M - series of satellites does not start successfully

Hello

I have the following problem: all of a sudden (don't know why, nothing has changed) portable Satellite shows black white screen with all the following:

(Sorry, translated from German):

Windows does not started correctly... due to software or hardware change... If the error was due to stop pls choose last functional configuration...

But this does not, as all the other options (windows boot as normal starting point, in safe mode... has failed.

No idea what happenend!

Problem:

Actually moved to another country and you have forgotten or lost the recovery CD! already contacted Toshiba for the nine, but perhaps when even someone can help?

If all goes well it s not a malfunction of the equipment.
In any case, in the first stage, you should try to reinstall the OS to see if this problem is software or hardware related.

Tags: Toshiba

Similar Questions

  • A series of satellite does not start after the BIOS update

    After update bios with the downloaded utility my laptop does not start.
    Do you have this case covered by the warranty?

    I'm not sure if this would be covered by the warranty. You must contact the ASP in your country for details, but I assume that it s not covered.

    PS: Did you try this work around:
    -remove the battery, disconnect the adapter
    -wait ~ 40 min
    -connect the two devices again and try to turn on the laptop

  • C satellite does not start successfully - error at startup

    Turned on laptop today and received the following message:

    + Reboot and select proper boot device or insert boot media in selected boot device and press a key.

    Don't back up drive made when buying any body got a solution for this?
    Thank you
    Bev

    Hi Bev

    Can you please tell us what model of laptop do you have?

    Enter the BIOS and set it to default settings.
    HARD drive recognized and listed correctly in the BIOS settings?

    After this try to start Notepad, and then press F12. Choose the HARD drive as a boot device and press ENTER. What happens when you do this?

  • Windows does not start successfully - only in safe mode.

    I have a 3200 HP with XP Home Edition. Windows starts only in Mode safe when I download Service Pack 3. Is there a way to fix this without doing a complete restore of the system.  I've been running without SP3 because I knew of this issue. Recently, it has been downloaded and now Windows does not start successfully.  Only in Safe Mode.   When I discovered this problem, I was able to fix it, but can't remember if it was fixed without doing a complete restore of the system and starting over.

    Required reading:

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01457284

  • Satellite M30-107 does not start successfully after using recovery disk

    Hello

    I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
    I used the toshiba recovery disk, but after that the laptop is no longer support windows.

    When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
    When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

    Any help or advice would be much appreciated.

    Thank you
    JT

    Hello

    Sounds a little like the laptop does not start because of the problem of Windows software
    You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

    I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

    You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

    In this case we (you and me ;)) might know if this problem could be related to hardware or software.

    Good bye

  • I have a Toshiba Satellite A85 with XP Home Edition series. Windows does not start. At startup I get Toshiba logo then a black screenwith cursor upper left. Can I save it?

    Toshiba Satellite A85 Celeron with XP Home edition. Windows does not start. I have Toshiba logo screen, then it turns into a black screen with the upper left corner of the cursor. I have the recovery disk. Is it possible to record HD without re-formatting and losing all data?

    Thank you;

    Lobo77

    If you run the Toshiba recovery application, you will lose all your data.  As indicated in the warning, this application will restore the computer back to wherever it was when it was first delivered by the factory.

    Without other complementary diagnostic information, it is difficult to determine what is happening.  Pressing the key (do not hold) of F8 beginning immediately after that the sequence of power should bring you to the Advanced Boot Options menu.  Try again then press repeatedly the key rather than pressing on and now.

    The recovery CD Toshiba, you have probably does not allow a "repair installation".  Contact Toshiba to see if they will provide you with a suitable CD.

    Given the fact that you can get a useful place when you start with the Toshiba Recovery DVD, my guess is that the computer is OK but that the hard drive has failed - or maybe more likely - the startup information is damaged so that it does not start.  If you have access to a computer equipped with a burner, download and create a bootable Windows CD.

    There are a number of available bootable CD which include various recovery and diagnostic tools.  You'll have to do some research to find out how to use the tools.

    Ultimate Boot CD 4 Windows
    Ultimate Boot CD
    Hiren BootCD

    If you feel overwhelmed by the tools and I just want back the data, and then use the Toshiba Recovery DVD, make you a Knoppix CD and use this key to your data, preferably on a network connection.

