M4345 will not update the firmware

One of my clients has 5 M4345 mfp.  The most recent, built around 2010, will accept the 48.306.1 firmware update.  The older models (which have parallel ports, not the USB ports) are at the level of the firmware 20050607 09.022.3 and will not accept the upgrade.  Using the lpt1 port, I managed FTP'd and copied the file from the rfu.  The ACM indicates it is the upgrade, then restarts, but the firmware is not updated.  I also tried the Utility.exe through the lpt1 port.  Yet once the ACM indicates it is the upgrade and that it recharges, but firmware is the same.

Bottom line, I'm trying to get rid of the question of OpenSSL.  Any help will be appreciated.

There are two different models of the 4345. The first was just a plain 4345 and the second was the M4345. The firmware is different between the 2 models. The link below is the firmware for the old model.

http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=415209&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dds_73628_15%257CswEnvOID%253D54%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

Tags: HP Printers

Similar Questions

  • M610 will not update the firmware

    Hello

    We have several m610 that is wrong BIOS 6.2 to 6.4. Neither will they updat the LCC f/ware or drac f/ware.  Keep saying that the image is not the right one. And also, "unable to download image" and "failed download Dell update package. RED006") (from OME). I tried to download the image several times, also tried to update via the USC and the generic iso file. When you transmit bombing with the messages above.

    The servers have been physically removed and reinserted.

    At this point, I guess we have a corrupt piece of firmware on these boxes which causes pain.

    Is there a way to reset or are there several repair firmware patches that can be judged?

    THX,

    John Bradshaw

    Good to hear, it was probably due to the system being pretty behind on updates and new packages required a new version.

    The support page you would find in Embedded Server Mgmt, as shown below.

    You would download those for each of the servers, check out the files that you did before, then get the img files.

  • Windows will not update - "the location where updates WIndows stores the data changed.... »

    original title: windows will not update - please help

    I get the message "where Windows Update stores data has changed and should be repaired" How can I change this so that I can update my computer?

    How to reset the Windows Updates components?

    http://support.Microsoft.com/kb/971058>

    Download and Save the fix it 50202 from the page above.

    Close all the open browsers and programs prior to execution of the fix it.

    Since the downloads fail, when run you the fix it choose its default mode when you run it the first time.

    When he finished, check if download updates now.

    If the updates are still not download after you run it, then run it again and choose his Aggressive mode.

    Then reboot and see if the download updates now.

    UTC/GMT is 19:07 Monday, December 26, 2011

  • Will not update the modules in CS4

    I have a licensed version of CS4, but when I installed it on my new computer, it does not update the modules beyond X.0.0.

    Try direct updates

    https://www.Adobe.com/downloads/updates/

  • E280 crashes at startup, will not be reset, will not update of firmware

    I had a lot of problems with my e280 v1. I tried a lot of different firmwares. The last of them is e200fw01.03.01beta and it worked for a few months, but now it crashes at startup and nothing that I makes no difference. Is there a way to remove the firmware. I tried with the latest firmware recovery mode, but it is not just. I know that it would take a few tests, but 17? Usually, there is a 'last resort' thingy on devices like this, but I can't find anywhere help, please!

    If this has been answered before, please point me in the right direction.

    Ah, the dreaded Hebrew Beta firmware!

    Go to anythingbutipod.com and search for «Hebrew Beta»  There is a thread there with instructions on how to restore your Sansa to normal operation.  The problem is that some files are renamed in the Beta firmware, making the move a pain.

    The thread he explains the process in detail.

    A change that I recommend is to download a copy of the firmware 1.02.18 or 1.02.24 on the Web of SanDisk site, rather than a source third.  The two libraries of firmware are available here.

    Once the files are renamed correctly, you can load the original firmware.

    I like the Lil Monsta.  It is more important to have a Sansa running.

    Bob

  • Windows will not update the screen resolution and the color depth

    Out of the blue today, my Windows XP installation had its color depth and screen resolution back to the lowest setting and whenever I try to update it refuses to put up-to-date.

    I even try to restart my computer and a bubble appears downstairs offering reset the color depth and resolution to my automatically.  When I click, it appears as if he's trying to return to normal, but again once nothing happens - the colors and the screen resolution is still at the lowest setting.

    Can any ideas on how I fix?

    Hello

    Here are some things to try to fix it.

    Change the screen resolution.

    "How the resolution screen on Windows XP"

    http://pcsupport.about.com/od/Videocards/HT/screenres.htm

    You can also right-click on an empty desktop > properties > settings > it the slider bar allows you to increase the resolution > Apply > OK > agree in the next window, etc.

    If that fixed it, have damaged you graphic drivers.

