lunable to download kb2656353

Similar Questions

• installation failed several times to KB2656353 and KB2656370 security update. I downloaded all the patches and recommended tools. What should I do?

  Received phone call from someone who identified himself as a member of the Technical Support of the Windows team.  Says my calculation had sent messages back saying that I had a virus.  Was skeptical and didn't know how to check if it was legitimate then toldl him I would take care of him. Ran Norton Security and Windows security and both reported that my system do not have a virus.  Noticed that Windows update was not the last 2 weeks so I tried to run the updates.  I get a sayingi error message that FAILURE of installing up-to-date security for KB2656353 and KB2656370.  I downloaded all the patches and recommended tools. What should I do?

  Have you tried the recommendations in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-install-update-kb2656353-i-am-receiving/f3c353ca-4d85-44e6-a5f0-eb9a5330d7c8

  and this article:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-updates-continue-to-fail-with-codes-0x66a/5e05e18e-E2E5-400e-B114-75f155571b5c

• Maintains a security update (KB2656353) do not download

  original title: security update (KB2656353) KEEPS FAILING to DOWNLOAD
   
  The patch that continues not to down load is:
  Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353)
  How can I solve this?

  Tried the fix - it, no good tool.  Since the update has to do with the .NET Framework 1.1 SP1, I redownloaded this program.  Rebooted and went to MS. updates  Followed KB2656353 downloading again... he installed complete.  WohLah.  Hope this works for others too.

  Thank you

• Cannot download and install KB2656353

  How can I get this software to install?  Get this message every day, but no indication of how to go beyond this:

  Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353)

  Thank you!

  Hi again,

  Tried method 2 and that or the fact that I downloaded and installed KB867460 (.NET 1.1 SP1) solved my problem.  After a reboot, run only Windows Update again and the software loading finally.

  Thanks for your help!

  MR. V

• I can't download updates KB2657424, KB2656353, KB2656352, and they cannot be found on your website. Thank you.

  I can't download updates KB2657424, KB2656353, KB2656352, and they cannot be found on your website. Thank you.

  If you have problems with. NETFramework is a tool that you can use here http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx that performs a repair of the whole. NETFramework facilities and is not so "destructive" by doing this, you may be able to fix what has damaged the. Install NetFramework.

• KB2656353 security update has been downloaded every time that I have stop my computer and when I start upward again in recent days.

  This download is there yet.  It seems to be the same, this is the first time that I wrote the code at the end.  I still download, allowing to update at the stop.  It is not usually this many Microsoft Downloads.

  Full text of update: a security update for MS .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353)

  I have also had problems with my computer.  Had a friend for the holidays watch, which quarantined to a single file.  The only thing we could figure out was that my McAfee program was running whenever I clicked or moved in my email accounts and he used all of the memory 2 g.  So I switched browsers Firefox, McAfee was not doing this, then it was fixed.  After about 5 days at home, McAfee was running with Firefox and slow things down.  I have McAfee online and they are gone, removed a bunch of files placed in quarantine and not something in the software.  It helped, but I still have questions that I had before my friend watched during the holiday season.  (If my printer is left on my computer is hampering trying to close or start.)  I never had this problem at the last place I've lived, but also had a direct line to the internet modem, when I am on a wireless adapter.  And I had problems with the computer in my old USB ports corrupt flash drives.  (* sigh * I just turn my printer power on and off when I need and turn off wireless on this subject because of this problem.)

  I also had a warning of 'virtual memory is low' and also known as the end, and it is displayed when the computer is in standby or when I left it for a few minutes.  Again, I have 2G of RAM, but all these strange things began to happen as soon as I started running internet from a wireless key, not that I don't have the choice in my current setting.

  Thanks for your help!

  Angela

  Hello

  I suggest to perform the clean boot and then try to install the updates and check.

  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.

• Can not download updates, KB2656370and KB2656353

  Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656370)
  Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353)

  Hi Mike ZSKI,.

  have you uninstalled all .net frameworks and reinstalled them?
  If this is not the case, try to use the .net Cleanup tool here:
  http://support.Microsoft.com/kb/976982
  This link helped me to solve this kind of problem just follow all the steps.
  Please come back if you need assistance
  Thank you
  Makoi

• KB2656353 security update cannot install (error 0 x 80070643)

  original title: KB2656353 security update cannot install

  I was on the Windows Update site and downloaded the updates for my computer.  The same update: a security update for the Microsoft.NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353) does not install after several attempts.  Error 0 x 80070643 and error Code: 0 x 643.  I don't know that much about computers so I would be so grateful your help or Fix It solution.   Thank you.    C. Stewart

  See: How to get help and support for this security update
  http://support.Microsoft.com/kb/2416447

• Windows XP updates failed to install with error 0 x 663. KB2656353, KB2656370

  Downloaded from KB2656370 of KB2656353, but the installation failed, got the error code 0 x 663. Tried the suggestions to resolve them, failed again.  Any ideas?  Windows XP Media Center Edition, Version 2002, SP3

  Hello

  1. what troubleshooting steps have you performed to correct the problem?

  2. you have any application installed on the computer security?

  3 did you last modified the software on the computer?

  Method 1:

  I suggest you to disable any application security and check.

  Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Try to install the updates, it does not engage in the method 2:

  Method 2:

  I suggest you run the FIXIT from the link below and.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 3:

  I also suggest you to follow the steps mentioned in the link and check.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Hope this helps and let us know if you need more support.

• Impossible to update KB2656353 & 2656370 KB

  Whenever I connect I asked windows update

  Despite many efforts, I am unable to update KB2656353 and 2656370 KB

  Advised failed every time

  Similar experiences / solutions?

  Hi pauliecUX,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• kb2656353, & kb2656370 is not found in Add/Remove

  Hello

  I have windows xp home edition SP3.
  Two downloaded Windows automatic update .net Framework 1.1 updates. I clicked on the yellow icon to install, but I got a message saying 'some updates may not be installed'.
   
  However, history of update on the automatic Windows Update site indicates that the installation of kb2656353 & kb2656370 succeeded 3 times in one day! I don't see kb2656353 & kb2656370 anywhere in Control Panel > Add/Remove.
  What is happening with this?
  Thanks in advance for any help.

  Hi, Tango,

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the steps and check if that helps.

  (a) go to start and click RUN.

  (b) type appwiz.cpl, and then click OK.

  (c) in the window add / remove programs, select the show updates option and check whether the update is installed or not.

  Method 2: You can also check out the link and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

• (KB2656353) security update fails to install

  Keep doing the same update of security for the Microsoft.net Framework 1.1 SP1 on Windows XP, Windows Vista, Windows Server 2008 x 86 (KB2656353)...

  Rough for awhile, I tried the Auto Fix - It, has not solved the problem... Continue to get the same update on marketing and closed, fails to install. I tried several times to install, does not go through, goes on to say that it is downloaded and ready to install. Can't get rid of the installation icon in the system tray? WHAT to do?

  Hello

  Try to repair the .NET Framework.

  Click on Start > control Panle > add / remove program find offshore Microsoft .NET , click Uninstall/change , and fix it. Then try to install the updates.

  If again get the error follow the steps below

  1 - Download .NET Framework cleanup tool http://blogs.msdn.com/cfs-file.ashx/__key/CommunityServer-Components-PostAttachments/00-08-90-44-93/dotnetfx_5F00_cleanup_5F00_tool.zip and unzip it.

  2. After you have retrieved double click it to open it

  3. in product cleaning select all versions , and then click clean now

  4 - restart your PC after cleaning ends.

  5. download and install the suite

  Microsoft .NET Framework 3.5 Service Pack 1

  Microsoft .NET Framework 1.1 Service Pack 1

  Microsoft .NET Framework Version 1.1 redistributable package

  Restart your PC and run Windows Update.

• I received the following updates several times and they always fail to install, they are KB949074, KB2656353 and KB2656370. How can I fix it?

  Receive automatic updates and there are three that will not be installed?   They are KB949074, KB2656353 and KB2656370.   I needs Blons them or should I solve the problem?

  Hi sgmillersr,

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• KB2656353 install fails with error 0 x 643

  Dear Microsoft support community,

  (a) I have Windows XP Professional SP3.  I haven't used this computer
  in almost a year, so the first thing I did was to hang the
  computer, connect to the Internet and run Microsoft update.
  There were 78 updates and 75 of them were installed successfully.
  (b) when I tried to install KB2656353, the installation failed with error
  0 x 643.
  (c) Googling turned up to http://support.microsoft.com/kb/976982 .
  I tried the Microsoft Fix it 50123, but which did not help.
  (d) I repaired then the .NET 4 Client Setup.  No joy.
  (e) I ran the auditor of .NET tool to
     http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx

  And he noted "the check is successful" for
     
  .NET 1.1 SP1
  .NET 2.0 SP2
  .NET 3.0 SP2
  .NET 3.5 SP1
  .NET 4 client
  .NET 4 full

  (f) I have concluded that uninstall and then reinstall the whole .NET
  framework was not claimed for now, since it does not seem
  as indicated in KB 976982 corrupted.

  (g) I checked the registry for .NET 1.1 hotfixes listed issues
  in http://blogs.msdn.com/b/astebner/archive/2004/11/23/268934.aspx
  in the "Info 9002..." section, but I have not found any.

  (h) I downloaded the update in a separate file,
  NDP1.1sp1 - KB2656353 - X 86 .exe, to http://download.microsoft.com,.
  and tried to run as a standalone program, but it stops almost
  immediately.  By redirecting the logging to a local file, I find
  the update has not been installed, but I do not know how to interpret
  the log file, which is much too large to be able to post it here in its entirety.

  How can I get this update to install?

  Related post on the same question:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-install-update-kb2656353/744caf0c-4450-40DE-BB8F-cf4ca2ee565d

• Windows Update keeps failing (2008 x 86 KB2656353)

  Original title: 2008 x 86 KB265353

  My windows guard update neglect (2008 x 86 KB2656353) and I'm unable to download Skype. The message is that it can not find the server.

  Hi DawnettaSoares,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: I suggest you to consult the article in the Microsoft Knowledge Base and check.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798/en-us

  Step 2: Then install the stand-alone package containing the updates. You can download the stand-alone version of the link mentioned with the number below.

  http://www.Microsoft.com/downloads and check if the problem is resolved.

  Let us know if that helps.