LV RTE 2013 SP1 not found f2Patch

Similar Questions

• CVI RTE 2013 (without service pack) is supported on Windows XP SP2?

  Please note the links below and the description of the operating systems supported for the CVI RTE 2013 and CVI RTE 2013 SP1.  CVI RTE 2013 description is "XP 32-bit" and the description for the CVI RTE 2013 SP1 is "XP (SP3)".  Does this mean that the ICB RTE 2013 (without service pack) is supported on all 32-bit versions of XP including XP (without service pack), XP SP1 and XP SP2?  Thank you.

  http://www.NI.com/download/labwindowscvi-run-time-engine-2013/4105/en/

  LabWindows/CVI Run - Time Engine 2013 - R2 Windows 8/7/Vista/XP 32-bit/Server 2008 R2 64-bit/Server 2003 32-bit

  http://www.NI.com/download/labwindowscvi-run-time-engine-2013-SP1/4561/en/

  LabWindows/CVI Run - Time Engine 2013 SP1 - 8/7/Vista/XP (SP3) to Windows 32-bit/Server 2008 R2 64-bit/Server 2003 R2 32 bit

  Hello, Dan

  According to the Readme, LabWindows/CVI 2010 SP1 supports Windows XP SP2 (32 bit). Thanks for that bring to our attention.

  Best regards,

• Backward compatible? Can I write software in 2015 SP1 and expect it to work well in 2013 SP1? What are the features will not work?

  I need to set up some labview on my current computer software and run it on another computer in another country in a month. I was told that the computer I will eventually run from abroad Labiew 2013 SP1. I don't have a Labview on my computer today and thought I would setup the same SP1 version ito 2013 compatibility. However, it seems that this is not an option. When I go to download products my options are 2012, 2012 SP1, SP1 for 2014, 2015 and 2015 SP1.

  So what's the best move here? Can I install 2015 SP1 and wait that everything works ok when I go abroad? I guess not. Why 2013 SP1 is not an option for me? Should I see if guys abroad can upgrade to the latest version? What happens if they can't?

  Thank you

  Trevor

  As others said, the best option is to get the same version. If for some reason you cannot really, I suggest you get an older version, because then you can write the code in a newer version and backsave, there are at least two issues that may bite you if you are not well aware of how they work:

  1. If you have used the new features, they will not work in the old code. What you get in fact depends on the specific feature you are using.
  2. When you backsave, I'm sure that LV is a hierarchy save, which means, if you have screws located in the external files that are not vi.lib, it will create copies and you might have a more difficult time sorting out the dependencies.

  This occurs if you are using an older version, because the most recent version will simply open it.

• I reinstalled XP. I have SP1 is not found, but did install SP2 & SP3. I just located SP1 and it wouldn't install because SP2 & SP3 has been installed.

  I reinstalled XP. I have SP1 is not found, but did install SP2 & SP3. I just located SP1 and it wouldn't install because 2 & 3 have been installed. Can I uninstall SP2 & Sp3 then download sp1 and install. What started this was my to tinstall net3.5 sp1 updates. He couldn't because there was no SP1 and I don't have any further updates until that this update is installed. Help

  Thank you

  Q: what about this one? -Online http://answers.microsoft.com/en-us/ie/forum/ie8-windows_xp/i-cannot-open-websites-using-internet-explorer-8/6f1e53c8-3522-4a78-8e4a-336863deb7fd
  A: the answers I received has not solved the problem. That's why I reinstaled XP

  1. but you started this thread on 06 September, almost a week after you 'reinstalled XP' and then installed SP2 & SP3. Please explain?

  KB2393802 was missing, I tried to download and said that it was not available.

  2. How have you tried to download & where was she available (for example, when you ran a further manual verification of updates today)?

  3. what 'net3.5 sp1' update you referring (e.g. KB951847)?

