M30x-118 DVD not read and write all formats

Similar Questions

• Satellite M30X-165: Mat * a UJ - 831 S is not read and write any DVD

  Hello

  the next problem is sticky on the laptop Satellite M30X 165 with the burner Mat * a UJ - 831 S: it can read and write CDs, but is not able to write them to DVD or even read some of the ones I've burned and also read in the same drive. Even at the start of the DVD, it does not start from the recovery DVD, the player starts and slows down very quickly.
  Without doubt, it must be put at the service of repair or someone has other suggestions?

  Could you please tell me how long the repair takes (I know what it takes to install the desktop temporarily used).

  Thank you

  Post edited by: DerSeher
  Using burning software, it detects the DVD, but invite you to an "error of calibration power (037303).

  Hello

  If you cannot use recovery media, I guess that the drive is defective and must be replaced.

• NEC DVD +-RW ND 3650 a unit will not read or write, all diagnoses tried did not work.

  DVD +-RW ND 3650 a unit is not reading or writing to the media. I tried the diagnosis MS-Fix - it, but he could not solve the problem. I am running MS7 Home Premium SP1 (build 7601) on a Deminsion of Dell E520 with 4 GB of RAM with 2.13 Ghz Intel Core 2 Duo processor. I ran MS-Fix - it, but it didn't Fix it. Mgr. said device the device works correctly, it is not. I checked for updated drivers and the drivers are up to date. I checked the internal connections and everthing looks good. Before installing a new optical drive can anyone lead me to a solution?

  Hello

  Don't forget to check the diagnosis with Dell Support, their documentation online, and ask for their
  Forums about known problems. Dell has a few good methods of troubleshooting on their site.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  =======================================================

  Even if you did some of them before you begin please from the top and work

  down, jump, nothing, until the issue is resolved or these methods have been exhausted.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• MY DRIVE E IS NOT READING AND EJECT ALL MY DISCS

  I HAVE VISTA HOME PREMIUM 32-BIT FOR COMPAQ PRESARIO LAPTOP. I TRIED TO INSTALL MY ANTIVIRUS NORTON DAY HAS BEFORE ITS EXPIRY DATE AND AS SUDDEN DRIVE MY EI DVD STOP WORKING AND LOCK ME UP SO THAT IT CAN NOT READ ANY CD OR DVD ROOM. WHAT I DID IS A COMPLETE SYSTEM RESTORE, BUT I STILL HAVE THE PROBLEM... IF KNOW ANY SOLUTION FOR THE PLEASE PROBLEM HELP ME I APPRECIATE I'M GETTING CRAZY HERE... Thank you very much!!!

  Hello
   
  This happens usually if the device driver is defective or is mainly due to the virus currently running on the computer.
   
  To correct corruption driver, downloaded and run repair Microsoft: http://support.microsoft.com/gp/cd_dvd_drive_problems
  To remove the virus currently running on the computer, visit the following site and full service scanner: http://onecare.live.com/site/en-us/default.htm
   
  After launching the online scan, try to check the functionality of the CD/DVD drive.
   
  Post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Satellite 1410-801: Drive is not read and write many CDs

  Problem with Toshiba DVD - ROM SD-R2212 Drive on a Satellite S1410-801.
  Help, please!
  My drive doesn't read many CDs and I can't write any CD too?

  Hi Wade

  The fact is that readers cannot read all cd or dvd media.
  You should first check different media from different manufacturers.
  As far as I know, you should find a list with the media CD and DVD tested and supported in the user manual.
  I use the TDKs and I m very happy

• "google chrome can not read and write in its data directory '... WHY?

  I used free Windows cleaning tool; theres now load problems. When I reboot works very little?

  [Moved from comments]

  Where did you get this "tool"?

  You have not provided enough information.

  HOW TO ASK A QUESTION:
  http://support.Microsoft.com/kb/555375

• DVD RW drive (D :) will not read or write DVDs)

  My computer can not read and write DVDs and CDs.  Please tell me how to solve the problems.

  Thank you very much!

  Sue

  Hello

  Someone helped me to fix my computer, the problem disappeared.

  Thank you very much.

  Sue

• HP DVD Writer does not read or write DVD, but only the CD

  My HP DVD 1135t burner does not read or write DVD but only the CD. What is the problem? Please help me.

  CD/DVD players use different lasers for reading/writing DVD from the CD.  All indications would point to your laser DVD as having failed.  You could try to remove your drive and install it in another computer to see if the problem follows your player or your computer, but my bet is that the drive must be replaced.

