M475dw multifunction color HP Laserjet Pro 400 - 49 Service error

Similar Questions

• LaserJet 400 ColorMFP M475dw: Problem of power cord for m745dw multifunction color HP LaserJet Pro 400

  I'm trying to find the number of pieces of the electric cable.

  My warranty expired on 6 December 2014.

  My power cable is flaky.

  When I move a bit the the line cord with the output plug, my printer would turn off and turn on again.

  If I move the power cord a little by the power printer connection, power remains standing.

  Can anyone provide me with the part number of HP for the power cable?

  Thank you

  Yucaipa

  This printer uses a standard pc power cord.  All power cord printer or standard pc with 3 connections will work fine.  I just hope that it is the power supply cord and not taking on the printer.

• Color HP LaserJet Pro 400 M451

  Hi, how can I stop someone wireless on my HP LaserJet Pro 400 M451 color printing, for example through. Where and how to configure printing wireless by peope I appoint?

  Hello

  You can specify this by using the Web interface of your printer.

  You should get the IP to do it and you must be an administrator too .once completed, you can select the Security tab and then choose the options that you like to do.

• Multifunction color HP LaserJet Pro 200: problem error 79

  HP LaserJet Pro 200 color MFP M276nw that has error 79 when the woman made an impression. I downloaded the firmwear date, but is not complete installation eventhough the poster 100% progress. Print has only 400 pages printed since new. Need help

  You must click on the link below and download the firmware update file and then run it and follow the instructions.  It is usually sufficient to tell the app what printer to update and it does from there.  Takes only a few minutes.

  http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-Pro-200-color-MFP-M276/5097648/model/5097653#Z7_3054ICK0K8UDA0AQC11TA930O2

• Multifunction color HP LaserJet Pro 200: HP LaserJet Pro 200 color MFP M276nw on El Capitan: Scan does not

  Since my upgrade to El Capitan my USB connected HP LaserJet Pro 200 M276nw MFP color analysis no more.

  What I've tried so far:

  Installed the latest drivers > unsuccessfully

  Tried all the solutions suggested here: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-LaserJet-Pro-200-color-MFP-M276nw-Scanni... > no success

  Have any suggestions what to do next?

  Update: the solution provided in this thread solved my problems:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/HP-LaserJet-2300-not-working-with-El-Capitan/m-p/5281267/highlight/true#M61077

   

• Color HP LaserJet Pro 400 M451dw - error # 49

  We have the above printer. It has been working well for a long time now. It is configured with the ethernet cable.

  At this time, however, when the main user of the printer turns to for use, he first gets up says 'Ready', opens with the IP address then displays "error 49" "turn." This does not seem to do anything.

  I found a post that suggested by ensuring that the printer was not showing in the DHCP, and I do not see here.

  If anyone has any suggestions, please let me know. This is a printer that is much used by the primary user.

  Thank you.

  49 error usually means a firmware error (which could be due to a problem of trainer), but in some cases, it may be invoked by a sending system a use of "punk" (not necessarily a conventional print job) to the device.

  See thread http://h30499.www3.hp.com/t5/Multifunction-and-All-in-One/LJ-Pro300-color-MFP-M375nw-Power-cycling-displays-quot-49/m-p/6348735

• Multifunction color HP LaserJet Pro CM1415fnw - notice of incoming call

  I use the above multifunction device on a network with Windows 7 (and Vista) machines and Mac OS X Lion (v10.7.2).  For some reason, the main screen constantly displays the message 'call '.  It is connected to an incoming phone line (downstream from a Vonage Linksys router, so I use IOPV), and there is an exit of a Panasonic KX - TG6441 phone without phone/answering machine phone line.

  Is it normal that the screen displays 'Incoming call' with the key 'Start Fax' down right under the screen stardard of?

  Thank you for all the advice!

  You can configure this value higher.  The minimum standard ring of Bellcore is 40 volts, typical is from 70 to 90 volts RMS.  I would like to try 40 and 50.  Make sure that it does not always meet the rings.  If you have a voltmeter and adapter in small groups, you can measure the voltage of ringing to see what is generated.

• Color HP LaserJet Pro 400 Prin: What are the functions of the printer HP LaserJet Pro 400 M451nw color?

  I had just intalled and set up this printer. Yes, I can print and no problem. But my question is, it can only print or it can do something else like scanning and photocopy-ing? I have not found the explanation in the manual book.

  Hello

  It is not a printer Multifunction (MFP), it is not an all-in-one (AIO) printer so it can print only:

  http://WWW8.HP.com/us/en/products/printers/product-detail.html?OID=4346035#! tab = specifications

  Kind regards.

