M1212nf fails to boot after firmware update

The full printer name is LaserJet M1212nf MFP.

I was installing the complete package driver, not the minimal driver file, on a new system of Windows8 is the only wireless. The printer itself has a wired connection to the switch.  He was already working for a Windows Vista, Windows 7 and Linux systems.

During installation, it attempted to load the firmware - I don't know if it has been completed or not.  Now, the printer does not really work.

Since then, even after several cycles of power > 30 seconds, the printer continues to repeat the message "initialization".... ' without ever coming to the ready state.

I tried to reload firmware, this time by the Windows 7 laptop via a usb cable, but it does not appear to be able to connect.

This printer is watered constantly, or is it possible to reload the firmware in new since I assume that the currently loaded or partially loaded firmware is the problem.

Thank you.

Hello world

If you've posted on the forums about this, you will find I recently sent a private message to each of you, and has nothing to do with more troubleshooting. If you have not already posted on the forum about this, please reply to this topic to let me know that you have problems.

Please see the update private message send you in the last two weeks. I would like to hear from each and every one of you who received a private message from me in order for me to solve this problem. Please let me know if you have any questions.

In private messages sent, I ask you to contact you by phone or email. This information is private and should not be given the open forum pages. Please visit the private message that I sent you in order for me help solve the issue. This has nothing to do with in warranty or out of warranty that everyone on this thread has got the same message private that you got me. Please get back to me as soon as possible.

Tags: HP Printers

Similar Questions

  • Vista fails to boot after SP1 update. Lack file ntoskrnl.exe

    I have Windows Vista Home Premium and has just installed SP1 upgrade.  The PC now not restart, even in safe mode.  As soon as he tries to load Vista, an error message occurs: ntoskrnl.exe missing or damaged.  I tried to boot from the resettlement drive provided by Dell, but the same error occurs.

    I ran dell seed assessment tool and the material is very good.

    What should I do to fix this file?

    Thanks in advance.

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Dell recovery options:

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

    Above is Dell to reinstall Vista from the DVD on your computer.

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

    And that way if you have a recovery partition on your hard drive.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • OfficeJet Pro 8620e ADF jam error after firmware update

    After you install the updated firmware from the touch screen of the printer, the printer restarts and now has an error that says "Original is caught in the ADF (ADF).  Open the cover of the ADF, remove and reload the original, then try again. »

    I went through all the steps to clear a jam from the ADF, but the opinion is persistent.  It is not (and was not before the upgrade) in the ADF at all.  Since this coincided with the update of the firmware, my suspiscion is that the firmware has not installed properly or something.  What am I doing here?

    This problem has been resolved using the printer instead of purchase and exchange for another.  I can hardly believe that the cables are working loose within two weeks, she was detained and then broke at the exact time that the firmware update has been completed.  In any case, the problem was solved by replacing the printer.  I don't have any feedback solutions until a month after I did.

  • Qosmio G20-127: after firmware update cannot burn CD or DVD

    I'm updating my firmware from F101 F102 to dvd so I can't copy any CD or DVD in my drive also some CD & DVD cannot be played after this update, I tried to
    install the old firmware F101, but I can't so please help me?

    Thanx

    Hello

    How do update you?
    Before update you the firmware, follow this:
    -Always use AC adapter to avoid a power off by updating the F / w.
    -Do not turn on DVD + r / + RW/RAM DRIVE by updating the F / w.
    -Put an end to all applications except the F/W update of the program.
    -Are not completed with force the F/W update program
    -Be sure to manually restart Windows after completing the update.
    -Update program automatically eliminates the ineligible disks

  • Toshiba 47M7463DG no clouds do not service after firmware update

    Hi all
    I have a problem with my Toshiba 47L7463DG. Services (accessible from the Home button) Cloud stopped working after the recent firmware upgraded. Is there something I can do to return to the previous version of firmware or solve this problem?

    Details:
    Toshiba 2014-051
    May 21, 2015
    Version of the 8.1.97.09.01.1 software
    MBoot Version 00813201
    Shipout G

    Thanks in advance.
    hysten

    After each update of the firmware, reset the TV.
    If you don't, I recommend you perform this procedure...

  • 40L3455DB - not able to access services online after firmware update

    After an update of firmware for my 40L3455DB, I was not able to access online services

    I have contacted the online support, but have no joy, and they say they're looking for him

    what lasts for 2 months

    has anyone else had this kind of problem

    I had also the message on my Toshi firmware update is available, but somehow, I can't install because for now everything works OK and I'm happy with it.
    I would like to know if you can temporary fix it if go back you to the factory settings.

