lvwutil32 version too early on down to the last version of LabVIEW?

Hi all

I want to order the Platinum windows with some of the useful vis stored inside the lvwutil32 lib. However when I tried to open the screw inside the library, an error message saying that the vi version (4.0) is still too early to be converted into my latest version of LabVIEW (8.5.1).

Is anyway to convert the usable by my course LabVIEW vi? It is a great shame from the Readme file that accompanies the lvwutil32, it seems that there are a lot of useful screws that I would find very useful for my projects.

Hope someone could provide help on this. Thank you!

Here is both.

Don't see much sense in the lvterm.vi. It could be written from scratch in a short time and with the structure of the event, be a better program.

Tags: NI Software

Similar Questions

  • multicolumn ListBox scroll down to the last line - with AutoSize on

    Hello world:

    I have a question about scroll to the last row of a listbox multicolumn with a small twist: automatic resizing line Heght is on.

    I checked this point - listbox multicolumn - scroll down to the last element - but if one or several lines are automatically resized to have more than one line, then the actual number of visible lines differs from the numrows and the calculation ends up incorrect.

    Has anyone found how to do this?  If there is a property only to find the heght of a line in lines...

    Thank you!

    I developed what I think it's a solution to the test.  It is based on adding the line heights, in pixels, of the last row back, until it is greater or equal at the height of the content area of Listbox MC, also in pixels.  Add-on for the upper left row to display because the last line displayed can be split.  Thus, there is always an empty line at the bottom (which is the only way to ensure that the last message is completely visible).  Because of the way that LabVIEW scrolls lined with several lines, there may be several blank lines on the bottom.

  • Stabilizing warp CS6 scales down to the last image

    Hey,.

    Whenever I have add the Warp in Premiere Pro CS6 stabilizer, it auto-echelles of sequences, with the exception of the last image. It changes just to 100% once again, so I'll have to cut. Others affected by this problem, or of the ways to solve it?

    Thanks in advance.

    Edit: turns out it's probably not the stabilizer of the chain, but the position. When I set the position, the same thing happens, and as the stabilizer changes the position, the position will probably cause the problem. Key frames is disabled.

    Come discover something new, which makes it even more strange.

    The last shot of the clip using the effects on the other. I have classified the next clip completely red, just to check. And the last frame of the previous clip flushed as well. In addition, when a clip is not stabilized, it will say: 'click Anylize', with the exception of the last image.

    It seems to me that, instead of problems with the last image, it is probably the first frame of the next clip which is missing. So what is happening: the previous clip using the effects applied to the next item. I never came across something like this.

    Edit

    RESOLVED:

    Somehow, on each unique clip, the creation of keyframes for opacity is enabled. But there is no keyframes, and it is always 100%. When I change the value and go up 100%, the missing frame returns.

  • Resize the event too early to scrollRect on the button full screen

    1. turn on full screen.

    2. receive the resize event.

    3 check display scrollRect.

    4 ScrollRect is old value from before resizing (size of the components is OK though).

    Use the code below.

    Steps to follow:

    1. run the code

    2. click on the box to switch to full screen

    3 Note that the size of the viewport is the value of before resizing in full screen

    4. press ESC to exit full screen

    5 Note that this window is actually larger than the scroll (it's always the old value of mode full-screen)

    Are there workarounds or hacks (or I mess up something)?

    ========================================================================

    Code to demonstrate:

    ========================================================================

    <? XML version = "1.0" encoding = "utf-8"? >
    " < = xmlns:fx s:Application ' http://ns.Adobe.com/MXML/2009 "
    xmlns:s = "library://ns.adobe.com/flex/spark".
    xmlns:MX = "library://ns.adobe.com/flex/mx".
    Click = "{stage.displayState = StageDisplayState.FULL_SCREEN} '"
    >
    < fx:Script >
    <! [CDATA]
    Import mx.events.FlexEvent;
    Import mx.events.ResizeEvent;

    protected function scroller1_resizeHandler(event:ResizeEvent):void
    {
    trace("myScroller.Height:"+myScroller.Height);
    trace("myScroller.Viewport.Height:"+myScroller.Viewport.Height);
    }

    []] >
    < / fx:Script >
    < s:Scroller id = "myScroller" top = "10" low = "10" left = "10" right = "10" resize = "scroller1_resizeHandler (event)" >
    < s:Group id = "MyGroup" clipAndEnableScrolling = "true" >
    < s:Label backgroundColor = 'red' width = "5000" height = "5000" / >
    < / s:Group >
    < / s:Scroller >
    < / s:Application >

    ========================================================================

    When I tried to move to the Group Manager in your example above I thought it worked as you expect.  Can you post the trace output to do this?