    Access the site on your computer or the manufacturer of the graphics card > look for a driver download Section > search for your model number and operating system > get graphics / video / Chipset Drivers (depending on how it is formulated) > download and install.

    Change the screen resolution.

    You can also try a system restore before all these problems started:

    "How to use System Restore in Windows XP"

    http://pcsupport.about.com/od/fixtheproblem/HT/system-restore-XP.htm

    See you soon.

  • Windows will not update the list of printers

    When I select Add Printer witout a CD (ie. windows update) it fails and says try again

    See: http://windows.microsoft.com/en-US/windows7/Install-a-printer

    and http://windows.microsoft.com/en-US/windows7/Automatically-get-recommended-drivers-and-updates-for-your-hardware

    It is always recommended that get you the drivers for your hardware from the manufacturer site, in this way, you get the right driver and the updated driver.

    So, if you try to install a printer without the CD, go to the manufacturer site rather than trying to do it through Windows Update.

  • I paid for a subscription and my software will not update the licensing.

    I can't activate my one of my CC products?

    Have you signed and reconnect since Adobe Creative cloud once and I tried CC apps sign?

    https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

    If so,.

    1) go to C:\Windows\System32\drivers\etc and locate the file named hosts inside the folder etc.

    Copy 2) guests of the file on the desktop and even open with Notepad.

    Let me know if you see any Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?

  • Edition on DVD after using the movie menu.  Text of scene selection will not update after clicking on the advance button.

    I created a movie and used the Menu movie option.  I have 24 scenes.  After having engraved on a DVD the DVD will not update the text or the images listed by backstage after clicking on the button to move to the next series of scenes. However, if you click on the scene it will take you to a scene that should be on a page.   I use first elements 13 Windows 8.1 with 16 GB of RAM.  I tried different a few times and still have the same problem.  Thanks for your suggestions!

    I found my problem.  I got the Motion Menu button checked on each marker of the scene.  After that take-off it works perfectly.

    Randall

  • Gigashot K40HE - update the firmware on the SD card does not work

    Hello

    IBought a Gigashot K40HE 2 years and everything was good until he stopped keep the date in mind.

    I had the assistance of Toshiba phone told me to update the firmware with the following procedure:
    1. prepare a formatted, empty SD card.
    2. Insert an SD card to the card reader. Copy the firmware file
    (file name must be "psd.bin") in the SD card. Make sure that the new firmware file is copied to the SD card.
    3. Insert the SD card into the DV.
    4. Insert the battery in the DV.
    5. Insert the adapter in the DV. (dual power supply)
    {color: #ff0000} 6. press on "Power button" to power. Then the LCD displays 'FWUPDATE YES OR NO'. Select "YES".
    and press 'OK '. The DV will update automatically the FW. {color}
    7. after that the FW update completed. LCD display will show "OK". And then, will auto power off.

    Everything was good until 6... The DV starts as shown. It justs starts normally, asking me to set the date as every time I turn on my DV.

    I tested with a SD card that usually work on other devices, so I guess that the card is not defective. It's a card SD transcend 1 GB 45 x. And I know that the card is seen by the DV, because it creates folders on it for recording photo or video.

    Has anyone an idea to help me sort this out?

    Best regards
    Ozhades

    Hello ozhades,

    before you start an update of the firmware, it is very important the battery completely full.

    After the battery is fully charged please do the fw update again.

    Best regards

  • The first graphing calculator HP will not update. Stuck at x 2 + y2 = 1

    I tried to update my brand-new first HP Calculator graphic using a version update of the HP connectivity Kit.  The update failed and the calculator will reset but not exceed x 2 + y2 = 1.  I tried to use the following manual method of a post on Educalc and the usbtool will not load the update.  ANY HELP, PLEASE!

    Of HP first Firmware update manual

    1 download the firmware files and unzip into a folder

    2 wipe Calculator (optional)
    a grip on the keys of F, C and O while resetting calculator
    b to the menu, press 4.3, then enter
    c when the format is complete, go to step 3

    3 given to zero Calculator (back button) while holding the button "Symb".
    (poster or screen update tool ARM or recovery mode)

    4. connect the computer using the USB cable
    (wait of recognize the device USB)

    5 run usbtool.exe

    6 select the check box 'Auto update '.

    7. click on the button "Update".
    (blue bars will show that the unit is updated)

    8 calculator reset

    Note: If a step fails, please proceed to step 3

    Please, do not update your HP Premium using Parallels on a Mac Desktom.  I tried and the drivers of USB Port would not allow the update completed successfully using HP Connect, the Update.exe program or the application of usbtool.exe.  I managed with the help of an old laptop on XP using the USBTool.exe application using a native PC environment.

