m277dw: m277dw scanning network vs usb connections

Similar Questions

• HP M426fdn MFP - scanning with a USB connection for laptop possible?

  Can anyone confirm that scanning HP M426fdn will work if your computer is connected by USB instead of network?

  Trying to confirm this before buying.

  Thanks in advance,

  Brian

  Hi Brian,.

  Yes, you can use any of the printer by using a network connection or a direct USB connection to your computer.

  Be aware that this connection allow using one computer, not several.

  Shlomi

• Cannot configure printer; Fails to detect a network or usb connection

  Hello

  I recently got the printer HP Deskjet 3050 a and have been an absolutely terrible time operate. It worked for one night and then disconnected somehow. I wanted to set up a peer-to-peer network since I was in College and do not have a network of myself. Whenever I try to connect, I made sure to connect to the correct network for my printer (HP-Setup-7F-Deskjet 3050 a J611), but even when I do, it is not recognized. He invites then connect the USB cable provided, what I'm doing, but never, she acknowledges that the connection has been established, and therefore, nothing happens. I made sure that the wireless is on my printer and makes everything the site said I should. Please help, I'm desperate.

  Thank you.

  Note: I'm working with Windows 7 on a Dell laptop.

  Hi amandamday,

  New USB cables can be purchased at any store of technology such as Best Buy, Staples, or even Wal-Mart. I would like to know if the new cable allows to solve the problem?

• Question of USB connection? Office Jet 4500 g510n

  I have a HP 4500 g510n printer.  It works great as a home network wireless.  I noticed that there is a connection to printer cabe on the back of the case.  There is nothing in the mannual users on a cable connetion.  This printer may be connected to the computer with a USB printer cable?  Is the port to connect just one part of a multi-model standard case and not connected to anything for this model?   If it can be connected can manage both wireless and cable connection at the same time?  I have a pc I ' d electrician it but I have others who need to continue using the wireless.  Thanks for any information.

  Hello

  Any USB connection as part of its standard specifications of the printer support, it means that you don't connect the model 4500 with a USB wireless as well.

  Network and USB connections will not interfere with each other, you can use the printer with a USB connection to one of your PC and the network wirelessly with any other PC.

  Kind regards

  Shlomi

• My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years

  My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years - any changes made on the network wireless to our knowledge.  Printer works fine in USB mode on old Windows 2000 office.  Network sees the devive asked to detect devices.  Wireless to the printer hardware is perhaps not handshaking...?  Please let know us that he is a very curious pnnc.

  Windows 7 is updated as well as the print driver.  Thank you.

  Hello abir.

  Thank you for giving us the opportunity to help you with your concern for Windows.

  From your post, it seems that you cannot print from Windows 7-based computer.

  When you say "no changes made on the network wireless to our knowledge", which is the type of network you're talking about? (Workgroup, domain)

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  We will try the steps from the following link and check if this solves the problem.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  You can also check this link:

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Response with the State of the question, too, let us know if you need help with Windows problems and we will be happy to help you.

• HP Deskjet 3515: Connection HP Deskjet 3515 to the network without USB cable

  Nice day

  I just changed networks and the need to install my HP Deskjet 3515 to the new network but I can't find my USB cable.

  Is - it possible configure the printer on my new network without USB cable?

  Thank you

  GatZza

  Hello @GatZza,

  Welcome to the HP support forums.

  I appreciate that you try to put your Deskjet 3515 on your network wireless without router.

  I would like to help.

  I got the following information from the Printers manual.

  To get started with Direct wireless printing

  1. to use live wireless, you must turn on Direct Wireless Control Panel and get the wireless
  Direct name and password if you have directly on wireless security:
  a. on the home screen, tap on wireless and then select settings.
  b. If the display shows that the wireless is turned off, select live wireless, then on (No.
  Security) or we (with security).

  NOTE: HP recommends that you turn on Direct wireless security. If you turn on safety, only
  users with the password will be able to connect wirelessly to the printer. If you disable security,
  anyone with a Wi - Fi device to the printer WiFi range will be able to connect to the printer.

  c. Select the display name to display the name Direct wireless.
  d. Select Show password to display the password Direct wireless if you live wireless
  Security on.

  2 from your computer wireless or mobile device, Wireless Tower, find and connect wirelessly
  Direct name, for example: 3510 HP-Print-XX-Deskjet series. If you have Direct wireless security, enter
  Direct wireless password when you are prompted. Then print as you normally would from your computer or mobile
  device.

  Open the integrated via Direct wireless Web server

  1. from the home screen, press the wireless button, and then select settings.

  2. If the display shows that the wireless is turned off, select live wireless, then on (No Security) or
  On (with security).

  3. from your computer wireless turn wireless on, to search and connect on behalf of live wireless, for
  example: series HP-Print-XX-Deskjet 3510. If you have Direct wireless security, enter in the wireless
  Direct password when you are prompted.

  4. in a browser supported on your computer, type the following address: http://192.168.223.1.

  When you reach the EWS printers, you should see an option to run the Wireless Setup Wizard.