    What do you think about this?

  • SOLVED: Slow wireless internet passthrough after firmware update

    If I first bought a Nighthawk in July 2014 and it was great for a while. Then in the notice happened a few months my streaming services are jumping and more than usual buffering (which was almost never with the Nighthawk).

    I have a connection of 110Mbps (Comcast and through a SB6141 modem), but all of a sudden was only getting 10 Mbps (or less) passthrough on 5 G wireless band (at the beginning of the speed test would sometimes up to 50 Mbit/s, but on a few seconds would fall to nothing..)

    Cable speeds were very good. Always 110Mbps +. Tried several different channels and factory reset the router, wireless speed was still slow. Connected to the Netgear website and submitted a support ticket within 2 hours they sent me with an RMA number and the next day a new unit has been FedEx would be for me. Support rep Tech says it's a problem of material known in some units... I was super impressed with the customer service, it was seriously a no replacement of hassles that took every 15 minutes of my time.

    EXCEPT when I got the replacement router in the next few days, he had the SAME PROBLEM. As soon as the new router is on and I'm connected, I've upgraded to the latest version of the firmware, done a factory reset and down Speedtest. And I had the same problem: speed internet passthrough on all my wireless devices has been terrible. Less than 10 Mbps when I have a connection 110 + Mbps. (Wired speeds were great, it was not a problem of modem or provider).

    Again contacted support and they asked me to download the latest firmware on laptop and upgrade the router manually, do a factory reset before and after the upgrade. They also told me to try to disable WMM (made no difference speed passthrough, but lower my laptop connection between 433Mbps to 54Mbps speed!).

    I tried this... still slow passthough wireless speed.

    The only thing that has changed since I first got a Nighthawk in July 2014 (and I've run speedtests then and had a speed 110 wireless + Mbit/s at the time), is that the firmware has updated several times... makes me think...

    I downloaded the Netgear support the past 5 versions of the firmware for the Nighthawk. http://downloadcenter.netgear.com/en/product/R7000#sear...

    I then manually downgraded the Nighthawk to each previous version (do a factory reset before and after each installation) and ran Speedtest every time. Once I have got down to the R7000 Version - V1.0.3.24_1.1.20 (released 12/02/14) and ran a Speedtest, the PROBLEM has BEEN RESOLVED. Speed wireless devices (laptop, HTC a M7 and iPad Air 2) were all back up to 110Mbps or more!

    Hope this experience helps someone else... If your are affected by the passthrough slow internet speeds and it is not your connection speed (i.e. radio parasites) that is the question, there seems to be a serious problem with the latest latest versions of couple... Try downgrading to the R7000 firmware version - V1.0.3.24_1.1.20

    UPDATE: Yes, I actually tested the speed with several different devices (a laptop HP HTC a M7 and Nexus 9) each on 5G band, all compatible with the latest updates ac. I also used a few test sites of different speed (speedtest.net, comcast speedtest, cnet speed test), not had the same result all devices and hosts.

    However, I actually got in touch with Netgear L2 support for the last month... beta test a few different versions of the firmware of the Nighthawk and even spend more than an hour on the phone one night with a nice guy who told me he was on an island in Southeast Asia, part of the Philippines... This is where Netgear technical support is to halfway between China where they build them and Taiwan where engineers are. After trying all tweak he could think for an hour and not get better speeds wireless, he finally dropped out and wished me a Merry Christmas lol. Not one of these beta firmware made a bit of difference, and I hate the hours that they made me screwing around with them!

    BUT today, they released vR7000 - V1.0.4.14_1.1.50 http://support.netgear.com/product/r7000

    And to my surprise it actually worked! Not only my high speed wireless is returned (120 + Mbps)

    http://www.Speedtest.NET/my-result/4078979293 (laptop)
    http://www.Speedtest.NET/my-result/a/1131321713 (nexus 9)
    http://www.Speedtest.NET/my-result/a/1131332778 (htc a m7)

    but also my Seagate SRD0SD0 previously incompatible (3 TB) USB 3.0 external hard drive works now, too. What a bonus! The reason I bought the Nighthawk was to use as Server DLNA and the monster external HD I picked up 6 months ago only was on the long list of those incompatible with this capricious router.

    But now everything works (at least for now).

