Mac 10.6.8 Business Inkjet 1200n - printer does not print (printer error)
Mac 10.6.8 Business Inkjet 1200n - printer does not print (printer error)
Anyone has an idea how to get pinter will again? I loaded a current printer driver, but it did not help. The pilot goes hand in hand with this Mac OSX. I restarted the printer. Still no luck.
Help!
Hello
HP Business inkjet 1200 series is not compatible with Snow Leopard, as you can find below:
Try solutions third 3rd as HPIJS, which seems to support your printer and should provide basic features of the printer.
Don't forget to install one of the prior agreement of 3 downloads required as a result of the printer, configure the instructions:
http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/macosxhpijs
Shlomi
Tags: HP Printers
Similar Questions
-
driver windows Xp 64-bit HP business inkjet 1200n
I need driver windows XP 64 bits for HP business inkjet 1200n
Thank you
Hi RadioCTO,
You can find more help if you post on one of the aprons for class printers business. You can check it at:
http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.Uk1PqRCrF3s
-
I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.
Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?
-
Hello
I still have the "system error 1068. The dependency service or group was able to start.
"I use Windows 7 Home premium 64-bit and my printer is HP PSC 1310 series.
I downloaded the latest driver in the HP website, but it will not continue installation that the print spooler is not started.
I tried "restart the spooler to print the title of the services, it does not, with the error message above.
I have check the dependencies and it say HTTP and RPC
I check on RPC and DCOM Server process Launcher two dependencies and the RPC end point Mapper is started
I went to regedit and found the keys as follows I don't know if its correct:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler]
'DisplayName"="@%systemroot%\\system32\\spoolsv.exe,-1 '.
"Group"="SpoolerGroup."
"ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
00,70,00, 6f 00 6f, 6 c, 73, 00, 00, 00, 76, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 00, 00
'Description"="@%systemroot%\\system32\\spoolsv.exe,-2 '.
"LocalSystem ObjectName"=""
"ErrorControl" = DWORD: 00000001
"Start" =: 00000002
'Type' = dword:00000110
"DependOnService" is hex (7): 52, 00, 50, 00, 43, 00, 53, 00, 53, 00, 00, 00, 68, 00, 74, 00, 74, 00,------.
70,00,00,00,00,00
"ServiceSidType" = DWORD: 00000001
"RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.
00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.
72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,
00,65,00,67,00,65,00,00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,------.
72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 68,.
00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 74, 00, 69, 00, 66, 00, 79, 00, 50, 00, 72, 00,------.
69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 41, 00, 73, 00, 73,------.
00,69,00,67,00, 6F, 00, 50, 00, 72, 00, 69, 00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00,------.
6 b, 65, 00, 00, 6F, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00,------.
00,53,00,65,00, 4 c, 00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00,------.
50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 00, 00
"FailureActions" = hex: 80, 51, 01, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.
00,01,00,00,00,60, EE, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Performance]
"Close" ="PerfClose."
"Collect"="PerfCollect."
"Collect Timeout" = dword:000007 d 0
"Library"="winspool.drv".
"Object list"="1450".
"Open" = "PerfOpen."
"Open Timeout" = dword:00000fa0
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Security]
"Security" = hex: 01, 00, 14, 80, 78, 00, 00, 00, 84, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.
00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.
00,00,02,00,48,00,03,00,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.
05, 0, 00, 00, 00, 00, 00, 18, 00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.
20,02,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 12, 00, 00, 00, 01,
01,00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00
I go to C:\Windows\System32\spool\PRINTERS, there is nothing for me to remove it.
Any other advice would be greatly appreciated...
Hello yan_dao69,
I suggest that you try the methods below to solve the problem.
Method 1:
I suggest that you run the printer troubleshooter. This will automatically diagnose and fix printing problems:
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Ideally, this would set the print spooler service issues.
Method 2:
I suggest that you disable the Antivirus software temporarily and verify if you are able to start the print spooler service. You can check the link that will give you information disable antivirus below:
http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software
Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.
