M40-110: error Power saver

Hello world. I own a M40-110

Can someone pls help me with the following:

Lately, I get the following error. "power saver fatal error occurred 0 x 0" any idea what this means?

Also ever since that time, my computer starts very slowly. Splash screen takes 3-5 minutes to open and once I have my screen is supposed to be up and indicator disc HARD running only turns blue and my screen gets frozen.

going to go crazy I bought this computer a month ago...
Help, please
Thank you


Try to recover your operating system with the recovery CD.
If this problem of still images, I suggest you contact the ASP.
If your laptop is only a month, your warranty will cover all replacements.
But first check if it s something wrong with the operating system.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite L10-270 - error Power Saver, utility


    I have a Toshiba Satellite L10-270 and because no standby power utility has been installed on.

    Then I looked for the Toshiba Power Saver, utility and try to install it, but I was unable to make it work. The battery is very low, I really need this software to work.

    Sometimes I get a message:

    "A fatal error has occurred. The program will end.
    "Code: Ox7E.

    And sometimes the message:

    «Cannot be opened because you do not have access rights to use «Toshiba power saver»»

    I hope you can help me, all brands have a power management utility work, I was hoping that it was the same for Toshiba. I hope!

    Any solution, a way to run the Toshiba Power Saver or any other software that could replace it.

    I have another question, where can I find the phone numbers and e-mail technical support or service after sale?

    Thank you.


    The energy saving was not preinstalled on this unit because this utility is not supported on this device (Satellite L10-270).
    It would be very interesting to know where you found this tool?
    I put t I think that this energy saving will not work properly because it was designed for another unit. In this case, you must use the Power Options of Microsoft Windows that you can find in the Panel

    In addition if you want to contact technical support please visit this site. You will find detailed information.
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/csg_national_entry_page.jsp?service=EU&from=http%3 A / / www.toshiba-europe.com/

    Good bye

  • Satellite A11-998: fatal error Power Saver - code: 0x7e

    I recently bought a Toshiba Satellite A11-998. I upgraded the operating system of Windows XP MCE to Windows XP Professional. As some of the drivers were not picked up, I was download the latest drivers from the Toshiba site, but when I install the Toshiba Power Saver, utility, I get the following error;

    "A fatal error has occurred. The program will end. "Code: 0x7e.

    The only option I is 'OK '. When I start the machine and Windows journal, I was invited with the same message, even, when I try and uninstall the energy saver utility. Is it possible to completely remove the utility, or can anyone suggest how to solve the problem. Any suggestions much appreciated.

    See you soon

    It seems that there is no general solution for this problem.
    I found some comments on the similar problem, and it seems that the Toshiba recovery CD installation will eliminate the error message.


    But how did you install the entire operating system? Did you follow the installation instructions on the page of the Toshiba driver?
    The order is very important and necessary if you want to install the Toshiba applications on your operating system.
    I also discovered that the laptop uses Power saver power saver utility and driver.
    I think you need to first install the driver and utility.

    But everything should be described in the installation instructions

  • Fatal error Power Save, utility 0 x 51 on Satellite M70

    I just joined my M70 to a domain (SBS 2003) and get this message when I connect to the domain.
    If I was able to connect to the account of local user on the laptop then it works fine.

    If I go into power options in the control panel and select a different power mode then the error disappears but I can't select TOSHIBA Power Save plans in the combo of plans.

    Help, please

    See you soon

    Maybe the power saver utility and power saver driver are not installed for all the user accounts on the M70.
    Or all user accounts are not allowed to use power saver utility and driver power saver.

    On the Toshiba driver page, you will find the Toshiba Power saver utility and the driver of Toshiba power gain.
    Both applications must be installed and run together.

    > If I go into power options in the control panel and select a different power mode then the error disappears but I can't select the TOSHIBA Power Save system in the combo of plans.
    It is clear. If Toshiba power standby mode will NOT be chosen in the Windows Power Options, then you will not be able to use the Toshiba power saver.

