M1536 Save Scan over network

Similar Questions

• LaserJet professional M1217 nf: cannot scan over network with a printer laserjet 1217 on a Mac

  Hello

  My set up:

  Mac with Yosemite

  LaserJet M1217 more wireless

  Description of the problem:

  I can't scan. Preview, the control panel or image capture, I get the same error saying "cannot open a session.

  I have installed and reinstalled the drivers/printer about 100 times.

  I tried to add the printer/scanner like airprint, or with the name of the printer as a proposed post.

  Just what causes the same error.

  I have the 2.0 version of the driver installed right now. Tried with 1.7, same result.

  I can print without problem since my Mac and my iPad.

  Tried it with an ethernet cable and have the same problem in case someone ask.

  I looked all over google and doesn't seem like someone else has the same problem? Many people have problems printing over wireless, but it's ok for me. Is the scan, I can't go to work.

  Pages of HP does not offer any other driver which has of the Yosemite. HP offers no additional program for Mac and scan.

  Don't know what else to try.

  Little help? Anyone?

  Thanks Geminy02,

  Unfortunately, your suggestions did not help, and I have a few comments about them.
  First of all, your suggestion about the router was the problem is quite impossible, as you will need to check if the ports are open only in the case we're talking about two different network segments. If you have your printer and your computer in the same segment you will have problems of ports.
  Second: if I would have chosen IP protocol to add my printer, I wouldn't take the option scan, as you said, which means I could not done any tests that I mentioned in my original post, and I would never have had to the point of getting the error message.
  Thirdly: the drivers that you MENTION for download are exactly the same as you get with yosemite, so, this could help to reinstall the driver, it's kind of a long shot (and yes I tried).

  In fact, I managed to solve my problem by doing a factory reset of the printer, any sign of a printer in my computer, cleaning and reinstall the printer using the airprint driver suggested by yosemite where to find my bounjur printer.

  I tried ro think what could be the reason, or to see all what I had changed, and the only thing I've seen different in the configuration before and after he started to work was the name of the printer. When it did not work my printer was called simply "printer", when he was working he was the full name that comes by default. It would be very strange, that this is the reason, but I just mention it here just in case someone read. I believe that the factory reset was the difficulty, not the configuration itself.

  Just for the other readers, I can confirm that this unit can print and scan over my wiresless and cable network on yosemite, with the help of preview, capture image or scan property in the control panel. It took me several hours to make it work, but it does, and my best friend was all the time the printers web page, where you can change the configuration of the printer.

• Specify the device during the scan over network (HP1212nf MFP)

  Hello

  We are a small business owner and newly installed 3 HP1212nf MFP printer on the network, all my clients PC have at least two printers installed as backup to another. All is well as far as printing is concerned, but I have a problem with scanning. There is no other choice, I could well to select the specific device when scanning the document. the HP software named "scan to" default is by scanning the 1st device installed on any PC. is it possible to select a specific device during the scan on the network?

  OS: Win 7 and XP

  Thank you in advance.

  Hi Aquariens,

  After test, I found that the scan to application doesn't have the ability to designate between same model printers. This is normal on this printer laserjet consumer software.

• Able to print not scan over network, with Officejet 6500 E710n-z

  I tried with and without wire.  Printer was not detectable when connected wireless.  WLAN in wireframe, but can not scan from my office.  It gives an error of communication.  To print.  Tried with firewall disabled.  No chance!  Help, please.

  I solved it by turning off all computers, printer, router and modem and turn them then turn it back on.  It worked and now it works fine.  Thanks for your help...

• LasetJet Pro M475dn: Impossible to scan over the network after upgrade to El Capitan

  After that I upgraded to El Capitan I no longer use HP Scan or HP Easy Scan to scan the network more. I can print to the printer, but analysis always results in the page being pulled by the document feeder, but applications just to lock-up without the document showing. Everything worked fine on Yosemite.

