M.2 Slot for a connection Y510p and trackpad

Similar Questions

• Is it possible to add the second graphics card for this model Y510p?

  I've been doing mixed responses from customer service chat lenovo so I'm posting my question here. Recently, I bought this laptop. It comes with a single graphics card. I heard this model has ultrabay and you add another graphics card. My question is - is it true that you can add a second graphics card in this system by using ultrabay? Please let me know. I'm confused if SLI and ultrabay means the same thing. If this is the case, then this system is not sli. I appreciate your help.

  http://shop.Lenovo.com/us/en/laptops/LENOVO/y-series/y510p/?SB=:000001 C 9: 00011E0A:

  Also, don't forget to find the extra $20 or sometimes $50 discount code for the Lenovo y510p and apply it to the Fund. The time I bought my laptop I used the code USPY5168320, you will find a similar code if this does not work.

• Please help to configure the router for internet connection 871W!

  Hello world!

  I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.

  I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:

  ISP IP: 76.114.54.255

  SUBNET: 255.255.248.0

  GATEWAY: 76.114.48.1

  DHCP: 69.252.97.4

  DNS: 75.75.75.75

  75.75.76.76

  If you can, please help! Thank you!

  Hi david,

  Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation

  you could ask your ISP to perform a reset/clear MAC add and try again?

  also, kindly post lastest "show run".

  Edit: just to see you've updated your screenshot. could you add command under 4

  Mac-add 0001.4af9.8b83

• My internet connection is lost at home after a few minutes. I re - turn on the wifi disabled, ten and it works again for a few minutes and then repeats. It works fine everywhere else?

  Relatively new MacBook OSX El Cap 11.4

  My internet connection is lost at home after a few minutes. I stop the wifi, then turn it back on and it works again for a few minutes and then repeats. It works fine everywhere else?

  Please see recommended settings of WiFi routers and access Apple points.

  Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.

  Some third party routers have advanced that you may need to change the settings:

  The encryption algorithm must be AES.

  The group key interval must be 3200.

  I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.

• Why firefox started assuming that I ask a connection secure for all Web sites and disabled scripting and styling on those I can access?

  Fortunately, I was a user of firefox for six months. After downloading the beta version, several "bad" things took place. Most web applications page (for example, using firefox, google.com) result in the message that I asked a secure connection and the site does not have a valid certificate. When I add this site to websites of exceptions, the loading of the page but only the HTML - no script styles none - not like the old days. In addition, after uninstalling (more clear all the personal data in the process) and to reinstall version 18, I get the same behavior more in the one case, I tried my ins journal for the wsj.comsubscriber site hang-likely problems of scripts. Furthermore, I could not access to this and previous pages of help while on firefox - this query uses the ie9 bad access.

  To see ESET:

  • ESET setup-> Advanced Configuration-> expand web and email-> SSL shaft
  • SSL protocol: do not scan SSL protocol

  Some firewalls monitor secure connections (https) and send their own certificate instead of the certificate of the Web site.

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page: "I understand the risks".

  Let Firefox recover the certificate: "Add Exception"-> "get certificate".

  • Click on the "view..." button. "and inspect the certificate and the Coachman, who is the sender.

  You can see more details like the intermediate certificates that are used in the details pane.

• NB100 supplied with Bluetooth and the slot for sim card

  I wonder what model come with bluetooth and the slot for sim card,.

  The NB100? Have a look at the brochures on the Toshiba site.

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Hi everyone, this is my first post, also help on the post would be appreciated.

  I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Thanks in advance

  Newbie

  The only way to install an ipad app is through the app store.  PC or Mac software does not run on the ipad.  Search in the contacts link at the bottom right of this page.  Give apple a call.

  I guess is the icon for pages in icloud for storing documents pages.  At the same time, apple had a cloud based pages.  Not sure what happened to her.

  R

• Is it possible to access the USB ports and a slot for card SDX?

  Is it possible to access the USB ports and a slot for SDX card at the back of the iMac?

  Rotate the iMac autour to see ports.

• comes to connect in iCloud for the first time and to synchronize my calendars etc I noticed it all disappeared.  How can I restore them?

  comes to connect in iCloud for the first time and to synchronize my calendars etc I noticed it all disappeared.  How can I restore them?

  They run iCloud.com? You have them on a computer?

• After the removal of a virus, I can't connect to the internet, is looking for an IP address, and the RPC server is unavailable, said

  My netbook has a virus so I did a scan and remove infected files and a program which the virus attached itself to.  Now, I can not connect to the internet.  He is looking for an IP address, and he also says that the RPC server is unavailable.  Any ideas?  Help

  Hello

  Step 1: Start your computer in safe mode, and then try to start the Remote Procedure Call (RPC) services and start the computer in a clean boot
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click Remote Procedure Call services.
  c. change the startup type to automatic, and then click Start.
  d. click ok to apply the changes.

  Reference: http://windows.microsoft.com/en-US/windows7/what-is-safe-mode

• When I try to connect to my router wirelessly from my laptop and the room, he asks for my network key and I don't know what it is.

  my brother used to all our computer equipment set up and he died last year. Well when I moved and tried to get into my new place it will not allow me without a network/wpa key. I know that I am trying to connect to my router and not my neighbors because when I unplug it it's the only name that disappears from the list of wireless networks. How can I know what is the network key or even set up a new? I am a bit technologically with faculties weakened to get detailed instructions on how to help me would be appreciated, but any help would be great.

  I'm sorry for your loss. Since we do not know how your brother to set up the router, it would be better to start again just to make sure that your wireless network is secure. Reset the default router. This is usually done with the wired router (on) by pressing a small button on the back or the bottom of the router, now the button for about 30 seconds and then let go. You can find the manual on the router mftr's Web site. your router if you need it.

  Once you have reset the router to default, set up correctly:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

  Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

  You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.

• How do I know if I use NAT and PAT for internet connections

  Hello

  I have a PIX 525 6.3 and I have a stupid question... I do a show xlate and I see that I'm using PAT to internet connections... The old man FW says that we come to the internet. What command can I use to confirm this... because it looks like that to me, we use PAT and NAT not for internet connections. I'm you Cisco router and switch engineer but I now have the responsibility of PIX and I want to make sure that everything is correct.

  Thank you

  No question is a STUPID question!

  Issuing the cmd: sho xlate detail and also sho conn detail and it will show you what you are looking for.

  Hope this helps

  Jay

• Exchange server and Surface RT, can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Hello

  Our company uses an Exchange Server for email, contacts and calendar.

  Can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Kind regards

  Matej

  You must install the SSL certificate before connect you to the Regional service, the easiest way is to go to "desktop" IE10 open, go to the exchange server web access page, click on the notification of "certificate error" red and view / install the store "certificate authorities roots of trust." Then, make sure that your surface RT complies with the minimum requirements of security then connect to the exchange via the mail application server.