m/b 6463-5bu and 7658-18u

Similar Questions

• Does not start after the reload of the operating system

  OK, this is my story of boredom.  I have a Lenovo T61 Type 6463-5BU, S/N L3-xxxxx.  The hard drive died a few weeks ago, and since then, I have received a replacement drive under warranty, that is the exact same drive type.  We had a backup image of the old system under Norton Ghost and managed to get the image to the new disk once it has been installed.  To do this, we used a utility called OS
  'BartPC '.

  Since then, I did pretty much everything I can think of to get the system to boot, including playing with the BIOS settings, setting the drive to 'boot' and 'active' with the help of a number of public services, including the good old "diskpart" and many others.  The reader will just not start.  A few times I could read the disc using Bart in command prompt mode, but I never managed to boot from it.

  The laptop has a finger print reader, but I was told several times that this has nothing to do with the problem.  So... before I cut off the finger of a person and drag in the player... What am I doing wrong here?

  Note of the moderator; s/n, under the direction of protection own members

  AGoodSolutionideas can save I hope as your image.

  For later use, take a look at this document from Lenovo on the use of Ghost; Partition does not start after being restored with Norton Ghost - NetVista / ThinkCentre / ThinkPad...

  I know it says 'prior to 2004 systems', but it is still topical.

• T61 power problems

  Good afternoon everyone,

  I have a Lenovo T61 Series laptop; Type of 7658-18U. Recently, when I try to turn it on, the message appears for a few seconds, then the cutting unit. I removed the hard drive thinking that may be the source of the problem, however, which only did not help. I'm not sure what can be the issue; I can try reseating the RAM modules later, someone has any ideas as to what could cause this problem? Any help would be appreciated. Thank you.

  Make sure you have a good adapter, and remove all the drives and accessories is a good thing to try, but if the problem persists, you may have a bad card system.

  Regarding the ram, I would try it certainly, but ram is generally good or bad, I saw not a bad sodimm cause a machine post for a few seconds then turns off.

  Good luck

• Middleton BIOS questions

  Hey all, 1 after Middleton BIOS updated what is best possible CPU upgrade, currently have T61, 7658-18U, t7500 clocked, where is also best site to download the BIOS upgrade? Thank you

  AtliJarl wrote:

  Ah, Yes, that we forgot, but what is really viable to put the X 9000 in a T61/R61 due to his superior

  TDP? Then the standard cooling with her screed?

  A standard fan of T61p it cools very well. I have built about a dozen T601 FrankenPads using this CPU.

• IBM ThinkPad Lenovo T60 (8744 5BU) sound driver problem

  Hello

  I have problems with my Lenovo T60, I ran all the updates and installed all the drivers that I am able to install, with the exception of 1 pilot that I can't find anywhere. It is the sound driver, I checked everywhere on the internet for days and still not able to find the right driver that works. I called the help line IBM Lenovo and all they can do is tell me the Web site to go because there is no guarantee that more than a dozen times already visited. If there is anyone here who has a Lenovo T60 (8744 5BU) laptop, please help me here, or if someone is able to help that would be great. Questions please ask, I can give more information. Thank you.

  You need more that just run the downloaded exe file.  Run this file (77a224ww.exe) just to extract the necessary files and puts them in a directory on your hard drive.  It does really settle anything.

  Did you read the Readme, particularly the "installation instructions"?  Have you noticed that you need to uninstall any previous drivers before installing the new?

  • Start the Device Manager (start > run > devmgmt.msc > OK)
  • Click on the + sign next to "audio, video and game controllers".
  • Is there an entry in Audio device to 'SoundMax Digital Integrated' Manager?
  • y at - it a caution icon beside the SoundMax element or any of the entries in "audio, video and game controllers"?
  • If there is a warning in the Device Manager, (a) what is the name of the device and (b) double click on the device and report, which is in 'State of the device' and 'use of the device.
  • What has happened just before that your sound has disappeared?

• T61 (7658 03U) upgrade to Windows 7 pro

  I have a (7658 03U) Chipset GM965 T71 with XP Pro SP3 installed. I need to upgrade to Windows 7 Pro. I have 3 GB of RAM, and it looks like I have a 32 bit version of XP is installed. How to move to Windows 7 pro and can install the 64 bit version of Windows 7 Pro? Ran Windows 7 Advisor, but it's not real clear on the drivers. Also thought I saw in this forum that my machine could run 8 GB of RAM. Please advise on how to migrate successfully to Windows 7 Pro. Thank you.

  Source? Try feebay.

  No matter what good (Hynix, Samsung, Micron, Elpida, Mushkin) brand name 200 pin laptop RAM is PC2-6400 or PC2-5300 (which are also known as DDR2 - 800 MHz and DDR2 - 667 MHz respectively).

  I have never use "no name" RAM in my ThinkPad and discourage the use of the offers 'ram value' from various manufacturers as well.

  Expect to pay $130 or more for a pair for a total of 8 GB DDR2.