    P.S. Maybe it's in my head, but I swear to you that since the last firmware update when running speedtest now or file transfer (while heavy streaming) I can hear the router doing a greater slope electric buzzing/hissing noise is a little disconcerting... I'm not sure my brain fried by overclocked wifi will be worth a high speed in the end...: eek:

  • Sansa Fuze - insufficient volume after firmware update

    After the latest firmware update to its maximum volume looks like a whisper. And the configuration of the System Volume option disappeared! Thought that this setting is set to Normal and should change at the top. But the Volume option no longer exists. I use the same set of headphones. Any ideas? Can I go back to the previous firmware? or should I get another MP3 player? Whenever I update the firmware, I have all sorts of problems! All the presets radio disappear as well! But the problem of volume is the most boring... Thank you all in advance.

    Why throw the baby out with the bath water?  Let build .31 on the device and set your locale.  Choose reset to factory settings, choose in North America and your preferred language.  For Europe, you will need to do is choose "rest" for your steps of FM frequencies.

    Note: You can leave the current version of the firmware installed on the device (build current est.31 ou.33 according to the revision of your device).  Once you select 'Yes' for the mask to reset factory settings, the unit will ask you your desired area.  For the EMEA region, do not forget to go to settings > Options Radio > region and select Europe for the stages of EU frequeqncy.

    I just wanted you to save a lot of hassle!  Your volume option will be available again.

    With regard to the volume, please use good judgment when you listen to your music.  Keep the volume at a reasonable level, because your audience in the long term is much more valuable than a little loud music.  If the device is for the kids, well, as a dad, I know how they are.  Perhaps the limited volume can be useful for once.  You can blame on the EU regulations.

    Bob

  • WRT 160N V3 - signal drops after Firmware update

    Hi I recently upgraded the firmware on my wrt 160N v3 and changed security WPA2 Personal wireless from WEP (I needed to do this to get the speeds of a purchased wireless adapter recently).  Now the router stops transmitting a signal intermittently for about a minute before returning to the line.  The time between drops is also not the same.  Before updating firmware (and change security settings), the router has been solid as a rock.  Any suggestions on how to fix or maybe where I can get the old firmware version (which seems to be more stable than the current version)? THX

    You mentioned in your post that you updated the firmware. So, after firmware upgrade reset you the router? After the successful update, you need to reset the router. It is recommended to reset the router once. Steps to reset the router:

    Press the reset button on the router for 30 seconds, turn off the router, wait 30 seconds and then turn it on. Power light should blink when you perform the reset process.

    After reset, reconfigure the router, and then check the status of the connectivity.

    If the issue still persist then yry the following parameters:

    # Open the browser and in the address bar type 192.168.1.1 which will open the router configuration page.

    # Bring back the MTU (Maximum Transmission Unit) of 1500 to 1400 or less (usually found on the main page / basic configuration of your router). Here is the link to determine and implement the right size MTU: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=fbf8e8564632422eaa8ea80bf9dcba64_386.xml&pid=80&re...

    # Click on wireless tab select the channel wireless at 6, 9 and 11. Click on save settings.

    Settings wireless #Adjust the following:

    ~ ~ Reduced from 100 to 75 beacon interval

    ~ ~ Lower the threshold of fragmentation of 2346 to 2306

    ~ ~ Lower 2347 to 2307 RTS threshold

    Then reconnect to the wireless network and then check the connectivity status...

  • machine is trying to perform a PXE boot after installing updates-"operating system not found error" when PXE boot

    Original title : Aucuns OS after installing updates save broken disk how to reinstall windows vista

    I installed the microsoft updates on my Vista laptop and now the system does not start. Error message is:

    Check the connection of the cable! PXE - MOF:
    exit Intel PXE ROM.

    Operating system not found
    Backup of disks were damaged
    starts from disc downloaded ubuntu, so no problem with a hard drive.
    Cannot access then unable to return to the last good configuration safe mode?
    where can I download vista to reinstall?

    Hello

    Contact your computer manufacturer and ask them to send a set of recovery disks Vista.

    They should do this for a small fee.

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    Read the responses in these links on the false boot order and network devices.

    http://www.techsupportforum.com/forums/F16/PXE-MOF-exiting-Intel-PXE-ROM-41235.html

    http://www.computerhope.com/issues/ch000706.htm

    See you soon.

  • WRT54G v4 unusable web interface after firmware update

    I tried to upgrade (actually downgrade) my WRT54G v4 firmware 4.30.11 to 4.21.1. When the progress bar reaches the mark to halfway, I got the message saying that the upgrade was successful. However, now the web interface is so messed up that it is unusable. It's a sign that something went wrong.