  I found a workaround solution that once worked before after a update of Mac OS X (but had to change the name of file, much like the original file has disappeared). Just download the next file on HP (no matter that it is not for your printer; it's not mine either (OfficeJet Pro L7680) but it works).
  
  FTP://FTP.HP.com/pub//softlib/software12/COL51752/OJ-125213-3/HP-inkjet-SW-OSX-Mavericks_v12.34.37.dmg
  
  Disable SIP for this installation and when you run the installation program (do not know if you need to do, but I did anyway). To do this, the instructions are here:
  
  https://forums.developer.Apple.com/thread/3981
  
  When you run the Setup program, make sure you hold the CTRL key when you right-click on it, then click Open in the menu.
  
  Run the Setup program. Be sure to select the HP scanning software and install it. When you get to the configuration of the printer, just skip this step (unless you are using the printer in question). The parser components are what you really want from the printer drivers are already in El Capitan, if you have a HP supported printer. The scanning software will have already installed to the moment you arrive at this screen.
  
  Install the HP Easy Scan on the App Store app (if you get the latest version of the software your front-end). You should be able to run the scanner and scans without restart. I don't know if it will work for everyone, but certainly, it worked for me and keep me until they find what went wrong in El Capitan to disable scanning and scanning capabilities.
  
  SIP turn on again so that your Mac is better protected. We should all work after that. After doing the above, I found that I was able to not only use the HP software, I was able to use Image Capture, preview, etc, to get images from the scanner. Your mileage may vary, but if all goes well it will work again for you all.

• HPOfficeJet Pro 8630: Scan to network folder fails

  I have recently reinstalled Windows 7 without password on my computer, although the previous installation did use a password. Now I can not scan to network folder (error message that the user name or password is incorrect), or save faxes on my computer. (error message that there is no communication between the computer and the printer). I checked the windows firewall, I restarted the router, printer and computer. I use an Ethernet connection to the router.

  Hello

  First of all ensure that protected by password sharing is disabled for your operating system, otherwise it will fail:

  From the Control Panel, under network and Internet open the network and sharing Center.

  Ensure that the network type is displayed as a home or work network, if it is listed as Public network click on it and select home or work.

  In the left pane click on change advanced network settings and select turn off password protected sharing.

  Search for now any change.

  If you have problems to right click on the Shared folder, and then select Properties.

  Ensure that the folder is shared as sharing.

  Click Advanced, and then click permissions and ensure that your users have all permissions to this folder.

  Hope that helps,

  Shlomi

• Change default address "scan to network" on C2665dnf

  I had a successful address configuration "scan to network" of the LCD screen of my C2665dnf for a notebook of Windoze. The laptop has changed, new name, new address. I changed the address in the address book server and it works for scanning.

  However, whenever I select "network analysis" of the screen LCD, "pre-selected" default address is the old laptop that no longer exists. I have to go to select the correct laptop from the address book each time - what works, but it is a bit of a pain.

  No idea how to reset default 'scan to network' to be a different address?

  This sort end account - not very intuitive, but you must select the address you want, and then change the scan settings to and then click on the "Save" button. This saves the scan to settings, including the path of the server chosen as default for this icon on the LCD screen. The main thing was to save, even if you make no changes to the settings (except the server).

  Once I had worked to this point, I was able to create a new icon with different parameters (scan in PDF format, for example), then now simply just choose the correct icon for the work.

• OfficeJet 8620: Error using scan to network folder - although the EWS test demonstrates the success

  I have configured the 8620 via the integrated Web server for scanning to \ \Scans < ip address of my macbook > the 'test' function's successful return.  However, when I run a scan to network folder in the control panel of the printer, I get the error: "cannot write in------< ip address > \Scans.» Destination folder is read-only, has the wrong permissions, or is no longer available. "I don't see how that's possible given the test of EWS.  I confirmed that the file is read-write for all.

  Hi @tfeeneytx

  I see that you have taken the lead and sent the scan to network folder problem you encounter as you mentioned that you on your previous post. I'd be happy to help you with this also.

