M6-K010DX: is the whitelist Qualcomm QCA9565 802.11bgn on the market?
Small question. I have the Ralink RT3290LE for the M6-K010DX that has been irritates me for some time. HP has made the decision, and I wasn't enough savy to know the difference when I bought the laptop.
Back to my "quick question". I'm looking to upgrade to the only other on a white card network for systems AMD based, Qualcomm QCA9565 802.11bgn list. Problem is that I can't find this adapter anywhere.
Someone at - it ideas?
Less than $5.
REO
Tags: Notebooks
Similar Questions
-
Hello
I have a laptop HP 14 which is currently used for academic purposes. However, at the school, the WiFi is dual band, and so I can't connect. At the moment I have a QCA9565 of Qualcomm Atheros 802.11b/g/n WiFi adapter and I am aware that is not double band. So is it possible to replace the current single band with a dual band adapter? Is it is possible to replace the card, then you have suggestions of what to buy and how to install the product in my book. If there is a free alternative, please keep me informed.
Thanks in advance.
Hey @Raiyan1 ,
Here is a link to page 31 of your manual . The Wifi card is a mini map 1 x 1.
Thank you.
-
Qualcomm-atheros 802.11 a/b/g/n dualband wireless network module is dying
I have a problem with the 802.11 wireless network module a/b/g/n dualband Qualcomm atheros - after a few hours of work my computer starts a fall connection for 5 to 30 seconds (I installed monitoring software). It is not question of modem or router from a connection wi - fi on my laptop works very well. I also tried turning off my Norton Insternet Security, but it does not solve the issue. Once I connected my pc to the router although eithernet past all the connection problems.
Question: what is the good replalcement for module of qualcomm-atheros 802.11 a/b/g/n dualband wireless network? I can't figure out what model it is and qualcom seems to offer a different set of products now.
Hello again inter9115,
You are welcome!
If this answer solved your problem, can you please mark it as an accepted solution? This will help others with the same question to find the answer they're looking for.
Have a great rest of your day! -
Hello, I had problems updating my Qualcomm Atheros 802.11 a/b/g/n dual band Wireless Network driver Module. I looked as hard as I could to find out how to determine the number of chipset, but no cigar. I even took a peek inside my computer to see if I could find something, but that was of no use. The Atheros Wireless Diagnostics utility tells me I have the wrong driver installed (there is 99.9% chance it was my fault). Here is a part of the diagnosis result: installation of the test pilot
This test is to check the installation of the radio driver.
Radio registry keys are OK.
NIC name.... : Qualcomm-Atheros 802.11 a/b/g/n Dualband Wireless Network Module
The driver... name: ATHRX
... Driver path: C:\WINDOWS\\SystemRoot\System32\drivers\athrx.sys
Version of the driver...:This is the first string under the ID of material for my Qualcomm Atheros 802.11 a/b/g/n dual band wireless network Module: PCI\VEN_168C & DEV_002A & SUBSYS_1000168C & REV_01.
Hello:
I have compressed upward and attach the file atheros.cz that you need (under attachments below).
Note that it is only good for W8 and older, so it may not work on W10.
I also read a post from another Member of the forum, which wants to install W10 where MS W10 compatibility checker reports that the wireless card you have is not supported.
So... try this and if it works, unfortunately, you will need to get a new wireless card. I suggest you only watch on maps wireless dual band usb external.
Download and uncompress the file that I attached to his record.
Go to Device Manager and click on the network controller needing drivers.
Click the driver tab. Click on set to update driver. Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.
Make sure that the include subfolders is selected and see if the pilot goes like this.
The hardware ID you posted is present in the driver installation information file.
-
Hello, I have a windows computer 8 and I deleted the so-called the ralink wi - if adapter 802.11bgn rt5390r. Now it doesn't let me connect to internet at all. It also won't let me restore my system because it says that there is something missing. I can't send back from my computer, what should I do.
Separated from:
Hello
What is the brand and model of the computer?
I suggest you to download and install the drivers for the rt5390r of ralink 802.11bgn wi - if adapter from the manufacturers website and see if that helps.
Download and install the drivers
http://Windows.Microsoft.com/en-CA/Windows-8/all-driversSee also the link: wireless and wired network problems:
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1I hope this helps. Let us know if you have other problems with Windows in the future.
-
RALink RT3290 802.11bgn Wi - Fi adapter will not connect to 802.11 g, windows 8
Hi eeveryone,.
Some can help me!
