M58e 7269 SFF connector card mother USB2 pinouts (PIN # s &; functions) ex + 5Volts = pin, etc.
Just bought two new ThinkCentre M58e 7269-SFF.
We need to use the internal motherboard USB2 connection to provide the connectivity (for printer POS cash drawers). It is an investigation of the pinout USB2 motherboard (functions & key numbers. USB2 connector for card mother M58e is 12 pins, with a key (unused pins). Cannot determine what PIN pin connector 1,2,3 etc and cannot find the description of USB pins on each spindle is used for (Eg. Red, Green Black Yellow and their function. Example the 5Volts pins & #, ground pine & their numbers etc.). Reflected on all knowledge databases, previous community issues and called Lenova support numbers (but failed to get a response).
The second pattern HERE will give you the info you need.
Tags: ThinkCentre
Similar Questions
-
SSD for HP dc7800 sff with card mother 0AA8h of Hewlett-Packard
Can amyone tell me which, if necessary, the ssd would be compatible for a pc with this motherboard?
Thank you
Hello:
All I can tell you is that you will have no support pad for one SSD on a dc7800.
There are only two parameters of the disk controller... RAID and IDE.
And you can have problems like I did during the installation of any hard drive that is SATA III.
My dc7800 displayed all the symptoms listed in this document on the link below.
What I had to do was to take the hard drive HP Seagate 1 TB SATA III out of my HP 8200 Elite CMT and put it in my dc7800.
Then it worked very well, and I had to buy another hard drive to my 8200 Elite.
-
Satellite in a series - error: conflict of resources - PCI on the card mother BUS: 09
What started it stops early on with the error:
-Conflict PCI resources on the card mother BUS: 09, device: 01 function: 00
-Conflict PCI resources on the card mother BUS: 09, device: 01 function: 02
-Conflict PCI resources on the card mother BUS: 09, device: 01 function: 03I have the option to continue with F! that works.
I use Windows 8 at the moment, but it seems not so stable. Above mentioned mistakes occurred that after awhile, I upgraded to W8.Do I need a new motherboard, or y at - it another option. What does this error mean in normal words.
Hmm, it looks like a problem with the motherboard or part connected to the motherboard.
The error indicates this device 01 because of controller 09 conflict
Have you tested the RAM?Recommend doing this! You can use a tool like Memtest or similar.
Maybe it isn't that a Ram problem and new modules could solve your problem. -
H8-1223: card mother HP Angélique Label of ports and diagram
Put I upgraded my computer and I have a upgrade my card mother-M3970AM-Hp (Angelica2) in an Obsidain of Corsair 350 d case. The problem is the case connectors are labeled, but aren't the ports on the motherboard. I need to have the labels on the ports and connectors of my Board of Directors. The case conectors are: Power SW, Pwer Led - and Power Led + and SW Reset. I need information on the place where to connect or if these connectors at all. I'll try to send some photos if I can understand how this Bluetooth to my cell phone.
On the left is the cornerstone of HP mother. I wanted you to see the ports that are on the map. PSWD HP LPC. The line is the Corsair Obsidian Series 350 d connectors. How can I connect these? Or do I really need them?
-
HP P6 2120t: possible cards for the card mother Pegatron IPISB-CU on a computer of 2120t HP P6
So, I'm looking to upgrade my graphics recently. Over the months, I've been looking around and find out a lot about how work cards graphics, and I need to find one. However, what I don't know much about is the compatibility of graphics cards with card mother Pegatron IPISB-CU. I checked and I'm running on FRIEND 7.19 BIOS update 02/04/2012. It seems that I need to look for graphics cards that can work with "Legacy" BIOS. However, it's not not clear that even if I bought one it would work. I was hoping so to ask HP and the community if there was in fact a strong graphics card that would be 100% some works with my motherboard/BIOS card.
To archive the many discussions of forums, it seems the MSI 750ti ( http://www.newegg.com/Product/Product.aspx?Item=N82E16814127783 & cm_re=msi_750-_-14-127-783-_-Product ) is my best bet because it is said to have a switch making it compatible Legacy Boot. However, read the description of the product, I have not found this mentioned in the features. What scares me.
If someone could shed some light on what I'm working with. I would be extremely grateful. I'm ready for the possibility that there is no viable option other than buying a new motherboard and the OS, but if I can get away with upgrading my current system I would be very grateful.
Thanks to all who take the time to read/answer
Drew
At the company MSI Web page in the master record for this MSI cardunfortunately didn't even State if power 6-pin PCIe connectors are needed. Also, it does not specify that there a dual BIOS or the old BIOS support. I wouldn't consider this one for your motherboard.
You may need to upgrade the PSU as your installed PSU doesn't have 6 - pin PCIe connectors with power cable to power the card video update.
EVGA and Gigabyte are also PCIe x 16 graphics cards with dual BIOS allowing a choice of inheritance or the EFI.
Cards with BIOS double EVGA
http://www.EVGA.com/articles/00767/
I'd take a peek at the r7 of Sapphire Radeon 260 and higher and r9 in the 300 series Radeon cards. In fact, they have a physical switch on the map.
