m9515y Desktop turns on works perfectly then turns off after 10-15 minutes

I have a HP m9515y, who recently has been giving me nothing else problems. When I turn on the computer, it will stay on and work perfectly about 10-15 minutes, then stop responding, show nothing on the screen and the hard drive turns off light. The machine itself is still on and the hard drive still works as I can feel the drive operation. I'm pretty positive that it's not the hard drive because it works fine when I plug in the machine to another. The fans are always on the graphics card fan is always on, everything stops just to give me answer. There is no error message, warning or anything else say that there is a problem. I've tried everything I can think of and am led to believe that the motherboard has failed. If there is something else that could be the problem, I would greatly appreciate help. Thank you!

Did you try to remove the video card and then use the edge video card?

Tags: HP Desktops

Similar Questions

  • LCD screen turns off after a few minutes

    My screen turns off after a few minutes, even if the parameters to be able to say that he should turn off after 60 minutes of no activity.  Before this date should activate the screensaver after 10 minutes of no activity.  But in my case the active screensaver ever and my right monitor fades to black.  What can I do to fix this?  Is there a registry setting that has changed I don't know?

    -penciline

    I checked power options, the first thing, and then I checked the (NVIDIA) graphics card Control Panel to see if there is a setting for it.  The figures that I had in my previous post came from my power options, but I don't know how standard power who do not have the numbers that it would affect the schedule/performance options.  I went to advanced settings.  But I also rebooted my computer which solved the problem, in my opinion.  I'll have to sit and wait to be sure, but I'll get back to you on that once I have test.

    -penciline

  • Satellite A30 turns off after a few minutes (set temp)

    Anyone know if there is a temp for the A30 laptop parameter. My laptop turns off after a few minutes or alternative suggestions

    Thank you

    Hi Waseem,

    Dust accumulation is not in the fans themselves, but in the space between the fans and the CPU radiator, where it is trapped by the matrix of cooling.

    The technique of using a hose of vacuum cleaner against the fan grids is designed to suck the dust outside in front of the fans without having to dismantle the radiator.

    Obviously, you have just as much suction as possible in order to remove any dust, it is therefore important to isolate grids of aspiration air with a cloth.

    Kind regards

  • The display turns off after a few minutes and shows 'No Signal'

    Hey guys, I was faced with a weird problem recently. My desktop monitor turns off by itself after a few minutes, but the works of CPU, I can hear the fan running and see the lights blink. One thing I noticed, is that when the screen turns off, the light Orange on the processor rest on which flashes normally just. My PC works normally on the mode without failure, but worse, safe mode, but I can't work on my software CorelDRAW. This may be the problem of SMPS? because recently, my entries of mouse and keyboard did not work due to which I got a USB keyboard and a mouse. I recently installed Windows 7 64 bit, but I think that shouldn't cause the problem since I have worked with Windows 64-bit before on the same machine.

    PC configuration-

    Intel Core 2 Duo 4500 @ 2.20 Ghz processor
    ASUS P5QPL-AM motherboard
    3 GB RAM
    No (not sure, maybe integrated) graphics card
    1 TB harddrive

    PS - I couldn't find an exact category for my problem.

    Hey Archer
    Currently, I formatted my Windows 7 and installed Windows 8 and am these problems persist. I have not upgraded but formatted my C drive and installed a fresh new copy of windows 8... so I thnk it may be a problem of the SMP. Can he?

    Hi sunny

    It can or mentioned being SMPS... the reason is... you have already said that the computer or the monitor works fine in safe mode! But since his past even when you install Windows 8,
    To make troubleshooting a
    1. go to the Bios and reset all default by selecting the optimum setting in the bios... Given that your motherboard has got characteristic overclocking and selection of the IGD... let him get by default...  Start the computer and check if the monitor turns off always.
    2. If step 1 does not solve your problem... then go to the power option in the control panel and select your power setting of the high-performance system where you can set your monitor to never go to sleep.  See what's happening... If the monitor still going to sleep even after this setting... then you have a problem with drivers or the motherboard... try updating the drivers and see if that helps.
    3. If the update of drivers did not help... so the next option is to review your material... try to get a replacement screen and see if this could solve this problem... A things you can deduct that if this also fails, then the obvious reason is that your monitor is ok... and problem must be the motherboard.
    4. Firstly check the display port... does it feel loose?
    a. do you have this port pins come out?
    b. your motherboard has two power connections (EATXPWR 24-pin and a 4-pin ATX 12V... are both connected?
    c. your SMP should be at least 400W according to recommendations from the manufacturer to you. Check this box...
    d. then ofcourcse obviously... Reinstall the Rams and other external devices.
    Follow these steps and let me know your comments for each
  • HP Pavilion HPE h9 - 1120-t Phoenix - PC suddenly starts turning Off after a few Minutes of use

    Posted this on the Forum for questions of another office before I reduced the problem.  No one answered:

    http://h30434.www3.HP.com/T5/other-desktop-PC-questions/HP-Pavilion-HPE-H9-1120t-Phoenix-PC-suddenly...