• X 301 and F3507g

  Hi, I have a X 301, model 2774-18U, under XP/SP3. I bought F3507g Ericsson which is supposed to be compatible with X 301 after a few pages support and software readme.txts. However, after installing the card, F3507g does not appear in Device Manager, and there are no errors of any kind.

  Any suggestions?

  THX.

  It works! In the end, I thought I might miss an error message from the BIOS because of the Startup-> Boot-> Quick option, so I switched it to Diagnostics. No error message appeared, but when the OS booted, everything has been recognized. Back to the quick option didn't remove the device, so I guess that the system is not re-scan devices with this one.

• PC - Doctor and hard drive test results

  I have a T61 that wasn't logging past the "sign-in" screen, isn't exactly BSOD...

  I ran PC Doctor Diagnostics and my laptop 'failed' 3 tests...

  Hard drive: extended SMART self-test failed

  Hard drive: Surface scan test FAILED

  also SMBIOS: SMBIOS: FAILED test standards

  I went through the whole 'start BIOS configuration utility' and

  etc., etc., chose "hard drive" and press the F6 key to move to the first start position.

  etc. I even went through the process of ThinkVantage to return to "factory settings".

  but I still don't see the 3 tests above, when I take the test again in PC Doctor.

  My internal hard drive 'Fries '?

  Thanks for anyones on that help. I bought this model machine 7658-CTO in November 2007

  and the warranty is no longer in place.

  -Susan J.

  These 6 product recovery CDs are probably for XP, so if you use Vista, you must burn another series. Other that that, I don't know what else you would need. you're pretty much good to go.

  Regarding the quality of hard drive, it just depends some fail after a few months, some can last 5 to 7 years. Premature failure hdd are rare. But expensive if you don't get a hard drive replacement, then you are protected at least 2 to 3 years standard warranty.

• How to duplicate the artboard and move it over the original?

  Basically, I have a document open and want to duplicate its work plan and then move it to a new location (the X axis, the original 50pixels). Doesn't seem too hard, but I can't understand it. This is for CS5.

  var app.activeDocument = docRef;

  var abSrc = docRef.artboards [0];

  var abSrcX = abSrc.artboardRect [0];

  var abSrcY = abSrc.artboardRect [1];

  var abSrcW = abSrc.artboardRect [2];

  var abSrcH = abSrc.artboardRect [3];

  abSrcX = abSrcX + 1221;

  var abSrcRect = [abSrcY, abSrcW, abSrcX, abSrcH];

  dupAB var = docRef.artboards.add (abSrcRect);

  The above works a bit. Original work plan is 17 "x 11" (1224px x 792px) and when I put abSrcX to the foregoing 1221, extendscript throws an error PARM. During one of my sessions of trials and errors, I decided to see what was the document geometricBounds:

  $.writeln (docRef.geometricBounds); = 45-12, 1221.154296875,-780

  So now, I see a bit where I can't go more than 1221, but why can't I?

  I moved the artboard for everything at the top left of the document and I got the geometricBounds again and they were - 6754.5,7038.5,-6463.5, 6736.5, but still can not abSrcX anything about 1221.

  the error is "error Illustrator: 1246458189 ("PARM").

  I tried to understand this is what courses I can think, but nothings working. Any input or help would be GREATLY appreciated!

  EDIT:

  So I tried this for the hell of it:

  var abSrcX = 0;

  var abSrcY = 1224;

  var abSrcW = 1224;

  var abSrcH = 792; (for some reason any 792 translates into 6 "inside the Illustrator, so I put this 432 to make 11")

  var abSrcRect = [abSrcY, abSrcW, abSrcX, abSrcH];

  dupAB var = docRef.artboards.add (abSrcRect);

  and it adds a new work plan and move to X, Y, such that designated. Not exactly what I want, but narrowing down the issue.

  I'm trying

  var abSrcX = 1224;

  var abSrcY = 0;

  var abSrcW = 1224;

  var abSrcH = 792;

  var abSrcRect = [abSrcY, abSrcW, abSrcX, abSrcH];

  dupAB var = docRef.artboards.add (abSrcRect);

  and he throws that error PARM still once, then now there is really no sense!

  Edit2: I changed abSrcY to 10000 and now the height of the artboard is really long, which is insane even more... I don't have the (x, y, width, height) artboardRect down wrong?

  Edit3: If after one more google search, I found out what the problem is. artboardRect is HIGH, LOW, LEFT, RIGHT; and when I do:

  var abSrcX = 1368;

  var abSrcY = 0;

  var abSrcW = 2592;

  var abSrcH = - 792;

  var abSrcRect = [abSrcY, abSrcW, abSrcX, abSrcH];

  top down right and left;

  dupAB var = docRef.artboards.add (abSrcRect);

  This works. BUT I have no idea what the numbers are in relationship with. The center of the artboard? The document Centre? And if I run it again and change... oh dear.

  I think that I just thought of it.

  abSrcX is on the LEFT;

  abSrcY is HIGH;

  abSrcW is RIGHT;

  abSrcH is DOWN;

  Considering that if I add (1224 + 144) to abSrcX and abSrxW, it creates another work plan 2 "away from the previous 17" x 11 ". If I want to run again, I just have to add (1224 + 144) abSrcX and abSrxW again. Now to find a way to do it dynamically on the fly.