  4 WEBCAST: What is the full name of your Norton application (for example, Norton AntiVirus;) Norton Security Suite) and when (exact date preference) your current subscription expire?

  5 When you finished the clean install of Windows XP, etc., 01 September, how long was the computer connected to the internet until you have installed the Norton application?

  6 WEBCAST: Is Firefox, Chrome or any other alternative browser installed?

  7. have you backups of ANY changes Registry Mechanic has made to your computer since you've done the clean install of Windows XP on 01 September? [1]

  ==========================================================
  [1] injudicious use of registry cleaners can play a role here. TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• Windows 7 SP1 will not install. Element is not found, the error not found (0 x 80070490) 490

  I'm running Windows 7 64.  I tried to use Windows Update and received this message: element not found, not found error (0 x 80070490).  Code 490 Windows Update encountered an unknown error.  I tried all of the troubleshooting, difficulty, burning the .iso (which worked great on my laptop running Win 7 32) and I tried a repair, nothing works.  Any ideas or should I just not worry about installing SP1?

  Steve

  All,

  If all the above steps give no results, the next logical step is to perform an InPlace upgrade.

  An upgrade on the spot is the final solution before you have to reinstall the operating system.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  How to perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2, follow these steps:

  1. close all running applications.

  2. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.

  3. in the settings window, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exe in the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  1. click on connect to get the latest updates for installation (recommended).

  2. type the CD key if you are prompted to do so.

  3. Select the operating system in the "Windows Installer" page you want to update or Inplace.

  4. click Yes to accept the Microsoft software license agreement.

  5. on the which type of installation you want? of the screen, click upgrade.

  6. when the installation is complete, restart your computer.

  Please see: How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  See you soon

• CVI 2013 SP1 - function calls repeated with pointer on a variable array parameter causes a shift of the index

  I have some functions will be pointers as parameter and CVI 2012 SP1, they work as before without problems but with CVI 2013 SP1 they are now incorrect.

  Here the description of what is happening - I found a cure, but a duty adopt the old code and I think it's clear that nobody don't "captures" all lines in a 'big old code' which are affected (maybe):

  I have functions

  'function_XYZ(int *p_paraArr) '.

  with 'p_paraArr' as pointers on a table (int).

  Suppose I have another function

  "fct_TOP (void)".

  where is a local array variable which is inizialized by

  "int TheArray [25] = {0};

  and inside of this "TOP"-function-body I call a function ".

  "function_XYZ (TheArray).

  There are no complains of the compiler (CVI 2012 or 2013) and the code works (but the CVI 2013 only once!).

  But if I put 'fct_TOP' loop I have a lag in the "TheArray' -memory.  (The loop surrounds the function "TOP"! "")

  This means that the result "TheArray" obtained from "function_XYZ (TheArray)" starts at index '1' not on the index '0' - as the first time that the function "function_XYZ (TheArray)" was performed. ".

  The solution is:

  I only replaced

  "function_XYZ (TheArray)" (<1>)

  by

  "function_XYZ (&(TheArray[0]))" (<2>)

  overall the program now works every time (in the whole loop)-the first time (in the loop).

  In the second version (<2>) everything is necessary to "work well":

  The '&' and parentheses "(...)", which contains the element that may be designated by the '& '.

  And I hope that you believe me: I've tested several times, it was only "little" change that solved the problem.

  So it seems that the ICB 2013 (SP1) is a kind of internal offset index by a repeated execution of the

  "function_XYZ (TheArray).

  but I don't know how or why but I see in debug mode by observing the expected against the values in the table received!

  At the first time the (implicit) internal index of 'TheArray' is '0', but the following times (during the execution of the loop) the internal index passes to '1' (seen in the debugger because that all the expected values were shiftet like that!).

  So there's an explicit index in the table ("function_XYZ (&(TheArray[0]))") necessary to make the first time of this clear code execution.

  There are some good improvements in 2013 CVI (SP1) and I like this environment more than the 2012 version - but:

  There are other "changes" also, in the compiler (or linker...?) that are more rigid than "in ancient times.