  HTH,
  JW

• Could not read or write DVD-RAM

  Even if my material indicates that he can read and write DVD-RAM, all of a sudden I can't recognize discs dvd - ram, that I stored things on front. I followed one of the forums and has released Service Pack 2 and that worked for a while and then stopped working again after a few updates have been installed. I tried again to SP2 and then pushing out, but not joy. No idea how to fix this? I went through Fixit MS and the thing Upper and Lower filters, still no joy.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CD DVD WILL NOT READ OR WRITE. D: IS NOT ACCESSIBLE DUE TO THE I/O DEVICE ERROR

  Toshiba Satellite A - 105 Windows XP media center management with a MashitaDVD/RAM UJ - 841S drive will not read or write CDs D States is not accessible. Cannot be performed because of an i/o device error. However, I can play movie CD via the media center.

  Does anyone have a solution? Thank you!

  Hello

  ·        Was there no hardware or software changes the system just before this problem?

  Please try to follow link below to solve the problem with the DVD player:

  http://support.Microsoft.com/kb/891894

   

  Note: After a repair in method 2 in the link above, make sure you put the computer to start as usual as shown in method 2 in the above article.

  Hope this information helps you solve the problem. Let us know if it helps.

  Thank you and best regards,

  Ramata Thakur

  Microsoft technical support engineer.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• CD and DVd won't read and write

  My Cd and Dvd players will not read or write anything...

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?
  3. what happens when you try to play a CD or DVD? You receive an error message?

  Step 1: Run the fix it tool in the following article and check.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Step 2: Update driver CD player or DVD and check.

  Reference:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Changed all to read and write but little again "Please check protection rights or permissions of parent directory.

  "After effects warning: the directory could not be created." Please check the rights of protection or parent directory permissions. I changed all to read and write. I uninstalled and reinstalled. What's next?

  Hello

  Please try following the steps.

  (1) open Finder

  (2) in the menu bar, choose go > go to folder

  (3) type "~ / Library" and select go

  4) once in the library folder, select Preferences

  (5) right-click on the Adobe folder and select information

  6) click on the padlock at the bottom right to allow changes

  (7) to extend the deferred part & permissions at the bottom

  (8) change the privileges for staff and everyone & read/write

  Note: To assign the authorization right click on adobe folder and click on Get info... A window will open. Then click on the lock symbol to allow editing. Then click on sign + to add your user name. Then change read only to read and write. Then click gear icon on the bottom and click on apply to the elements included and click ok...

• I can play Bluray discs but can not read or write any DVD or CD.

  I can play bluray disc but can't read or write all other dvd or cd discs. It is said that there is no disk of course. light in the drive, it starts flashing, then it stops.any ideas. Thank you

  original title: combo drive problem

  Sounds like the Blu - ray player should be repaired or replaced.

• Brander DVW/RW can read and write DVD double layer dvd

  Hello

  I would like to know if brander DVD/RW can also read and write the DVD DL(dual layer) dvd.

  or I have to buy for that special brander!

  Johan

  What is a "brander DVD/RW?   Support double layer DVD depends on the material.   Try to identify the make and model of the car since the Device Manager and find its specifications.

• Read and write to a port

  Hello

  I tried to read and write in a port using .net 3.5 example codes that are supplied with the controller. Examples\DotNet 3.5\Digital\Generate Values\Write Dig channel and channel digging reading. Regardless of the value that I write I always get a positive output reading and all the bits are high on the channel. To reporoduce the problem simply run two programs at the Dig sametime writing and reading Dig Channel channel. Set the port to Dev1/Port0 / line0:7 in the two tests and write a negative value for any or all channels. When you read the values, the values are all positive. I tried using the example of code in VB and I get the same results. Please note that the regulator is working properly when I run the test, measurement and automation. I looked at the Forums and I found the post to:

  http://forums.NI.com/T5/Measurement-Studio-for-VC/basic-questions-about-PCI-DIO-96/m-p/242296 The name of the article is basic questions about PCI-DIO-96 and it says that the values written should persist. Any ideas on what I can do wrong?

  Thanks, Magued

  This is a LabVIEW and an example VB that illustrate the use of tristate to switch between the input and the output. The output setting will allow you to drive the liine and re-read what you wrote. The read setting will allow you to read an external digital signal. Please excuse the fact that these are examples of rough and informal.