Sapphire video card specifications
http://www.sapphiretech.com/catapage_pd.asp?cataid=271 & lang = eng
What is 100% certainty in the work with your motherboard, you upgrade a ready to use PC or a system as you put as well as components custom, studied and chosen by yourself.
I suggest you buy your video card with your credit card. If this does not work with your motherboard you can return. Which takes an element of risk fomr away the attempt.
-
What card mother motherboard inside the Pavilion hpe h8xt with Ivy bridge
You want to buy, but can't find any information on what motherboard that uses. Would love to see a pattern!
@ Big_Dave
Here is the card I found for the card mother HP OEM Pegatron IPMMB - FM (Formosa). The specifications indicate the decision-making is an Intel LGA 1155 (Socket-H2) and processors supported are;
Intel Core i3-3xxxT (Ivy Bridge) Dual Core 256 Intel Core i3-3xxx (Ivy Bridge) Dual Core 456 Intel Core i5-3xxxT (Ivy Bridge) Dual Core 256 Intel Core i5-3xxxT (Ivy Bridge) Quad Core 152 Intel Core i5-3xxxS (Ivy Bridge) Quad Core 756 Intel Core i5-3xxx (Ivy Bridge) Quad Core 676 Intel Core i7-3xxx (Ivy Bridge) Quad Core 676 Intel Core i7-3xxxK (Ivy Bridge) Quad Core 676 Intel Core i3-2xxx (Sandy Bridge) Dual Core 756 Intel Core i3-2xxxT (Sandy Bridge) Dual Core 256 Intel Core i5-2xxx (Sandy Bridge) Quad Core 95W Intel Core i7-2xxx (Sandy Bridge) Quad Core 95W Dual-core Intel Pentium G6xx (Sandy Bridge) 756 Dual-core Intel Pentium G6xxT (Sandy Bridge) 256 Dual-core Intel Pentium G8xx (Sandy Bridge) 756 and supported memory;
Dual channel memory architecture
Four DIMM DDR3 240-pin connectorsSupports DIMM DDR3 modules
PC3-10600 (1333 MHz)
PC3-12800 (1600 MHz)
Memory non - ECC, unbuffered
Supports 1 GB, 2 GB and 4 GB DIMM
Supports up to 4 GB on 32-bit systems
Supports up to 16 GB on 64 - bit systems
Frank
-
8200 elite format microtour, need of care technique for card mother/PSU
Hello.
I'm upgrading of the power supply in my Hp Compaq 8200 Elite format microtour.
The /PSU motherboard uses an archaic connector that looks like a connector 6-pin inline with to the (http://i20.photobucket.com/albums/b225/r4ch3t/Aux-connector-148x200.gif). But it is connected with 4 wires (red/white, white, green, purple)
To upgrade the PSU, I need to find a way to connect it to the new motherboard, but I can't find any information or datasheet for the motherboard or the power supply.
Motherboard:
SP #611834-001
DG #611794-000
PSEYU0JCY0W197
AS #611793-003
0J REV
POWER SUPPLY:
Model: PC9057
PART NUMBER: 611483-001
ALTERNATIVE NUMBER: 613764-001
Where can I find more information about the card mother/PSU?
What is the connector? It is standardized in some way?
What is the combo of tensions/soil necessary for the pins?
Thank you
Your question would be better served in theHP Enterprise business community. I highly recommend that you join the community and post your question there.
This time, do not forget and give identifying information more accurate than you did in this post. In the image below, you will see how what gave you as a product identifier can be confusing.
-
Speed of sata card mother MSI MS-7613 (Indio)
Hello
I need to know, what kind of sata connectors have the card mother MSI MS-7613 (Indio)?
(1.5 gb/s, 3 gb/s or 6 gb/s)
Recently I bought a Samsung SSD 256 GB evo 6 Gbps and want to now how much speed is supported by this motherboard.
Thank you very much.
Hello
The following machine uses "MSI MS-7613 (Indio) motherboard.
http://support.HP.com/us-en/document/c01925958
It is clearly stated:
Hard drive
-
Dell Studio XPS 435mt does not - light light orange card mother
I had my Studio XPS 435mt for recent years and love it! Normally I leave my machine on almost every day all day so I can access it remotely. Well, today my power went out (the product is connected to a good surge protector) and now it won't turn back on.
When I plug it in there is a green light to the rear of the machine and internally, there is a orange light, which lights up. When I press the power button nothing happens, not even try to power on. I read a few forums that suggest all of a new power supply, a new motherboard and even a job to 'put your motherboard in the oven' random.
So my question is can I do anything to check what the problem is? Also, if it of a motherboard problem and needs to be replaced, where is the best place to get a motherboard? Reference Dell sells to them directly or I have to go to a 3rd party to track down?
Thank you in advance for your help!
A type of power surge Strip does nothing to protect the PC during a power failure. You need a 'UPS' unit to protect the PC during short power outages (most).
As he ran, anything could have happened to the power supply to the motherboard to a component on the motherboard.