    Power, WLAN, Ethernet 1, and Internet lights are all green solid, which should be a good sign. After the upgrade, the web interface says "WRT54G 4.21.1', which is the firmware messed up I am downloading. Browsers, then restart my computer, I have confirmed that it is a router problem, not a problem of the browser cache. I also tried to do a hard reset by pressing the reset for 30 seconds button, unplug the router while holding down the button of reset for 30 seconds and then plug the router while holding down the button of reset for another 30 seconds. This has not fixed anything.

    I encountered a similar problem after an update of the firmware several years ago and the fix to upgrade the firmware using TFTP. This time, however, the TFTP utility could not download the firmware. Using a hack that I found on the internet, I have re - download the 4.21.1 firmware, but the web interface was always messed up. I then downloaded the 4.30.13 firmware. The web interface is still messed up, but then he said "WRT54GL 4.30.13. I then went to the firmware I wanted, WRT54G 4.21.1. The web interface is still screwed up, but said «WRT54G 4.21.1»

    Anyone know how to solve the problem? Yet once, it took place immediately after a firmware update, the web interface is unusable, is not a problem of the browser cache and tried a hard reset.

    Thanks in advance if anyone can help.

    My router model is WRT54G v4. The v4 WRT54G and the WRT54GL are generally considered to be the same device with different model numbers. According to the article of Wikipedia WRT54G, "the WRT54GL is technically a reissue of the version 4 WRT54G."

    I used the firmware 4.30.X for years without problems. However, I decided to switch to the 'right' firmware for my router and something went wrong during the upgrade.

    I solved the problem. I basically just dropped the Linksys firmware and uploaded the DD open source-WRT firmware mini instead. Now everything works fine.

  • Unable to connect to LTE after firmware update

    My D5833 could connect to LTE after upgrade to Android 5.0.2. However, it can not longer after the new firmware updated to 23.1.A.1.28. I tried to turn off the phone, remove the SIM card and insert the return; tried flashing using flashtool, none makes it capable to connect to LTE.
    All the tips to solve the problem

    Try to manually add the APN settings and also get a new micro SIM card.

  • Speed drop after Firmware update WRT54G2 wireless

    I have a WRT54G2 V1, which began to do a lot of loss of wireless signal, the wired computers are always connected to the net, completely wired computers lose the connection. I decided to try an update of firmware for 1.0.04)is Build 5. and the flow has fallen by 2 members! The wired computers have the same speed of connection as before. I feel is one of the parameters of connection in advance, don't know how tweek. I already went through all the different voltages without success.

    Help!

    So all settings are the same after the update of the Firmware but I went a head and did a reset and all, still half speed re-admitted. It fixed by a new round of power. Also since updated the firmware and reset have not had problems with the router stopping broadcasting either.

  • Misprints LaserJet 500 M551 after firmware update

    I recently updated the firmware on the M551 dn 500 laserjet printer.  I installed the update of the firmware successfully, but I keep is printed with characters on the pages 'trash '.  He randomally prints this way and is not consistent.  I don't have that happen after the upgrade.

    I updated the firmware twice in an attempt to erase mistakes without result.

    I did the format clean and complete part and I still get the same errors that occur.

    I tried the upgrade to the current pcl6 driver as well.

    I use windows xp and older windows programs.  This happens in the office software and software autodesk as well.

    I am ready to return to the previous update of the firmware if possible.  I had problems with this firmware update so (printer refuses to print after a period of time), but I'm ready to come back just so that I can keep the waste of paper.

    I've attached an example of printed copies.

    Hi vbrown,

    I don't know what worm pcl6. you use, but try to drive perhaps PS

  • USC fails to load after firmware upgrade on PET310

    A former T310 with Perc 6i (not LCD, no iDRAC LAN port) had USC worm. 1.3.0.40. I could not install w2012, so I tried to update the firmware of the USC. I installed the USC worm 1.5.0.29_A00 successfully (twice already), downloaded from DELL by the label of the Server Service.

    After the reboot, choose System Services, USC can not finish loading, only to wait with the message on the screen: entering the System Services... Starting unified Server Configurator.

    In the LOG I found the new pair of messages after FW update: ROMB battery: charge detector, falied emerged. / Sensor batterery, has not been Desassertion.

    What can I do now? Where to download the older FW USC of?

    Hello

    It seems that 1.5.5.18 is the last USC for T310s without an express iDRAC. I would try to install it:

    http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=YV2KT

    Thank you

Maybe you are looking for