M630Z scan colors are not yet close to being accurate scans colors

Similar Questions

• Some or all of the requested samples are not yet acquired: API change responsible?

  My Delphi program, which works very well under NOR-DAQmx 8.9.0f4 on a set of material, fails under 9.0.0f2 on what I received insurance material is equivalent. The error is «some or all of the requested samples are not yet acquired...» ». This happens even to slow scanning rates, and coming to suspect that the API has changed subtly in the transition from version 8 to 9. What is the probability is it? Now that I have access to the source code on the new hardware (NI PXI-1044 with computer integrated PXI-8110) is there something I can do to check this?

  Hi Francis,.

  Your program still calls DAQmxCfgDigEdgeStartTrig() for all the tasks of the slave? If you do not do this, the devices are beginning to acquire data at the same time, and since you pass 0 for the timeout parameter to DAQmxReadBinaryI16(), out-of-sync devices could certainly time-out errors.

  In addition, you must ensure you start the slave devices before the master device, so that they're already waiting for a trigger at the start of the master device.

  Brad

• Gel application - "the required samples are not yet acquired.

  Hello

  I have a vi that controls a test bench. The vi was created using Labview 8.6. Vi works fine and controls to the test correctly when running on the pc where it was created in the full version of software development (which is not converted into a stand-alone executable).

  The problem occurs when I create an executable file and try to run it in another pc. Initially the application seems to work ok but then after a random time (anything between 30 seconds and 12 hours), the application starts to turn slowly and then loses communication with the hardware (cDAQ-9178). After what happened when I opened MAX and try to run the task I get an error message that says that «some of the requested samples are not yet acquired...» »

  When the application starts to slow down, I see a reduction of the available physical memory and one of the CPU usage increases to 100%.

  I built the application using Labview 2012 and use MAX 5.3.1 on the pc hosting the executable file.

  Below, I have included a screenshot of the area of the block diagram which is probably more relevant to solve this problem. In MAX, the task is set to continuous samples, 1 k samples read at the rate of 1 k.

  Anyone have any suggestions for me to try please?

  Thank you

  So now, you can try what BCL@Servodan suggested. Create and launch tasks with DAQmx before your loop and see if it helps. Remove the timed loop would be also advised, and you set the sampling frequency before the normal while loop, as in the official example.

  This would not require too much effort and can help...

• Conversion of PDFs to word, excel etc. - subscriptions are not yet supported in my country. What should do?

  Conversion of PDFs to word, excel etc. - subscriptions are not yet supported in my country. What should do?

  You can buy and older Acrobat who uses a serial number that Creative Cloud now includes Creative Suite Master Collection and Design Premium features

• Subscriptions are not yet supported in this country - how can I subscribe?

  Hello! I try to combine files in Adobe Document cloud, but he said that subscriptions are not yet supported in this country (US). What should I do? Thank you!

  Hi lapinayski,

  Adobe online services Acrobat are supported in the United States, please follow this link https://cloud.acrobat.com/combinepdf and make sure that you use email ID created in the United States to subscribe to the service.

  Kind regards

  Nicos

• subscriptions are not yet supported in this country. But I purchase this license. Could you please help check?

  subscriptions are not yet supported in this country. But I purchase this license. Could you please help check?

  Hi Tricia,

  In Tiawan, you can buy Creative Cloud for individuals & students and teachers on https://creative.adobe.com/plan .

  Creative cloud of the teams available through resellers: http://adobedealreg.force.com/PartnerSearch?lang=en

  You can check out: http://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-m atrix.pdf

  I hope this helps.

• Automatic backups made in libraries that are not yet open?

  I'm familiar enough with FCPro X (using the latest version 10.2.3) but I saw something for this, I don't really want.

  I hope I'm wrong!  That's why I write here

  When we are editing in a library, FCPro is automatic backup library every 10 or 15 minutes or more. (Don't know how many times, but not important here.)

  It's a good idea that Apple did this.  Always nice to have automatically saved versions.

  But what I found, is if we said, 10 different projects, we are working on--which means 10 different libraries on our hard drive FCPro creates these libraries for backup automatically on all 10 libraries!  Even if we have not opened a library for 6 months, it still gets automatic backups!

  Sometimes the backup of the library can be 30meg, or so, if we are changing for 3 hours - find us in each of the 10 libraries there are several automatic backups created - even you of course, nothing has changed in the library!  Maybe 8 of the 10 have not yet opened and yet in the "Final Cut Backups" folder, there will be a few hundred meg of backups automatically: of course it must, because backups are in libraries, we haven't yet opened!

  I know not how to disable this feature - so FCPro stops auto - and we can do separately in each library - but that's a lot of extra work, remembering that libraries are "automatically backup" and which are not.

  I guess I want to come is that we would like FCPro continue to automatically back up the libraries that we change in French - but I'm correct that it also backs up the libraries that we don't even open using hundreds of megs of useless data.

  All I want is the feature of works as is, but only when opening a library - NOT in others who have not been affected.

