M252dw Pro: color laser m252 jet pro won't print wireless

I have a new color (Christmas) HP LaserJet Pro M252dw. It was wireless printing but suddenly no longer. I rebooted, checked the internet, wireless is running. What should I do?

Oops! Never mind - found the problem. Apparently, my printer was not selected as the default printer. Don't know how it happened, but all is well now.

Tags: HP Printers

Similar Questions

  • OfficeJet Pro 862: Officejet Pro 8625 not print wireless

    Printer worked and printed wireless for a few months and then all of a sudden it stopped being able to print wireless.

    Everything seems correct, wireless connection, print test paper, etc.

    But when I print a word file of MS office since T430 victory 8.1 portable, the printing pool show status 'Impression' and then disappeared. In the Officejet 8625 Panel, there is a "Print report" message flashed in very shot time. Then nothing happans.

    I tried to reinstall the printer, use the HP printer help and HP print and Scan doctor, even check the status of the printer in Web Serive printer, everything looks Ok. In the embedded Web server, tools-> Magagement job-> Job Monitor, the stutas of work says 'done '.

    Any ideas on how to solve this problem?

    Hey @ziyoo,

    Welcome to the Forums of HP Support!

    I would like to help you to solve the problem that you are experiencing when you try to print from your computer Windows 8.1 wireless to your HP Officejet Pro 8625 e-all-in-one printer today. Thank you for all the troubleshooting steps you tried before reaching out for support. Right now, I don't think the wireless printing problem that you are experiencing is caused by your printer or your network connection. On the contrary, I believe that the wireless printing problem is caused by your operating system.

    Recently, Microsoft has released a hotfix to correct network printing issues in their Windows 8 and Windows 8.1 operating systems. These wireless printing problems consist of 'partial printing' and questions 'offline '. The questions seem to affect several brands and models of wireless printers. Can I have it please click here to download the fix. Once the site opens, please click on the available hotfix downloadbutton. Please follow the prompts on the screen to install the hotfix. Once the hotfix has been installed please try again to print.  If printing still does not work you need to restart your computer to allow the Hot Fix to take affect. Once your computer turns please try again to print.

    Please reply to this message with the result of your troubleshooting. Good luck!

  • OfficeJet Pro 6830: MacBook Pro does not print wirelessly for Officejet Pro 6830

    I used to have an old HP Officejet 7210 who was once able to print wirelessly from my MacBook pro, but at some point, wasn't able to do wireless and had to print with usb connection.

    For Black Friday, we bought an Officejet Pro 6830 and on internet I downloaded the latest driver for my MacBook Pro and my windows laptop of wifes and our desktop PC. The mobile office and windows had no problem, but once more, I was not able to print wireless from the MacBook Pro. When I try to print wireless the printer dialogue indicates he's trying to deal with and then it says "the printer is currently in use". So I'll still have to plug the USB to print with this new printer is less than a month.

    I was able to print the wireless test page and he noted that the test page bypassed print drivers. In addition, I am able to go into the printer utilities and see how much ink, I have and the various settings of the printer but I just cannot print documents from applications wireless.

    Any help would be greatly appreciated

    Hello

    First of all, do not forget to reboot your router by unplugging its power for a while, then let it 2-3 minutes to reboot and restart the printer.

    Make sure that the printer is connected wireless and blue wire it light.

    Try now to go to System Preferences > print & scan and click on the sign more. you see the printer listed?

    May you had prior display the problem started with your previous printer? for example a new router, changes of settings, etc. ?

  • grayscale to offshore office 8600 pro won't print color

    A grayscale on for a couple of prints, but now off greyscaleis, 8600 pro office does not print color. A few color cartridges replaced lately. Also had to make a re-install because that wireless was not working

    Hi gbflater,

    I would like to allow you to print in color again. You print from a Mac or a Windows operating system and which version?

    While I wait for you, please use the following document, it can solve and no further action will be necessary. Printer cannot print black ink or color ink, or prints blank Pages.

    Fingers crossed!

  • 8600 pro won't print on both sides

    Product: HP Officejet Pro 8600

    Model: N911a

    Duplex unit installed

    Operating system: Windows 7 Home Premium

    The 8600 duplexer not to drive the paper during printing initial or simplex aside.  The paper is pulled a roll of picking directly above the paper tray until it reaches the rollers right behind all of the print head.  This group of roll, also known as the wheels is trailing edge of the journal once the first side printing is completed.  It's the wheels that "grow" paper in the duplex unit.  I suggest clean you the pinch group of roller with a Q-Tip and a little alcohol that they are cleaning the ink and paper dust.  See the video on how to clean the rollers (including the duplexer rollers) on the support Web site.

