Mac address of the block

Similar Questions

• Determine the MAC address of the LAN knowing that the model and serial number

  Laptop Toshiba SN 96592614 G

  Is it possible to determine the MAC address of the network card, knowing that the model and the serial number of your laptop?

  How to enter the Toshiba addicts.

  I saw you using Toshiba unit details page with the serial posted Qosmio F30-113 offered in Russia.

  Your laptop is stolen or what?

• WLAN Access Denied for active MAC address in the ACL

  I have a pretty great list ACL (Access Control) and I've never had a problem with it in the past, but I just got a new laptop and same computer when I save the MAC address and reboot the router I always get the "WLAN Access Denied" error for access from your laptop.

  I did all the "sanity checks" to ensure that the password is correct and that other devices still work.

  I had the MAC address of the laptop the same way, I always have, I see the MAC address in the Logs in the access denied message and copy it from there, in the access list. I did it with more than 20 other devices successfully, I'm not sure what is different about this one MAC address... I confirm through ipconfig on the laptop that the MAC address I use is correct.

  When I turn off ACL, I can connect without any problem of the laptop.

  Any thoughts? I am very familiar with computers and you can do an advanced troubleshooting, I do not know infrastructure and networks of the stuff so I don't know where to start here.

  Any ideas on how I can fix this would be appreciated!

  You may have hit a limit of the ACL. A test, remove a device from your list and see if your laptop will connect. This would confirm if you have contributed the most to list ACL on the router...

• Find the MAC address of the host remotely logged on to a domain

  Hello

  I work in an environment where we use the thin client (Sun ray DTU) to connect to sessions. The sessions are communicated through solaris servers, and windows servers. Explain further, the thin client connects user to the layers of solaris that connects to windows to allow the user a session window. Window servers are in a private domain. I work as a security consultant in the business and use a management software log for surveillance of newspapers. I collect the windows logs via the software (Application, security, installation, System) agent. My question is, HOW do I GET the MAC ADDRESS OF THE THIN CLIENTS? I have the IP address, username etc but not the mac address of the workstation. However - the TASK MANAGER and REMOTE DESKTOP SERVICES MANAGER give the MAC address in the CLIENT NAME. I raised the level of the event log to ' 5 "(through registry), enabled all policies audit with categories and subcategories as well but always without success." " I am using Windows Server 2008 R2 Enterprise edition.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Analyze the Mac address with the regular expression matching

  Hello world

  I have a problem with the function of regular expression matching,

  I try to analyse the response both a query arp - a 192.168.0.15 to retrieve the MAC address of the remote IP address, I used the following regular expression: ^ ([0-9a-fA-F]{2}[:-]){5}([0-9a-fA-F]{2})$

  I wonder why should I do a subset of the first string to extract only the part of the MAC address. The regular Expression function is not able to recognize the regular expression directly in the middle of a string?

  I only works when I extracted the subset of tring right as in the picture below.

  Thanks for your replies.

  Get rid of the "^" at the beginning of your regular expression. You are ordering him to find the model at the beginning of the string.

• Access point WAP54G whose MAC addresses are the same

  I have 3-point WAP54G access that are connected together using wireless bridge settings found under the "AP Mode" in the menu.

  I would add a fourth unit, but as I am doing so I discovered that the 4th unit network MAC address is the same as that of the three already existing in my lan bridge WAP54Gs.   How can this be?  All units, aren't supposed to have unique MAC address of the factory.  I have triple checked to make sure that I am indeed two different units WAP54G.  Yes there is indeed to disting WAP54G units in my possession to what appears to be duplicate MAC addresses.  Then two units with double MAC addresees exsist on the same bridge LAN?  If this is not the case, is it possible to change one of the units, itg is not possible to return a device?  Thanks in advance for your help in this matter.

  David Desesquelle

  Tech Mgr.  HE

  Capricorn productions

  New Orleans, Louisiana

  (Mod Note: deleted non-public information.) (Thank you.)

  What is the common MAC address?

  Concerning

  Fred

• Command BACK to find the MAC address of the computers that are connected with any windows Server

  Y at - it a DOS command to find the MAC address of the computers that are connected with any windows Server

  Usually, net view command is used to display computers on a particular network.

  To find the MAC address, it is best to ask the question here:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• MAC address for the BlackBerry emulator

  Hello

  I develop a J2ME application, it involves sending MAC address to the server.

  I use code below to get the emulator MAC address of BlackBerry 4.7

  I am running a MDS service to connect to the server

  javax.bluetooth.LocalDevice localDevice;

  localDevice = LocalDevice.getLocalDevice ();
  String macAddress = localDevice.getBluetoothAddress ();

  but it gives a value zero.