  The problem of this kind of error is always the 'old code '!

  It is expected of such behavior.

  The compiler/linker do not complain (a complaint would be good!) writing but he made this mistake (in a loop).

  By the way: my 'compilation Options' are set to 'Extended' (without change in the "..." ("- button - Options) and that all of the boxes, except the" OpenMP_support "-box are checked!"» So I think that I put the very rigid compiler - maybe there are some «...» ' - button - settings to get rid of this problem, but I have not found them/it.

  My request:

  -Check the stiffer compiler by the need of an explicit index

  - or switch to the 'old' behavior with "function_XYZ (TheArray)" always refers to implicit index '0' of the element "TheArray". "."

  Thank you for your messages, comments and suggestions.

  -As I wrote before - maybe it's the style of programming or error"self made"... maybe...
  .. But if I replace 'function_XYZ (TheArray)' by "function_XYZ (&(TheArray[0]))" and
  then it works... Why so and not, if bothe the same? ...

  But as long as I do not post sample code, nobody is going to accept - I accept it. So consider this post more as an allusion to the fact that of the LW/CVI 2012-2013 LW/CVI more changed than just the LW - GUI or certain features: the compiler changed its 'way to'... or almost.

  For this problem, I think that I will use the solution 'use no implicit and explicit pointers'.
  Who should be a good idea taking into account
      http://forums.NI.com/T5/LabWindows-CVI/fatal-run-time-error-dereference-of-out-of-bounds-pointer/TD-...

  mybe also only caused by wrong code... who knows... but for me it is a sufficient reason to act as I suggest above.

  Best regards,
  F.

• Why magnets of all return sites suddenly message "file not found".

  I use Firefox 26.0 on Windows 7. Until yesterday, by clicking on an icon of the magnet has triggered a response by utorrent. Today, December 25, 2013, doing the same thing in the same way on any magnet on any site icon gives the message "file not found" instead of doing what he did before. No changes to Firefox. Use of IE, get the desired result, so it seems not to be a problem of utorrent. What do you recommend?

  Hello

  I found this old article, see if that helps you:
  https://support.Mozilla.org/PT-BR/questions/930045

• Since v25 when I try to log in my account of Merrill Lynch, I get not found user IDS. Works well iE and Chrome

  When I try to access my account, as I recover a message not found user ID. I have 1) deleted all cookies, cache, history etc... (2) run as Administrator 3) renamed cookies-sprite 4) restarted

  I am currently using Windows 7 Home Premium SP1, Firefox 26

  I was going to take a look at the form, but I was surprised to find that there are many pages of different connection: http://www.ml.com/index.asp?id=7695_14227_14228.

  When I enter a username of random test here: https://www.mymerrill.com/ml/home.aspx?site=mymerrill

  I get the expected error: "user not found. Click here to retrieve your user code. "The link here goes to ml.com instead of being on the same site.

  If I'm looking for the thisisatest username then I get the page to enter a password, which is also on ml.com. So there is an interaction between the areas here which may be covered by restrictions on third party cookies or external scripts.

• Mac Pro end of 2013 will not launch apps. most mouse clicks are delayed to the point of making it unusable.

  Hello community,

  I have a problem with my Mac Pro end 2013. I bought it in August of 2014. It has always seemed to be a little weird, but I attributed this to the usual first generation bugs and not-so-stellar OSXs from the end. When it was available, I installed the latest update of El Capitan, 10.11.5,, and it seemed that Apple had finally deceived. Since the update, I enjoyed the use of my MP as much as other Macs I've owned over the years (a Performa, G3, G4, G5, several iMac, MacBook, MacBook Pro and Mac Mini - 14 in all).

