M251nw color LaserJet pro 200: does print in black only, no color

All of a sudden, my m251nw color laserjet pro 200 prints only black. Cartridges changed (C/M/Y) without modification. Toolbox shows that they are all 100%, but nothing will be printed in color, not even the Demo Page. Anyone able to help?

Updated the firmware from hp, and it fixed the problem.

Tags: HP Printers

Similar Questions

  • LaserJet Pro 200 MFP: Print of wire connected & Wifi printing

    Our Laserjet pro is connected to our network.  We can print with it from two desk top PCs. (1 running on XP the other Windows 7)

    I also have a laptop (Windows 8.1) I can print wireless to our other printers a 5514 photosmart HP and 110 HP.  I would also like to be able to print wirelessly with the Laserjet printers, but I can't unless I unplug the wire?

    Is there a setting I need to change to be able to print wireless while maintaining the connection of the wire or is - not possible?

    Thank you

    Catko

    USB, Ethernet or USB and wireless

  • the Laserjet Pro 200 MFP can print on 110 lb card stock?

    The all-in-one Color Laserjet Pro 200 can print on card stock 110lb?

    Hello

    The following specifications matrix info shows:

    http://WWW8.HP.com/au/en/products/printers/product-detail.html?OID=5097655#! tab = specifications

    Weight, supported

    60 to 163 g/m² (up to 220 g/m² with HP laser glossy photo papers)

    Recommended media weight

    60 to 90 g/m²

    With the help of the following conversion

    http://okpaper.com/calculators/lbs-to-GSM

    110 lb = 162.8 g/m² or 163 g/m²

    This can work, a bit tie, no room for error.

    Kind regards.

  • LaserJet pro 200 driver installation error

    We have a Server Windows 2012 that I can't seem to get the driver printer laserjet pro 200 M276nw on.  He goes through the process of driver download and in the end gives me one error of installation - no further details.  Also, trying to download the print driver, it seems locked somehow all printers on the network.  I had to reboot the server for the printers run again.  Any ideas what could be the problem?  I've disabled our anti-virus and tried to download the driver print, but still got the same message.  Currently, the only way I can get the Laserjet Pro 200 to print is to use the universal print driver.  Thank you.

    3022 wrote:

    We have a Server Windows 2012 that I can't seem to get the driver printer laserjet pro 200 M276nw on.  He goes through the process of driver download and in the end gives me one error of installation - no further details.  Also, trying to download the print driver, it seems locked somehow all printers on the network.  I had to reboot the server for the printers run again.  Any ideas what could be the problem?  I've disabled our anti-virus and tried to download the driver print, but still got the same message.  Currently, the only way I can get the Laserjet Pro 200 to print is to use the universal print driver.  Thank you.

    Is it the driver of your trying to get?

    Pilot product page...

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4138 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5097654 #n187

    Driver Windows 2012

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kJ-107843-4 & CC = US & DLC = in & LC = on & os = 4138 & Product = 5097654 & sw_lang =

  • HP LaserJet Pro 200 color M25: installation printer HP Laser Pro 200 M251nw.

    M251nw color HP LaserJet Pro 200 No. product installation. CF147A: Installer said he has successfully installed my printer, but then the printer to add it to the window that says it can't find printer.  HP said I have to get my license from Apple. Apple says that I have to get my HP permit

    Hi @steeldrv ,

    I understand that you are having problems, adding the printer on Mac. I will do my best to help you.

    How is the printer connected? (USB, Ethernet, WiFi)

    I checked online and there is a form available full functionality driver HP.

    What is the software you have installed already, who says it was successful?

    HP LaserJet Pro 200 color M251 full set Solution software - Mac OS X 10.6, OS X 10.7, OS X 10.8.

    Try the following steps:

    Fix permissions of the drive on the Mac:

    Close all applications.

    In the Apple menu, click OK, click Applications, and then click utilities.

    Double-click disk utility.

    Highlight your hard drive / partition on the left.

    Click on check and then repair disk permissions.

    Restart the computer...

    Reset the printing system:

    Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

    Click on the Apple icon and then click on System Preferences.

    Click on Printers & Scanners.

    Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

    Click OK to confirm the reset.

    Type the name and the correct password.

    Click OK to reset the printing system.

    Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

    Were you able to find and add the printer in?

    Print a self-test of the printer to make sure this isn't a hardware problem, causing the printer does not detect.

    Print a Configuration report.

    If the printer is networked, try and access the Web built-in to the printer server.
    Type the IP address in the address bar of your web browser. (Safari)

    It loads the page Web has?

    Please let me know the results and the way that the printer is configured, so I can provide appropriate measures to solve this problem.

    Good day!
    Thank you.

  • LaserJet Pro 200 M276NW color does not print more than once; application freezes

    Hello.  I had a problem with Laserjet Pro 200 color M276NW my family when printing from my desktop Windows 7 (64 bit) for quite awhile.  The first time I print a document after starting my computer, it prints the entire document very well.  However, the print jobs will simply freeze the program that sent them (for example Outlook, Opera, etc.) on a screen ' print the page of.  Also, I can't print a test page in Windows when the first task is completed.  I finally realized that it probably has something to do with the spooler service in Windows, or in the print queue.  When I look in the queue after printing the first document, it shows that the paper in it, but the new job that froze my app does not appear.  After I restarted my computer, I can print a document more before I have to restart again.

    The printer is networked on our home network; It is not connected to any computer via USB, and in my opinion, is the connection to the ethernet router.  My computer is connected to our network via a wireless connection.  I tried to restart the spooler, enter the IP address of the printer in my web browser (which works fine and shows the right page), and everything else listed in the Help article.  Try to open the printer properties in devices and printers does nothing.

    To complicate, the printer won't even print the first work since I got on my computer and I tried this today.  Also, I got exactly the same problem on my laptop, which also used Windows 7 and connected to our home network wireless. The laptop now has Linux on it instead. I tested several printing on it earlier and they print very well.

    My father, who has a wired connection to the router, told me that it is able to print more than one job very well.  I just had my brother (who also has a wired connection) print two different documents, and it has worked very well.  This leads me to believe that there is somehow something to do with the Wi - Fi computer assigned to the router, in combination with Windows 7, apparently.

    Moon Raker, starting with the sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.
  • Color LaserJet Pro 200 M251n: LJ Pro200 M251n not print not some font sizes

    My new printer does not print text to certain sizes of fonts using Word or Publisher 2010. Until 60pt, it's good, but not 72, 100, or 120. However, it will print 240 pt. It will also display these text elements of the pdf document.

    Is this a driver problem? I use PCL6 but cannot find any drivers on the HP site. Do I need UPD PCL 6?

    Hello

    Update the latest firmware for the printer, which should solve this.

    Use the next tool if it is connected with a USB key:

    http://ftp.HP.com/pub/softlib/software13/COL44532/LJ-108129-8/M251_color_Series_FW_Update-20150212.exe

    For a network connection, follow these steps:

    http://support.HP.com/us-en/product/HP-LaserJet-Pro-200-color-printer-M251nw/5097632/model/5097639/document/c03341482

    Kind regards

    Shlomi

  • HP Laserjet Pro 200 m251nw: I've got streaks printing on laserjet 200.

    All of a sudden, I have red streaks, printing on the right side of my documents. I tried using the cleaning page and it doesn't seem to help. I also have small black dots in various parts of the document which keep appearing on my documents. Cleaning that does not either.

    It seems to be a residue of red on the sponge roll just before the paper out of the printer. How can we clean this roller or must it be replaced to correct? I used my vacuumn to try to clean it up, but it doesn't do any good.

    Need help.

    Hey @AlaskaMariner,

    Welcome to the Forums of HP Support!

    I understand that you have a problem of magenta print quality printing of your color HP LaserJet Pro 200 M251nw of the printer. I would like to help you to solve this problem today. Thanks for the troubleshooting steps you have already tried before reaching out for support, including.

    On this model of printer there no zones in the product that you can clean it manually. The only method supported this printer paper path cleaning and area of the cartridge is running the cleaning page. You may need to run the cleaning a few times page to fix this.

    Sometimes red streaks can be caused by a low toner cartridge. When toner is low, it can gather in some areas inside the cartridge and create a "streak". I can have you hold the cartridge by the sides and shake it gently from left to right to redistribute the toner. Once the cartridge has been shaken, reinstall the cartridge. Once your cartridge is re-installed, please test print to see if the problem of dragging is still happening.