Method 3:
Check the dependency of the spooler services in the registry.
a. Click Start, type regedit in the search box and press ENTER.
b. look for, and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler
c. right-click on spooler, click Export, save a backup file on your desktop.
NOTE: If an unforeseen problem be encountered after changing the registry, please double-click on the file to restore the backup.
d. in the details pane, if the DependOnService value shows values of RPCSS and other key, right-click DependOnService and then click on edit.
e. in the value data box, delete the other keys and then click OK.
f. exit the registry editor.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756 ) how to back up and restore the registry in Windows.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think. -
My printer does not work - sometimes error 41
My printer does not work - sometimes error 41... What ever that is?
Hi Audrey,.
Welcome to Microsoft communities.
From your description, I understand that you are unable to print you get an error 41.
1. What is the brand and model of the printer?
2. when exactly you get the error message and what is the full code error message?
3. did you of recent changes made to your computer before the show?
4. using a printer or wireless?
Method 1: Run the troubleshooter
Open the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Method 2: Run the fixit:
Diagnose and automatically fix problems printing and printer
http://support.Microsoft.com/mats/printing_problems/
Method 3: Follow the steps in the link:
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.
-
ORA-20099: E-Business Suite Edition Patch does not exis
Hi all
EBS R12.2
RHEL 6
After that we encunter the fluctuation of power, our server is working. After the power is restored, we started our EBS and the server, the following error throws up:
[root@crp2 ~] # su - applcrp2
Information on the E-Business Suite environment
----------------------------------------
EXECUTION of the file system: / home/applcrp2/CRP2/fs2/EBSapps/appl
PATCH file system: / home/applcrp2/CRP2/fs1/EBSapps/appl
Non-Editioned filesystem: / home/applcrp2/CRP2/fs_ne
DB host: crp2.oracle.amti.com.ph Service/SID: CRP2
Supply of the file system to RUN...
[applcrp2@crp2 ~] $ sqlplus apps/apps
SQL * more: version 10.1.0.5.0 - Production on Tue Jul 21 12:46:16 2015
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-00604: an error has occurred at the SQL level 1 recursive
ORA-20099: E-Business Suite Edition Patch does not exist.
ORA-06512: at line 29
Our EBS is corrupt?
Help, please...
Thank you very much
JC
I suggest below
env 1.) source for the patch file system
2.) adoption PHASE = CUTOVER. This will make Patch file system run the file system.
3.) start the application, make sure that everything is more recent and correct.
4.) adopt PHASE = FS_CLONE - this will copy the file system to run on the patch file system.
This can get your EBS.
Now, why this happened can not say, R12 itself that we had seen corruption in the config files as those who wrote whenever you stop.
and I would suggest good get rescued food and raise SR too if you want to dig the question
concerning
Pravin
-
I try to install After Effects CS6 11_LS7 on MAC OSX Yosemite 10.10.1, but it does not open? I can't find a download later for AE CS6 that may fix this problem. What should I do?
Make sure that you have downloaded the installer of mac, not windows.
If you are sure that you have done this, what is the file on this file extension?
otherwise,.
Downloads available:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
- Lightroom: 5.7| 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
How to connect a Windows 7 pc to a Business Inkjet 2800 printer over the network.
We change Windows XP proffessional x 86 to 7 x 64 Enterprise, and our printers, Business Inkjet 2800 (3 of them) is part of our network. I understand that no drivers are available, so my question is how do we install them? If it's a driver OS, which one is it?
It seems that your printer is a commercial product.
You can get a better response by posting in the trade forums.
http://h30499.www3.HP.com/T5/printers-DeskJet/BD-p/BSC-415#.UGThUE3A9-c
-
HP Business Inkjet 1100dtn first would not print at all, now prints black and magenta and cyan
Hello world.
First of all I must say I spent most of the night reading the posts here, especially this one:
I find that a lot of people are frustrated, but I also find that a lot of people go a long way to help, which is nice. :-)
I bought a HP Business Inkjet 1100 DTN in 2004 or more and was extremely (!) satisfied with it. This is the best printer I've ever owned when it comes to value for money and durability. However, he was put away for a few years and a friend played with it to make it work. I think also, it has removed the print head and cartridges for awhile. This could possibly make the printheads, ink near the connectors and not dry out the cartridges?
