M58 series via LAN (GROUND Intel) driver

Similar Questions

• Want to dv6-7307tx: cannot install Qualcomm Atheros QCA9000 series bluetooth 4.0 + HS driver and wireless LAN driver

  Hello

  I use Envy HP dv6-7307tx

  I tried to install Qualcomm Atheros QCA9000 series bluetooth 4.0 + HS driver and the Qualcomm Atheros QCA9000 series wireless LAN driver, it prompted me with an error stating that "the device may not be present or could have been ejected/disconnected from the system.

  And my wifi connection is not stable, it disconnects often, which he can't seem to my other laptop.

  What should I do to solve?

  Thank you.

  Hello:

  The list of parts below to your laptop says that it comes with a card without thread/Intel Centrino Wireless-N 2230 bluetooth, so you have the Intel for W8.1 bluetooth driver.

  http://PartSurfer.HP.com/search.aspx?SearchText=D4B30PA

  Here is the link to the last W81. Driver Intel BT for this model of the wireless card.

  You want the second driver listed for 64 bit.

  https://downloadcenter.intel.com/download/23449/Intel-PROSet-Wireless-Software-for-Bluetooth-technology-for-Windows-8-1-

  You can also try the latest driver wireless card and see if that helps any - once again... 2nd driver for 64 bit.

  https://downloadcenter.intel.com/download/25224/Intel-PROSet-Wireless-Software-for-Windows-8-1-

• Cannot install Qualcomm Atheros QCA 9000 Series Wireless LAN Driver for Microsoft Windows 8.1

  I tried several times to install the driver Qualcomm Atheros QCA 9000 Series Wireless LAN for Microsoft Windows 8.1 in my HP 2000 Notebook PC via HP Support Assistant.  It downloads fine and looks through the installation process, but returns a gray "x" and seems not to install this driver.  Have same problem with Cyberlink Media Suite 10-Office Update, also.

  @WalterPowers,

  Thanks for posting.

  It is possible that there is a problem with the wizard for help where, you may not be able to install the drivers using the program. I would like to troubleshoot the software itself by following the ideas of SuperMario1 in this thread: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/HP-Support-Assistant-Window...

  Also, you can try to install the Qualcomm and Cyberlink yourself. If you go to HP.com, click on support and troubleshooting omn. Drivers and downloads, enter the model number of the laptop, in research. You will be brough to a page where you can select drivers for your product, after selecting a BONE.

• Mobile Intel 4 Series Express Chipset Family Graphics Driver error

  I recently updated my dv7 - 1014ca for windows 7 teacher, but when I try to install 'Mobile Intel 4 Series Express Chipset Family Graphics Driver' but it shows "can't stand."

  You laptop graphics Optional a NVIDIA GeForce 9600 M GT, you don't need driver Mobile Intel.

• Satellite C660 - 2 4 - LAN and WLAN driver issues

  Hello. My name is Alice.

  I have a Toshiba Satellite C660 - 2 4 laptop and I use Windows 7-32 bit.
  I have a small problem when you install the LAN and Wireless drivers. I chose the correct drivers, but after their installation, nothing happens. It stills shows an exclamation sign on the network controller and the PCI of Simple Communications controller (which I believe it is the wireless network).

  Please advice. Should I install a different Windows?

  Best,
  AJ

  Hello Alice

  Your laptop is supported for Win7 32 bit, so you can use it. I can see your laptop didn't come with preinstalled operating system.
  My advice to you: Reinstall Win7 32 bit and install all the other stuff following this order of installation:
  Windows 7
  TOSHIBA Assist
  TOSHIBA Bulletin Board
  TOSHIBA ReelTime
  Chipset SW installation utility
  Intel Management Engine Interface
  Intel driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  TOSHIBA supervisor password utility
  TOSHIBA HW utility
  TOSHIBA Flash Cards Support utility
  TOSHIBA Value Added Package
  Realtek LAN Driver
  Synaptics Touch Pad Driver
  Realtek card reader
  Bluetooth Stack for Windows by Toshiba
  Realtek RTL8188CE Wireless LAN Driver - http://aps2.toshiba-tro.de/wlan/
  ConfigFree
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  TOSHIBA face recognition
  TOSHIBA HDD_SSD alert
  TOSHIBA Service Station
  TOSHIBA Media Controller
  TOSHIBA Media Controller plugin

  Enemy WLAN driver please download the latest driver for Toshiba WLAN portal.
  One last thing: If some of the things listed is not available, it is not so important.

  Please send comments.

• Is it possible to recover it via a USB CD drive?

  Hello

  the original cd/dvd on my laptop drive is broken, so my question:

  is it possible to do the recovery via a usb cd drive, I tried with a windows cd regular and that worked, but now I wonder what to expect from the recovery cd

  one more thing, the laptop is re-installed once at a computer store, but I don't know if they used the recovery cd, but I guess not...

  is it still possible to make a recovery, or should I use some sort of thing hard disk which is cleared by this custom installation. because I don't know if all ghost files are on the dvd collection and I so don't know what

  Thank you very much!!

