M40X: Wireless has stopped working

Hello world

Please can someone help. My wireless connection just stopped working. I have a Toshiba M40x, a router belkin g (F5D7231uk4) and my sevice provider is NTL. I checked with NTL and all is well. I took the cable that connects the modem to the router on the router and connected to my PC laptop and the internet works fine.

I also reconected it cable and run another ethernet cable from the router to my laptop computer and again internet works fine. When I right click on the little icon wireless and research of wireless computer sometimes shows my router, but nothing happens when I click conect. External wireless switch is turned on.

Please note that I'm not amazingly well with PCs, so answers in English would be fine.

Hello

@fraziola: Sorry, but I m bit confused. The ethernet cable is plugged in and you want to connect to the router via WiFi? Or you have disconnected the cable and then try to connect the router?
However, in my opinion, you need to reconfigure the router. Check all the settings of the router. In addition, you will need to create a SSID.
I put t know if you use a WLan configuration tool and more, but if not to check the properties of WLan. In the wireless network tab, you will find an option to use windows to configure my wireless, this option must be enabled.
Then, you can use the lives option wireless networks.
If you use encryption, then you must also enter a good code.

Believe me, the WiFi network is a very complex issue and if you have no experience so ask someone who has more experience of these things.

Tags: Toshiba

Similar Questions

  • Scroll wheel on the mouse Microsoft 3000 wireless has stopped working?

    I bought a Microsoft Wireless 3000 Mobile in purple mouse, manufacturer #6BA-0026 last month and now the wheel has stopped working. I can't move the mouse. Only the buttons work, this mouse is less, is about a month. Cannot take back to the store because they one day 14 return policy, so now I'm stuck with a mouse that doesn't work. Is it possible to get the scroll wheel to work. Using the button takes a lot more movement and it is easier to use the wheel. Why my mouse was working only for a month? Do I have to spend more money to buy another mouse? Is there some type of downloading software that I can use to make this mouse works correctly.

    Hello

    1. have you made changes on the computer before this problem?
    2. did you try to use the same mouse to different computer and check?

    Step 1: Run the fixit from the following article and check.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/

    Step 2: Uninstall and reinstall the software mouse and check.

  • Satellite Pro M70 - wireless has stopped working

    I have a Satellite Pro M70 and the wireless stopped working. The yellow light lights up for a few seconds for the machine to wake up but then turns off. I rebooted several times, but that did not help. In your reply please clarify abbreviations - thank you!

    Post edited by: boston1

    Hello!

    Have you tried to update the driver WLAN? You can find it on the Toshiba site or portal driver WLAN:
    http://APS2.toshiba-tro.de/WLAN/

    Have you checked for yellow exclamation marks Device Manager?

    Check if the laptop WLAN switch lights up and I can disable/enable WLAN with FN + F9 on my Satellite phone.
    Check it!

    Good bye

  • Satellite A500 - 15N Wireless has stopped working

    I bought my A500-15N in last October and had no problems at all with wireless connectivity. Last night when I was surfing Internet it suddenly stopped working (literally between two pages on Wikipedia) and I can connect is no longer. When I try the troubleshooting option, I still see an error 'wireless capability is turned off. I not made any changes to my router or laptop, so I'm not sure what could be going wrong.

    Is the wireless adapter fuck and I need to get this replaced? I tried the combo FN + F8 but which does nothing either.

    Hey,.

    Is the WLAN card still listed in Device Manager correctly and have you tried another key FN if combination work?
    Usually the WLAN card can be disabled with the FN + F8 key combination you wrote

    In your case I would recommend updating the driver WLAN. You can download the latest driver WLAN here:
    http://APS2.toshiba-tro.de/WLAN/

  • Satellite P100 - 429 LAN wireless has stopped working

    I had a satellite P100-429 during about three weeks, the wireless card was working fine until yesterday. Today I turned on the laptop, but I can't connect to my access point.

    In fact the laptop can now find any wireless network at all.

    Can anyone help?

    Have you checked the common things like a status of Wlan card in the device, the Wlan router configuration manager, etc...?
    Also check if the Wlan card switch is set to on. Further, you can try to fix the WiFi connection.
    To do something like that, he must go to "network connections", right click on the WiFi connection and choose repair.

    Do you use 3rd party WLan configuration software? If so, please check if the windows have configuration option WLan has not been activated.

  • Re: Wireless has stopped working on my Equium L40 (PSL41E)

    Hi guys.

    With the help of my laptop wireless this morning and all was fine, then all of a sudden, it loses the connection.

    Tried different methods to restore the link, update driver downloaded but no luck.

    The wireless light on the front of the laptop no longer turns, so I was wondering if there was some kind of internal problem.

    I am house bound and rely heavily on my WiFi, so if someone could suggest a solution to the problem, or has any suggestions, which would be excellent, but please keep in mind, I'm not very technical interest, you may have to explain things in detail!

    Thanks for your help.

    Karl

    Hello!

    You have activated the WiFi connection with the hardware switch of the laptop? The switch is on?
    In addition you can disable/enable the WLAN function with the FN keys. Therefore, you must press FN + F8.