Anyway, I got home yesterday, and the first think I did was soak the print head in warm water. I don't even bother try everything first. Also, I cleaned up the two electrical contacts for the print heads inside the printer and the print heads themselves. Finally, I used a dozen q-tips to clean ink residues near the two connectors for the cartridges and print heads.
After all this, I went for a clean full from Windows. The first testpage (power while pressing X on the printer dock) came out as expected... terrible. No black, not yellow, almost no cyan and some magenta.
I repeated soaking in hot water, only hotter this time (boucherit filled with water in the dish, then dip the lowest 3-4mm of each print head). Each of them sunk ink when I stirred the water so I was optimistic. Yet once, I ran a full cleaning of Windows and print a testpage (hold power while pressing X on the printer)
Much better this time.
Now, I had about 50% yellow, which should have been there, 70% cyan, magenta to 90% and the text on the upper part was mostly black. Magenta has helped fill in some places where black does not.
However, right after cleaning with water or alcohol, it prints fine for maybe 1 testpage, then it is worse. Also I noticed that the black ink is very sticky, so I think he skipped over the years. I know that I can just buy a new set of ink, to make the power contained in the cartridges heads line and heads are full of old and thick ink. Even with heads printing, no need to buy new ones since the supply line is full of old and thick ink.
I also noticed that the supply line for the cartridges printheads have air bubbles in them. I see bubbles in the yellow and magenta lines, but the cyan and black are too dark to see. I guess that's a problem? I read that energetic cleaning combined with print between the two may over time to solve this problem, but I have to say that I did the cleanings at least 25 tonight and the bubbles are more or less on the same place. (I also notice some bubbles and marked their position). They move when the pump in the cartridges are being exploited, but coming back to the same place after. Almost as if the printheads does not accept ink, are blocked or have internal pressure which must be ventilated. (?)
So I guess I have to get a kanyle (not sure of the English word), remove the ink cartridge to suck little ink, and then remove the print head and inject the ink, I took the cartridge it is until the power line is free of bubbles also good and old ink. Then replace the cartridge and the head.
Am I mistaken or I think much too advanced?
Here are some of the testprints in the correct order. There are many others, but I downloaded the most important.
Note that yellow was there at the beginning, so also was the cyan. Now they are both almost gone again. I suspect than that to have something to do with air bubbles? I'm not sure. Magenta seems to be the only color as well. : PEI
I also tried the tip to the subject of bumping the cartridge (I did the same thing with the print heads) with no noticeable improvement. Also, I cleaned the rubber gasket on the black cartridge with a paperclip. Of course, he came out with ink, but it was sticky.
Please answer because I would really get this printer up and running again. :-)
Ben of the Norway.
Hi again. Sorry for double posting, but I thought it deserved a post of its own.
After having tried everything last night (I worked at least 8 to 10 hours on the * beep * printer) I got so sick so I just took all the print heads and tempered 5mm lower them (side of the printhead) in hot water and let it just sit there for 2-3 hours. I had forgot about them when I went to bed. I cut them a bit and inserted into the printer, rand a clean and printed this:
The yellow one is still a little with rays, I guess that some nozzles are always blocked, but at least now I know the formidable powers of the hot water. :-)
Ben of the Norway.
-
printing problem: my model Z715 inkjet Lexmark it does not print
It worked fine before after after trying to remove the 2nd print order I have perhaps inadvertently deleted/removed some action / step, it has stopped working all together. Deletingthe printer and reinstall. Still, he does not what could have gone wrong.
Hello
· try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer
· ________________________________________________________________
http://support.Microsoft.com/GP/printing_problems
Read the information above from Microsoft about fixing printer problems.
· ________________________________________________________________
You can also track information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
and read this microsoft tutorial too
Introduction
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
-
When calling from my iphone, I get a busy signal, but it does not
Iphone5S: when calling from my Iphone, they get a busy signal, but I do not use it.