  Please use the following document to ensure you have the analysis of the configuration of the network folder correctly; Scan from the control panel (including the Scan to Email, in PDF format, and to a network folder) for Printer series e-all-in-one HP Officejet Pro 8610, 8620, 8630, 8640, and 8660.

  Please also ensure you have the latest update of the firmware for the printer; Update of the Firmware 8620/8625 e-all-in-one printer Officejet Pro HP.

• Color LaserJet MFP M476 Pro: Scan to network folder

  Finally decided to try to set up the scan to a folder again... but run into the same issues as before... invalid name and password

  The printers and mac are on the same wireless network and have no problem printing.

  Using Macbook Pro running El Capitan 10.11.6 - has only one user on mac... Bob

  Not yet completed:

  Folder created under users\Bob\Scan

  Went to the settings and turned on file sharing and add the Scan file to the list of shared folders and make sure "Bob" is listed as a user with read/write privileges.

  Page web accessible to 192.1.168.88 printer

  Selected scan / file Configuration of the network

  inpu the following parameters

  Display name - Scan

  Network path - \\192.168.1.94\Scan (confirmed this ip address is the ip address for the mac)

  User name - Bob

  PW - same as the one used to log for Mac (verified by up to 30 times!)

  Continually get "user name or password is incorrect. Make sure that the user name and password are correct"

  Any suggestions?

  Hello

  As long as you enable sharing of Windows files for the user the pritner will not be able to connect because it only supports SMB.

  By testing, I see the user as available for selection Although SMB is off...

  By searching online, I do not see messages indicating you will not be able to set in Windwos God file for the password iCloud user, may it be linked? :

  https://discussions.Apple.com/thread/6708192?start=0 & tstart = 0

  You can try creating a new user account and set it for this purpose (you won't even need this user to login, just set it to the printer while offering both users access to that folder, then you can continue to use your current users).

  Another thread indicate that change the password solved the problem:

  https://discussions.Apple.com/thread/6629743?start=0 & tstart = 0

  For any other questions, I suggest to start a thread at Apple Support communities, as long as you won't solve this problem, the printer won't be able to connect.

  Please let me know any progress,

  Shlomi

• LaserJet Pro M225dw MFP: Problems of scan to network folder

  Hello.

  I set up a portable computer with the printer mentioned above. No problem printing and no problem to set up Scan to network on the web interface folder (ran test and got the result OK) but there are issues when scanning in fact the printer. I put it in a document to scan in the top loader, select scan, scan to network folder, your computer (or rather folder name) and click Scan. The printer draws the paper and then started working. A pdf document will appear in the folder, the printer is how ever is already done. He keeps grinding on it for a while and then the signals being completed. At this moment, the pdf file disappears from the record.

  What could cause that?

  Hi @M3rLiN_74,

  Welcome to the HP Forums!

  I noticed your post about how you cannot scan your network with your HP LaserJet Pro MFP M225dw 10 pro Windows folder. And I'm happy to see it for you!

  This could be a problem with the charger of the printer, or perhaps a connection software / junk the computer. What happens if you try to scan to network folder using the glass of the scanner of the printer? Are you able to scan from the computer by using the top of the charger page? Scanning the computer (Windows).

  For the moment, please try our HP print and Scan Doctorand let me know what happens!

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope hear from you soon!

• M277dw MFP: MFP M277-DW Scan to network folder

  In the settings of the printer - tab analysis - scan to network folder Option. I tried to capture the information of folder in smb and afp format. None is accepted by the printer. Can anyone help? Note that this is to connect the printer to a shared folder on a MAC

  Thank you

  Hey @Hopflys, welcome to the Forums of HP!

  If I understand correctly, you configure the scan to network folder and despite your efforts, shared folder information is brings not accepted. Please take a look at the following post, written by @Gemini02 , as well as the steps to configure the feature described and easy to follow: Re: configuration of scan of file.