  • Satellite Pro A100 PSAASE: error Power Saver and LAN? After downgrade to XP

    I have a toshiba satellite pro A100-psaase!
    I could not find this model on the toshiba site, so I chose the A100-psaas software.

    The laptop came with windows vista. I have it downgraded to windows xp, has chosen the psaas model so that I can download the drivers.

    I have 2 problems: the first is the eve of power software, it does not work. Start windows every time I get an error in the energy saver. I can not uninstall.

    My second problem is, that a windows pop who found a network controller and I can't find any software or driver for it. So in Device Manager, an exclamation point on the icon of the network controller.

    The funny thing is that I have internet and all.
    I can't find a solution to these two problems
    Thanks again


    You have chosen the correct unit. The satellite Pro A100 PSAASE is the same model as PSAAS.
    I put t know why the power gain error appears, but for most of these errors occur because the tools and utilities have been installed in the wrong order!
    Seems that the installation instruction has been placed on the page of the driver Tosh! Read and follow the installation guide lines! Proper installation is important and necessary.

    The LAN drivers are also published on the page! There are 2 different versions. Try them both!
    The laptop supports a Lan Intel Ekron-R 82562GZ chip. Compatible drivers, you can also find on the Intel page!

    Good day

  • Satellite L30-106: Power Saver 0x7E error

    Hi all
    I own a Toshiba Satellite L30-106. I got it from Windows Vista to Windows XP pro, I installed all the Xp drivers provided by the Toshiba site.

    Everything is going well except for the Toshiba Power Saver utility, I can't install it, it still gives this error: error Power Saver 0x7E. Same thing happens when I want to uninstall it. How can I solve this problem?
    Thanks in advance


    I hope that you have installed the power saver right!
    The laptop is one of the series PSL33E. Therefore, you should choose the drivers and tools for this series!

    In addition it is very important to install the driver Toshiba and utilities in the right order!
    Then open the installation instructions and follow the lines of this guide!

    Please make sure that you have already installed "TOSHIBA common Modules or / and TOSHIBA Hotkey Utility" ahead!

  • Toshiba Satellite Pro M30 & Power Saver stop error


    I am struggling with this problem for months... the latest version of Eve on my toshiba satellite pro m30 running windows xp with service pack 1 installed gives a message box with an error message when the stop and I'm unable to eliminate this error. Unfortunately, I can't consider reinstall the system from scratch, because there are many other applications installed and I can't lose the settings for them. I read the forums and realized I'm not one of the problems with toshiba power saver. I'm even lucky to successfully at startup started it! Yet, it hangs at shutdown. It's pretty boring. also, I downloaded all the latest updates of this site for my laptop, including even the bios update.

    I would like the opportunity to be able to download the version without toshiba this site energy saving bug, and I'm sure many other people would appreciate the patch too!

    any comment on that?



    If your laptop is installed correctly it should work well. All the software has been tested. The only reason for your problem may be additional software that you have installed later.

    It is also possible that it may be caused by an Antivirus application. Maybe an application runs in the background? There are many reasons that may be responsible for this problem.

    If you reinstall your Notebook of recovery CD it will not work properly. It is very unjustifiable to write on some versions bug-free. I sometimes have problems with BONES, but almost always after using some freeware.

    Good bye

  • Fatal error of TOSHIBA Power Saver 0x51A on Satellite M115-S3094


    By the subject, that's the problem. Unfortunately, my computer which is Toshiba M115-S3094 has just recently a fatal error with the Toshiba Power Saver program like 3 days ago. The Toshiba Power Saver not only does not want to work, but it is even more present in the taskbar. First, I went to the properties to be able to restore the program, but nothing helped.

    Then I tried to uninstall and then reinstall the program, and he always gave me the same problem with the error: the program ends. Error fatal 0x51A. Right now, my laptop does not on the mode of power supply Toshiba but on common Windows system, such as the presentation or the laptop.