  • How to go down to the nearest multiple of Labview

    I am trying round my data down to a given multiple. Is it possible to do in Labview? I use Student Edition 2009 if it's relevant.

    Thanks in advance.

  • Version of VI is still too early to convert the last version of LabView

    I get this error when deploying a simple loop VI I try to troubleshoot the symptom of not being able to connect to the remote control.

    I have LabView 2014 SP1 version 14.0.1 installed and that's what I used to build the VI (see attachment).  The version of the software on the cDAQ 9139 I work with ranges from 14.0.1 for real-time 14.2.0 for DAQmx 14.5.0 or Web Application Server.  (See attachment).

    How can we still too early to convert to the current version, if the software LabView 2014 is installed on the cDAQ has VI created in LabView 2014?

    Again, the symptom that I see is "Server does not support remote façade panels" when you try to access the façade of a web browser.   I confirmed by working with our it Department IS not blocking all communication.  The Blue Coat standard software is not installed on the computer, I'm trying to access the Panel of (I also tried to connect to the remote control of my computer at home that has no software IS on it with the same results).  Anything related to the NC was added as exceptions to the firewall.  I have tried a large number of configurations of ports and worked through the troubleshooting list, you can find on NI.com when you search for this error.  There must be something tiny miss me.

    In addition, nobody knows what the two links in the HTML file that is generated when you use the Web publishing tool are supposed to do?  One is a FTP link and the other is a link to the plugins page.

    I took two step forward on this issue.  First of all, I reformatted the hard drive of the cDAQ and reinstalled only most of the software as before, I had been all install available on the host the cDAQ.  This seems to have fixed the error 'version of VI is too early to convert the last version of LabView.  Secondly, I discovered an error in my understanding of the port settings.

    In the configuration of the cDAQ web screen, the web application server is listed as port 8080, by default I believe.

    In the properties cDAQ in the Project Explorer window, the web server has been changed on port 80 to eliminate the need to put in the port number to access the remote control.

    I'm sure it's an assumption on my part, and oblivion, but I thought that those who have the same parameter with just the ability to be set from two different places.

    When I try to access the remote control via the web browser uses the web application server port listed in the views of web configuration, I received the error "server does not support the remote panels.  When I try to access the remote control via the web browser using the port listed in the properties of the CDAQ project for remote control Server Explorer, I could see and interact with the remote control.

    This probably also makes perfect sense now that I understand they serve two different goals, but if you define two ports at the same address, you will get the error "server does not support the remote panels.  Interesting that it always provides the correct html page.

    I am sure it was my problem throughout linked to the issue of the remote control.  I was probably just lucky when I put the Panel remote port server during the initial setup and my luck ran out when I upgraded to LabView 2014.

    Hope this helps people who may have the same assumptions I made.

  • I'm having a problem with the update of the last security update. What can I do?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: problem getting my pc to download the latest security update

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Floyd,

    It helps those answering questions if you provide:

    What version of windows (32-bit or 64-bit) and service pack level.

    you use what browser (exact version).

    What application or antivirus security suite is installed and your current subscription?

    What third-party firewall

    What anti-malware software can be installed.

    What updates you trying to install?
    What error do you get everything when trying to install updates?

    In addition to the information required:

    How to view the log of update windows

    Click Start, and then click Run.

    in the Open box, type%windir%\windowsupdate.log

    and then click ok.

    Scroll down to the last entries find the error codes associated with the last attempt to download/install.

    start at the bottom and work your way up a section that indicates an ERROR, WARNING or FATAL.

    If the appropriate copy and paste the codes of errors in this thread if someone may be able to help you.

    on the other hand, you can find the error code and other suggestions by searching the forum.

    Also check the windows file called Ko folder * .log (* = number of update KB896688 ie) and send the contents of the update has failed.

    This may even provide clues as to why the update failed.

    How to read the windowsupdate.log file:

    http://support.Microsoft.com/?kbid=902093>

  • The default home page is not loaded at startup. The last page visited is in place. Default V32.0.3 in the options is set correctly.

    Tools-> Options-> general-> Firefox starts-> show my homepage--> homepage--> http://www.bing.com

    It comes down to the last page visited.

