M3910 i3 540 3.07 GHz Tower RAM upgrade possible? -Maximum RAM per slot for my model?

Similar Questions

• I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  This was after the 3 beep error and I couldn't restart the Mac with one of the 2 GB of Ram into the lower slot.

  Is there a way to test if the top housing is faulty or just dirty?

  Thank you

  svchild wrote:

  I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  Yes, the MBP will work with a single module of RAM installed, but there will be a slight performance decrease.  A MBP 2012 will accept a module of 8 GB RAM.

  Is there a way to test if the top housing is faulty or just dirty?

  Install each RAM module individually in each slot, leaving the other empty.  If the two RAM modules work in a slot and not the other, the slot is faulty.  Sometimes the adjustment screw can resuscitate the slot.  If this is not the case, make an appointment at an Apple store for a FREE evaluation.

  Ciao.

• Pavilion HPE h8 - 1360T: Max RAM per slot (4 locations)

  I'm upgrading RAM on my 1-1/2 year old h8 - 1360t.

  On the page "Product Specifications and configurable Options" (http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c03425388 & DocLang = in & docLocale = en_US & jumpid =... , under Hardware Options - memory, it says "must select one of the following options:...") 16 GB (4 x 4 GB) PC3-12800 DDR3 (PC3-10600 on this system turns)' (the only 16 GB option - maxed out for WIN7 64 bit).

  In addition, in the support page "HP Desktop PCs - the upgrade memory (RAM)" (generic - non-specific to any model) (http://support.hp.com/us-en/product/HP-Pavilion-HPE-h8-Desktop-PC-series/5258496/model/5261720/docum, under "Verification of the quantity of memory can be added to your computer model", it says "to find the amount of memory per slot, divide the maximum amount of memory that the computer can hold by the number of memory locations of the motherboard. Usually, this is the maximum amount for each type of memory. For example, if the computer is able to contain a maximum of 4096 MB (4 GB) memory and the motherboard has four memory slots, install 1 GB (or less) per slot. »

  When I check the options of 'Memory' on www.crucial .com, the only 16 GB option it gives is 8GBx2.  Can I do trust what is Crucial says about it (which seems to contradict what the HP options & specifications page)?  I think that the answer is Yes - that HP doesn't care. and options page is just saying how it would come if I had ordered with maxed out at 16 GB RAM - but thought I would ask before ordering memory.

  Thank you for responding to this.

  I dug a little further on the Crucial site, and it seems that the 8GBx2 actually works:

  Recommended for my computer:

  

  And here's the review of one of the examiners:

  

  The reason, I was a little skeptical about what the HP standard sheet said for the computer I had before this one, HP said a certain maximum size of RAM (below what the operating system should be able to manage).  There was a post on the HP forums who said you could use the larger RAM size (until the operating system can manage) in this model computer.  I tried and it worked fine.

• Can I put my 24 inch Dual Core IMac (early 2009) 4 GB ddr3 1067 Mhz RAM to 16 GB ddr3 1600 Mhz (it says maximum of 8 GB for this model)?

  Can I upgrade my 24 inch Dual Core IMac (early 2009) 4 GB ddr3 1067 Mhz RAM 16 GB ddr3 1600 Mhz? I read that it only can be upgraded to a maximum of 8 GB but I'm not sure whether that was when they were sold or if the maximum capacity of the computer can take.

  Thank you for your help,

  Jacques Bizot

  You can upgrade the RAM, but 16 GB ddr3 1600 Mhz is NOT designed for your iMac. Please use the RAM specifications correct, iMacs are extremely sensitive to the RAM and require the correct specifications and high quality RAM. Advanced users on these forums tend to recommend Crucial (buy directly from them) or if you are in the USA, RAM from OWC (www.macsales.com).

  Do not buy RAM in your store, the local computer or cheap RAM at best, it's probably a waste of time and at worst it will simply not work.

• Can I upgrade a windows professional xp 2002, SP2, AMD Athlon (tm) XP 1800 + 1.50 GHz, 480 RAM for windows 7?

  I have an old computer with this syntactic:

  Windows xp professional 2002, service pack 2,

  Athlon (tm) XP 1800 + 1.50 GHz, 480 RAM AMD

  And I would like to upgrade to windows 7, but I can't use Windows 7 upgrade advisor, because it doesn't have internet acess.

  If it is possible?

  Thank you...

  480 MB of RAM?  No, don't do anything useful.

• HP COMPAQ 8200 Elite Micro Tow: Can you tell if this system has slots for SSD or hdd adapter necessary - & gt; SSD?