I bought a new laptop HP Pavilion g7. Ralink RT3290 802.11bgn Wi - Fi adapter I but my problem is that I can only connect to the network 802.11 n and I can't use wifi 802.11 g. When I try to connect wifi 802.11 g it says limited is unable to download a Web page, but should I use with this adapter Ralink 802.11 bgn Yes?
I've already updated the wireless card but did not help I have disabled all firewall and antivirus software and I have already written here manually the IP address, netmask etc... I got the software window 8.
But the funny thing is with my old laptop which has windows 7 that I can connect without any problem WiFi 802.11 g!
I would use 802.11 g, because the signal is stronger than 802.11 n. I hope I can receive the signal of network wifi 802.11 g somehow.
Thanks for your answer in advance!
maybe try to reinstall windows and check how it works without installed programs
You can also restore your windows settings to check
-
RALink RT3290 802.11bgn adapter Wi - Fi doesn't work does not correctly
I bought a HP Pavilion TouchSmart with Ralink RT3290 802.11bgn Wi - Fi adapter. Everything worked fine until I can't say when it started really, I've had a few problems with my WiFi connection. I'm not really sure, but I have the feeling that it has been getting worse over time. Suddenly, the internet connection is lost. Troubleshooting gives me different results, most of the time that it is "the default gateway is not available." Sometimes it is fixed, sometimes not. I looked online, what could be the problem. Then I opened my device manager and checked the network card, unchecked "allow the computer to turn off this device...". ", but that did not help. Once the power management tab was not yet available. Sometimes, the card is disabled. Do not know why. Sometimes I can turn it on just by clicking on activate. This average doen't, that I have no internet, only that the adapter is enabled. Sometimes she even let me enable it.
- And he dropped my internet connection again!
Troubleshooting: 'the default gateway is not available"- fixed
I've updated the WiFi card to the 5.0.37.0 version. Does not solve the problem.
Sometimes my computer tells me that there are no available connections. But I know that there are plenty around.Someone help me please! I'm desperate!
Thank you.
Silke
I think that my problem has never been with the WiFi adapter. A month ago, I went to Comcast (with 105 MB/s) to AT & T (with 18 Mbit/s). Since then, I didn't at all connectivity issues. And as incredible as it may seem my internet speed is the same, since the speed of Comcast almost never reached above 20 Mbps. If I would have known that sooner! Would have saved me hours or even days with internet connectivity and problems on the phone with the Comcast people!
Thanks to everyone for their help and advice. Maybe my information can help others with the same questions.
-
RALink RT5390R 802.11bgn Wi - Fi adapter
How can I reinstall the Ralink wireless driver-Ralink RT5390R 802.11bgn Wi - Fi adapter
Hello:
Here is the link to the latest wireless driver for this card...
Click the tab Installation Instructions to know how to install the driver.
-
A few days ago, I got a new notebook HP ProBook 430 G1. OS: Windows 8.1
They have Mediatek MT7630E 802.11bgn Wi - Fi adapter inside.
Problem: I found this wireless adapter does not work in 802.11n mode (mode-N), but works well as in G-mode.
Some modifications in the parameters of the driver on the Advanced tab are problem solved.
I think it's a bug of material, or (less maybe) a bug in the driver.
In other forums, I heard that HP can replace the card wireless, which works well. Is it not?
You misunderstood me. I meant, of course, all channels from 1 to 13.
I solved the problem by unistalling completely all the WiFi and software of the device with its drivers from Control Panel.
Then downloaded latest drivers from site oficial Mediatek.
In the Advanced tab of the new driver settings option appeared - "802.11n direct mode.
After you enable this mode WiFi started working in mode N well.
-
RALink RT3290 802.11bgn Wi - Fi adapter detects no wifi
I use HP PAVILION 15-E015TX. I have reset my windows 8 OS recently due to a corruption of the data. After the reset of the operating system, everything is reinstalled to its original state. But the Ralink RT3290 802.11bgn Wi - Fi adapter does not detect the wifi is working normally before you reset the operating system. When I run the HP SUPPORT ASSISTANT troubleshooting option, it shows a red mark when you reset the adapter.
I want to know how I can solve this problem.
sat_m,
Welcome to the HP Forum.
Before you make any changes, make sure you have a recent restore Point / new created:
- Create a Restore Point create a restore - Win7 Point OR create a restore point Win8
- Have you tried installing the driver from the Web page of your computer?
Version (in writing): 5.0.37.0
Date: 2013-12-23
HP 15-e015tx - Ralink 802.11 b/g/n Wireless LAN Adapter Driver
Make sure your Chipset driver is up-to-date - then install / update the Ralink driver.
