M91 need card mother specifications

Similar Questions

• Need card mother manufacturer of VPCEG2DFX service tag # C90289A1 moderator please.

  VAIO no power lights sur-pas. E-mail support - they just got told to fix, I'd rather do it myself as the repair cost might cost as much as a new laptop.

  Hi mojoman,.

  Thanks for providing the service number. The part number for the motherboard would be A1853639A. I hope that everything works!

  ~ Mark

  http://bit.LY/win-4k

• Need drivers chipset card mother AmethystM (MSI-7184), for Vista 64 bit OS

  I'm looking for the proper chipset drivers, or compatible drivers, for the card mother MSI-7184. The chipset is ATI RS482 & ATI SB400. Specifically, I'm looking for the following drivers:

  PCI express filter driver - currently using Catalyst 8.3 ATI PCI Express (3GIO) Filter Driver

  Configuration AMD address map - currently using the standard driver microsoft

  HyperTransport (MC) Configuration of the Trace Mode - currently using the standard driver from microsoft and DRAM AMD

  AMD HyperTransport Configuration - currently using the standard driver microsoft

  Configuration of various AMD - currently using the standard driver microsoft

  ATI i/o Communications Processor LPC Controller - currently using the standard driver microsoft

  ATI i/o Communications Processor PCI Bus Controller - currently using the standard driver microsoft

  Communications ATI i/o Processor USB 1.1 OHCI controller - currently using the standard driver microsoft

  Communications ATI i/o Processor USB 1.1 OHCI controller - currently using the standard driver microsoft

  Controller ATI i/o Communications Processor USB 2.0 EHCI - currently using the standard driver microsoft

  Controller IDE ATA standard - currently using microsoft standard driver - it's supposed to be SATA I think that my HD is connected to it and its SATA

  Standard ATA IDE Controller - currently using the standard driver microsoft

  Bridge standard CPU PCI - currently using the standard microsoft driver - what is supposed to be ISA instead of the processor?

  PCI and standard PCI to PCI Bridge - currently using the standard driver microsoft

  I'm looking for drivers because my CPU usage is constantly at 45-60% usage. My processor is an AMD Athlon 64 X 2 4200 +. Devices and drivers of Thease are what Vista has recognized and loaded. I don't think that is correct. Any help on this would be greatly appreciated.

  Sean

  OK, I found the appropriate drivers!

  ATI drivers:

  Drivers of North Bridge: catalyst 8-12_vista32-64_sb_72277

  SMBus, & IDE drivers: catalyst 8-12_vista32-64_72274 - run the program so it extracted all files in c:/ATI do get out. Then manually install two IDE controllers and SMBus drivers by using Device Manager.

  Also, I solved the problem with the hardware interupts. The on-board USB controller and suport Legacy interfere with the video card. To fix this go into the BIOS and under Advanced, disable Legacy support. Then in Device Manager disable all three usb controllers. These controllers have been disabled as soon as the missing of interruptions. I'll get a PCI usb so I can still have USB ports.

  Message edited by shfire2000 on 01/26/2009 21:51

• 8200 elite format microtour, need of care technique for card mother/PSU

  Hello.

  I'm upgrading of the power supply in my Hp Compaq 8200 Elite format microtour.

  The /PSU motherboard uses an archaic connector that looks like a connector 6-pin inline with to the (http://i20.photobucket.com/albums/b225/r4ch3t/Aux-connector-148x200.gif). But it is connected with 4 wires (red/white, white, green, purple)

  To upgrade the PSU, I need to find a way to connect it to the new motherboard, but I can't find any information or datasheet for the motherboard or the power supply.

  Motherboard:

  SP #611834-001

  DG #611794-000

  PSEYU0JCY0W197

  AS #611793-003

  0J REV

  POWER SUPPLY:

  Model: PC9057

  PART NUMBER: 611483-001

  ALTERNATIVE NUMBER: 613764-001

  Where can I find more information about the card mother/PSU?

  What is the connector? It is standardized in some way?

  What is the combo of tensions/soil necessary for the pins?

  Thank you

  Your question would be better served in theHP Enterprise business community.  I highly recommend that you join the community and post your question there.

  This time, do not forget and give identifying information more accurate than you did in this post. In the image below, you will see how what gave you as a product identifier can be confusing.