  Can you tell if this system has slots for SSD or hdd-> ssd adapter need?

  WIN INITIAL 7pro

  i5-4-core - 16GB - RAM - fresh install [new 1 TB HDD] 8.1pro win 10pro Win

  HP COMPAQ 8200 Elite Micro Tower

  P / N:XY139EA #AB7

  PURCHASED 07/03/2012

  For w10pro c: / recommend reinstall to ssd or migrate ssd or even is...?

  SSDS all have sons the same size and holes threaded on the bottom and sides.  They all use the same fine metric threads live short (short, so they don't lower).  These screws must come with the adapter, and I live in general using the lateral holes.  Parts of the adapter have threaded, 3 holes and you will use the back ahead and away from those for channels of the drive Bay.  If you look at each side of a standard 3.5 "HDD, you will see the same same spacing holes.

  Some jobs need the SSD to shift to the left so the orientation of the SSD SATA power and data ports match exactly where they would be if the current drive was a 3.5 "HARD drive clutter.  An example is the drive in a Z620 of drawers which accept 3.5 form factor devices "and slides of drawers in the deep part of the case and automatically mesh with ports of power/data SATA back inside.

  Jobs that fuel just a loose cable and the data cable for the SSD is really doesn't matter much if the SSD is an adapter which keeps it more centered or offset to the left.  I've seen cases where a disk HARD 3.5 "given in the lower Bay and a centered SSD is in the upper drive Bay and there was nearly not enough cable length to reach easily shifted left for drives staggered in the Center.  You can see in the photo below that the Garland of feeding on the HARD drive has two unused SATA power below connectors, and there is not a lot of room between them.

  The card you chose seems good... solid metal.  For the HP 8200 Elite CMT I have access to screws 4 total special 6-32 UNC silver HP threaded screw threaded back ahead and away from the screw holes on both sides of the adapter, and then you use the extraordinary end threads metric short screws mentioned above to fix the SSD to the adapter, as shown in the pictures of Amazon.  These HP silver screw 6-32 no metric I'm talking using Torx or flat screwdriver and their leaders are trained to slip into the channels of the drive Bay.

  There are also other designs which are designed specifically for some HP workstations that include mounts insulation rubber with the sliding mechanism.  I don't think you have that... Here is a picture of eBay one of the 8200 Desktop Elite CMT demonstrating the existence of space on the left for 8 of these silver screw to store, which 4 are missing and used on 3.5 "single drive, you see there.  Don't throw those... they are not something, you can go to Ace hardware and buy.

  

• HP 15-d045nr: how to decide what ram to choose for upgrade?

  I have a HP 15-d045nr - and I'm looking to upgrade the RAM.  I'm looking for the essential site and its gives me four different options, how to choose which one is best?  Its a small price difference... Thanks for the help in advance.

  http://www.crucial.com/USA/en/compatible-upgrade-for//HP-15-d045nr-TouchSmart

  Edit: Im also open to places other than this website, no matter what, would be preferable.

  Hello

  Crucial does not give you a complete picture. Yes, your machine uses normal i3 processor so it supports 16 GB of RAM (8GB slot) and still only once 1333 MHz or 1600 MHz RAM because the CPU supports only those:

  http://Ark.Intel.com/products/65700/Intel-Core-i3-3110M-processor-3M-cache-2_40-GHz

  Kind regards.

• I want to improve my Acer Aspire E5 - 571G - 57CS of 4 GB of RAM DDR3 L for a 8 GB of RAM. Is this possible?

  And if the answer is Yes, then the warranty service would free it will affect my warranty? In addition, should what kind of RAM I look for if I want to upgrade? Aries will be added to the existing RAM and it will replace it?

  I'm sorry for so many questions, my English and my ignorance when it comes to upgrading a laptop. And is all what I should know about upgrading RAM as it might damage the data on my disk, etc. ?

  Notes:

  I still have the warranty and the stamp is still there.

  Data sheet:

  • Intel Core i5-5200U 2.20 GHz
  • NVIDIA GeForce dedicated 820 m with 2 GB of VRAM
  • HARD DRIVE 500 GB
  • 4GB DDR3 Memory (RAM) L
  • Windows 10 Pro (i think)

  I know not if Acer will modernize under warranty, you must remove the motherboard to increase the RAM, the installation of CPU - Z to find out the exact your RAM specifications, then buy with timing and characteristics and to update yourself, if you are not sure to dismantle get performed by a technician on site, you can find the cost of this upgrade for your support of Acer local as they can do for one, compare prices with the quote from your local technician.