  If you need assistance, I would like to know the results of your efforts and I will do my best to help. If this solves the problem you are experiencing, please be sure to click on the I accept as Solution button below so that others can see what has worked for you.

  Thank you.

• Unable to save scans to computer in microsoft word on printer HP Photosmart5510 B111a format.

  I can't save scans on my computer in microsoft word format on printer HP Photosmart5510 B111a. Only the printer format is PDF.  I do not get a choice to add pages to PDF or another so each scan a page saves in PDF format. I tried to convert the PDF scans into word documents to microsoft without success because of the encryption. Is there a software ' add on ' I can solve this problem?  I want to save scans to computer in microsoft word format not. PDF Or is there a code I can use in the printer to change the PDF format?   Help, please.  

  Hello

  You need an ORC software to do this. But you can use Microsoft Word (2007 or 2010) himself to work for you. Please, use the following method:

  http://Office.Microsoft.com/en-us/Word-Help/scan-and-edit-a-document-HA010254879.aspx

  Good luck.

• Error with eStation Zeen - no scan for networks

  I have problems with the Zeen on our station.  We stopped using for a few weeks while moving around our headquarters, and now the Zeen gives the error message "Unable to scan for networks" as soon as I try to turn on the wireless Zeen.

  We also have a new router, so I don't know if they are related.

  I tried a full reset to factory specifications, but as soon as it comes to the installation of the network I get the message "unable to scan for networks."

  My PC is a laptop HP with Windows 7 Home Premium x 64

  Printer is a C510a

  I am trying to connect wireless.  The printer works when it is connected via a usb cable.

  Firmware version is ZEP1CN1130AR (2.2) (113110)

  The blue light on the printer wireless flashes.  However, as soon as I get to the installation of zineb and try to turn on the wireless zineb, I get the same error message.

  I found another thread with this exact error message, with no responses.  I found a bit on connectivity issues of zineb/printer, which I had at some point, but this isn't really the issue here.

  No chance, it's hardware related?  More troubleshooting ideas?

  Thank you!
  Ian

  Everything still works for you?  I hope so!  If the problem does not return, please check accept as Solution to help others with this problem.  If this isn't the case, I can't wait to know if Airprint works even when the Zeen is not.

• HP OfficeJet Pro 6830 - scan to network?

  Hello

  Anyone know if it is possible to set up scan to network folder/path directly using the Officejet Pro 6830? The option does not appear on the printer control panel and requires the computer to be turned on in order and this option for the analysis to cross successfully.

  If not, are there plans to add this feature in a new version of s/w?

  Thank you

  Breleur

  HI Sylvain,.

  The model HP Offiecjet 6830 Pro does not support scanning to a network shared folder.

  For series Officejet Pro 8600 Officejet series manages this type of functionality, not the 6800 series.

  I highly doubt such a feature will become supported in the future...

  You can check the scanning to E-mail option of the printer, such only require the printer to connect to the network and need not the PC can be powered on:

  http://support.HP.com/us-en/document/c04310033

  Shlomi

• HP3070 analysis via the USB port, but don't scan the network, printing is ok? Used to work, but no more

  MyHP3070 deskjet will scan and print via USB link, but don't scan the network, printing is authorized via netowrk. Used to work but not anymor. I have windows XP laptop. I tried HP doctor but in vain. It says that it cannot connect with the driver. Tried to uninstall and reinstall from the CD and also downloaded driver via HP web page but does not. Any ideas what to try next? Also have Norton 360 software virsus and tried extinction of firewalls, etc., but it doesn't seem to help. What is confusing, is that it is used to work but now is intermittened, it won't work at all.

  I managed to uninstall with REVO Uninstaller. This removed the driver original from the Add/REMOVE program possibly a result.  This then allowed me to install the driver that you recommended to your link above. I ran out of time yesterday to test if the printer has worked with the new download, so I'll have to try again later today to see if it works. I would grab with result.

  Thanks a mil