  

• HP P6 2120t: possible cards for the card mother Pegatron IPISB-CU on a computer of 2120t HP P6

  So, I'm looking to upgrade my graphics recently. Over the months, I've been looking around and find out a lot about how work cards graphics, and I need to find one. However, what I don't know much about is the compatibility of graphics cards with card mother Pegatron IPISB-CU. I checked and I'm running on FRIEND 7.19 BIOS update 02/04/2012. It seems that I need to look for graphics cards that can work with "Legacy" BIOS. However, it's not not clear that even if I bought one it would work. I was hoping so to ask HP and the community if there was in fact a strong graphics card that would be 100% some works with my motherboard/BIOS card.

  To archive the many discussions of forums, it seems the MSI 750ti ( http://www.newegg.com/Product/Product.aspx?Item=N82E16814127783 & cm_re=msi_750-_-14-127-783-_-Product ) is my best bet because it is said to have a switch making it compatible Legacy Boot. However, read the description of the product, I have not found this mentioned in the features. What scares me.

  If someone could shed some light on what I'm working with. I would be extremely grateful. I'm ready for the possibility that there is no viable option other than buying a new motherboard and the OS, but if I can get away with upgrading my current system I would be very grateful.

  Thanks to all who take the time to read/answer

  Drew

  At the company MSI Web page in the master record for this MSI cardunfortunately didn't even State if power 6-pin PCIe connectors are needed. Also, it does not specify that there a dual BIOS or the old BIOS support. I wouldn't consider this one for your motherboard.

  You may need to upgrade the PSU as your installed PSU doesn't have 6 - pin PCIe connectors with power cable to power the card video update.

  EVGA and Gigabyte are also PCIe x 16 graphics cards with dual BIOS allowing a choice of inheritance or the EFI.

  Cards with BIOS double EVGA

  http://www.EVGA.com/articles/00767/

  I'd take a peek at the r7 of Sapphire Radeon 260 and higher and r9 in the 300 series Radeon cards. In fact, they have a physical switch on the map.

  Sapphire video card specifications

  http://www.sapphiretech.com/catapage_pd.asp?cataid=271 & lang = eng

  What is 100% certainty in the work with your motherboard, you upgrade a ready to use PC or a system as you put as well as components custom, studied and chosen by yourself.

  I suggest you buy your video card with your credit card. If this does not work with your motherboard you can return. Which takes an element of risk fomr away the attempt.

• Problem of card mother-suggestions

  I have a Desktop Pavilion p6310y and I lost my second mother. He has a Paragon M2N78 - motherboard and said that it is the only one that can be used on this computer. Does anyone know if there is another motherboard that can be used on this computer? It has a processor AMD 2.8 ghz and 6 GB of ram. I really want to buy a new computer, I just want to see if it can be resolved.

  For any help or suggestion would be appreciated.

  Bob

  Bob,

  Here are the specifications of your desktop HP Pavilion p6310y and its card mother M2N78-(Violet6). Please note that this model uses the 'VIOLET6' of the M2N78 - motherboard version and not several different version called M2N78 - LA. This model came from the factory with an AMD AM3 Athlon II X 4 630 and 6 GB memory DDR3.

  While you can replace the motherboard with a new one, Windows will become "not authentic" and you will need to purchase a new copy of Windows. Other problems that may arise,... include your recovery discs HP will no longer works, back plate I/O may not match, mounting motherboard can not align the studs, etc.. When installing a new copy of Windows, you will lose all 'value-added' original HP supplied with your computer software.

  If you're OK with every possible question of a motherboard out of factory usage, consider these cards mothers AMD AM3 + who is responsible for your AM3 Athlon II X 4 630 CPU and DDR3 memory.

  Please send Bravo

• Dell desktop computer just ran scan & system - failure of the card mother how fix this?

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  First of all - the 'motherboard' does not mean 'hard drive '.  This means that the "mother".  :-)  The drive is the storage processors is the brain and everything connects through... the "mother".

    
  Second - why sweep you all the months?  Unless you are having a problem - well - I suggest you not to do so.  Heck - you may see a false positive.  Do you have any indication that you have a hardware failure?
    
  Here's what I suggest:
  (1) stop the execution of this "free scan of Dell.
  (2) ensure that the drivers of motherboard, video card, network device and peripheral chipset audio are later you can get - on the Dell site for your specific Service and operating system combination label (drivers and downloads section, use your service number and put in the operating system you are using.)
  (3) never use Geek Squad.
  (4) what is the "MSN Help Menu?
  (5) choose AN antivirus software - two is misguided and may cause problems.
  (6) run some scans of malware with the details, I will give you right after that...
    