    Announcing this computer from July 2012 and not even a hiccup.  4 days, the computer suddenly began turn power off. It doesn't stop, it turns off, the plug was pulled. When I reboot I get the message of abnormal termination of Windows.   There is no warning at all.  No message as the computer is overheating.  He comes to occur when the computer is idle without programs will open.

    When it stops, the power supply unit light goes out for a minute then comes back on the 'green' and the computer can be restarted.

    I unplugged the power cord and relugged and it seems fine.

    The computer is aware of the updates of Windows and can be stopped normally.

    I removed the cover and clean the dust and confirmed all fans are running properly.  I left the lid off the coast, and the computer stops again.

    I must add that when the computer is started 'cold' it runs about 15 minutes.  If you restart after it just closed, you have maybe 3-5 minutes of use.

    Why did you think it was overheating.

    Any ideas?  Thank you.

    Specifications of the computer:

    What thermal paste on the processor?

    There are two programs, you could download to monitor the temperature of the CPU

    Speccy free:

    http://www.Piriform.com/Speccy

    or Core Temp

    http://www.alcpu.com/CoreTemp/

    Another possibility is a PSU fault

    http://ryansccs.HubPages.com/hub/how-to-tell-when-computer-power-supply-is-failing

  • New Sansa Clip + turns off after a few minutes of play audiobook...

    Hello

    I was wondering if someone could help me.  Have been enjoying my new Sansa Clip + for the past two weeks.  Just been using the function of radio - finally understood how to load an audio cd on the drive.  The drive is recognized on my computer, and audio tracks are in the player very well.  When I start the audio book, the player will stop after about three minutes of play.  I need to do a soft reset before it turns on again.  This happens whenever I try to read the audio book.  I have not loaded all of the songs on the player at the moment and I was wondering if this problem was something I got wrong, or if I was just a faulty drive.  This is my first mp3 player, so I'm new to this. :-)  The radio and the pre-loaded songs work fine.  I contacted the customer service, but have had no response.  Thought I would try the forum before you give them a call.

    I hope someone can help,

    El

    You must use a ripping software and extract the mp3 or wma files. The Clip + probably does not even support .wav files.

  • Satellite Pro 4600 PS460E turns off in 3-4 minutes after the connection

    My Toshiba laptop is having problem that it turned off after 3-4 minutes of connection.

    He doesn't get turned off when we run it in safe mode.
    Pls let me know how to troubleshooting this problem.

    Hello

    Can you please tell us which model of laptop you have exactly? This laptop model older or newer?

  • Equiium series A - maintains turns off after 20 minutes

    My laptop turns off after about 20 minutes of use. I checked for dust and clean battery etc. Any other suggestions? It has been suggested that I have to find and fix bugs in C drive but I don't know how - as any help much appreciated.

    Is what model laptop?

    Dust in the heat sink is often the cause.
    It can also be caused by a dry heat pipe (liquid escaped), or dried up CPU thermal grease or a failed fan.

    Or its possible that the power adapter is faulty, or she cannot provide enough amps, or a power adapter non - Toshiba is used.

  • After the upgrade from Office 2007 to Ofice 2010 on my Vista, then my computer turns off after being idle for a while.

    After upgrade Office 2007 to Office 2010 on my Vista, then my computer turns off after being idle for a while. When I turn on my computer, I get the splash screen indicating that Windows has finished unexpectedly and I would like to start in safe mode or normally (pluss a couple more choice...).

    Appears not to occur if there is activity going on--as if do me some work or have itunes playing music or I'm just surfing the internet. Curiously, it seems not to happen if I close Internet Explorer and Outlook.

    I shot all automatic updates for Windows Vista (32 bit) and Microsoft Office.

    Concerning

    B Odd Andersen

    Hi B Odd Andersen,

    I want to clarify if your computer seems to be sleeping or it completely closed after being idle for a while.