Take a look at the other drivers to confirm that they are at the level of the version you want.
Click on the star of congratulations !
It's a nice way of saying 'Thank you' for help.
Although I strive to reflect best practices of HP, I do not work for HP.
-
3270NR HP Envy 17 - not in the market of the UAE UNITED for the purchase of
I would buy it but this product not available in the UNITED Arab Emirates...
Screen size 17.3 inches Max screen resolution 1920 x 1080 pixels processor 2.3 GHz Core i7-3610QM RAM 8 GB SDRAM Hard Drive 750 GB Graphics coprocessor AMD Radeon HD 7850 M Graphics Card Ram size 1024 MB Wireless Type 802.11bgn number of USB 3.0 Ports 4 battery lifetime (in hours) 7 hours
Try this link http://goo.gl/KiYTW
It is suitable for laptops available in your area.
Please let me know if it helps!
-
RALink RT5390R 802.11bgn Wi - Fi adapter has driver problems
Hello friends, and HP
Is no longer, I can connect to the internet via wi - fi. In case of problems (by ethernet connection), I get the following error:
The computer is a HP Envy dv6t Quad laptop, Intel Core 2.4 GHz running Windows 8. (Bought 12/2002)
Any help would be most appreciated.
YAB
Any of these will work:
Atheros WiFi 802.11b/g/n, Bluetooth 4.0 adapter and 1 × 1 9485GN 3012 655795-001
Atheros 802.11b/g/n adapter Bluetooth 675794-001 1 × 1 WB225
Broadcom 4313GN 802.11b/g/n WiFi and Bluetooth 20702 4.0 1 × 1
Adapter combo 657325-001
Module Intel Centrino Advanced-N 6230 WLAN 670691-001The manual is incorrect because the part number for the Centrino card is actually the Ralink card:
The eBay link should be an exact replacement for your. Here is the Service Manual:
See Page 52
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
RALink 3290 802.11bgn adapter Wi-Fi-speed slow
HY,
I have a 4540 s ProBook HP with Windows 7 Pofessional 64 bit and I found that the speed of the wifi is very low. The maximum download speed is 2.8 M/s. Isn't a conection problem because on other devices, I have a speed of 10 M/s. A problem with my WiFi adapter or is the maximum speed for this model (Ralink 3290 802.11bgn)?
Hello entropicu,
Your ProBook is a business model. Your question would better answer on the HP Enterprise Business Community Forum
Good luck!
-
RTL8188EE 802.11bgn computer adapter laptop Pavilion 17 "AMD not finding oe 5 G 11n mode
The map depending on the device, the Manager is RTL8188EE 802.11bgn adapter in
I have a Pavilion laptop 17 "AMD not finding oe 5 G 11n mode.
In properties, in the mode list, there is no mode 11n.
How to get the correct driver for the 11n mode.
Hello:
The 802.11bgn adapter RTL8188EE is only a wireless card single band (2.4 GHz).
Whenever you see a device listed as bgn wireless, it's a single band card.
Cards labeled dual band abgn or agn.
-
where is the page of the market?
Hi-
This page of the market seems interesting, but I can't find a way to access, or if I already have an account there. is this the same sign as my connect you in support of Qs?
Thanks - susie margaret
https://marketplace.Firefox.com/
For what is an "account" on the market, it looks like it uses a separate registration system. None of the other Mozilla site 5 accounts I have are recognized for "sign in", and all 5 accounts of my friends use the same email address / 'username' and password.
Maybe you are looking for
-
Outlook for Mac 2011 does not accept my e-mail and password on the account configuration.
Hi, I entered my email and password correctly, and Outlook said that could not authenticate the gmail server... Does anyone know how to fix this?
-
Shared variable refuses to deploy correctly!
My problem looks like one that has been met before, but without good answers on the documents OR or the forums. When you try to run a VI that deploys shared variables, I get an error that the shared variable engine was not found. This seems to be alm
-
Has been updated to windows7 to 10 day
My pic went black after a message that says not to turn off your sound pic was black if long he fell asleep I do
-
Have a film Scanner, FS-500 & Filmimager CD
to run on Windows XP. Does not work with Windows 7 Home Premium. No matter what CD available update or response. BRIANVB
-
Fade out effect when you change screens
Hello world I have a screen (the sheet object) with some objects (labels, imageButton, etc.) and I need to change its background of fadeing effect, and if it is possible do not change objects. One of the ways I see to create a new page with the same