  You will lose all the data from your hard drive because of the upgrade of RAM but I tell reflect you to back up the entire system on an external hard drive using Macrium or similar utility.

  This is to show you how to upgrade and what is at stake:https://www.youtube.com/watch?v=rmsFDi_qsnQ

  This is just one example to show how to find the upgrade for your laptop and you don't need to buy Crucial memory, any brand works as long as they match the same characteristics as your current RAM.

  http://www.crucial.com/USA/en/compatible-upgrade-for/Acer/Aspire-E5-571g-38vf

• is 3 GB of ram any good for games?

  Is 3 GB of ram any good for games + desktop + web navigation + watch videos etc...

  (with dual-core Intel pentium @ 2 GHz and Intel hd graphics card)

  (operating system-Windows 7 64 bit)

  Also, Intel integrated graphics will almost certainly produce images low rates/resolutions for games. Other uses will be fine.

• 2 slots for ram, or I can use only a single slot?

  Hello..

  IV ' e bought 8 GB of ram for my MBP 2012 has 4 GB of memory.

  But I totally forgot that she has 2 slots for ram!

  so you can use only a single slot? or I have to buy another ram?

  Thankss

  For best performance Mac need pairs of corresponding RAM modules, swap or buy more is recommended all things being equal. I would however expect sentencing of incompatibility performance much smaller than the benefit of the upgrade beyond 4 GB, so you could run with 8 GB in a slot and the original 2 GB in one for 10 GB total installed.

• How many slots for RAM, model HP 250 G5 (W4M85EA)?

  How many slots for RAM, model HP 250 G5 (W4M85EA)?  What is the maximum amount of RAM supported HP 250 G5 (W4M85EA)?

  @Frodo9911

  Two memory non-customer-accessible/extendable module slots

  Supports up to 16 GB of RAM

  Your manual here.

  http://h10032.www1.HP.com/CTG/manual/c05087748

  REO

• RAM and battery for Tecra A4-168

  Did he now someone if there is a large capacity battery available for my Tecra A4-168 (12 elements), the part No. or the Web site? And what are the exact specifications of the RAM for this model?

  Hi kaffka

  As far as I know, that this unit is compatible with the PC2700 DDR - RAM modules
  The exactly memory modules are:
  PC2700 256 MB (PA3311U - 2M 25)
  PC2700 512 MB (PA3312U - 2M 51)
  1024MO PC2700 (PA3313U-2M1G)

  Here the details for the battery:
  Battery Pack (Li-ion, 12 cells, 8600mAh) high-capacity. Part #: PA3400U-1BRS

  Best regards

• Re: 1 GB of RAM / update BIOS for Satellite 1110

  Hello

  I ordered 2 x 512 MB of RAM at CompuRAM. According to their information 1 GB is possible for this model. According to the user manual only 512 MB is possible. As normally CompuRAM information is right (maybe necessary BIOS update), I tried.

  But it does not work. I can only use 1 x 512 MB.

  Does anyone have information on RAM update for Toshiba Satellite 1110 (model PS111E-003DN-GR/S1110-Z16)?
  Could help update the BIOS?
  How to find the update of the BIOS in the Toshiba homepage (model 1110 does not exist)?

  For any help thanks!

  Thomas

  Hello

  I found the info that this notebook can handle with 512 MB max.
  Sorry, but the BIOS update is unable to help.

• Satellite Pro 4320 - can I use 256 MB of ram in slot A or B?

  Can I use 256 MB of ram in the slot A or B or 128 MB maximum size?

  Memory module 128 MB is a size that can be used in a slot.
  As I remember the unit supports the 64 MB internal memory and 2 external slots for extension of memory.
  The device supports max 320Mo memor 64 MB + 256 MB (2x128MB)

• I want to replace the DVD-RAM UJ-846 for Qosmio G20-127

  Hello

  I want to replace my carpet * a DVD-RAM UJ-846 of the G20-127.
  Someone knows his apare part # and any sugestion wich RAM is compactables for my machine and better plase to get?

  Hello!

  If you want to replace your CD/DVD drive, you should look in your user manual. It should be a list of compatible drives that work with Notepad. Check it!

  The new RAM should be a SO-DIMM DDR2-533. The part number for 1 GB is PA3411U-1M1G.

  Finally and most importantly the best place for spare parts is the authorized service provider. They order all the original parts of Toshiba and the Toshiba site, you can search for the closest.

  Good bye