    Method 1: If the computer is in power saving mode, check if you can wake the computer from this State by moving the mouse or pressing any key on the keyboard.

    Method 2: Change the power to another and check to see if the problem persists
    Change, create, or delete a power plan (scheme)

    Method 3: check the logs in event viewer for more information on auto-off down

    Open event viewer

    What are the information in event logs? (Event Viewer)

    Note: For your safety and security, it is not recommended to disable Windows Update.
    Activate the update or disable automatic

    Thanks and greetings
    Ajay K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Can not turn on the monitor on the Satellite once the display turns off after 10 min

    Hello..

    I have a problem with my laptop...

    When the screen turns off after 10 minutes, it no longer lights!

    I move the mouse, try typing on the keyboard, but it does not work...

    to activate the display again once I should close the lid for the hibernation, then open it again!

    I hope that you will help me @_ @!

    Hello

    Check it please http://support.microsoft.com/kb/917332/en-us
    To correct the behavior please download and apply the patch (KB917332) which could be found in the resolution detailed below. I hope this will help.

  • iPhone 6s turns off after start upward with 30% of remaining battery

    6 s iPhone will turn off after starting with30% battery left please help

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

    More info here:

    https://support.Apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • System does not boot up... message is... "" peripheral USB on the detected... current situation system turns off after 15 seconds.

    I recently bought a new golf gps device and connected to my desktop pc to register. After unplug his computer m USB cable I can't start my computer.

    whenever I start it the pc his usual routine, but then I saw the following message... USB device to the system detected. System turns off after 15 seconds.l

    Fifteen seconds after the system shuts down. It wiil also not afford to start or access the safe mode, the program installation or any other type of recovery mode, I could access normally. It will also not recognize my Win XP installation disc. I guess it's because of the configuration of the BIOS which accesses the hard drive before the CD rom drive.

    The problem was obviously created by the golf gps USB cable but I can't find a way to get the system to boot so I can find a way to eliminate the problem.

    Thanks for any help that anyone can provide. I am running WinXP Sp3

    Hi PAULARUNNELS,

    ·         What happens when you try to start in the Advanced startup options?

    ·         You receive the same error?

    ·         You external devices connected now?

    Try the following.

    Method 1: Disconnect external devices not essential, connected to the computer and restart the computer.

    Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer. Make sure that you have the CD drive set as first boot device. Check the settings by consulting the manual or call the manufacturer to do so.

    Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

    Method 3: If you are unable to start on one of the advanced startup options, and then you can follow this article.

    How do I recover from a corrupted registry that prevents Windows XP startup

  • Computer Toshiba laptop turns off after 3 seconds

    I can't understand what is happening with my computer, but I hope that this information will help you. Any ideas would be greatly appreciated.

    There are 3 computers involved. One is a Toshiba laptop Satellite L300D Vista I had in December 2008 and the other two are Toshiba Satellite M110 XP portable computers that we got in December 2006 I think.

    The problem started with the Vista. It stops just one day and when I tried to turn it back on, it would show the Toshiba screen for a few seconds and then die. He was the life of the battery. Tried everything, could not, so I have restored the default computer. After it's on, I loaded my music in my external hard drive and a few days later, he crashed again. I restored it again and load my music back in, and then a few days later, he crashed again. Now when I try to restore it, it does not accept the restore disc. The hard drive flashes orange several times and the disc not spin fast enough to start doing anything.

    I decided to forget the vista computer, I had a year and a half... And started using my xp computer is a few years old. I've ONLY used to browse Craigslist (after I started using it instead of my Vista computer for a few days, after that the Vista) and not load any music in there. This computer has worked since then, but about a week after the death of my vista, my xp now has the same problem. It turns on for a while and then turns off immediately. Since they are the two Toshibas, they can use the same chargers so I would use the charger that comes with the vista or another, that I got off eBay a few years ago. Been using two wires forever and then everything suddenly this question not sure that it of a problem with the power or not, but one thing I noticed was my vista computer would make a rattling noise from inside the computer only when has been plugged in the charger from eBay, and I noticed my xp making the same sound as that connected with the charger from eBay just before you die too.