    If the problem persists you can please click here for the steps of quality supported by your printer. "Once the document of support opens please run through the steps to"check toner cartridge status"", "make the diagnosis of additional print quality" and "inspect the drum unit for damage".

    If the quality issue persists you may need to try a new HP authentic to verify whether this problem is caused by a magenta cartridge faulty cartridge or the printer.

    The black dots that you see are often caused by a dirty paper path roller or fuser on your printer number. As mentioned previously, the only way to solve a dirty paper path would be to run several pages of cleaning. A defective fuser unit would lead to a replacement of the entire unit.

    Please reply to this message with the result of your troubleshooting. Good luck!

  • LaserJet Pro 200 m251nw: how to disable these pages printing pesky notification?

    I just bought the LaserJet Pro 200 m251nw to help with homeschooling and coupon printing. A big HUGE machine so far, one small complaint... whenever I have do something or something (ie: plan a printout of the spreadsheet on an app) Springs this page full color printing. I don't want to lose my ink telling me I just do what I know already! Can I disable it somehow? Thanks in advance!

    Hi @g33kyg1rl

    Welcome to the Forums of HP's Support.  I see you want to learn how to turn off notifications in HP connected for your Laserjet M251nw printer.

    Please follow the steps listed below:

    1. Connect to your HP account connected, which will take you to the Welcome screen.

    2. Please click the drop down arrow next to 'Settings' menu and choose 'Notifications '.

    3. If please check or clear the parameters of notifications that you prefer and then click on "save changes".

    Please let me know how it turns out.

  • LaserJet Pro 200 m251nw: Laser Jet Pro 200 color ink bleed on black and white page after some use

    I print mostly black and white documents. I recently had 2 ink color of defamation in the pages that are supposed to be just in black and white printed. The first was the magenta, and it might discolor the entire page. The second was yellow, and it could fade just the left and right margins. It was two cartridges to Cartridge World, and they have done very well for some time after the installation or always had plenty of ink left when this problem occurred. The manager at Cartridge World has estimated that perhaps the part of the waste of the cartridge has been complete over time and flees to the ink. He said that for most black and white print still causes the drum on the cartridges of color to turn and empty the little ink in waste room. His suggestion was to get a second monochrome printer for most usage of my impression and just this HP product when the color is required. Who is? Other suggestions? If I replace the suspicious cartridges, print returns to normal, at least for a while.

    Hi @la1959,

    Welcome to the HP Forums!

    I see that your HP LaserJet Pro 200 M251nw, color of ink smear on black and white page after some use. I'm happy to help with this problem!

    According to the website of Cartridge World, http://www.cartridgeworld.com, it seems to me that these cartridges are rebuilt (refills). And, the information in this guide, can I refill the ink in my HP ink cartridge? States:

    Yes, you can. But what do you want? QualityLogic, one of the organizations of quality foremost in the world, has tested the performance of HP refurbished vs brand inkjet print cartridges (filled). Results: original HP inkjet cartridges ink far surpassed refills in print quality and reliability of printing.

  • Print on the two option (duplex) sides missing Mac 10.8 for LaserJet Pro 200 M251nw

    I just purchased and installed a printer LaserJet Pro 200 color M251nw.

    From a Windows 7 machine, the properties of the printer box allows an option (I think on the finishing tab) for printing duplex (manual), which when used will then display a screen printing by telling you how to remove paper from the output tray and reload at the entrance, then press ok to continue with the other side of each print sheet.  I tried my laptop and it works fine.

    Even if it is a manual process for this printer, I would really like to be able to do when printing from my Mac, but it doesn't seem to be a way to select duplex printing.  Is it possible to have this feature?  Is there something I need to set differently on the printer?  It would be really useful.  Thank you.

    Hello
    The two-Sided feature reffer automatic two sided printing.
    As the specific device provide printing manual duplex only, you can perform duplexing manual as follows:

    In order to perform manual duplexing, Joanie you use the Pages to the printer setting, you will find listed in the manual duplex printing sectiong below:
    http://support.HP.com/us-en/document/c01663233

    Kind regards
    Shlomi

  • Color HP Laserjet Pro 200 M251n does not in Sleep Mode

    Printer: HP color Laserjet Pro 200 M251n

    Firmware: 2014-06-04, Version 20140521

    Problem:

    Since the last update Firmware the printer does not sleep/wake no event (all configured to wake up the printer) will wake up the printer. Even to connect via Webinterfac the printer does not respond. Ping also fails.