  Regarding AntiVirus - free are very good: Avira, AVG, Avast, UnThreat

  You could spend ~ 60USD during two years of eSET NOD32 AntiVirus (not more - just product AntiVirus) and which would be more worthwhile.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Remove everything it finds.

  Reset.

  The less you have to run all the time, most things you want to run will perform:
  

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  For the printer - you have downloaded and installed the form here?
  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=128284&infoType=downloads&platform=OSF_W_7-64

• card mother p6180t

  The p6180t uses a card mother Eureka3-GL8. I am unable to find the documentation on her that she be named as such or under the designation of its manufacture Pegatron IPIEL-A3.

  Specifically, the motherboard natively supports RAID 0 or any other RAID also. Many motherboards take now support RAID 0 natively, so I was just wondering if the jury of this model also does the same thing.

  I've had this model for sale, 'fully loaded', for a great price! I'm very happy with my purchase, but the documentation is a little weak.

  Thanks for any help.

  Take care

  Tom.

  Hi Hp_user_user,

  Hp_user_user wrote:

  The p6180t uses a card mother Eureka3-GL8. I am unable to find the documentation on her that she be named as such or under the designation of its manufacture Pegatron IPIEL-A3.

  Specifically, the motherboard natively supports RAID 0 or any other RAID also. Many motherboards take now support RAID 0 natively, so I was just wondering if the jury of this model also does the same thing.

  I've had this model for sale, 'fully loaded', for a great price! I'm very happy with my purchase, but the documentation is a little weak.

  Thanks for any help.

  Take care

  Tom.

  Here is a link to the motherboard plug.

  There is no RAID controller embedded on the motherboard. If you want to use the moterboard for a matrix RAID configuration you will need to add a. I suggest to use a PCIe x 1 controller, since you have a property available for it.

  It is regrettable that the motherboard is a Pegatron. In my humble OPINION, they are not the most reliable of motherboards.

  Kind regards

  ERICO

• Drivers Windows 7 x 64 for the card mother Memphis-M

  Hello! I bought the HP Pavilion 500-164er with Linux operating system desktop PC.

  Still, I installed Windows 7 x 64 on this unit, but I couldn't find some drivers for the card mother Memphis-M.

  I need:

  Simple communication controller PCI Chipset, USB 3.0.

  Thank you and waiting for a response.

  Hello:

  You can use the W7 x 64 drivers and software of this model that has the same motherboard as yours.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 7049404 #N543

  Chip set:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134596-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134614-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  USB 3:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134611-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

• Satellite in a series - error: conflict of resources - PCI on the card mother BUS: 09

  What started it stops early on with the error:
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 00
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 02
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 03

  I have the option to continue with F! that works.
  I use Windows 8 at the moment, but it seems not so stable. Above mentioned mistakes occurred that after awhile, I upgraded to W8.

  Do I need a new motherboard, or y at - it another option. What does this error mean in normal words.

  Hmm, it looks like a problem with the motherboard or part connected to the motherboard.
  The error indicates this device 01 because of controller 09 conflict
  Have you tested the RAM?

  Recommend doing this! You can use a tool like Memtest or similar.
  Maybe it isn't that a Ram problem and new modules could solve your problem.

• H8-1223: card mother HP Angélique Label of ports and diagram

  Put I upgraded my computer and I have a upgrade my card mother-M3970AM-Hp (Angelica2) in an Obsidain of Corsair 350 d case.  The problem is the case connectors are labeled, but aren't the ports on the motherboard.  I need to have the labels on the ports and connectors of my Board of Directors.  The case conectors are: Power SW, Pwer Led - and Power Led + and SW Reset.  I need information on the place where to connect or if these connectors at all.  I'll try to send some photos if I can understand how this Bluetooth to my cell phone.

  

  On the left is the cornerstone of HP mother.  I wanted you to see the ports that are on the map. PSWD HP LPC.  The line is the Corsair Obsidian Series 350 d connectors.  How can I connect these?  Or do I really need them?

• What card mother motherboard inside the Pavilion hpe h8xt with Ivy bridge

  You want to buy, but can't find any information on what motherboard that uses. Would love to see a pattern!