  I still like to hear comments on the question of whether this is good or bad, and how I can improve!

  @clrx01,.

  Why do you work with width and height work plan?

  IMHO you need what only once.

  Try something like this:

  // ArtboardCopy.jsx
  // http://forums.adobe.com/thread/1320239?tstart=0
  //        How to duplicate artboard and move it relative to original?
  // regards pixxxelschubser
  
  var docRef = app.activeDocument;
  //var abSrc = docRef.artboards[0];
  var abIdx = docRef.artboards.getActiveArtboardIndex ();
  var abSrc = docRef.artboards[abIdx];
  
  var moveX = 50;
  
  var abSrc_L = abSrc.artboardRect[0];
  var abSrc_T = abSrc.artboardRect[1];
  var abSrc_R = abSrc.artboardRect[2];
  var abSrc_B = abSrc.artboardRect[3];
  
  var next_ab_L = abSrc_R + moveX;
  var next_ab_T = abSrc_T;
  var next_ab_R = next_ab_L + (abSrc_R - abSrc_L) ;
  var next_ab_B = abSrc_B;
  
  //top left right bottom;
  
  var next_ab = docRef.artboards.add([next_ab_L, next_ab_T, next_ab_R, next_ab_B]);
  

  Have fun

• I have an ipod touch 128 GB... but I'm almost to reach its maximum.  I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with other copies

  I have an ipod touch 128 GB... but I'm almost to reach its maximum.

  I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with the other copies of the other.

  is this possible?

  What should I do?

  Matt

  When you get the new iPod, you can use iTunes on your computer to select and synchronize the music you want on it, in the same way that you synchronize your current iPod - your iTunes will recognize them as different devices and will remember your choice of synchronization for each, it will not (unless, for example, you restore the backup of your current on her iPod) put the same content on both.

  (I asked for your post be moved to the iPod Touch forum, where you have posted is the iPad forum use.)

• Why my notes sync between my Mac and iPhone?

  I have my MacBook Pro with Mac OS X 10.9.5 Mavericks and my iPhone is running iOS 10.0.1 and used to synchronize my notes! Is it because of the huge gap in operating systems? I SHOULD update my Mac to Mac OS 10.10 + for this problem? Thank you!

  In order to synchronize Notes between your Mac and iPhone, you must configure iCloud > http://www.apple.com/icloud/setup/

  But this requires macOS Sierra 10.12, the latest available version and the last iOS available for your iPhone.

• Photos, iCloud and OneDrive sync

  Hi all

  I have a question on how to better organize my photo library.

  For the moment, on my space OneDrive (mapped to a partition on my MacBook SSD), I have a folder called 'Images' containing just about all of my photos and organized by folders.

  Since my tech ecosystem is roughly marked Apple (iPhone, iPad and MacBook), I would use the power and versatility of the Photos and iCloud, so that everything remains in all of my devices and free space memory iPhone sync.

  Here's the question: I want to keep my pictures saved on OneDrive, then put the Photos on my Mac to view photos from this folder and use iCloud to share through my devices.

  -I see the same folder structure on iPhone and iPad a synchronization is complete?

  -More important, if I take a picture with my iPad, it will be placed not only on iCloud but also automatically added pictures on Mac which, in turn, puts it in the folder of photos on my OneDrive?

  -Finally, take pictures of my iDevices will store them in the film. If I move them into folders, photos will be mapped (copied to iCloud) on my other devices constantly (in the folder)?

  I would like to notice I'm not trying to avoid using iCloud premium space - I already have a subscription plan of 50 GB that I don't mind mounted. I just keep having just all my photos on OneDrive.

  Thank you in advance for any comments you may have!

  Paul

  The answer is simply not

  The photo library can not be stored on a basic system to pictures not work will have a referenced library, so you may not have a local library references photos on a disc - the photo library can be on a local drive connected directly to the Mac OS Extended format

  You can synchronize between the Mac and IOS devices using iCloud library that synchronizes the photos and the structure of the album/folder between devices

  When you import pictures you can export them to your OneDrive record and have a copy (not associate Photos somehow) on a disk

  You can not have the same physical pictures in Photos and on one disc - each must have its own copy of the Photo

  http://www.Apple.com/icloud/photos/

  LN

• Video and photos of backup

  Hello

  Anyone know the best way to back up photos and videos I took Iphone 6 my mom.

  I just got a new Iphone 6 more and have an icloud account, she has one more.  I don't know how to proceed.

  Thank you

  This article can help you:

  The backup of your iPhone, iPad and iPod touch - Apple Support

  You get free 5 GB of storage iCloud. If you want to save more than 5 GB, you buy more storage iCloud.

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• I need to change my security issues and said we do not have enough information to reset your

  I need to change my security but said Questions we have insufficient information to reset security of your apple ID questions.my is [email protected] I want to slove this problem please help me

  You should contact the account of Apple security team. To join, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (145174)