  Run the wizard, and then follow the prompts.

• I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

  I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

  original title: third party INF problems

  Hi Paul,.

  ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

  You can see the following article on how to set up a network.

  How to set up a small network with Windows XP Home Edition (PART 1)

• I can't seem to Windows wireless on Lenovo laptop to recognize a USB connection and turn on the wireless radio.

  I use a USB connection to my mobile phone for my internet connection. I want to use wireless mobile radio to connect other devices, but the window wireless services does not recognize that I am connected to the internet. What can I do here, gurus?

  Hello

  Please contact Microsoft Community.

  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have any security software installed on the computer?
  3. have you made changes on the computer recently?
   
  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.
  1. Click Start, type services.msc and press to enter.
  2. Locate the autoconfiguration WLAN service, double-click to open its properties window.
  3. on the general tab, change the startup type to automatic and click on the Start button.
  4. click on apply, then ok.
   
  Try to connect to the wireless connection and check the result.
   
  If the service still does not start, run the System File Checker tool to scan the computer for the corrupt system files and automatically correct. To run a sfc scan, try the steps mentioned in this link: http://support.microsoft.com/kb/929833
   
  For more information on the wireless settings, see this link: http://technet.microsoft.com/en-us/library/bb878035.aspx
   
  Let us know the result of the above troubleshooting steps so that we can discuss in detail and help you further.

  If the problem persists, proceed from the link below to fix this problem

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Reply to the post with an up-to-date report of the issue so that we can help you further.

• Photosmart C309 printer: change to usb connection

  I currently have a wireless connection to my computer.  How to change that to a USB, wired connection?

  Hey @dac71, welcome to the Forums of HP!

  I understand that you do not want to change to have a wireless connection to a USB connection between the printer and the computer. When you connect a USB cable, the printer automatically installs the correct driver and since you have already paid it works wirelessly, it would be seamless.

  If you're having trouble, and you have a Windows operating system, run the HP print and the doctor Scan with the USB cable connected and it will help: www.hp.com/go/tools.

  If you have a Mac and you need assistance let me know.

  If it meets your needs, please click Accept as Solution button below. If there is anything else I can help make sure you respond back and I will do my best to help!

  See you soon!

• Can I use USB connections and wireless on OfficeJet 6700?

  Only, we have installed a new Prime Minister to 6700 JO e-all-in-one by using the USB, one of our workstations. Is there a reason why we cannot set up wireless also, or do we first abandon the USB connection?

  I love the reliability of USB connection, but I would like to than others in the Office to use the features of the printer/scanner/fax too.

  Hi kreed,

  Yes, you can have the printer connected wireless and USB at the same time. Follow the document below to install the wireless printer. Have a wonderful day.

  Installation of the software of the printer on a wireless network or network (Ethernet) cable

• I can't communicate with a parser to network through the connection to the local network.

  Have a USB-ETHERNET connection to a network Agilent Analyzer.   I ping the instrument with the cmd prompt.   But I continue to get stuck to the implementation of a network via MAX connection or try to connect through connections Labview VISA.    I get the error "insufficient location information or the device or resource is not present in the system.

  
  

• use the usb connection or wireless connection?

  I have windows 7 64 bit.  My printer is Photosmart all-in-one model D8110a.  It came with an antenna for the wireless connection. I can't find a place to screw the antnna in. I have a modem to work with band wifi.  Once I've set up wireless can I use my usb on my desktop connection.  I have desktop and I have a mini I - pad. I would like to print from my I - pad and my office.  I do no network, just personal crochet patterns, recipes, etc. Any help would be greatly appreciated.  Thanks, MissPiggie

  MissPiggie

  Hello

  I did some tests about 18 months back to connect printers, USB connection or wireless at the same time with a few computers (only 1 connected via USB) and the tests worked. I can't find the model of your printer, so I can't say more.

  Kind regards.

• Install HP Officejet 5740 & USB connection problems

  I recently bought a HP all-in-one OfficeJet 5740 printer for my desktop Dell XPS 8700-(Windows 8.1) and attempted to install, using the USB connection option. I was informed by the instructions of configuration to go online to a Dell website for the latest version of the installation software to download if I had access to the internet. I have DL'ed software and it apparently installed OK-(aucune erreur ou quoi que ce soit pour indiquer qu'il n'a pas abouti). Once finished with the installation of the software, I got to the window option connection-(wireless, usb cable ethernet cable). I chose the option of usb cable, however after having to then connect the USB cable to the printer and the computer via the usb cable, it tries to connect, but alerted me, stating; "Failed connection to printer, printer was not able to connect successfully via the usb cable. I tried this several times-(par moi-même et remote assist avec Support ordinateur Dell). I had the same problem last week when he tried with my old HP Officejet 6100, which I wanted to replace. I ran the program of doctor printing/scanning HP on the 5740 and it lists the printer and the software installed, however the HP printer install lists assistant the complete software package for the printer is not installed and some basic features drivers may be missing or damaged. Also when I go into Control Panel, then devices/printers, it displays the icon of 5740, however after rt - by clicking on the printer icon, instead of the regular menu that comes up to the top-(showing the complete properties, select this printer as the default printer, etc.), it displays a menu of smaller selections very-little (who don't understand not the "select as default printer"). I tried downloading the printer software two ways-(via the HP website on line 1, and then click the installation CD supplied with the printer, the same results. The printer was purchased 11/15/2014 and seems works very well-(tirages test-page, page d'alignement, etc.), but I can't print anything, and apparently it can not connect via the USB-(* j'ai acheté un nouveau câble usb 2.0 hier et, utilisé pour écarter la possibilité d'avoir un mauvais câble). My Dell computer is only 10 months old, and I upgraded to 8.1 Windows back on 25 October.  The USB ports on the computer all seem to work properly when connected to another USB device other than the 5740 printer.  What is the software apparently is not fully installed, with some missing drivers or, possibly, USB drivers should be updated? Any help would be appreciated. Thank you!!!