    And what driver have you installed? If you update the driver, you should look on the Toshiba WLAN portal. There, you can always find new driver versions:
    http://APS2.toshiba-tro.de/WLAN/

    Good bye

  • WRT54G wireless has stopped working

    I got a Linksys WRT54G for several years, and during this period, he worked a lot.  I use it last night, and all of a sudden, my internet connection come fall.  Initially I thought it was just a problem with my internet, but after a few determined troubleshooting my rooter is the problem.  I checked the following:

    1. the Internet works when the computer is directly connected to the modem.

    2. wireless works, can connect to the rooter configuration screen

    3. I can also connect to the rooter Setup screen when connected wireless

    Each device seems to work on its own, but when I put the rooter and modem together, I can't access the internet with a wired connection or wireless.  I have tried the following to fix:

    1 power bike all devices

    2 reset all cable connections

    3. reset to factory of rooter

    4. firmware re-installed.

    I am out of ideas and have the feeling that my rooter may be toast, but I would appreciate any suggestions.

    Who is your Internet service provider...?

    Have you power rolled all devices including the router and the modem of your network...?

    What is the ip address of the modem... get you?

  • Satellite L300D - Wireless has stopped working.

    Hello

    I use the laptop connected to internet wireless very well for some time now, both at home (via a router) and at the University, but until recently, when I switched the laptop on and he ceased to connect to the internet.

    The icon in the taskbar indicates that it is connected to a network, but at the local level and does not connect to the internet, the wireless switch shows that it is on and if the button is the fn + f8.

    I contacted the technical support to the router, as I had initially some worries with it a fair all the time, but they seem to think that this is a problem that the laptop itself because it connects to the internet very well if the cable is connected to him directly, but when it was via the wireless, the router was not find the device at all.

    I was wondering if someone could give me a helping hand to sort out the situation.
    Thanks in advance.

    > The icon in the taskbar indicates that it is connected to a network, but only locally and does not connect to internet

    In this case the refresh IP address could help.
    If you want to note the same problem in the future and then start the console (using the CMD command), and then type the command: * ipconfig / renew *.

    Usually, this helps.
    In my case, it always helps!

  • Hotstop Dell Wireless has stopped working

    hotstop does not start. y at - it something I can do about it.

    You need to download and install Dell Wireless WLAN Card Utility.

  • Wireless has stop working. Recently installed new Norton anitivirus program.

    Tremdnet 11 g TEW-452BRP

    Hello
    I suggest you try to disable the temporary security software and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    It will be useful.

  • All of a sudden my wireless mouse has stopped working. The mouse is on and relatively new.

    Tonight my mouse (Logitech) wireless has stop working.  This happened once, and one of my friends told me to remove the receiver, shut my computer down and put the mouse back in.  However, I don't remember the exact steps he gave me.   I tried several different things, but none seems not to work.

    Hello

    What is the model number of the mouse?

    Method 1:

    I suggest you run the Microsoft fixit tool and check.

    Hardware devices do not work or are not detected in Windows:

    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2:

    Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more

    http://support.Microsoft.com/ph/7746

    Method 3:

    Mouse, touchpad and keyboard with Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=Tab03

    I would suggest you also contact the Logitech support forum and check.

    http://www.Logitech.com/en-us/support

  • WRT54G - wireless just stopped working on all devices

    Hi all

    I had my WRT54G for a few years and have my hard wired office (to the router) and 2 laptops and an ipod, wireless successfully for 2 years. Woke up this morning and nothing connects wireless, find that the router is intermittent, and when it does, it cannot establish a connection with her. I can connect the devices via the network cable directly to the router and everything works fine, it's just wireless which has suddenly stopped working.

    I tried "' turning and the new" disable the WEP password changing WEP etc but nothing seems to work. " IM at a loss as to why my all just network/wireless has stopped working?

    Any ideas?

    You must update the firmware of the router, then reset and reconfigure the router.

  • Pro L10: After using a wireless mouse, the touch pad has stopped working

    Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

    I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

    Can you help me?

    Hello

    It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
    I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
    I guess that you are having regular problems with a USB mouse.

  • My PC communicates wirelessly with my C309a HP, but Hp solution Center has stopped working.

    My PC (Dell XPS 9000) communicates with my C309a HP wireless printing, but the Hp Center solution has stopped working. If I should not be able to use all functions wireless?

    I get a message error "HP Solution Center can work because your device installation is not complete. Please connect the usb cable or re-run Setup from the instattation for a network installation CD. "When I put the installation disc to remedy the problem, it tells me that my current software is the last, while it will not be updated. When I go to the center of update, it tells me I have the latest version of the software.

    Hello

    Try these:

    Click the icon to the Start Menu > programs > HP > HP Photosmart c309a > add a device

    With this, it will find the wireless printer and reconfigure the parameters; Just follow the guests. After completion, try to open the HP Solution Center.

  • HP Photosmart Wireless B109n-z: my scanner has stopped working

    My printer and copier work ok but the scanner has stopped working and gives me an error message-

    "The analysis cannot because another program or computer using the HP netwoked imaging device. Try again later.

    The device is not on a network, and there is no other users outside of myself using my laptop.

    Hello

    You can try this link?

    http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-wireless-all-in-one-printer-series-B109/3794623/model/3794624#Z7_3054ICK0K8UDA0AQC11TA930C7

    Thank you.

Maybe you are looking for