M175NW: No scanning with M175NW with Apple El Capitan!

Similar Questions

• Upgrade software HP D110 scans with apple, but does not complete scan

  After all the things suggested, the printer/scanner will scan, shows me an overview, says has put images or work, but it does not appear there. Where the analysis? iMac OS 10.9.4, HP D110

  Hi Gemini02

  Thanks for your quick response. There are 2 missing pieces in your answer.

  I need to change the "last printer used" default printer "HP Photosmart... »

  then I needed to go to the image capture. Do the scan from there then click on & select by dragging the mouse over Preview, then confirm it. Then he would go to the place I had specified & this is.

  I could not use image capture without default printer changing

  TSSr

• HP Photo Smart D5110 will not scan with Mac OS 10.9

  Help. I've looked everywhere and can't always come up with a solution to scan from my Photosmart. Worked fine until I upgraded to Maverick. Thank you!

  WelchSHello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are looking in your scanning options. I would try to help.

  Due to the age of the printer, there is no HP software for this printer on Mavericks.  You can, however, use the characters of basic Mac OS and drivers to scan.  I'm including a document on the installation and using the printer on a Macthat should help you to solve this particular section of the document titled "How to scan with Apple software update driver?"

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• How to scan with an office jet 6500 has and a Mac OS 10.9.4?

  How to scan with an office jet 6500 has and a Mac OS 10.9.4?

  Hi midandco and welcome to the Forums of HP!

  I see that you are looking in the scanning options.  I would like to help.

  As there is no software available for Mac OS X 10.9 HP, you are advised to use the driver of digitization of the OS from Apple.  I'm including a document I would recommend using, title v10.9 OS X Mavericks: installing and using the printer on a Mac.  There is a section called "How to scan with Apple software update driver?"  This should help to address the issue.

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• Hi all, I keep is typed in the password at startup box, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Hi all, I get a storm of +'s typed in the password at startup box upward, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Clings in the key on the keyboard? Wired or wireless keyboard?

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• Scanning with HP Scanjet N6310

  I have a HP Scanjet N6310, which is connected to my end 2011 MacBook Pro running Mountain Lion. Although the scanner works well, the size of file for each analysis is ridiculously high. A scan of a page of a document is greater than 4.5 MB. When I took the same page to scan with the copier to my office, the size of the scanned page was only 50 KB. The file size of the document scanned with my scanner is ALMOST 100 x larger than the size of the file of the same document scanned at work. I checked my settings and have the preset on 'document' and not 'pictures', 'slides' or 'negative '. Something must be wrong here. Any ideas?

  That did not work. Also, I resumed repair disk permissions and I got this:

  WARNING: SUID 'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent' file has been modified and will not be repaired.

  I don't know what that means or how to fix, but I think I may need to uninstall and reinstall my printer and scanner drivers.

  If Yes, I think that these drivers I need to install (which include the two that you referred me to in your previous post):

  1) ICA Software: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15179&prodSeriesId=3723469&prodNameId=3723537&swEnvOID=219&swLang=8&mode=2&taskId=135&swItem=cs-112996-1

  (2) HP printer drivers: http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US

  (3) HP full software functionality: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3723537&prodTypeId=15179&prodSeriesId=3723469&swLang=8&taskId=135&swEnvOID=219

  I also think this page to propose appropriate measures, but I'm not sure: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03428470#c02917078_UpgradeToOsX10.7

  Also should I install (and then reinstall) the software for my HP LaserJet CM2320? I don't know, but the last link suggest that all drivers must be uninstalled before you download the drivers.

  Thanks again.

• Cannot scan with c309g on the new iMac

  Later Cougar (USB), after you install later (= old) Driver HP and on top of this apple driver (meticulously followed the advice of the post Printdoc 19/08/2009). Printing is fine, do not scan: using system prefs > print & scan > open scanner I get only a gray window. The same phenomenon occurs via Preview. "HP Scan" HP program hangs after clicking "scan" and must be out of force.

  I'll take a look at the following document I linked below.

  OS X 10.7 Lion: install and use the printer with Lion

  There is a section in the document entitled "How to scan with the Apple Software Update driver" who should have the information you're looking for.

• Cannot scan with Photosmart C6280 with Mac OS x Snow Leopard.

  When I try to scan with my Mac, I get a scanner not found error.  I am able to print.  When I access the HP utility, it shows the printer in the installed column but it shows a Red House beside her and will not let me access it. The printer is connected to an Apple Airport Extreme, via an ethernet cable, and the airport is linked via a USB cable to the computer.

  I guess you mean that the printer and the Mac are connected to the router with Ethernet Airport?

  If you are using snow leopard and have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• Not able to scan with the preview after upgrade from Mac OS Sierra...