    If all this sounds like too much for you - and there is no shame in admitting that--take the laptop for a good local computer repair shop (not a type BigBoxStoreUSA or rather GeekSquad) and ask them to check it out and make sure to recover your data before anything else.

  • Satellite A210-199 does not start successfully after the BIOS update

    Hello

    I've got Sat A210-199.
    Yesterday I updated the BIOS, and after that problems occurred:

    While restarting my computer does not start. When I enter the BIOS after a while, it shuts down.
    I guess all this because the temperature of the CPU:

    When I do nothing it is 77 C. I don't think it's normal: (.)
    Computer is very recent, so it's probably not dust inside. And it's so hot from the start, but after the new BIOS, something bad happens.

    Why this temp is so high?
    There is no any process background or something.
    Is this normal?
    And what about this new BIOS?

    To be honest, something like this should not happen. I really don't understand why this is happening. I have updated the BIOS on friends A200 and mine P200 and everything works fine. Here on this forum we can only speculate on this issue, but what you need exactly's professional opinion.

    This probably not help but install recovery image and check with the factory settings. Make sure you also on the lower side cooling fan is not blocked and the laptop can be cooled properly. If the problem persists, you should contact the nearest authorized maintainer and clarify this issue.

    Sorry, but I don't really know what you can do in this situation. I don't see any other way to solve this problem.

    Good luck!

  • Windows Pro L10 satellite did not start successfully

    I have a satellite pro L10 at home which was working fine yesterday.
    However, I'm going to turn in today and after the toshiba screen comes up I get a message on the screen saying "We apologize for the inconvinience, but windows did not start successfully" it gives then options such as safe mode, safe mode with network, last known configuration and start windows normally.

    No matter what is selected, I get the loading windows screen but then it goes black and nothing happens.
    Is there something I can do manually which will remedy this because stupidly

    I have recent work here that has not yet been saved!
    Thanks in advance

    Hello

    In my opinion, there is nothing to do because the operating system cannot start, even in SafeMode with network, last known configuration, etc.
    You need to reinstall the operating system

    If you want to backup the data on the HARD disk, you will need to access the HARD disk
    You can create a bootable CD WinPE which help you to gain access to the HARD drive

    Download WinPE image (use google) and create the bootable CD. You will need to burn the image to CD in order to get a bootable CD.
    Can boot from this CD, backup the data on the external HARD disk and then reinstall windows

  • Tecra M2 does not start successfully - zeroes appear all over the screen

    Help!

    My Tecra M2 does not start. After the toshiba logo, a series of zeros (0) appear all over the screen.

    -suspect it is caused by a virus, I formatted the HD (in another PC), but still the zeros appear
    -I might want to start in the DVD player, it seems to read the disc, but nothing happens, just a cursor flashing at the top left of the screen
    -J' I reset / replaced the RAM, but still no effect.
    -the power button works, lights and shuts the laptop but does not start.
    -CPU fan works
    -LED indicators of work are power, battery, dvd, wireless. Does not have HD LED light on.

    Any suggestions on how to solve this problem is greatly appreciated.
    See you soon!

    Hello

    I think we can exclude HARD disk failure because you are able to format it in another computer.
    As you suggest the RAM modules has been replaced but the problem persists
    So in my opinion, a motherboard problem would be possible

    But as you know, it of really difficult to say what might be exactly wrong
    I think that the technician should check the laptop then it would be possible to say what part is malfunctioning

    In any case, I think a motherboard might be affected

  • C50-A0113 satellite does not start in windows

    Hello.

    I have a toshiba satellite laptop C50-A0113 8 64-bit windows running.

    Ive had exactly two years a few days ago I restarted and then when it starts up, it stops at the screen "Toshiba leading innovation" and then he said: scanning and repair drive C, while on this screen it starts the process and then stops at 34%.

    It was two days ago now it just gets stuck on the "screen toshiba innovation leader" and then after a few minutes, it says preparation auto repair.

    Then he leaves the screen and goes to a screen black for a few minutes then flashes the blue screen written "your computer has encountered a problem" then restarts.