    Tried to connect the printer to the printer ports / wall plug changed network cables nothing worked.

    The only solution is to reset the printer (power off / on) to get the printer working again.

    Played a bit with the EcoSmart configuration, but little matter what is selected it its always the same as the printer stuck sleep/sleep mode and don't responde.

    Y at - it somewhere the old FIrmware to download to try a downgrade if it would help?

    I really don't think there is anythink else I could try.

    just to confirm that the last Firmware update solves the problem

    If I remember correctly it when, one day in December when it came out

  • Bought HP Laserjet Pro 200 color printer & unable to connect

    Bought HP Laserjet Pro 200 color printer & unable to connect to my Windows 7 laptop. The printer setup was a snap, but no connection. Tried all Windows resources, but...

    Most often when a device does not work, it's because the driver has been corrupted.

    Try reinstalling your.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

    http://captaindbg.com/how-to-update-drivers-on-Windows-7/

  • Multifunction color HP LaserJet Pro 200: HP LaserJet Pro 200 color MFP M276nw on El Capitan: Scan does not

    Since my upgrade to El Capitan my USB connected HP LaserJet Pro 200 M276nw MFP color analysis no more.

    What I've tried so far:

    Installed the latest drivers > unsuccessfully

    Tried all the solutions suggested here: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-LaserJet-Pro-200-color-MFP-M276nw-Scanni... > no success

    Have any suggestions what to do next?

    Update: the solution provided in this thread solved my problems:

    http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/HP-LaserJet-2300-not-working-with-El-Capitan/m-p/5281267/highlight/true#M61077

     
  • Color LaserJet Pro 200 M251 nw: unable to do manual duplex printing with Windows 10

    Using my prior desktop computer that ran from Windows 7, I had no difficulty to do manual duplex printing on my HP LaserJet Pro 200 M251 nw color.  However, having recently bought a new desktop computer running Windows 10, I have more two-sided printing option.  Instructions to Guide the user to http://h10032.www1.hp.com/ctg/Manual/c02886939 are unnecessary because I cannot complete step 3, click Finish.  After completing the first two steps by clicking on file - print and then click Properties or preferences, I am not provided with an option to "print on both sides (manually)" as described in the User Guide.  How can I get manual double-sided printing capability on Windows 10?

    Usually when you have a driver problem, it is best to find the current driver on the HP website, disconnect the printer from your PC, remove the existing driver, and then install the current driver.

    Windows often installs drivers that do not support as many features as the downloadable driver.

    If my post is solved your problem and click the accepted as button solution under him.

    In order to thank a Tech for a post click the thumbs up button under the post.

    You can even click on the two keys...

Maybe you are looking for

  • Symantec support

    The last update says that it does not support the current version of the plugin Symantec vulnerability, so I'm afraid to update because I would lose the security feature of Symantec. Why is the last significant update? When you support the current ve

  • Satellite S3000 - X 11 - installation of display driver problem

    Hello I am trying to install the display driver for my laptop and have downloaded the zip file "display-20080414134834' on the Toshiba site.» This file contains an update of the BIOS and the display driver. Unfortunately, when you try to install the

  • Determination of 4070 self-calibration P/F

    I calibrate by automatic programming 13 PXI-4070 DMM-based daily and must determine whether or not the auto-cal spent on each. I never had a self-cal failure so I don't know really what to expect. An error or a warning will occur? If Yes, what are th

  • Duo of liquid E3 - poor GPS

    Hello I recently acquired a new Duo of E3 liquid as a replacement for my Samsung S3. Although various other smartphones by Acer seems to have GPS related questions, Googling or searching this forum for problems with liquid E3 GPS give no result. So w

  • I can't attach photo to my hotmail, keeps file error occurring

    I tried to reduce the size of the images and downloading various files. Still the same error saying that there is a file error and maybe I lost the internet connection, but this is not the case. I've never been wrong before.