  No, certainly not possible.
  It is not possible to boot from external USB drive.
  As far as I remember most of the laptops and the BIOS supports a booting from USB - FDD / LAN / CD and HARD drive.

• My Dell Inspiron 1564 does not detect my TOSHIBA e-STUDIO desktop printer 452 connected via LAN

  When I'm at the office, I connect the printer to the office via LAN.

  I am not able to print any document directly from my laptop even if my local network connection is direct and functional.

  Hello

  I reloaded the printer driver and tried to use the LAN printer and it worked. Many thanks for the suggestions.

  Vincent

• 'Pilot of custom computer manufacturer' not up to date with Intel driver... solution?

  I tried to update my driver Intel HD Graphics of Intel Driver Update Utility and I get:

  "A custom computer manufacturer driver is installed on your computer. The Intel Driver Update utility is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer.

  I used HP updates day & Solution Finder to get the latest driver, but again, I am still not up-to-date with the drivers supplied via the update utility drivers Intel

  
  

  1. What are the differences between HP "s"custom"Intel HD Graphics driver and pilot generic Intel's HD Graphics? (What are customized drivers computer manufacturer in general?)
  2. Is it possible to install these drivers workaround?
  3. What are the technical problems that might occur if installed if they are radically different?

  My laptop:

  Spoiler (Highlight to read)

  Windows 7 Home Premium Edition Service Pack 1

  64 bit

  Laptop HP G72-b63NR

  Spoiler (Highlight to read)

   

  Windows 7 Home Premium Edition Service Pack 164 bitHP PC laptop G72-b63NR

  Hello

  I can tell you one thing with certainty. Even if you install latest graphic driver Intel then will not increase performance much, because these cards are low quality products. In their case, the most important is the stability that is afforded by the driver provided by HP.

• Printer sharing via LAN - EPSON XP-335

  Hello

  We use 3 Macs connected via LAN (Ethernet, we do not use Wi - Fi).

  I have connected an EPSON XP-335 via USB to Mac #1, and it prints fine.

  On all Macs, I installed the software EPSON printing and active "Sharing printers", via preferences > sharing.

  but when I try to print from Mac #2 or #3 I get this message "not connected":

  

  What should I do?

  Thank you very much.

  Hi coxorange,

  Please use the Apple Support communities for help. From your post, I understand that you are unable to access the printer that is connected to one of your iMac, others in the House. I know it's nice to be able to print from all of your devices, so I'm happy to help you to provide advice for this.

  From the information you provided, it seems that there is some confusion about the way the printer is shared on your devices. In order to have a shared printer, you must only share from the computer to which it is connected. From there, you can connect to this printer with other computers. Perform these steps on the iMac to which it is attached:

  How to share a printer:

  1. Open sharing preferences if it is not already open (choose Apple menu > System Preferences and click Sharing), then check the box print sharing.

  2. Under printers, select the printer you want to share.

     When you share a printer, all users on your network ("everyone") can use by default. If you want to restrict access to specific people, go to steps 3 and 4.

  3. Click on the button Add at the bottom of the users list, and then do one of the following:

     • Select a user in users and groups, that includes all your Mac users.

     • Select a user from the network or users groups network, which includes everyone on your network.

     • Select a person in your contacts. Create a password for the person, then click on create an account.

  4. When you add people to the list of users, access to the shared printer is reset to no access for the users of your network ("everyone"). To provide access to everyone again, click the triangles, then choose can print.

  Source: OS X El Capitan: share your printer

  Once the printer is shared, you'll want to implement on your other computers. Check out the second section of this article, titled "Add a Wi - Fi or network printer":

  OS X El Capitan: Add or remove a printer

  If you continue to have problems with your printer setup, here are some additional articles that may help you identify the problem:

  OS X El Capitan: print troubleshooting

  Troubleshoot printer on your Mac

  I hope you have a great rest of your day, cheers!

• HP 840 G3: 840 G 3 Intel Driver Bluetooth - silent installation - MDT - does not

  In the hope of assistance

  Intel Driver of Bluetooth does not work well when you deploy the driver as an application through the MDT task sequence.

  I'm running in question when using MDT Lite Touch 2013. Even if I was able to import this driver as an application, the result is still not good.

  I imported as an application

  I use silent syntax 'InstMultiPkg.exe' / / Silent

  It installs as a mandatory model 840 G3.

  I can verify that the installation was successful from my journal of MDT with return code 0.

  Once you 840 G3 no final reboot, I connect, I check in the Device Manager and it says "generic Bluetooth adapter. I don't know what I'm missing. I don't know if there is a dependency of the installation of another application of HP but I tried this manually and it works fine.

  I extracted the files and run as a msi file, is a with the command install.cmd.

  MsiExec.exe /i "Bluetooth.msi Intel" REBOOT = REALLYSUPPRESS number

  Use the 18.1.1508.0538 for our 840 G3 version and do so as a package in my customsettings.ini

• Installing the Intel driver

  After a fresh install of Win 10 (Microsoft ISO), I tried to install the Intel driver. First of all, everything works and Microsoft installed a driver that seems to work with the installation of Win10. But with regard to the double graph I want install drivers Lenovo. The ATI works without problem, but if I try to install the Intel Lenovo site I got the error that I need to contact the manufacturer for a special driver

  Look in your device manager, see if the Intel HD Video graphics or 4000 Intel are installed. If so, you need not to all other drivers.