  Yes, computer on my MP was nearlly nirvana, that is, until a few days ago. It started when my mouse became very unresponsive and I just thought he needed a couple of new batteries. I put fresh packaging as engergizers in, but it did not help. The slider was slow and jerky, and sometimes it is completely frozen. I paired a new mouse, also with new batteries, the Member and experienced the same thing. Basically, the mouse was unusable. The slider control would come and go at random. I do not think that to restart faster, (which surprises me, because, in the past, I had to do quite often to operate properly). But I restart, and it seemed to clear up the problem at the moment. This strange mouse behavior happened at least a dozen times since the beginning, but generally, it did not last long and lightens without rebooting. I noticed that often happens during Time Machine backups are in progress, or when another CPU-intense activity is happening.

  Unfortunately, it seems that this problem of mouse was a harbinger of things to come. Today, I started the MP of his sleep and clicked on Mail. Nothing happened. It confused me and left me puzzled for a while. I clicked on my browser, Google Chrome, and even once, nothing happened. I thought I should go in my applications folder and try to launch Mail from there to see if that would work. All the time that I did, I got a message window that says: "Cannot open the application"Mail.app"because it may be damaged or incomplete." Immediately after you read this, another window message, just like this one open and said the same thing for Google Chrome - "Unable to open," etc. Icons for Mail and Google Chrome in the doc are now passed to the application icon generic Apple, (the white sheet with the 'A' in the lower corner). Each application I click on since waking from sleep today gives me the same result. Nothing opens the application icon in the dock or the original file in the applications folder. Another very strange thing, it's clicking on a file opens the file in the application it is native. Strange, Yes, but I was able to open Google Chrome, clicking on a saved URL, and I open TextEdit by clicking on a saved TextEdit document. But the application does not open by clicking on its icon. I thought it was very unusual.

  With this weird behavior also come a slowdown in response time of the mouse and keyboard. It is so slow that it makes the work on the machine, for all practical purposes, impossible. It takes 20 or 30 seconds to register a click. But, adding to the quirkiness of everything that happens, once an application is open, like TextEdit, the mouse and the app seem to work almost as if nothing was when working within the App on the other hand, the responses to the mouse by trying to use the finder or open a file from the desktop are very slow. A note on this: when I first the computer woke up today and ran into problems, I tried to open the applications folder and when it finally opened, there is no list of applications. In near-panic mode, I immediately tried the folder my documents to see if my personal files were intact, but no they had also disappeared, or so it appeared. I discovered later, having left the files open on my desk for an hour or two, that files showed later upward. It was a great relief. But the icons on several applications from the applications folder had changed to the generic Apple icon, for some reason any. I rebooted into Recovery Mode, but he wasn't able to do anything there except performing first aid on the hard drive, which showed everything be ok. I didn't restore from a backup at this stage. I had another option to try everything first. Re-boot after that nothing changed.

  The option I mentioned was to try Disk Warrior on it. I ran the latest version and rebuilt on the hard drive, checked the material, and all that makes the software, I forgot. It took about 45 minutes to run. The result was that it showed some things which have been corrected, probably 8 or 10 items, any rang critics. I said a short prayer and restarted. Nothing has changed. Everything that I described before was exactly the same.

  Exasperated, I came here to see if it was what I could glean conversations that could help me. I have not found something really substantial to help me solve the problem, unfortunately. What I found was that I'm certainly not the only person who has experienced problems of 2013 end MP of catastrophic proportions. It is obvious that there is a serious problem with this Mac.