    I tried to create a bootable windows disc 8 in order to repair, but it does not start even in the usb port.
    I restart and press f12 to select the media to begin. It checks the media goes to the toshiba screen, then everything goes black for a few minutes until what it restarts.

    Can I please know what is the problem and how can I possibly fix it because the problem is clearly not my hard drive.

    I have removed and put into another laptop and it was fine

    Hello

    If you want to start Notepad using external media (such as a CD or USB flash memory key) you must disable the secure in the BIOS boot option.

    If you want to install Win 7, you must also pass the CSM mode UEFI Boot Mode.

    For me it of not quite clear if you created the recovery media (flash memory stick or disk)

    If you created one in the past, you could use this recovery media to put the laptop back to factory settings.

    In the case where this is not possible, some of the material (perhaps HDD) could be affected.

  • C870-19(r) satellite does not start with the new SSD

    Hello

    I will update the Toshiba Satellite C870 19(r) with a Pro 840 Samsung SSD, but it does not start.

    He said: not found system.

    Post edited by: joch333n

    None found system means that there is no system installed on the SSD drive...

    What you trying to do?
    You start from a disk in order to install the new system?

    In this case, you should disable startup secure in the BIOS.
    I also recommend moving from UEFI mode MSC!

  • My C50 - B Satellite does not start from the HARD drive

    Details of the machine: -.

    Model number: PSCMLA-03F07Q
    Serial number: XE343127P

    Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

    Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

    I reduced the possibilities to a fault of BIOS, reasons.

    System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

    The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

    1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

    Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

    Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

    I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

    See you soon,.

    Andrew.

    Hello

    From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
    HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

    What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

    Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

  • Windows 7 Enterprise does not start successfully after re - install

    I have just reinstalled Windows 7 Enterprise 32-bit with SP1 on my laptop HP 6715 b. (I use 32 bits for any software that I develop is always compatible 32-bit.)

    After you have re-installed however, it does not start correctly. What came with windows announce "Starting Windows", but the following animation never - start the four lights that turn and turn into the "Flying Windows Icon.  It then crashes right there - do nothing, no matter how long wait.

    If I can put the machine power off and re - start, we are at the "Windows Recovery screen" - because it has not started correctly the last time.  From there, I can choose to make a recovery and return to the last Point of good restoration, i.e. on a freshly installed system before the update of Windows, of course.

    If I select "Start Windows normally", it starts however. But it is not 'Normal '. For example I can't finish my "Windows Easy Transfer".  It says that it cannot connect to my domain name - even if I am connected to my area and have been using it to install other software.

    Or I can do a Windows Update "normally". The last time I tried, it is gone for hours without finding what be - so I left it overnight. In the morning he had apparently found nothing yet.  However when I turned off the machine and then turn it again - he told me there are 211 updates installed.  WHO has literally all day.

    I'm not happy to come back to the last good Restore Point.  I did once.  He has NOT fixed the problem.

    I also tried:

    • Using MSCONFIG to disable all the startup and Services, apart from Microsoft and Kaspersky - no improvement.
    • Do a CHKDSK - revealed nothing.
    • Start in Safe Mode, did change his behavior.  This time I do not have the Herald "Starting Windows".  But turn the machine works again once, return me the 'Windows Recovery screen '.

    Ideas anyone? I'm at my wits end.

    It's OK guys.  I have it sussed.

    He was objecting to the fact that I had my USB with my "Windows Easy Transfer" files on it, plugged during the initialization of the system.

    Also, I was wrong in my thinking on how "Windows Error Recovery".  I assumed that he would do all that it checks before proposing to do a system restore.  It is not, it suggests a restore of the system first.  If you say NO to that, then he makes his audit.

    What is finally here, is that I finally chose an option before he went into the system recovery.  Then, I waited until he was asked to do a system restore.  I said NO, so he went in it checks.  He went through his analysis and finally concluded it was some "system unspecified device" recently added.

    Well I haven't nothing added to my machine for years.  So, I was puzzled.  Then I thought ' well, I don't normally have my key USB is plugged. "  I wonder... ».  I therefore disconnected the USB drive and rebooted the machine.  The rest they say is history.