  • OfficeJet Pro 8600 more - won't print wireless

    Installed a new 8600 more printer.  To install it on my network.  My laptop sees the printer and scanning function will trigger and talk back to my laptop.  When I try to print, however, printing fails with the error "unable to communicate with printer."  Any ideas on how to solve this problem?

    Hi valledigna,

    Follow the steps below to uninstall and reinstall the printer.

    1. open Control Panel

    2. click on uninstall a program

    3 uninstall Officejet 8600 in the list

    4 restart your computer

    5. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    6 download the drivers and full software functionality, and then reinstall the printer.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-97846-2 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4323652 & sw_lang=.

  • MacBook Pro won't print on Officejet4215 after reinstallation of software! Help!

    Today, I have reinstalled my software for my officejet 4215 because it would not scan.  Now he scans and copies, but no matter WHAT I do, it will not be printed!

    I tried all the solutions on this site.  After deleting the printer in system preferences, I add it back.  It is successful, if I get a message saying "software is missing, may not be able to print.

    End of unintalling and reinstalling the software, the message "printer offline" and "fatal error" for each job.

    Help! I am going round in circles and do not know what else to do.

    Thanks in advance.  I'm on OS 10.6.8

    Make sure that your OS X is healthy:

    1. download and install Mac OS X 10.6.8 updated Combo.
    2 download and install the Apple for Mac OS X v10.6 HP printer drivers.

  • Unable to set up LaserJet Pro 1025nw to print wirelessly on a PC of Windows 8.1

    My HP CP1025nw printer will not work in my new laptop and Dell technical support is unable to help me.

    The indicator light (blue on top) flashes slowly.

    I have a NETGEAR router and it worked after that first implemented by a Dell technician.

    The printer works fine when I connect with the USB cable from the laptop.

    any suggestions?

    moon2

    Hey moon2,.

    Welcome to the HP Forums!

    With the indicator (blue up on one) flashes slowly, it means that the printer is not connected to your wireless router. When the light is lit in blue, this means that the printer is connected to the wireless network.

    To start, I suggest to unplug printer form the rear of the unit for 30 seconds, then plug the power supply back in. Then, you will need to reset the default settings. I've included the document "reset the printer to factory default settings".

    Once this step is completed, you will need to uninstall the printer software. I've included the document "uninstalling the printer software.

    Now once the installation is complete, you will need to install the printer software. When installing the printer software, you first need to connect with a USB cable when prompted, but you will be able to configure the parameters by installing wireless. I've included a link to "Full Feature software and driver".

    Please let me know if you are able to print wireless following the steps above.

  • hp4620: doc files Microsoft won't print wirelessly on hp 4620. EPrint diagnostic test page prints OK.

    Software: Microsoft Word 2003, SP3

    Hardware: Dell desktop

    Operating system: Win7 64 bit "of origin".

    Printer: all-in-one hp 4620

    Note: 'print page' and other wireless diagnostic ePrint tool work very well.

    Problem: Unsable of printing from Microsoft Word doc.

    Popup Error Msg:

    "Unable to communicate with the printer.

    "The print job failed because the printer is not connected or not available. Check your cable or Wi - Fi and make sure the printer is powered on and ready. »

    This problem may occur just after I just sent a test print the ePrint tool page.

    «# - hId-pgWebServicesSetup.»

    Summary:

    HP ePrint diagnostic tool works very well, including the test page.

    Printing from Microsoft Word Gets the error msg.

    NOTE:

    The same Word doc file prints with hp 8100, in the same room, using the same wireless ePrint network, as described above with hp 4620

    Problem solved with the firmware update.

  • PIXMA MG5420 won't print wireless

    I'm losing my mind.  I got my MG5420 PIXMA to print wireless, then something happened and I lost the connection. now, I don't remember what I did time changed so he can print wireless.

    Window using OS 8, port is the USB001 virtual printer port. The control panel of the printer to connect WIFI to router by pressing simultaneously on WPS router and an OK button on the machine, says they are connected, but my laptop says printer is connected connection/no offline.

    Can someone tell me how to connect my HP laptop to my printer?  I'm just freaking done with this printer.

    Your printer is connected to the network, but you need connect your computer to the printer via wifi.

    If it says USB then it is connected through the USB port.

    Reinstall the printer to print wireless.

    Here are a few Canon's PDF documents to help you.

    https://www.Google.com/search?SourceID=navclient&AQ=&OQ=MG5420&ie=UTF-8&rlz=1T4GGNI_enUS517US517&q=m...