  For those who have had smooth sailing with them, be very happy. If I was. The question came out of the blue. Yesterday, I would have been there with you praise. I hope your luck tends and you never have to experience this level of frustration with a product. I mention this because some seem to dismiss the issue as flukey. But I must say, in all honesty, anyone denying the MP has a problem either whistling through the graveyard or they are so pro-Mac that they are not prepared to allow even a small flaw in the Apple armor. They are good people, but they are in denial. I know how easy it is to refuse to acknowledge the existence of even a slight stain on the first brand hand. I have fought wars of Mac - PC at the time where we didn't know what a Mac - but almost every designer in the country. We labeled Mac users quietly the balls also odd, unconventional and offbeat. But we knew we had the best product. We knew that when the rubber meets the road, in particular regarding graphics, we would spank a PC each time. The years 90, and even the first part of the century was a time when serious computer users aligned on one side of the road or the other, Mac or PC. A lot of animosity arose between the two camps, especially on the side of the Mac, because we were the underdogs, rather despised by the majority. We felt the need constantly to get our message to the number overwhelming dominate the PC users. It follows a sort of tacit animosity. And it became a proposal for a war similar to many Mac users, myself included. For people who lived in that time and have subsequently become more and more immersed in all things Mac, the war is raging on. This is the meaning behind my description of those who are "so pro-Mac". Again, it is easy to understand why this mentality still exists. It was not easy for us guys good back in the day. But it is now time for rational people watch mentality 'til-death-us-part and face the facts, which also means recognition of all prejudice deeply seated, illogical. This member is not good. There is a real possibility that it could be much worse than not well. Time will tell.

  On the side of those who are unwilling to admit there are problems, of course, the argument will be, given all the members sold, he's going to be a dud or two, it's just human nature to be less - than perfect. I accept that. For my money, however, after having lived what I have with my Congressman and to hear the facts given on this site by several owners of the MP - and the absurdity of the incredible problems they have known - that any rational thinker must know at least the idea that means that we deal with a lot more here than the occasional, inevitable dud.

  The bottom line is, my problems are not isolated. It is clear that Apple has a product that fails to a very rare rhythm of the brand. Once again, I have owned for a decade of Mac, all shapes and sizes, but I've never had anything that happens to one of them that comes close to this type of failure. How disappointing it is to me, who has worn the coat for Apple products for nearly 30 years.

  I doubt if there is something that everyone in the team of technical advisors here at the Community Board of Apple can do to help me with this problem. I'm not somehow devaluing at your service for Mac users. I certainly welcome any help you can offer. I know you have helped countless others to find solutions to the problems. But it's a little different for you now with this model of MP. Your best efforts seem to be a bit anemic on this topic. And it's not your fault. Apple isn't talking, then you are here on an island of yours, grasp at straws to try to help. I congratulate you on that, but nothing I've read has shed significant light on this which seems to be a mess of real, first Apple class - currently without a viable solution.

  Yet once again, I welcome any suggestions and thank you in advance to address even. I will definitely check here in the coming days to see if he has the answers.

  In my view, the prudent thing for me to do now is to make an appointment at my nearest store from Apple, an hour and a half and let them begin to set. I'm not too optimistic about a full success to resolve the issue during the first visit, based on the experiences of other contributors. And I rejoice in water and the lift back repeatedly to do things, as seems to be the rule rather than the exception. But in this regard, fortunately, I'm retired and now do occasional projects at low pressure. It's great to not have the MP to put food on the table like I did for many years using my trusty ol ' G5. I don't know what I would if I still ran my business full-time and depends on this MP. Small businesses rely on their equipment to work. The major failures, such as this MP seems to display with regularity can quickly put a small company out of business. This failure is not a walk in the park for me, but I really feel for those who invested heavily and who depend on every day, only to have this mucking things up, i.e., when it is not in the repair shop.

  Finally, I write my thoughts here to express my disappointment in commiseration with other owners of MP end 2013. These are users who were as delighted as I when Apple eventually replaced the G5 with this elegant, state-of-the-art piece of equipment. Like many others, I jumped directly into the train without reservation, and I paid their price without any reluctance. Plunking down to $4 k for it, adding on 27 "display Apple and then having to buy an external drive now makes me a feel a bit embarrassed, at best and, at worst, as an easy mark. The result is, I wasn't expecting this new MP to throw myself into a sort of computer euphoria, I expected just to work as it was announced. The only thing I added on and I thank God, I did it, was AppleCare. Before this saga is over, Apple will probably want that I had refused it.