    Hope this sorry tale helps someone else.  It just cost me four days!

  • Satellute C660D-14 X does not start successfully after upgrading RAM

    I have a Toshiba Satellite C660D - 14 X and I brought the new machine RAM
    + Komputerbay 8 GB (2 x 4 GB) DDR3 SODIMM (204 PIN) 1333 Mhz PC3-10600 8 GB portable memory +.

    The RAM is recognized in the BIOS, but when I try to start windows I get a white line in the upper left corner of the screen.

    Any ideas how to fix?

    Notepad starts successfully by using the old modules?
    If Yes, then your problem are the new inserted memory modules.
    Eventually, they are not fully compatible or defective.

    I upgraded my laptop with the modules of RAM 8 GB some time ago and I used Kingston modules.
    They are more expensive but Kingston provide good quality modules and they work great.

    Less expensive modules can cause this kind of problem!

  • C50-A-19 t satellite does not start with the battery mounted

    OK, first post here.

    I see similar questions coming, but as they are never QUITE the same, I am that posing in a new thread.

    I left my Satellite from one day to the next (do not remember if I had put off, or he simply had 'gone to sleep', but it has been connected to the grid).

    When I got to reboot, I got a power light on, but screen blank (black). After reading a few similar complaints on the internet (via another laptop!), I tried to remove the battery and power from the grid.
    This worked well (I write him in this state right now).

    But whenever I put the battery and try again, it will fail in the same way.
    I tried this company "press and hold power for 30 seconds" without success (but I'm not 100% sure of the EXACT procedure actions sequence).

    I have a few questions:

    (1) I take the laptop away from my office - is there a problem with everything just works like this (i.e. of the grid, with no battery inserted) indefinitely?

    (2) in any case, I want to solve the problem.
    If the battery has run COMPLETELY flat, and that the laptop can not it lights but also operate normally?

    Alternatively, is probably that the battery has not experienced a catastrophic failure and simply needs to replace?
    If so, I'll just buy a. BUT...

    What I don't want to do, is to pay for a costly spare battery, to find that it was actually another factor at the origin of the problem, and I'm back to square one and out of Pocket!

    Any advice would be welcome.

    Thank you

    Mike

    Hello

    According to your assignment, in most cases, you use the laptop connected to the power adapter but no battery. Is this correct?

    First we need to know that if the AC adapter is plugged in, the laptop should work correctly with - and without inserting the battery.
    If you unplug the AC adapter, the laptop should automatically switch to battery power. In this case, it is important that the battery is pretty cool power to provide the power for the laptop.
    In case the battery is empty, the laptop will not light.

    I recommend to insert the battery plug the power adapter and charge the battery for a longer period of time.

    You should also check if the battery is recognized by the Windows system and the battery charge indicator (battery in the taskbar icon) shows the State of battery charge.

    In case the battery is fully charged and the laptop does not work using the battery power only, you should test the new battery.
    If new battery does not solve the problem, s for laptop hardware needs an audit.

Maybe you are looking for

  • Why can I not install Firefox using more - ms?

    I use to be able to install the downloaded versions of Mozilla Firefox using a simple switch on the command line. The turnout was - ms. It was working fine, I think, version 24.0. No version after that worked. Is there a reason? It is an "easy"? I sa

  • Star Wars Comics on iBooks

    How is it are not communicated to the only question of the any of the Comics Marvel Star Wars on iBook?  Only the largest volume of releases are out there. The descriptions are not useful as to what issues are in each comic and some volumes; for exam

  • Satellite A200 HDD player upgrade

    Hello My Satellite A200-1AB has a GB MK8037GSX hard drive.It is in working condition, but I would like to replace it with a disc of larger capacity, say 500 GB. Can someone tell me if this would be simple, for example a new SATA 2.5 "would be compati

  • upgrade of ram for HP stream

    IM currently looking at purchasing a hp stream and see that it only comes with 2 GB of ram on board. Is it possible to improve this? If so, what kind of ram takes this machine and what would be the maximum amount of ram?

  • I continue to receive messages that are updated even though I have already done them and the successful show

    I did all the updates and I get always say quickly I've updated, I checked the numbers with the story and have been successfully done already, how can I solve this problem?