  If not yet installed, look for the marked entries red or yellow, right click and select Properties, then the Details tab, then down to hardware ID. Copy the string and paste it into the answer.

  CB

• Series LV examples do not work with the series via USB unlike HyperTerminal

  Hello

  I have a camera with that one way to communicate - series via USB. With Hyperterminal, it works as expected, but none of the examples of series that come with LV gets no response. When highlighting the execution, Write function will return no error (but apparently not send anything - no visible reaction from the device), and then the Read function gets nothing (late just then, judging by the experience with Hyperterminal).

  Would be grateful for any suggestion useful.

  Thank you.

  Indeed, they have been included; as example intends to send "* IDN? \r\n", \r\n were taken directly from there.

• How to order a N5230A Agilent with LabView, via LAN?

  I want to order a N5230A Agilent via LAN, but I think I have some problems with the VISA of the device configuration or configurations on the device.

  I was looking on the forums, but has not found the solution to my problem. Could someone help me?

  Thank you very much

  I found the solution to my problem.

  The connection to the PNA is authorized with a TCP Socket on port default 5025. In MAX, the IP address and port number need to set to be able to control via LabView PDA.

• Cannot install "Qualcomm Atheros QCA9000 series Bluetooth 4.0 + HS Driver for Microsoft Windows.

  Hello

  I use an HP Envy 15 J049tx laptop.

  I am facing an error during installation "Qualcomm Atheros QCA9000 series Bluetooth 4.0 + HS Driver for Microsoft Windows.

  It displays an error such as,

  «The device may not be present or could be ejected/disconnected from the system...» Insert or reinsert now. »

  What should I do?

  Hello:

  According to the list of parts on the link below, your laptop is with Bluetooth 4.0 Ralink wireless card.

  http://PartSurfer.HP.com/search.aspx?SearchText=F2C59PA

  Therefore, you must install the Ralink bluetooth driver and software for the Ralink, not the Atheros one wireless card.

  This is probably the reason why the driver cannot find the atheros bluetooth device (because your laptop lacks an Atheros wireless card).

• Incorrect version of the Intel driver causing the problems of Youtube?

  So I installed a program called the "Bluestacks App Player" from a few months back. It's basically an emulator designed to run Android on PC applications. When I downloaded first, he told me that she needed a newer driver. I thought it was weird, because Windows update is supposed to keep my drivers up to date automatically, but decided to go with her when even (because, you know, these birds Flappy urges...). Anyway, as soon as he installed the driver, my screen went black for about 10 seconds. Then the screen came back, but with a very old Windows design that I had seen before only when I booted my Windows 7 laptop in safe mode. After a minute or two, the screen has disappeared and then reappeared with the normal Windows 7 and updated design page. I started the program kkkkk and it worked fine and I was able to play some of my favorite on my laptop Android apps (Temple Run, Flappy bird, cut the rope, etc.). I thought it was really cool and decided not to do a system restore, despite fear of blacking out screen / display the safe mode of Windows style. After a month or two I had almost forgotten this topic.

  However, the other day when I was watching videos on Youtube, my screen blacked out for a few seconds before reappearing. An error message appeared, which I ignored him, assuming it was a glitch once. However, a minute later, when I was watching another Youtube video, the new screen blacked out for a few seconds. This time, I read the error message. (see attached image).

  My first thought was "what the f *! I have not even Windows 8 is installed. My machine came with and always had Windows 7. »

  So my question is, why I apparently have a driver for Windows 8 (R) installed on my machine? A compatibility issue between this driver Win 8 and my Win 7 OS could be cause my intermittent screen crashes? Also, is there a way to tell what drivers I'm supposed to be on my machine?

  Here's another picture. "programs" that were installed with

  KKKKK. Some of them as they have installed the drivers.

  Any help / advice would be appreciated. (But don't just tell me to do a system restore / repair installation.)

  P.S.: Youtube accidents have become more frequent recently. usually my screen turns off or when you try to load a Youtube video or to halfway through a Youtube video. It happens on average at least once or twice a day. Blacks usually only display on during a few seconds, then comes back with the error message shown above.

  Also, I checked the website of the manufacturer of my computer. I tried to download what I believe it's the correct driver.

  

  However, after downloading nothing's really happened. When I checked the downloads, it was downloaded a record intel with a bunch of files inside. How can I install the driver?

  

  I don't know how to use the downloaded folder in the site from my computer to install the driver. Also, I currently have a newer version of the intel driver, so I don't know if I can install this one since it comes from a previous version. Do I have to uninstall my current intel VGA driver first? If so, my computer will be able to operate without its VGA driver. As my computer is just a black screen, whenever the driver fails, if I uninstall it, don't I faced with a permanent black screen. I'll be even able to see what I'm doing?

  Do NOT trust Windows Update for drivers. Use only those provided by the computer manufacturer.