  I am writing to be sure I understand it.  This doesn't seem to be the case?  Is there a way to tell FCPro (not for each library separately) only to make automatic backups in I work in libraries?

  Thank you for reading this... what I hope I am WRONG!  And there is a workaround or something?  It's just a nuisance to have to remember to turn on all the automatic backups on 'OFF' of each library - but then activate it when you work on 1 or 2 - and then turn them off again.

  Any thoughts?

  Thank you

  Larry

  Larry Cohen wrote:

  If we say, 10 different projects, we are working on--which means 10 different libraries on our hard drive FCPro creates these libraries for backup automatically on all 10 libraries!  Even if we have not opened a library for 6 months, it still gets automatic backups!

  Sometimes the backup of the library can be 30meg, or so, if we are changing for 3 hours - find us in each of the 10 libraries there are several automatic backups created - even you of course, nothing has changed in the library!

  All 10 libraries appear in the library list? If they are, why not close those that you don't need for this session?

  That said, I never had what you describe. Where these libraries are stored? Is the drive (or drives) in the OS X Extended (journaled) format?

  Russ

• The photos are not yet (printer Photosmart 7510)

  1 HP Photosmart 7510

  2. Windows 7 64 bit

  3. There are no errors.

  4. I don't have any changes.

  Hello, HP Support.

  I just bought a new HP printer to replace my old HP C4280 printer. Although fine print pages of the letter, I'm struggling to print 4 x 6 photos. Printed images don't print not evenly to the edges of the photo paper. I thought that I put in the incorrect photo paper so I took the photo paper and put it again. Unfortunately, the photos are always printed evenly to the edges.

  Here is an image showing the problem:

  

  I also fought with the same problem and noticed that there are not any helpful solution. After an hour of fiddling and realize that many other people have the same problem because of the design of the printer and the inability of technicians to understand the problem, so I decided to share my solution:

  1. first remove the photo tray and paper in the main tray.

  2. now, look at how work the main input tray sliders... To adjust the front and back after installation of the paper to ensure that it feeds correctly. If this is not the case, the document will at an angle and therefore the white frames uneven or break printing. You can see that the paper comes to tilt slightly and with lines

  3. make sure that put you the paper in the main tray outright and that the two blades are aligned with the paper squarely against the back of the tray.

  4. now make the printer alignment. If you have inserted the paper correctly, you will see that patterns of alignment are also directly and have some space before you start, not not against the side of the paper...

  5. now print a photo in the main paper tray A4/letter... If the document has been inserted correctly in the main tray and you have deselected the option border to print full coverage of Letter/A4 plain paper.

  6. once it works, you can introduce the photo tray again and starts the photo printing. They should also print correctly now.

  Hope that this help that I was about to box this printer and ship back to HP until I thought the paper was poorly supplied due to a bad main tray hugging design which weighed the alignment of the printer, this stuffing your photo printing as well...

  Good impression

• BlackBerry downloads of this software passport are not yet available in your country for regulatory reasons. Please check for future availability.

  Hello

  Whenever I try to connect my passport to my laptop, inviting me to visit a link and trying to doanload Office Manager, im getting:

  • This software download is not yet available in your country for regulatory reasons. Please check for future availability.

  IM living in Sierra Leone.

  Found the problem. Uninstall the Desktop Manager and re-install from the device.

  All the work perfect.

  Thanks for the follow-up

• My sword teeth are not yet

  OK so I'll try to model a sword I've seen in a trailer, the first step is to draw a reference, I did it artificial intelligence, but I don't use it very often so I'm kind new to it, how do I make the sword even teeth? They are not the same size, because I lured him given free in a way by looking at just the frame of the video...

  Start by drawing a tooth and then use effect > Distort & Transform > transform to create the rest.

  

• I downloaded the update to FF twice, but the web sites are not displayed despite my being on the page. Also restarted.

  Web pages (I tried different web sites) are not displayed, but the line at the bottom of the screen indicates that I am indeed on the web site. Previously, before, I downloaded the version nerw of FF, display web pages seemed slow unless I'm assured by cursor was "large" of the space on the screen that displays the web page.

  I checked with another browser and websites I went to work and are displayed in the browser.

  
  

• Updates (optional) must be blocked if the essential addons are not yet compatible

  Example: I depend on Roboform to maintain several hundred secure passwords unique and credentials of the user. Updates to firefox often break the addon. I should be able to say thank you to any updates until the addons have caught up.

  At the present time, which requires an uninstall firefox and reinstalling the older version.

  (a) is there a better solution to workaround?
  (b) when the (delay until addon compatible) option will be made available?

  Third party products/software (e.g., Roboform, Adobe Flash, RealPlayer, products firewall-AV/AS, etc.) should be checked periodically by the user for the updates. Some third-party products, including Roboform, install an add-on (toolbar or another) in Firefox. Keep the third-party products updated is also important to keep your operating system updated.