Is do not disturb on? (icon of Crescent Moon in the right line at the top)
-
print spooler does not start with error 1068
RPC server is unavailable and not resumed to installed printer. does not load because the rpc unavailable printer. tried to start the spooler, but had the error code 1068. Also, I can't access windows update after an error 0x80072EFF.
Hey Robcon,.
Excellent new (I suppose) you have fixed the problem :) - can you tell me if it is the control or repair install solved your problem?
--> I hope this helps! Please mark it as correct answer or vote if it does :)<>
http://www.pcuk.biz - my website
Info from Microsoft about phishing . Information from Microsoft on the fake security software
-
Just re-installed a fresh copy of Photoshop CS6 on my Mac Book Pro Yosemite and somehow the Adobe Application Manager does not work and so can't check my copy. What should I do?
I get a message saying that Adobe Application Manager can be damaged and that I should install a new version of the MAA. But after downloading a new copy of MAA and makes installation, the program (AAM) will still not installed. It's like an infinite loop!
Please, someone help!
Thank you!
HI gener7!
I'm sorry but I'm not on creative cloud. I'm still on CS6 and it was Adobe Application Manager was not working and I could not install the update to this application. My AAM version is: 8.0.0160
The link you provided was the update I wanted to install but it does not work. A window will appear during the installation that says:
We encountered the following problems.
Setup could not initialize. Please download Adobe Support Advisor to detect the problem.
and then the link to Adobe Support Advisor that leads to a page "Adobe Support Advisor has been abandoned".
Thank you!
-
A couple of years back, I bought creative suite design standard cs6 for my imac. Now, I have @want to install in the new mac book pro and it does not cd, is there a way where I can download it and install it in my new mac?
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
-
MG2500 series inkjet Canon printer error code 0 x 80244018
I tried to configure my printer, but I get a message error 0 error code x 80244018 'utility printing ink jet Canon, app has not been installed". I after having been through the Windows store. I have Windows 8.1. How can I solve this problem? Thanks for any help.
PS sorry for the "BOLD" text and large. I had shingles and viral meningitis last Oct 2015 and was left blind in my right eye. Make the "BOLD" text and more help me to see it a little better. Thank you
Hi BeKa,
Please try to install your PIXMA MG2520 the use of the driver available on the Canon Website:
1. visit the Web site at: http://usa.canon.com/support
2 type PIXMA MG2520 in the box "enter a model name.
3. under recommended downloads, please click on the Select button next to ' MG2500 series full driver & software package.
4. If you agree, please select the check box next to "I read and agree to the terms of the disclaimer and wish to continue the download.
5. click on the download button.
6. If a save as appears, click Save.
7. once the download is complete, open your download folder.
8. double-click on [win-mg2500-1(1)(a) - ucd.exe].
9. connect the USB cable when prompted.
Follow the prompts to install your PIXMA MG2520 on your computer.
Maybe you are looking for
-
I use firefox as my home page. On a regular basis, it tells me im not not using the latest version. When I click on the help icon it says im update. Sometimes a large orange icon appears to the left of the part that says im not not using the latest v
-
Satellite C70 - A - upgrade Windows caused 10 black screen
Hi allI have a Toshiba Satellite C 70 and have recently upgraded to Windows 10. It went well , but the next update caused my screen to go empty. I checked all the equipment and materials - all OK. I have downgraded to Windows 8.1 - no change Having h
-
Satellite A50-109 shut down when the CPU has to work hard
My laptop off when I open the www with graphic flash or when the processor has to work hard. What's wrong?
-
Hey all,. I have a problem with my CD player in my Pavilion dm4 notebook. It is an error message (exclamation mark) next to my CD player in my device manager, saying that "Windows cannot start this hardware device because its information of configur
-
Unable to browse the internet for the VPN (ASA5505 running 8.3)
We have improved our ASA 5505 to 8.3 firmware image (2) and we have a working VPN configuration (customer VPN in Windows can connect and browse the network of the company as well as their local networks [split tunnel seems to work in this regard]).