As you have the power to 'keep' alive on the card mother, indicated by orange LED, power supply works somewhat. Unplug the power connector 24 pins on the motherboard. Then the rider GREEN wire to a BLACK wire and see if the power turns on (fan running). If it does, it does not say the PSU is good (only replace it with a known good power is the only true test for a power supply), but it does not say the rotation of the problem is not in the power. If it does not start, food is the likely problem.
If the power supply lights the other most likely problem is the motherboard. Reinstall (unplug and plug back in) the prior panel connector on the motherboard and then give it a try. If it still does not respond, the motherboard is suspect. The power switch, itself, would be a very remote problem.
Dell is a source for a replacement motherboard. There are sites that sell Dell used/given to nine motherboards and ends up with a google search. Only another mother of exact replacement fit and work.
Finally, regardless of the tests do or anything that seems as it isolates a certain part, unfortunately only to replace the part really tell you if it's bad. To avoid buying something you don't need you can make to a PC repair center renamed to what is really wrong.
-
Drivers Windows 7 x 64 for the card mother Memphis-M
Hello! I bought the HP Pavilion 500-164er with Linux operating system desktop PC.
Still, I installed Windows 7 x 64 on this unit, but I couldn't find some drivers for the card mother Memphis-M.
I need:
Simple communication controller PCI Chipset, USB 3.0.
Thank you and waiting for a response.
Hello:
You can use the W7 x 64 drivers and software of this model that has the same motherboard as yours.
DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES
Chip set:
Comms Simple PCI:
USB 3:
-
Replacement card mother Qosmio G10
After replacing the card mother a Qosmio G10-120 original Win Xp MCE with the official update (FC43S1 A5A001749010 P000454980 jury), some problems have arisen:
1. second HARD drive internal no more seen.
2. all buttons stop "standby/disable rebooting the computer" do not completely take effect (office closed way unexpected but manual power button continues to show the color blue and portable remains active).
3. always on cooling fan.Upgrade the motherboard consisted of:
1. creation of new channels DMI Council (in particular "Model name" field was set to "Qosmio G10").
2. loading the CD-ROM TCN0000006 official update tool.
3. no recovery BIOS or EC/KBC.Any idea?
I m wondering how you did update the information in the DMI?
As far as I know that the Toshiba authorised service provider is able to update information DMI as the model name, version number, etc. using utilities and special tools.I googled for the motherboard part number, you have deposited in your original thread, and it seems that this motherboard has been developed the Qosmio F15 series.
So maybe his bad card mother -
card mother Memphis-b: b of memphis
I bought a new case for my computer, my computer has card mother mephis - b inside and I do not know what pins match the power switch, power led, ect there at - it a model that explains what the pins are what? Help, please.
Please try the stitching as shown in the graphic below;
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
-
Pavilion Elite 300Z: identification of card mother sata socket
My card mother Aloe-GL8E has 6 sockets SATA of different colors - black, white, blue, yellow, red. What the colors mean on this forum, as I think they are all 3 GB/s? I want to add a second HDD - does matter which plug it goes in?
The plugs are numbered from 1 to 6. The boot order will follow in succession.
I found a reference. Can you check the color and number?
Dark blue - disc 1
White - disc 2
Light blue - Disc 3
Yellow - disc 4
Red - disc 5
Black - disc 6
-
Card mother MS-7613 Iona: Corsair XMS 3 2 X 4 GB DDR3 1333 mhz compatible?
Hi all.
I have a simple question: is this compatible with the standard ram card mother MS-7613?
http://www.Corsair.com/en/CMX8GX3M2A1333C9
How did you select the Corsair ram? I can't find a link suggesting its compatibility with your exact computer. I found three different modules 4 GB here who are recdommended. Found an example of it on Amazon.
-
I get a Toshiba satellite 1900-102 with a default card mother work
Does anyone have a default Toshiba satellite 1900-102 with a card mother work and is willing to sell?
Or does anyone know where to find that?
Hi Erdl,
I think this is the wrong forum to ask questions about buying used and portable defects! I understand toshiba as well as this forum is only for technical user to help!
In my opinion, you will have more luck at ebay or used equipment selling home pages!
Sorry
Campino
Maybe you are looking for
-
How to install Windows XP SP2 on Satellite A205-S4587 no floppy USB drive
Hi all. I ask forgiveness for my EnglishI have the Toshiba Satellite A205-S4587 model. For me it is not necessary for Windows Vista operating system, and I want to establish the Windows XP SP2 operating system. Because I have all queshion. 1. If I is
-
Y410p ~ Windows 8 Task Manager 'Priority' column
Hello So, I have looked everywhere and can't find the process priority column or change the priority of a process in Windows 8 while he was a piece of cake in 7. ERGO, I have time to write this while my Y410p is defragmented. I would really appreciat
-
OfficeJet 4630: Question of scanning OfficeJet 4630
I used my Officejet 4630 without problem for more than a year, but today, when I try to scan, the image is very dark and has green stripes down the entire image. Copy attached scan (photos polaroid in a ring-bound album. The scanner glass is clean
-
How to dynamically change report style sheets in TestStand.
How to dynamically change report style sheets in TestStand.
-
My email has been hacked and I forgot the password of accounts alt
pls help my msn account has been hacked and I cannot change the case of password that I forgot the account alt pls help