M600 MOU w / Broadcom - error code 10

Similar Questions

• Broadcom 440 x 10/100 integrated controller Gets the error code 22 in Vista

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 22. What is the solution?

  Hello

  The error code indicates that the device is disabled.

  The solution to this problem is to enable the device in Device Manager.

  I suggest you open Device Manager.

  To open the Device Manger refer to the link below

  http://Windows.Microsoft.com/en-in/Windows-Vista/open-Device-Manager

  (a) once you open device manager scroll down and look for network adapter

  (b) click network adapter and expand the list.

  (c) right click on the Broadcom 440 x 10/100 integrated controller and Select enable

  (d) restart the system and check if the problem persists.

• Broadcom Gigabit Ethernet works on Windows 7, but does not work on Windows 8. (Error code 10)

  Hello!

  I telled main things in the title.

  Things I've done:

  Checked device Maneger, code 10 error.

  Downloaded the driver and paste the .sys file in the system32\drivers. Same thing. After I removed it, but the same thing happens.

  I wanted to install the latest driver, error code 10.

  What is the problem?

  Hello

  Thanks for posting your query in the forums of Windows.

  I understand that you have found the error code 10 on the computer. We're really sorry for the inconvenience caused to you. We will help you solve the problem.

  A Code 10 error is generated in the Device Manager in one of the following situations:

  • Device Manager cannot start the device.
  • One of the pilots who needs the unit does not start.

  Error Code 10 is mainly related to devices and hardware driver problems or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  Which is exactly the model of the Ethernet card?

  Given that the unit was working fine with Windows 7, you might face this problem because the device driver is not compatible with Windows 8. I advise you to download the latest driver from Broadcom site and then try installing the driver in compatibility mode.

  You can follow the link given below to install the driver in compatibility mode.

  What is program compatibility?

  http://Windows.Microsoft.com/en-us/Windows-8/what-program-compatibility

  Make the programs more compatible with this version of Windows
  

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• How can I activate my card Miniport Tun Microsoft? Get the error code (10) the device can not be started.

  Microsoft Tun Miniport adapt #2 /.

  Microsoft Tun Miniport Adapter #2 / it is disabled (code 22) / this device cannot start (code 10).  I need help to activate the network adapter.

  Description: Broadcom 802. 11b / g wlan - Packet Scheduler Miniport

  Device ID: root | * tunmp \0001
  status 0 x 01802401 has problem
  0x0000000a problem (10)

  Hi GGisin,
   
  -Did you change on your computer before this problem?
   

  Follow the steps listed in the article below for the mentioned error code:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  Note: The information provided in this article are applicable to other versions of Windows XP as well.
   
  Additional reference on:
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

• error code - 50

  I was trying to update my I-phone with IOS 10.02 6.  While it was updating the phone, I received an error code-50.  the phone is now stuck and I can't seem to exit the mode "update."  What does this error code mean?

  Error code - 50 on iPhone

• I keep getting an error code (-1) cannot restore iphone message what can I do?

  My iphone 5 c don't continue reading 'no service' or 'research', but it has service through Verizon, I tried to switch to airplane mode, turning turn off / turn on the phone and restore with itunes, but during the restoration it shows error message - 1 will not restore, is there anything else I can do?

  Try to restore 2 times more. If get the same error message

  take the iPhone at the Apple store nearest for a free evaluation.

  Once the diagnosis is complete, staff will explain your options.

  -1 is the hardware failure error code. Assuming that no damage to the

  your iPhone is not jailbroken, you may qualify for a reduction

  the price of the replacement warranty.

  Make a Genius Bar reservation to avoid delays.

  http://www.Apple.com/retail/Geniusbar/

• What is the error Code (-18)

  iPhone 6 sec more

  iOS 10.0.1

  Get an error code (-18) what this code means?

  Some parts of the phone have been replaced lately?

  What's your iTunes updated to the latest version?

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• Can someone explain please the 4SNS/1/40000000 error code: TMOP - 127.875 and how to solve the problem?

  AHT error code.

  You have problems? Why do you run Apple hardware *?

  Of

  http://www.CNET.com/news/how-to-invoke-and-interpret-the-Apple-hardware-tests/

  which would indicate a bad sensor on one of your memory modules or riser:

  In the case of an error in probe (4SNS), to determine what type of sensor is referenced, look for his first letter, which should be 'I' for the current "V" or "T" for temperature, voltage.

  Then check the second letter from the list below to see which component it refers to:

  A: ambient air sensor
  B: battery
  C: Central processors (CPU)
  D: DC (direct current)
  e: PCI-express slot
  F: FireWire port
  G: graphics processor (GPU)
  H: drive
  h: heat pipe (heat sink)
  L: liquid crystal display
  M: memory or the memory riser cards

  I would first install a monitoring app like Mac Fan Control of temperature

  http://www.CrystalIDEA.com/Macs-fan-control

  to see of you can find a bad sensor by reading the memory riser card.