    You to include information about your system, it shows that you have a user.js file. This is a file of optional parameters with Firefox checks when it starts and is used to override the settings from your previous session. Sometimes, the command to restore the previous session is in this file. You can it track down and remove it by following the steps described in this article: How to fix preferences that will not save.

    A little luck?

  • Windows 7 crashes when stopped at the last moment on the blue screen

    I know that the new card USB 3.0 installed is cursing the fault. I need USB 3.0 and it is the third card, I installed, but all with the same fault; When I closed windows 7, at the last moment, it hangs on the blue screen, some, but not all the time that this model of plate washing appears. Please can you help me? I have Windows, new driver search, but all drivers are OK. It seems to me like a time-out; as Windows has no time to finish closing. But I'm not experience enough if this is correct, and what to do if this is correct.

    Sorry, it is not the blue screen of death. It's normal when blue screen windows 7 is going down at the last moment it stops crash and sometimes she as well has this Board band appearance.

    When I remove the USB card, the computer works and closing down as usual. This is certainly the card USB curse the problem.

    Windows 7 accepts the driver USB works fine, no update available.

    Computer:

    Windows 7 Home Premium, 32-bit

    CPU: AMD Athlon (fm) 64 x 2 Dual Core Processor 3800 + 2000 MHz frequency

    Motherboard: ASUS A8N-E

    RAM: 4 GB

    WS

    You will probably need to communicate with the computer of the Mfr and the developer of the card USB 3.0 to see whether there is a newer (patch or beta) driver.

    Without a kind of diary, there is not a lot, we can help you.  The driver for USB 3.0 must be dated June 13, 2009 or newer.

    Alternatively, you can try to reinstall the USB driver in compatibility mode,

    If you want we can take a look at your Event Viewer logs

    Please provide us with your administrative Event Viewer logs by following these steps:

    Click on Start Menu
    Type eventvwr in the find programs and files (do not hit enter)
    Click with the right button on eventvwr.exe and click Run as administrator
    Expand custom views
    Click the administrative events
    Right-click Administrative events
    Record all events in custom view as...
    Save them to a folder where you will remember which folder and save it as Errors.evtx
    Go where you saved Errors.evtx
    Make a right click Errors.evtx-> send to compressed (zipped) folder of->
    Download the .zip to skydrive or a file sharing service file and link to it in your next post

  • After installing Windows 7, the system does not work properly and must use the last known good configuration

    I installed the upgrade of Windows 7 a few months ago, my system was Vista 64 for everything I need, it was the upgrade, when I turn on my PC, my Start menu is not and none of my icons, to fix what I have to keep turning off my pc and turn on again by pressing F8 then go down to the last known configuration, how to fix this without having to shut down my PC and press F8 so that it starts normally all the time

    Download malwarebytes and run a virus scan to make sure that your computer is virus-free.

  • DeskJet 3520 prints paper usually ok but food takes hold of the sheets of labels Avery too early

    I have a Deskjet 3520 eAIO (wireless). Print labels Avery fine on other printers, but when I try to print them on the 3520, it seems to start to give the sheet of labels too early which means printing from more down the page (about 1/2 "") as it should. My 8 + yr old Canon print all types of avery labels with no problem, but he just finally bit the dust and I'm stuck.

    Hi panavygirl,

    I understand that you have a problem with printing labels Avery to your Deskjet 3520 printer. I'll try my best to help you solve this problem. Could you please tell me the model number of your printer and the operating system that you are running on your computer?

    HP Deskjet 3520 e-all-in-one and e-all-in-one printer, HP Deskjet Ink Advantage 3520 product specifications the table below shows the types of paper supported. This printer doesn't support label paper. That said when you choose the type of paper in the advance printing preferences menu, try to choose a paper to heavier weight for the printing of labels.

    The following table contains a list of sizes and types of paper supported.
  • HP LaserJet P1102W: HP LaserJet P1102w prints 1/2 inch too far down on the page

    When I print with that printer using Word, it starts about a half inch of print down on the page.

    I tried to reset to factory settings, but it does not always work on me.

    Any help would be appreciated.

    Hi @2poodles2 ,.

    I see by your post that when you print from Word, printing is printing too far to the bottom of the page. I'd love to help you.

    Try and print a self-test on the printer hardware to see if it is a hardware or software problem. Select the method two.

    HP LaserJet Pro P1102 and P1106/P1108 Printer Series - printing a Configuration Page.