  @ Big_Dave

  Here is the card I found for the card mother HP OEM Pegatron IPMMB - FM (Formosa). The specifications indicate the decision-making is an Intel LGA 1155 (Socket-H2) and processors supported are;

  Intel Core i3-3xxxT (Ivy Bridge) Dual Core	256
  Intel Core i3-3xxx (Ivy Bridge) Dual Core	456
  Intel Core i5-3xxxT (Ivy Bridge) Dual Core	256
  Intel Core i5-3xxxT (Ivy Bridge) Quad Core	152
  Intel Core i5-3xxxS (Ivy Bridge) Quad Core	756
  Intel Core i5-3xxx (Ivy Bridge) Quad Core	676
  Intel Core i7-3xxx (Ivy Bridge) Quad Core	676
  Intel Core i7-3xxxK (Ivy Bridge) Quad Core	676
  Intel Core i3-2xxx (Sandy Bridge) Dual Core	756
  Intel Core i3-2xxxT (Sandy Bridge) Dual Core	256
  Intel Core i5-2xxx (Sandy Bridge) Quad Core	95W
  Intel Core i7-2xxx (Sandy Bridge) Quad Core	95W
  Dual-core Intel Pentium G6xx (Sandy Bridge)	756
  Dual-core Intel Pentium G6xxT (Sandy Bridge)	256
  Dual-core Intel Pentium G8xx (Sandy Bridge)	756

  and supported memory;

  Dual channel memory architecture
  Four DIMM DDR3 240-pin connectors

  Supports DIMM DDR3 modules

  PC3-10600 (1333 MHz)

  PC3-12800 (1600 MHz)

  Memory non - ECC, unbuffered

  Supports 1 GB, 2 GB and 4 GB DIMM

  Supports up to 4 GB on 32-bit systems

  Supports up to 16 GB on 64 - bit systems

  Frank

• Questions card mother ThinkStation D20

  Hi I was wondering the card mother D20 does support Geforce SLI? Ordinary GPU not of Quadros?

  Also I was wondering what is the shape of the motherboard? Is it E - ATX or ATX?

  Welcome to the forum

  SLI is only supported by Quadro in workstations. It is a limitation by NVidia, not Lenovo. Very few applications workstation (CAD/DCC/oil/gas/etc) supports either benefit from SLI anyway so diminishes the need of this.

  Map of the D20 system is a layout owner but closer to E - ATX. You need to change your D20 chassis if you are planning a Board from the aftermarket. The spacers will be the biggest obstacle with wiring being a close second.

• Satellite A100-192 card mother Question

  Hi, I need your help to indciate what is the motherboard model number for the below:

  Satellite A100-192
  Part number: PSAA9E-01Y01QAR
  Series # 56817119 G

  Appreciate your feeback.

  Kind regards
  HMI

  Hello

  It s a card mother Toshiba ;)

  But unfortunately, I didn't find useful reference numbers, but don t worry PAL advocate you the ASP in your country and could ask the compatible motherboard.

  You can ask only the part number or you can order these parts directly from the ASP.

  I think that this should t be a problem.

  Good bye

• The card mother MS-7184 (AmethystM) in my old HP PC takes in AHCI mode?

  First of all, thank you for taking the time to read my post!

  I recently bought an OCZ Aligity 4 256 GB SSD drive. I want to use the SSD as drive replacing the original hard drive in my old HP Pavilion Media Center TV m7334n desktop PC. Here is the link to my pc:

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=1821850

  I know that the motherboard identified on the Web site above for this model of PC is A8AE-(AmberineM), but the motherboard I have is MS-7184 (AmethystM), the specifications of the motherboard is here:

  http://support.HP.com/us-en/document/c00378480

  I updated the BIOS with the latest version (3.47, 03/03/2006) I can found on the HP website. In the BIOS, I can't find any info on the AHCI support. My questions are:

  1 - is the card mother MS-7184 (AmethystM) in my old HP Pavilion Media Center TV m7334n Desktop PC support AHCI mode?

  2. how to configure CMOS when I use the SSD as my main drive on the old HP computer?

  Note Please that I have aleady copy drive hard whole orginal on the new SSD and I started my computer on the new SSD. This works. I have another post questions on the recovery of the system on the SSD, the post is here:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g/system-recovery-doesn-t-work-on-cloned-SS...

  Thank you!

  You are the very welcome.

  I leave these settings at their default values.

  You have the SSD connected to sata port, and it must operate to the maximum 150 Mbps transfer speed, 133 or 100 no matter what readings are displayed, as would an IDE drive.

  The problem is that since there is no AHCI setting, the drive cannot enjoy the native command files or TOPPING.

  Aside from that, an SSD should be better that a standard SATA I mechanical drive or IDE hard drive.

  Even subjectively, you should 'see' a difference in sensitivity of disc, not you?

  Improved time, faster startup time for research, for example.