    I will say that I am running OS X 10.10 Mavricks Beta 2 on my MAC, but I don't think it's a problem, although I will know Parallels.

    If you use a MAC, borrow a PC (ugggh) to update your first HP.

    NOTE: the usb tool is displayed as part of the ROM for HP Premium updates on educalc.com at: http://www.educalc.net/2336439.page

    David

  • LaserJet Pro M1217nfw booting is not after the firmware update

    Hello

    My configuration:

    HP LaserJet Pro M1217nfw (USB connection)

    MacBook Pro (mid-2012) running OS X Lion 10.7.5

    My Odyssey:

    The HP scanning software included on the CD is rudimentary to say the least. In particular, it don't will not let me scan multiple pages and combine them into a single PDF file.

    Tried to scan printing & scanning with ImageCapture, an excerpt, and the pane in system preferences: they see any of the MFP.

    Uninstalled HP, reset printing system software, downloaded and installed http://support.apple.com/kb/DL907 according to the instructions on http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Mac-Lion-Scanning-Multiple-Docs/m-p/159... no luck.

    Downloaded and installed the latest HP software http://ftp.hp.com/pub/softlib/software12/COL32660/Im-80903-6/LJM1130_M1210_MFP_Full_Solution.dmg

    Installation goes OK, then asked the installer to update the firmware of the printer and I foolishly said yes.

    Result: the printer will not be in service longer. At the start, it displays "then to initialize... "with the Green (ready) and amber (caution) of fires, then LCD turns off, then"initializing... ". "all over again, to infinity. Needless to say that the HP software or the Firmware utility see the device more and in system preferences, it is listed as "offline". In a Word, it is bricked.

    Of course, I could use some good advice. Thanks in advance.

    Solution in another thread:

    http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/LaserJet-Pro-M1217nfw-non-functional-after-firmware-upgrade/m-p/2323767#M36922

  • Favicon of the reserved site will not update

    A few days ago, I changed a favicon on one of my sites and still my favicon in bookmarks Firefox remains the old favicon with constancy and will not update to the new! I tried "forget history" for the site and looked where Firefox stores the bookmark info, but it of like a .sql file and is not easy to change.

    No idea why my bookmark favicon is not / will not not to date and how I can get it to update?

    Hello
    Thank you! The code worked and this is a solution to the problem.

    I was not sure of the answer "not defined", but when I visited my favorites all favicons had disappeared!
    Then I visited my site with the new favicon and finally he updated the favorite icon in the bookmark! Good!

    Now that I visit all sites in my bookmarks to restore all the favicons to all my favorite sites!

  • iPad Pro will not install the last update of iOS, says that it is not connected to the Internet. It is connected!

    MY iPad pro(9x7) will not install the last update of iOS. I get the message it is not connected to the Internet, but it is connected! I have f

    I istalled the update on my iPhone 6 without Ant problem. I tried switching off and on again, but the result is the same, it will not be installed.

    I just read a post that Apple released the 9.3.2 update for iPad 9.7 Pro. Cannot confirm this, but not me. See post by Phil.

    iPadPro9.7 said that current operating system 9.3.1 will not update 9.3.2

  • My firefox is the latest version, but will not update

    My firefox is the latest version, but will not update

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

Maybe you are looking for

  • Satellite A-L50-18r - WiFi 802.11n standard is not available

    I have a Toshiba Satellite L50-A-18r with a Qualcomm Atheros AR956x Wireless Network Adapter wich suports wifi 802.11 b/g/n, but no more than 15 to 20 Mbps to 50 Mbps, I can't send my router. Also, in advanced options for the wireless adapter there a

  • Equium L20 - need to TI 1410 PCMCIA driver

    Every afternoon I read the instruction of installation for an Equium L20 and seeks this TI 1410 PCMCIA driver 5.1.2600.0 (mother tongue)...It is not listed in the download page and google'ing for an hour or two, bring back some of the garbage. Can an

  • HP 250 g3: Bluetooth Hp 250 G3

    Hello everyone I have a problem with my laptop, after I formatted and installed win7 can not run the Bluetoothcan someone please suggest me what who and where to find the driver? HP 250 g3 N2840 2.33 ghz intel celeron WiFi card ralink rt3290

  • Some sort of Bug, files corrupt, I don't know, but nothings working

    Basically, I can't run my antivirus software...  It gets about 80% and then stops.  Is like his still to go but goes no further after 30 minutes.  These scans are generally high for 15 minutes.  And it never seems to stop in the same place or the pat

  • ipconfig media disconnected

    using windows 7 command prompt, I get media disconnected, how do I get my IP?