  You have a MacBook Pro as indicated: MacBook Pro, OS X Yosemite (10.10.5)

  Since this is the Mac Pro desktop forum

• 4SNS/1/40000000 error code: VDOR - 18.678 & 18.679

  MBP early 2011: I just ran the AHT twice, the first round gave me an error code of 4SNS/1/40000000: VDOR - 18.678, second inning gave the code 4SNS/1/40000000: VDOR - 18.679. Does anyone know what are these error codes? My best guess is probably the RAM, I have (2) modules of 8 GB 1600 Mhz DDR3 OR wireless networking equipment installed. I've noticed recently while multitasking, the wifi connection seems to cling and web pages will not load/downloads will pick up. But the way in which applications will be blocked for 60 seconds makes me think of a bad situation of RAM I have had in the past. Any help would be greatly appreciated since the nearest bar genius lies in 2 1/2 hour. Thank you!

  No RAM - 4SNS is a sensor error.

• Transcend Jet 360 Lite SD care & "the operation cannot be completed because an unexpected error occurred (error code - 50)"

  Have used the SD Transcend 360 256 MB card for data storage with success during the last 6 months on my MBP to mid-2014.  Installed their wake from sleep early support software.

  Above error code invite you in this context: I wake up Mac in the morning after sleep.  Transcend icon "wake up" and appear on the desktop (as it should).  I check disk utility and the card is recognized.  HOWEVER, about 1/3 of those mornings, despite appearing and functional map icon (folder open when I click on it), when I try to write/copy a file or folder to it, I get the above error code?  For about a week I missed that everything seemed normal.  My current 'fix' is to eject the card (requires a 'forced ejection"which I'm concerned could damage the card?), but the card ejects without delay.  90% of the time when I remove and reinsert the card, the operating system recognizes, all right.  (There are a dozen times when I had to reboot for it to be recognized.)

  All the others did this experiment with the Transcend (I submitted a request for tech support to them with a persistent response of 'Question Mac'... (LOL).  This error has been noted several times on the Forum discussion, but in the context of external drives and with no apparent solution.  FYI, I use the Transcend (in addition to external systems) b/c it works essentially like a hard drive internal and I use it mainly for Google Drive perfectly... except for the above inconveniences.  Thanks in advance!

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Error code: sec_error_ocsp_unauthorized_request

  I'm NOT going to be nice. Here's the description - I disabled the option "question responder OCSP servers to confirm the current validity of certificates. Has no effect. Still, I get this error:

  An error occurred during a connection to * removed * .com. The OCSP server refused this request as unauthorized. (Error code: sec_error_ocsp_unauthorized_request)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  You... don't even leave the website to load. Try again. Try again. Try again. Try again. Try again. Try again. The certificate of the site is very well as evidenced by SIX different sites of the verification of the SSL certificate. I can't add an exception because FF is unable to obtain the certificate.

  I tried to clear all - cache, cookies, history, blah blah blah

  I am so bored of you people cost me more time.

  It's fine in IE and Chrome.

  If I didn't need Firebug, I would switch to Chrome right now.

  edited because of the language according to the rules-forum-guidelines

  You're right, it is not sensible.

  Never made an exception for the site.

  FINALLY, what worked was rename the cert8.db file in the profile folder so FF could generate a new. Then FF grabbed the cert very well.

  Thank you for the help, sorry for the earlier rant.

• 4005 and 4013 error codes

  Air, 16G iPad. tried to install the latest iOS update. ultimately received 4005 and 4013 error codes. What do these codes mean and how can I fix the problem?

  Try troubleshooting on this page: If you see 9-4005, 4013, 4014 error when you restore your device iOS - Apple Support

• Suddenly MSEssentials 0x800703eb error code is after the recent installation of firefox 4. Any connection possible? no other recent activity or facilities

  MS Security essentials is coming with "your pc could not be analyzed" error code 0x800703eb. This occurs the day after the installation of Firefox 41 with no other facilities important program or activity for some time. We had no other software security for several years, which doesn't seem like a cause as possible. Any ideas or suggestions? Others noticed and reported similar problems?

  Thanks for any help
  Hans

  Hello

  So far, 41 Firefox installation is clean. Because your question is related to Microsoft here certain Threads are related to your problem. At the same time you can contact Microsoft Support

  I hope this helps.

  Thank you!

• Error code: How can I get an item in the Recycle Bin?

  I can't put a webarchive into the trash.  Error message says, "the operation cannot be completed because one or more required elements was not found (error code - 43) how can I get the item in the Recycle Bin?

  reset

  then try again.