    So I need help to restore the Toshiba Power Saver. I run Toshiba M115-S3094 with Windows Media Center Edition.


    Satellite M115 seems to be a Toshiba laptop because of the 5 at the end of the number.
    In this case, you must use the Toshiba on the Toshiba site energy saving us. Did you?

    Maybe you used the right utility electricity saver, so possibly that some registry or system files keys are damage in this case install the new OS for the Toshiba Recovery CD would be desirable.

  • Satellite A100 - How can I fix the Power Saver error at startup?

    Hello!! friends

    Can someone help me? I have Toshiba Satallite A100 series with XP SP3 at start up I get an error for maybe 2 weeks ago. My mistake: a fatel error occurred this program will terminate code: oxo (Tosheba energy saving)

    How can I fix this error on my laptop?

    Thx a lot in advance



    I think you should try to reinstall Toshiba Power Saver. The latest version, you can download the Toshiba site:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Before installing the latest version, delete the old version in Control Panel. Then, restart the computer and install the latest version on the Toshiba site you downloaded.

    Good bye

  • TOSHIBA Power Saver 0x7E error


    It's the short history of XP on my Satellite A200 - 14 d:

    I can't stand Vista, therefore 2 or 3 days after the purchase of my laptop and try Vista, I decided to install my WinXP Pro. At first, it was REALLY hard for me to find drivers. I even installed some Tohiba not who, by the way worked just fine. Then Toshiba began to publish its own non-experimental pilots and I was happy. Everything worked well. After almost a year I was "forced" to reinstall my OS (once again: WinXP Pro). Everything went according to plan, and after 30 minutes, I was greated by the Windows XP Welcome screen. The first task was to install the appropriate drivers.

    Well, very well. I downloaded the latest drivers before reinstalling and kept them on another partition, I was ready to go. I opened the file TXT "new facility" and began to install everything on this list (which of course I downloaded from the Toshiba site). I installed all the drivers in the line, they must be installed (although I don't really know what that some of them may be of no use to me, like a fingerprint, since I have no such thing, but fine - I can't live without a few megabytes :)) until the famouse "Power Saver Utility" has come.) I read in many forums here on this problem, but I never found a solution :(:(:(

    When I tried to install the utility, it spits out an error message with code 0x7E (?). Whenever I boot my OS, this triumph of message on my desk ruin my mood :( I tried to uninstall it (although it is not completely installed - the only thing that shows something on this subject is an icon of the control panel which, pressing on, says that I don't have sufficient rights to access the file (even IF I'm in administrative Mode) and registry keys, which does nothing (I removed it and always appear the messages that I mentioned above)).

    I tried to remove it, but once again with error 0x7E message at the beginning of uninstallation. I even REINSTALLED my OS again and again by installing Power Saver mistakes occur :(:(:( This surprises me a lot, because I've never had such a problem before even the fact that I have not followed the installation instructions. I really need a solution to this. I want to install Vista and the recovery disc. I would if I knew there was no average athor, but I'm sure there is because of the fact that I had no problems before.

    Yes, everyone throws - help. Because without energy saver, my laptop is like your desktop PC, that is--needs to stay connected with alternating current :( And it is not appropriate for a laptop.

    PS: I forgot to mention - no change in the BIOS has been done, although I don't think that this has nothing to do with my problem.


    Have you tried two versions of power saver on the Toshiba download page?

  • TOSHIBA Power Saver - fatal error OX50


    Recently, I have a big problem, my Toshiba power saver.
    It triggers a fatal error OX50 and I tried reinstalling several times and it doesn't work.
    Please how can help me solve this problem?


    Fatal error with Power Saver hmm I read a few threads on similar problems and it does seem that the completely OS restore Toshiba recovery CD could help settle the energy saver

    But may I ask if you install all the drivers in the correct order?
    Usually the installation instructions are always placed on the page of the Toshiba driver and it s necessary to follow this guideline.

