I did not kwnnowo if there are other relevant drivers that I have to put or something and something thng tube you videos get momentary stuck every now and then but the continuous sound to go and then the videos just make up whit the sound.

    If anyone can help or knows a beginner's guide, so I can properly set up my lap top, I really aprciate ir thank you

    You have a Satellite L305D-S5892 then your have a chipset AMD and ATI graphics card.
    The chipset driver is part of the graphics driver you n t need to reinstall separately

  • How to import a model spectrum of Cadence in microwave Office?

    I have a model of spectrum for the active device I want to use the MWO for simulation of HB.  Can I import it?


Maybe you are looking for

  • can you collect cool previews as an add-on anytime soon?

    I used add on previews cool cooliris for many years and find it off this morning. Is there anyway I can get that add on back?

  • What is CoreCapture, why it crashes, how can I fix it?

    What is CoreCapture, why it crashes and how can I solve this problem? Folder is located in: System > Library > newspapers > CrashReporter > CoreCapture This is what I get in the Console: 2016-08 / 08 10:20:05.816 AM corecaptured [479]: CCProfileMonit

  • Yoga 13 wifi is extremely poor

    Note: there is another thread on this marked "Resolved" when he really wasn't. The original poster he marked this way, but the vast majority of people in that thread are always problems with no response from Lenovo REPS I hope that this new thread wi

  • The restore Cd Acer is the CD of "Backup"?

    I'm trying to restore my Extensa 4420 to the original. I have not bought the CD got Acer $$ a number of years, but now they have no interest in helping because my laptop is out of warranty. After using the Sys CD #1 instructions require "backup" - CD

  • Repeated TARGET_MDL_TOO_SMALL crashes bsod

    Hello I hope you can give me some help to find out what is causing this BSOD. I transferred my mini dump and msinfo files here. Please let me know if you need anything that anyone else. Thank you! https://1drv.Ms/f/s! Ah0wNI41LUmpzjU9KBvSKU8ZswAe