  Please help me on this.

  Thanks in advance

  The Simulator does not simulate a Bluetooth device.  If you want to do Bluetooth treatment, then you must buy a Board that works in your office, or use a real device.  I suggest you try your code on a real device.

• Find the mac address on the appliance IPS-4255

  I have an appliance IPS-4255, and this unit has 5 GE interfaces.

  I'm trying to find the addresses for all of these interfaces. It does not show the 'sho' int to the CLI, or appear in IME.

  Where can I see them?

  When the sensor starts, you can see the MAC address of the interfaces.

• IP Phone Dot1x - database MAC addresses for the configuration of MAB

  Hi all

  I need to configure the MAB for IP phones on the ports that are active dot1x

  Can I keep the MAC address of IP phones elsewhere then on internal hosts of GBA?

  It is possible in the ad or something similar...?

  Kind regards

  Georges

  Hello

  You can use your AAA Watt database server racks until you set the mac addresses as users on these databases.

  Remember that the mac address and the password are the same and must match the format that it receives in the RADIUS access request.

  Example: If the AAA client (switch) sends the mac address of the format xxxxxxxxxxxx, and then you create the user with this format.

  If she sends in the xxxx.xxxx.xxxx format, then you must create the user in this way.

  Usually, he sends in the format xxxxxxxxxxxx, but worht to ensure.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• How to get the MAC address of the additional 10G NIC with command-line ILO

  How to get the MAC address of the additional 10G NIC with ILO command line?

  Thank you.

  Hi Bruce,.

  Out of what I can find on this network card is not available for the Mac without an operating system. I recommend get/burning a live CD/DVD of Ubuntu/Linux and run an Ifconfig in there.

  Hope this helps you.

• How to find the Mac address on the body of Hp8440p?

  Hi guys,.

  How to find Mac address on the body of HP8440p without opening the laptop and find yourself from the bios or through ipconfig?

  Thank you

  Hello:

  You won't be able to find it without at least through ipconfig.

  Your laptop will have at least 2 MAC addresses, this is why they won't be on the case of anywhere.

  You will have access through windows or remove the wireless card and write down the MAC address of that.

  Paul

• get the mac address of the ESX host through powershell commands

  How to get the mac address of the ESX host through powershell commands?

  Is there a particular reason that you are on this rather old version of PowerCLI?

  The current version is 5.1 R2

• Assign a static IP address via DHCP based on the Mac address of the virtual machine

  Hi all

  It is especially a feature request, as I'm sure that it is not currently possible to do what I want to do...

  I would like to be able to assign static IP addresses to VM without having to manually configure the network settings of the virtual machine directly. I want to be able to do it from the DHCP settings in the virtual network Editor.

  Most of the routers DHCP allow this. They give an IP address through DHCP based on the MAC address of the client. This means that the customer is concerned that he receives a regular IP DHCP address, but it is never change.

  DHCP is the default option for all OS this makes things much easier to manage, as IP addresses is assigned in the same way, in one place for all DHCP clients, regardless of the client operating system, and without having to manually keep track of which the IP is assigned to which customers etc..

  Also AFAIK at least for Ubuntu, you cannot assign a static IP address without having to also statically assign to the DNS server. It is only the IP address I need to be static, so I prefer not to have to worry about manually assign the DNS server.

  I can just kind of fudge making the really long DHCP lease duration, but the maximum is 99 days only, so finally addresses are going to change, that would mean a whole bunch of reconfiguration for VM services, etc..

  Does anyone know if the workstation 9 has this ability? I am currently on version 8, but I would probably upgrade this function only if she can do it.

  If there is no way to do what I want to directly through the virtual network Editor, can anyone recommend a way to do this, perhaps using Guest only network and then, by running a kind of services to the 3rd party NAT and DHCP on the host?

  Thank you

  Eugene

  There is no GUI option to get what you are looking for, but you can do it manually. Please take a look at Re: assign a static IP to guest with network adapter NAT Virt? where I posted an example.

  André

• How to find the MAC address of the mobile device with ADF?

  Hello

  I'm developing a mobile application using ADF Mobile. The application requires the use of the MAC address to continue its development.

  Android SDK provides an easy way to find the MAC address as:

  WifiManager wifiManager = (WifiManager) getSystemService(Context.WIFI_SERVICE);
WifiInfo wInfo = wifiManager.getConnectionInfo();
String macAddress = wInfo.getMacAddress();

  Is there a similar way in ADF mobile to retrieve the MAC address of the device?

  Kind regards

  Joseph

  It can't do.