  Thanks for responding, but I was able to get the printer installed with the help of diagnostic, remotely in line with my computer manufacturer support staff. He was determined to be a software problem because of a recent update of Windows 8.1. Thanks for the effort!

• Printer wireless HP 7510 goes - 4 station XP wireless network, w / 1 connected PC.

  Printer: HP 7510

  Network: multi-user wireless through the DLink DI-632 (a PC connected to the router)

  Address configuration: printer uses static IP - DHCP (192.168.15.240) outside

  The printer config: each computer has static IP set in the Control Panel app, using the IP address.

  Operating system: XP (Service Pack 3)

  Other devices: Ipad, Xoom and Kindle Fire (work all use ePrint)

  Protocol of network security: WEP (we are out of the country)

  Network configuration: main router, as well as 2 (wired) access ports; currently using channels 1, 5 and 11 (again, we are in the country and have little competition for channels)

  File Sharing: All machines on a network have a player to 'share' open, accessible with passwork.

  Scenario: Wireless computers seem to stay connected for several days to a week at a time. (Restart us every week, just like a POS)

  Computer that is connected to the network loses communication with the printer a couple of times a day and needs to be rebooted in order to re-establish the connection.

  When this happens, other machines continue to print and scan, without any problem and the wired machine continues to have its name displayed in the SCAN on the printer control panel - but the printer won't talk to her.   All network functions, including internet and intranet access to SAP of the printer is always available.  I noticed that if I go in checking ink levels, however, that the ink control software behaves differently.

  Normally in the application of the ink status, there is a small icon of 'work' with 6 points. When this computer is connected properly, it will start to jump around the circle, showing activity, get 41% and then view ink status info.  When connecting the printer and the computer does not work, the icon of 'work' will go to a few percent, then go to the information page printer, showing the brand, model, serial number, etc. level firmware.

  In all cases to date, reboot (without any other action) brings the connection of the printer and the computer to life - until the next time.  I will try to find any other model of this behavior, just cannot identify it again.

  I started with the installation of regular vanilla, but then all the computers on the network would always connections, about every 45 minutes. Using the info on this forum, I eliminated the dropouts for these printers and got static IP solutions (we did this anyway for the years with net lending machines).  It's the last machine which "falls" it seems that some piece of software that are required HP is 'stall' or began to hurt, but I can't see a model, same check and note the different software used locally on the computer and various Web sites visited. So far, no reason.

  I hope the guru of the HP with access to the source for the software status "supply of ink" can take a look at what is happening and why always go to 41% and then view the status of the ink (when connected) and then just stop a few percent and view the status of ink (when it is not connected).

  Thank you, in advance,

  Jim

  Don't know if this can help, some of the information could be relevant:

  http://support.HP.com/us-en/document/c03149924

• X 200 wireless problem - detects available networks, but cannot connect to them.

  Hi all

  I have a weird and annoying problem. My X 200 can detect wireless networks but refuses to connecto to them.

  It's a brand new computer that I just received.

  Some info:

  ThinkPad X 200 7454-2HU, running Vista x 64.

  Downloaded latest drivers installed, all using the autopilot to Lenovo download application.

  The driver has detected in the Device Manager is: Intel Wifi Link 5100 AGN.

  There is no problem with the wireless network (the other computers connect to it without any problems).

  I tried to cancel the option "n", leaving a "b/g", but it did not help.

  It is problematic that only one device in Device Manager, and it's "Controller of Bus SM" (cannot understand what it is and update windows or Lenovo update does not solve this problem).

  When I use "Intel ProSet/Wireless Tools" diagnose, I get:

  Test equipment: managed (wireless hardware is enabled)

  Pilotass. Driver is loaded. NET w5v64 Versio: 12.0.0.82

  Radio test: past. The radio is on.

  Scan Testass. There are 12 networks available to connect.

  Association test: failed. No partner.

  When I look at the statistics, it seems that the card receives bytes (nothing is sent).

  What do you think? Is it a hardware problem or software?

  No idea what can be done if it is a software problem?

  S.