    My brother also has a toshiba satellite m110 xp laptop, and we tried a few things with the vista computer to try to make it work. A site offered to take the RAM and try to turn it on. Nothing that's happened. We took the ram from my brothers computer which works very well and put it in the vista. Nothing happened. We took the hard drive from her computer and put it in the vista and the computer DID start up (which was great cause I've not seen on in about a month) but it started up to a blue screen. Put us the hard drive in my brothers xp and the computer was working fine... For a few hours. Now the computer will not start correctly and we are trying to restore his computer but couldn't find the restore disc. Her hard drive was in my computer literally 15 seconds and his computer is now toast.

    I don't care about my laptop toshiba satellite m110 xp, but I want a solution for my toshiba laptop satellite L300D vista, and I also want to get my brothers running again because I ruined. I don't know much about computers, but my guess is that there is nothing wrong with the ram or hard drives, but something else in my vista computer that is ruining the hard drives. That still doesn't explain why my XP computer is turn off after a few seconds suddenly well. The only thing that the Vista and my XP have in common, is that they used the same power cords (which always worked fine)

    If anyone can help me out or point me in the right direction, which
    would be AMAZING! Thank you very much for your time

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    If you have problems with the Toshiba recovery media, you will need to contact Toshiba.

    It's the Toshiba recovery process.

    Each manufacturer has their own particular recovery process.

    And as it is now failing to do recovery required, they would be the best people to contact about this.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    And for XP questions:

    XP forums:

    http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

    Link above is for XP Forums.

    There is a list of the different Forums XP to the link above to help you.

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

  • The computer screen does not turn off after the specified power Options

    I tried several ways on trying to turn off my monitor of my laptop through the options of food and the use of some applications such as nircmd but nothing works every time. I'm sure it can be a program I am not using a device. I have a wireless mouse plugged into a USB port, but I know that's not what is keeping the PC awake, as always happens when it is not plugged. The thing that bothers me is I don't know how to identify this process shut off and I tried to put end as many process I can safely or those that I am knowledgeable in the subject to close. I would really like this feature back. Thanks in advance for the answers and ask if all the details are needed.

    I understood what was the 'problem '. It turns the screen of my laptop never turns off if my laptop is installed on a sloping surface, because it assumes that I'm working on it. When I went to bed my laptop on a flat level surface, is power does work normally, as reduces the brightness of the screen to the bottom, then turns off after a while. I guess it must be a form any a single function on my laptop. Thanks for all your answers.

  • Tecra 9100 comes on intermittently and turns off after 10-15 seconds

    Referring to a Toshiba Tecra 9100, model No.: PT910E-602SF-FR

    The power button normally doesn't light up at all, even if sometimes it starts normally, starts to load windows, then always turns off after 5 to 15 seconds in any case.

    It always requires the batteries very well, but it won t turn on. I ve checked the ram, hard drive and I re - set the default bios - nothing prevents to cut if you can get it to turn on.

    Any ideas what could be the problem? Any help appreciated, it s the second time I had - the same problem the last time!

    Thank you

    Hey,.

    Have you already tried to clean the fan? Maybe a lot of dust blocking the fan for laptop can start t, and then turns off itself due to a higher temperature. It would be interesting to try to clean it.

    But in my opinion, you've done everything you can do, and it looks like a malfunction of the motherboard. If cleaning using fan doesn t I think the motherboard is faulty or something else. If you are familiar with the disassembly of the laptop, you can try to fix it yourself with second hand parts. Otherwise it s time for a new laptop I think

Maybe you are looking for

  • Satellite A300 - install the secondary hard drive

    Hi all I'm new to the forum. I was thinking about adding a second hard drive of my laptop.I saw that there is a single disc and a space for a second Is this possible? If so, what drive would be worth? Thank you

  • Software update does not see Bootcamp 6

    I'm running OS X 10.11.3 (El Capitan) on an iMac of retina end of 2015. I migrated from an older iMac, including to move a partition, Bootcamp with Winclone. I was able to move from Win 7 to 10 to win on the old iMac and successfully get the partitio

  • How to use EditField?

    Hello I want to input the editField aid or any input field, but to filter the characters. As I want to let anly *, +, 0-9, no other displayed if entered... How do I implements it... Need help

  • Update credit card information

    I received a message that I need to update my Amex account though. How can I do?  My current Amex card expires at the end of this month - I just got a new card. Help.  Louise Heiss

  • Text.Shaow property is one not working in firefox

    I was do textfield and apply shadow (use fillter, code times)It's in the same form IE and Chrome work, movieclip. But the shadow of the text is not work in firefox.If you can solve this problem please give me adviceThese imeges are my outings.IE