  I have not read all what you posted but I think a clean installation, even to an external and test simply install would probably tell a different story. I think you did an installation "backup" probably from a backup of TC. I also think that Legacy Applications from a backup OS x and third-party would be not beneficial. Try it, see what improves.

• TECRA R850 - not found wireless network controller driver

  Hello

  I reinstalled my computer, since then it does not recognize a wireless or network device
  here - after part of the result of the Toshiba Diagnostics tool
  Device Manager indicates that:
  "The drivers for this device are not installed. (Code 28)
  There is no driver selected for the item or a set of device information.
  To find a driver for this device, click Update driver.
  "

  However I can't find the driver, after update of Windows updates, etc.

  Help, please!

  Thank you
  lavver

  Date of 2013/03/15 22:55:35

  [Information on PC]
  Model name TECRA R850
  Part number PT524E-005014BT
  Serial number 4B021792H
  Version of the OS Microsoft Windows 7 Professional 6.1.7600
  Version of the BIOS Version 3.60
  CPU Intel Core i5 - 2410M 2.30 GHz CPU
  Memory8192MB physical RAM
  Hard drive Capacity304, 562, 036, 736 [bytes] 283.646 [GB]
  Hard drive space free Capacity126, 578, 688, 000 [bytes] 117.886 [GB]
  Video version Intel(r) HD Graphics Family = 8.15.10.2291
  Resolution1366 x 768 Pixels screen
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 6.0.1.6271
  Display Audio Intel (r) version = 6.14.0.3074
  Network version Intel Gigabit Network Connection = 12.2.45.0 82579V = E8:9 D MAC address: 87:EA:3 C: 21
  HUAWEI Mobile Connect - 3G version of the network card = 6, 0, 1, 279 MAC address = 00:1E:10:1F:82:A7
  Modem HUAWEI Mobile Connect - 3 G Modem version = 2.0.6.706
  Internet Explorer9.0.8112.16421
  IDE Device Hitachi HTS723232A7A364
  CARPET * A DVD-RAM UJ8A2AS = 1.00 FW version

  [Diagnostics results]
  CPU TEST DOES PASS
  MEMORY TEST DID PASS
  Enhanced Host Controller - 1C2D)
  Enhanced Host Controller - 1 26)

  i.LINK TEST IS NOT FOUND

  Your Tecra a card ATHEROS 802.11 (B/G/N) WB195-HMC w / BT WLAN inside and all the latest drivers you can find on the Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/

  Check it out please.

  This is card with BT, then before you install install driver WLAN BT filter. You can find it on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

• HP 15-ac025TX (M9V00PA): network controller &amp; USB controller driver not found and wifi not working not

  Hello I bought HP 15-ac025TX (M9V00PA) computer laptop computer laptop.  I installed all the drivers from the HP site, here is the link

  http://support.HP.com/in-en/drivers/selfservice/HP-15-notebook-PC-series/7771404/model/8326084#Z7_30...

  but still driver network controller not found also wifi works do not I installed blutooth drivers too. I use Windows 7 sp1 (32-bit)

  For network controller device ID is PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01

  Secondly, univeral serial bus controller driver (usb) not found

  I installed all the drivers on link also updated windows, but still no solution

  the usb controller hardware ID is

  PCI\ VEN_8086&DEV_9CB1@SUBSYS_80C2103C&REV_03

  and finally, I am unable to download the graphics driver AMD/Intel switchable high definition (HD). the download link works not

  KINDLY SOLVE THE PROBLEM

  Thank you

  Update:

  While the pilot I know work is not made yet, I did some detective work and explored some other links from HP broadcom WiFi card driver files, and I found one that should work for you.

  He says that it is for HP desktop PC, they put the exact same form factor of the card wireless to a desktop PC in a laptop.