    You have this impression of question from other applications?

    If this isn't the case, it may be a margin setting in Word applications. Please check the margin settings.

    Make sure that the appropriate settings are defined in the properties of the printer and the application you are printing from.
    On the file menu in the software, click on print.
    Select the product, and then click Properties or preferences.
    Click the paper/quality tab.
    Check the Type of paper size, paper Source, paper, to ensure that they are correct.

    Try to print again.

    If you still have problems, copy the Word document and paste it into another program, such as Notepad, to see if you have the same results.

    What version of Word are you using?

    How is the printer connected? (USB, Ethernet, WiFi)

    If you appreciate my efforts, please click on the button below the thumbs up.

    Thank you. I look forward to hear from you.

  • Why is this a version clone (read-only) open when I go down to the bottom for a sub - VI

    I just installed a trial version of LabView 2010. But I noticed that when I create a program of LV and descend to the bottom of a Subvi (is Subvi is also created by me, not a reference to a library), it opens a version only read of the Subvi, which I'm going to. The title of the window shows also the Subvi is down is a clone version, unmodifiable. Why? That's why an evaluation version?

    If you use a project, try opening the sub - vi by the project and not by the appellant vi.

    If you use not a project, it opens the traditional way: file > open > navigate to the subvi and select it.

    You can also (and simpler) try ctrl-M on the open clone to make it the master.

    To check if it is re-entering, on the file menu, select properties of VI > execution

    Look if there is a check mark in the reentrant run box.

    It does not matter if you only have an open reentrant vi.  If you have opened if the appellant vi, it will be a clone.  Boring, Yes.

  • Urgent! How to open one of the last update of the project in an earlier version first?

    How to open one of the last update of the project in an earlier version first?


    I can't open a project that was saved in the latest version of first. My version is earlier than that of the project that have been saved

    Hello

    So far, backward compatibility is not available in Premiere Pro.

    Export your project as a FCPXML of the new version of first and try to import in the previous version.

    Kind regards

    Ilyes Singh

  • I give up!  Cannot down load the free trial version, I can buy it well!

    I give up!  Cannot down load the free trial version, I can buy it well!

    I tried not once, twice, but 15 times down loading free trial without success.

    He continues to show a sign of error and pointing me to a range of solutions that does not apply to the notice of my mistake.


    I can pay for the contract of the year, but after the traps by buying Capture One Pro 8 and not getting is not the free track, I want to make sure I like the system of the organization.

    My concern is a standard, if the beginning is screwed up, it means that the middle and the end will also be questions.

    I have an Adobe ID account and I received an email from 'Welcome to creative cloud. '

    I checked my apps and I installed the Adobe Application Manager.

    Any ideas how to get the free trial version?
    I am of course either something wrong or simply do not understand the process and is not make for a good start.

    Screen Shot 2016-01-02 at 3.35.39 PM.png

    I did a search of the Internet and found that Safari can be a problem, I used Chrome and it worked.
    Not sure if I'm an isolated case, but it may be necessary to put a notice of the opportunity than Safari for some reason any is perhaps not able to install the free trial version.
    I even tried to remove the firewall and that did not help.

    Problem solved, but not without a little pain

Maybe you are looking for

  • Equium L10: How to use Toshiba Recovery CD to install the OS

    Sorry in advance if this might be a stupid question, but I have not re-installed the operating system for years and don't know how to do. I think I need to reinstall cause i've got my laptop for almost 2 years and it became too slow with lots of erro

  • Re: Satellite A300D PSAK0C - drivers XP need

    Need drivers in XP. The site Web does not support my Satellite phone 300 d psak0c? Why?I need drivers for "kontroler Zarzadzania systemem magistrail" spirits "regulator". Where can we find? The Web is not this model and this cdrivers.Any support it?

  • Error-no Toner

    I replaced the toner, but always the message: error - no. Toner

  • How do you put some emails Hotmail Live on a CD?

    I have some very important emails, private (long letters from an old friend). I want to store on a CD - completely 'out' from my email account. and "gone" from anywhere in my pc and laptop. So two questions for the forum, but the CD one is most impor

  • Windows Media Player 11, DVD video, not big enough in fullscreen

    During playback of movies DVD with WMP 11 and in full screen, the video does not stretch to the edge of the screen. I have a flat screen monitor set to 1600 x 900. When I entered the mode full screen the video becomes a bit larger, but does not fill