• Multifunction color HP LaserJet Pro 200: printer HP LaserJet bleeding in the pages

  Well, so a few months ago our printer started printing with strange faded color smear on the pages. Very subtle at first, but it has progressively worsened over the months, and now it covers almost the page:

  http://i655.Photobucket.com/albums/uu275/zzzz4444/HP.jpg

  It is magenta on one side of the page and orange-ish on the other. I tried to manually run a Page several times cleaning, cleaning things, replacement of cartridges, replacing the transfer roller, and calibrate the color cartridges, which none shows any significant improvement. Does it also on the print side of the paper, and it seems that the toner is leaking on the transfer roller mainly (on the edges, but also on the rest of the roll).

  Any ideas/suggestions?

  It seems that as faulty toner cartridges, are you using the new HP cartridges?

• Multifunction color HP LaserJet Pro 200: Scan problem tray

  I'm having a problem with the scan on the all in one tray. Basically I never scan A4 paper (wireless), but once the data transmitted from the printer to the pc, I find that the PDF version on the screen is too long. I then have to manually crop the size down to A4. It might not seem that a huge problem when say you scan one or two pages, but when you have a whole pile of documents to download, cropping manually each size takes a lot of time. The scanner never used to do this, it's past numbers. I'm using the wrong settings or y at - it something wrong with the scanner itself?

  Well, this should solve your problem:

  Make sure that the printer is plugged directly into a wall outlet, not a surge protector.

  1. Open HP Scan.
  2. Click on the gear icon.
  3. Click on the harvest.
  4. Select A4.

  Please let me know the results after following the above. If you can properly analyze, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Multifunction color HP LaserJet Pro 200: color HP LaserJet MFP M276nw 200 Pro analyzes issues with the new driver (Oct 2015) and El Capitan

  When I updated to the latest HP driver from the HP Support/drivers page, my MFP stopped scan from either a wireless network or directly connected setting.  It seems that if I scan the bed itself, I can scan when the print/scanning felt connected to my Mac, but the real problem is the document feeder.

  I also updated all THE updates Apple, including the HP Easy Scan application.

  When using the document feeder, the process initiated as it should... the first page scans, but does not appear in the HP scanning software... then 10 minutes later, the second page scan (same not result... no picture)... can I get a document could not load the error or something.  When this happens... I can't try to scan anything more until I have restart the MAC and printer.

  Hi @epbarnett70,

  I got a few comments on this issue. Please download and install the HP Easy Scan application to see if it will allow you to scan from the ADF. Use the app for Easy Scan HP.

  HP Easy Scan

• Color LaserJet Pro 400 M451dw: automatic duplexing of color M451dw LaserJet Pro 400 does not work after upgrade Windows 10

  
  

  This seems to be a problem with the printer driver, so uninstall and reinstall should be attempted.  You can use the latest version of the complete software available for download on the following HP web link:

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462&swLangOid=8&swEnvOid=4192

  Other possibilities are related to problems due to the unsuccessful upgrade OS or related aspects should also be checked

• Multifunction color HP LaserJet Pro 200: I can't print to my HP printer using wifi, it was working and stopped after the electricity blackout

  I got my printer to print via wifi and it was working fine but as the power went out a few seconds this morning, it will not be printed.  I even reset the wifi but does not always print.

  Well, for this issue:

  1. Make sure that the printer is plugged directly into a wall outlet, not a surge protector.
  2. Turn the printer off.
  3. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  4. When the lights come back on the router, turn on the printer.

  Now, on the printer, click on the wireless icon that looks like a radio tower. If you see a line indicating the status: not connected, click on settings and Wireless Setup Wizard to connect the printer to your network.

  Finally:

  1. Click on start and open devices and printers.
  2. Right-click on any icon of your printer listed.
  3. Click on remove the instrument.
  4. Click Add printer, and follow the prompts to add a new queue for your PC.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Multifunction color HP LaserJet Pro 200: printing problems - Full black pages!

  My printer has suddenly started printing totally black pages - new black toner cartridge a month ago.

  Do you still have the old toner cartridge. It could be the toner so if you can try another good cartridge. I also have to remove and reinstall the black toner cartridge.

• grinding noise when my HP LaserJet Pro 400 color MFP M475 calibrates

  When my color HP LaserJet Pro 400 MFP M475 recalibrates, I get a grinding or gear sliding noise.  No idea how to fix it or what to look for?

  Noise problems are difficult to troubleshoot remotely and they could easily mislead even when we are near the unit.

  Please confirm if the noise is a squeak or a noise squeky/hum.

  As you mentioned that this happens only during calibration, it is why I suggest you to double check & validate your toner cartridges.  Among the toner cartrdige is maybe defective and causing this problem.

  If not the toner cartridge, then it would be one of the components of hardware printer that is at issue, where a Tech HP may need to perform a physical inspection of the aircraft and the error condition.