  • C4780 won't print, wireless or USB

    There is, I changed the name/pw in my wireless network, and my C4780 printer, I used as a wireless device has stopped working.

    Today, I tried to reinstall the software to change the settings of the printer wireless and the installation wizard will not even recognize it when it is on a USB connection. I know that's not the cable or the computer, because if I install the driver without setting up the printer, it appears in Print & Fax in the system prefs. But it will not yet be printed via USB, and I can't understand how to set the wireless settings or the other.

    What should I do? It's incredibly frustrating, it is practically new and completely functional.

    I am running Mac OSX 10.5.8. I have reset the settings on the printer wireless, I uninstalled and reinstalled the HP software several times. I tried to change the name of the network to what it was, but (I guess that since I had already reset the printer's wireless) that no longer works.

    Make an another "reset network Defaults" configuration > network on the printer.

    Now reset the printer by turning it off, disconnect the power supply from the back of the printer (not pregnant), wait 30 seconds, plug in and turn on.

  • C4780 - won't print wireless

    Hello

    I spent about 2 hours until this installation and set up my new c4780. I ran the set up CD, everything completed successfully (but not the first time), including how to set up the wireless connection. However when I arrived at the end of the implementation process he said that was not the installation of the printer. He had not obtained at the point of telling me to unplug the USB cable (what would happen, they say).

    The result of all this is that it will print when connected to the pc through the cable usb, but if I disconnect the cable and try to print wireless, he said "the printer is offline.

    The wireless signal is present (blue light display) and the signal is strong.

    Can anyone suggest what I should do - not too technical if possible, although I am patient by following the instructions!

    Thank you.

    OK, you're in great shape.  The printer is connected to your router and you can see on your computer.  You are so far in front of most of the people and are almost cooked.

    I'll assume that the software is somehow loaded until the end (I could be wrong on this subject).  If so, we will manually add the printer:

    1. click on the 'Start' button--> printers and fax machines.
    2. under print jobs, click on "add a printer".
    3. click on 'Next' on the Add Printer Wizard window.
    4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
    5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
    6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
    7. under "Add Standard TCP/IP Printer Port" enter the IP address of the printer. Click 'Next' and then click 'Finish '.
    8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
    9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
    10. Add the name of print spooler, and then click "next".
    11. click on "next".
    12. click on "Next" and "Finish."

  • Color Laser Jet MFP M277dw Pro: frequently updated software

    I am the owner of a color Laser Jet MFP M277dw Pro. I get updates almost every week, and the software update is very strange. I'm clicking on the update system, it takes a lot of time to meet up with the text saying I'll remove the actual update or add another device. When I say no, thanks, I'll get a message saying that my update was successful (but only if I have to cancel this message). I don't understand why I have to go through this illogical question. Also, I don't understand why it is not necessary to update very frequently, especially when there is no explanation of the reason why.

    The two just exclamation points annoy me because I think that there must be a problem with the software, even if the printer works well.

    Sincere greetings

    Arne H. Wilstrup
    Denmark

    AHW

    Greetings @ahw,

    Thank you access the Forums from HP Support for extra support! I see that you have problems with updates of window for the printer software. I'd love to help you.

    Given that the printer works, I would say to hide updates.

    A poster tried to show or hide updates and it solved their problem.

    You can also give your feedback to Microsoft, and if all goes well, they will release an update to correct the function of the operating system. You can learn how here; Updates and feedback.

    If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

  • HP Color Laser Jet MFP M177fw Pro - Scanner Error 22

    I get the same Scanner Error 22 on the Color Laser Jet Pro MFP M177fw like many others have posted.  Tried uninstalling\reinstalling the software and tried the most common loading drivers but Scanner error prevented this piece of finish.  Support and I was told we would have to pay $49.95 for them to help us solve the problem.  We just bought this printer 5 weeks ago.  Is this all we can try?

    Thank you!

    Thank you for your response. This solution does not solve my problem. HP customer service had travelled me several tests (took about 20-25 minutes total) but ended up sending me a replacement printer. It arrived within two days and so far, the replacement works great. HP has also paid to have the original shipped in return. The process was fairly hassle.

  • Color Laser Jet MFP M277 Pro: Can I scan a document on the HP MFP M277 Color LaserJet Pro printer double-sided?

    Hello

    What I can and, if so, how to scan a document double sided on the Color Laser Jet Pro M277 HP printer MFP?

    Thank you very much

    Paul

    Hello

    No, it only supports printing double-sided, recto verso but scan copy not duplex from the Manual:

    http://h10032.www1.HP.com/CTG/manual/c04474163.PDF

    Kind regards.

Maybe you are looking for