  • Re: Satellite L300 - 17l - Toshiba Power Saver gives me error after installation

    When I bought my L300 - 17l all the drivers of Toshiba drivers download pafe worked out well.
    Recently, I have reinstalled my OS XP and now I started to install all the drivers again. LAN has been authorized, WLAN was ok, the display driver has been authorized.

    But when I get to install Toshiba Power Saver (URL: [http://support1.toshiba-tro.de/tedd-files2/0/pwrsav-en-20080519172104.zip]) it gives me this error (it shows the error or after I cliquerai on finish the instalation or before installation began, as you can see in this screenshot)-[http://www.picvalley.net/v.php?p=u/2381/9078672171740560287.JPG]

    I later tried this - i go ot Control Panel and open Toshiba Power Saver, but then it gives me another error: "CANNOT be opened because you do not have access rights to use 'TOSHIBA Power Saver'.
    I reinstalled my XP again and it still gives me this error... I wonder what could be the problem... Please help me


    Satellite L300 - 17L belongs to the PSLBCE series.
    I chose this model number and found exactly the same energy saving that you tried to install.
    So I guess that you have chosen the right Power Saver utility for this model of laptop.

    But did you also install the common Module?
    This software must be installed first before installing other tools.
    Update you the Win XP for the State?

    Check it!

  • Re: Toshiba Power Saver fatal error. Code 0 x 0

    Hi all

    I recently received this new notebook Tecra M10 (model PTMB0A - 00M 001) replace my laptop to existing business. It came loaded with Windows XP and built by the standard portable computer generation.

    It works fine except that at startup I get the error message "a fatal error has occurred. The program will end. "Code: 0x0.

    I did some research and I think that the original version may have been compromised, because there aren't has no files in the directory C:\Program Toshiba Saver except for a TPSTrace.log that has this message inside: "a fatal error has occurred. The program will end. "Code: 0x0 rental: TPwrSave.cpp (140). The Power Saver software claims to be v7.11.00.

    I downloaded the latest version 7.11.10 (for XP) and when you try to install, the software asks you if it can uninstall the existing version and as it tries, the fatal error code: 0 x 0 occurs which always uninstall, and I suppose that reinstall it. It seems a pity to restore from CD lose all data and other software that is very good because of this software pooey to save energy. Given the original installation was probably standard, there is no guarantee that even if I do a system restore on CD the same problem not re - manifests.

    Is there a way I can do XP think software is deleted (it seems to be absent physically, but XP think it is present) by forcing an uninstall. I can then try to reinstall it to see if I can do better than what it was when it was delivered to me. Otherwise, I'd be more than happy to just work without it, for the trouble it causes.

    Thanks in advance.


    You must delete it from the registry.

    Try CCleaner first, it may be able to remove the bad registry for you keys. (google for "CCleaner")

    Otherwise, run Regedit, and then search for "to sleep". Make sure that you delete, in order to ensure the results refer to Toshiba Power Saver.

    PS. back up the registry first. You can do this by creating a Restore Point in Windows. (Panel of-> system)

  • Error message during the installation of Power Saver on Satellite A200


    I have an error message when you install Power Saver on PSAECE A200 error-14 D: 1612 the installation source for this product is not available. Verify that the source exists and you can access it.

    What could be the problem?

    Thank you.

    Thank you for this precision...

  • Satellite P200: Cannot open the Power Saver - fatal error in Windows XP Home edition


    I just installed XP and I came across a problem that is boring. When I finished to install Power Saver and the driver, I got a message saying fatal error and I thought it was because I haven't restarted. Then, after only a day or 2 later I went to the energy saver and he said cannot open because you don't have access rights to "Toshiba Power Saver.

    Is there a solution to this


    I put t know if this is a solution but try my proposal:
    First of all, remember that you are registered as an administrator or make sure that you have administrator rights.

    Remove your old system energy saving. You must remove the driver and utility.
    Then reinstall the computer and clean the registry using the freeware like CCleaner.

    Then install the driver of saver of power and after reboot the new install standby power plant.

    I hope it helps

Maybe you are looking for