  Regarding the Roboform and their version compatibility page: http://www.roboform.com/support/news (information I found on the internet indicates that Roboform 7.6.3 was released on 10/11/2011 - two days after Firefox 8 is out. Many/Most of third party vendors won't release updates before or shortly after the official public release of a new version of Firefox).

  For example, on the date of your original question, you must update the following third-party products who have installed 'Plug-ins' in your Firefox:

  • These would be covered in the lower part of my post 'not related to your question, but... "You may need to update some plug-ins '
    • Shockwave Flash 11.0 r1 (aka Adobe Flash) - you are at least one or more updates to date behind
    • Adobe PDF plugin for Firefox (Adobe Reader) - you are at least one or more updates behind
    • Next-generation Java plug-in 1.6.0_20 (Java) - you are 9 updates behind
  • The QuickTime Plugin - you must check with the QuickTime site
  • Foxit Reader plugin - you need to check with the Foxit website
  • npFFApi - part of ZoneAlarm Toolbar; You must check with their website. The current version is 10.1.065.000.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• How to uninstall fonts that are not yet listed?

  I have a font that is really exotic and I don't find it in my list of Windows fonts to remove. Anyone know how I can get rid of him?

  I bought the HP system recovery discs but am wary of their installation.

  Thanks in advance for any help.

  Have you installed any software or display fonts as suitcase or Font Explorer?

  If not, the fonts are removed in one of two ways: by using the control panel-> Fonts, locate the fonts in the list and delete it - or - work stations, find the name of the policy file (which may be different from the name of the font), remove it.

  That said, what is the name of the font? What was it? [OpenType |] TrueType | PostScript Type 1] what was the source? [Provided with windows |] Came with another application {application name, please} | Got source commercial/shareware/freeware] what is the name of fonts in font of the registration program? What is / are the name of the file/s?

  Tom Ferguson

• Search for Windows 7, why not if give me the files that are not yet in my augument search?

  Windows 7 Home premium 64-bit OS.

  Have a lot of files are duplicated.

  In Windows 7 lets say the files in the folder have files that look like:

  Bill 120.le rar
  Bill 121, rar
  Bill 1 .rar

  and we want to remove duplicates with '(1) '.
  and we enter research * (*)

  Under XP it would only list the file: Bill 1 .rar IF you entered *(*.)  or *) * or (1), etc.

  Bill 1 .rar

  In Windows 7, since I started to use Win 7 years, everything I do is get frustrited when it will sometimes give me what I ask for the Bill 1 .rar.
  but most of the time like now, will give me ALL the files WITH and WITHOUT the "()".

  Bill 120.le rar
  Bill 121, rar
  Bill 1 .rar

  WHY?  and how can he give me what I asked?

  (I tried ALL the settings and they all do the same thing)

  Enter in the search box:

  name: ~ = "{}"

  The ~ = indicates to Windows 7 search to look anywhere in the name.  Usually, the quotes would not be needed, but( ) has a functional use of search for Windows 7, and the quotes tell Windows 7 search just deal with ( ) as a chararacter.  I tried to find a way to search for a (?), after? as a wildcard but couldn't.  [Update: solution concludes, at the end of the post]  However, you can enter this to search for files named with the two ( and ), but not necessarily appearing in the (#) form.

  nom : ~ = "(" nom : ~ = "")" »

  or more compactly,

  nom : (~ = "(" ~ = "")" »)

  Update: more than a month later, I realized the more compactly.  Subsequently, the? is interpreted as a wildcard character.  If more digits is possible, then additional search with? exactly two for? for exactly three and so on.

  Name: ~ "* (?) *"

  If filename: is used instead, then the tilde is redundant:

  filename: "* (?)" *"

• Can't download apps: everything seems up to date (but they are not yet installed)

  Hello world

  I have this problem:

  I installed creative cloud app for Mac months ago, so I downloaded and successfully installed PS, I, ID, DW, FW and Acrobat.

  At the beginning, I received all the update without problem... and then, a month ago all the apps look constantly updated, without downloading anything.

  I'm not getting updated.

  When (this month) I received an email from Adobe with the announcement of new features added in PS / HAVE / Acrobat, I looked in my version and none of the updates seem to be installed (for example: corners to live in artificial intelligence).

  BUT all the upgraded applications.

  Strange thing, but to the workaround to upgrade:

  (1) I closed CC app Manager

  (2) I uninstalled PS and AI and Acrobat (using app unistaller in their folder)

  (3) I restarted the computer

  (3) I re-opened CC App manager

  At this point, all applications seem to be listed in the app Manager CC as already installed and updated... but they are actually UNINSTALLED.

  And, since they are "settled", I can not even download this apps.

  I try to uninstall and reinstall CC App and restart the computer. Same thing. All uninstalled applications look installed.

  .. Now, I can't work without having to download!

  Sonia

  (PS sorry 4 my English)

  Run the cleanup tool and try again:

  http://www.Adobe.com/support/contact/cscleanertool.html

  Mylenium