  I see not why this driver would not work, because the configuration file contains the same hardware ID you have posted.  Here's a partial copy and paste of the setup information file driver, and you can see the hardware ID you have posted is supported by this driver.

  x 86-Win7
  ;
  [BROADCOM. NTx86.6.1]
  % BCM430N_DeviceDesc % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C
  % BCM430N_DeviceDesc % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_22D3103C
  % BCM430N_DeviceDesc_HPY % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_2232103C
  % BCM430N_DeviceDesc_HPY % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_22D4103C
  % BCM430N_DeviceDesc_HPY % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_149257_1

• string not found in language resource files

  I run my sequence and at the end of the test, I've got the popup next instead of failure message (see StringNotFound.jpg)

  I checked my TestStand 2013\Components\Language\English folder and it seems that I have all the files (EngineString.ini...)

  The PC I use has been installed with an installation program that I made. My Installer installs editor TestStand, Labview DURATION and module and my sequences with their libraries. I had a problem with my sequence, as a path of the module was bad after I installed it. So, in my Installer, I put the option "Include without transformation point or dependencies" only for its sequence. This solved my problem with the path, but perhaps it causes this not found chain problem?

  Does anyone have an idea?

  Concerning

  Laurent

  I stumbled upon this same question and ModelStrings.ini was not packed in my deployment (although all other files in... \English were.)  To resolve this, you can either copy ModelStrings.ini directly to the location on your computer that is deployed or if you use the deployment utility select the... \English folder and its contents by having them in your workspace referenced.

• LabWindows 2013 does not

  I'm using Labwindows 2013 SP1 on Windows 7

  This morning I made a few changes to the code for my project when I clicked on the icon "Debug Project", project generation succeeded, then just Labwindows hang up, saying "not responding". I killed the project and labwindows revived and tried again and it did the same thing. I backed all the changes I did today what it was yesterday, when I did not have this problem and tried again and it's always hanging with "not responding".

  I went to labwindows 2013 about 4 months ago and I have never had this problem until today and now it won't go away.

  I'm completely at the stop. Can someone help me solve this problem?

  Thank you

  John W.

  Hi, John.

  The newspaper that you sent seems to indicate that you have more than 750 watch expressions in your current workspace. This blockage you encounter is probably the result of LabWindows/CVI, trying to update all watch expressions.

  I have reproduced a substantial blockage by adding only 700 watch, all for a single int value expressions in my application.

  To resolve this problem, you can delete the watch expressions. If you can't access their interactive way to the LabWindows/CVI environment, you can remove them from the bottom of your SCF file. You can do it in a text editor.

  I would like to know if it works for you.

  Thank you

• Range of custom error codes and error rings/Labview 2013 SP1

  Hello

  for the error message personalized codes there are these assigned ranges:
  -8999-by-8000
  5000 to 9999
  500 000 to 599 999

  If I create an "error ring" in Labview 2013 SP1, then I am able to choose predefined error codes or I can put in some custom error codes. Curious as I was I chose 'Labview' in the menu drop down and looked up some error codes. I noticed that there are some affected error codes that are of the order of custom error codes (see attachment) of 538170 to 538193.

  Is this a bug or feature? What is the impact if I defined error codes customized with identical, already existing error codes?

  Kind regards

  Thomas

  Thomas,

  It seems you have installed ModBus library. As it is an additional package, picking "custom error codes" is not bad even if the library fits in LV...

  Norbert

• CVI 2013 does not create an exe

  Hi all!

  While the 2013 ICB works fine on my desktop computer, on my laptop it does not compile build any exe file. When to use Build > rebuild it just tells me

  "Cannot copy c:\...\Debug\...exe to c:\...exe. File not found.

  CVI 2012 on the same machine works very well.

  Someone at - it an idea?

  Kind regards

  Thomas

  Just a hunch that some paths may be wrong on your laptop. . PRJ open it in an editor and look at the different path variables, see if anything points to absolute directories that do not exist.