  After upgrading to Mac OS Sierra. I'm unable to use the preview to scan.  Before this upgrade, it worked fine.  The HP scanner software does NOT work something like OS 10.8 or 10.9.  Preview worked perfectly so far.  If anyone knows how to solve this problem, your contribution will be greatly appreciated.  Thanks in advance.

  Have you tried scanning with Capture of Image instead? It worked for me.

• Unlock Mac with Apple Watch stopped working

  I upgraded my MacBook Pro to Sierra and my Apple Watch shows OS 3 - for a period of time the new feature release of my Mac with Apple Watch worked very well

  He stopped and the option no longer appears in Settings/Security and confidentiality on the Mac - I suspect its because I had to change the password on my Apple ID - I think that if I could the closing of the session of this identifier on the watch and log back on it would start working again - but I don't see a way to check out of a Apple ID on the watch or the watch app on the iPhone (7plus)

  I guess I have unfair and then re pair the watch with the phone but that seems a little drastic, so do it before, I thought that I would like to ask a question to the community in the case where someone knows a way to check out of your Apple ID on the watch I don't know - I tried searchingGoogle but cannot find anything on this topic

  This seems to be fixed by my achievement and my Apple Watch with my iPhone repair - of course I don't know if it will happen again - I suspect (and its only that) is the problem has been caused by my change the password on my Apple ID - but when I went to watch outstanding I was asked for my password Apple ID and he accepted the new password

• Can I connect more than one headset bluetooth with Apple TV 4?

  Can I connect more than one headset bluetooth with Apple TV 4?

  No, sorry. This is a limitation for all devices Bluetooth headset.

• Unlock the Mac with Apple iWatch

  I have a MacBook to 2015 and iWatch. The Mac is on MacOS Sierra and the iWatch is on version 3, so both devices are on the latest version of the software. I also have an iPhone on the latest IOS that the watch is twinned with 6. All devices are on the same iCloud account.

  I tried everything I can do the iWatch unlock the Mac. I'm getting very fed upwards with it's complicated. I spent 2 step 2-factor authentication audit and I read each thread and an article I can find, but I can't get it to work. It seems I'm not the only one. I thought that Apple was easy to work, but with each update and the new feature which is launched, it becomes more complicated.

  I spent hours trying to work and decided that he would save me more type my password every time I have unlock the mac it takes to implement this feature from time to time saving!

  In any case, after trying everything I always get the message "your Mac was unable to communicate with your Apple Watch."

  

  If anyone can help I would really appreciate. Otherwise, I will ditch the idea to get this feature to work.

  Thank you Apple lovers.

  Try these similar thematic subjects - Impossible to unlock MacBook Pro with Apple Watch OR your Mac was unable to communicate with your Apple Watch OR your Mac was unable to communicate with your Apple Watch

  Allow automatic on your Mac and Apple Watch unlock OR similar link

• Why auto unlock Mac with Apple Watch stop working?

  When I upgraded to first watch OS 3 and macOS Sierra, auto unlock Mac with Apple Watch worked. A few days change it has stopped working. What could have happened? I checked all the settings/preferences.

  Your Apple Watch is unlocked?

• Auto unlock with Apple Watch

  Dear support team Apple,

  I have problem with MacOS Sierra feature "Auto Unlock with Apple Watch". I upgraded my MacBook Pro 2015 until the latest Version of the OS and Apple Watch until the OS 3.

  I followed the instructions automatically unlock your Mac with your Apple Watch - Apple Support

  As a result:

  1. two factor authentication enabled on iCloud account;

  2. pass code activated on Apple Watch;

  3. I use iCloud even on Mac and on the watch.

  But the option is not in the system preferences. Attached printscreen.

  I have exactly the same problem. I checked that I have two factor, not two steps of authentication. I have a the same devices, 6 2015 s of MacBook Pro, Apple Watch and iPhone more. The option does not appear for me either.

• Turn on auto cannot unlock with Apple Watch

  Hi guys,.

  I need help here.  I'm on macOS Sierra on a MacBook Pro (retina, 13 inches, end of 2013).  I actually had auto unlock with my Apple Watch two days ago.  But then I did a stupid thing yesterday and had to restore the MacBook OSX Maverick and re-upgrade to Sierra.  I can't activate longer auto unlock with Apple Watch now and it's really frustrating.

  Thanks in advance for your help.

  Don't feel alone, there are a lot of problems. Very inconsistent behavior.

  Requirements for continuity on Mac, iPhone, iPad, iPod touch and Apple Watch - Apple Support

  http://www.CultofMac.com/441405/how-to-use-Apple-watch-to-unlock-your-Mac-in-Mac os-sierra.