MAC and PC can reach the same an ASA for Anyconnect VPN?
Hi, we have MAC and PC users. We configure the Anyconnect VPN in an ASA. But two users need two image of sorts. We must therefore use the two commands:
AnyConnect image disk0: / anyconnect -win- 3.1.04066 - k9.pkg
AnyConnect image disk0: / anyconnect -macosx- i386 - 2.5.2014 - k9.pkg.
This is what two commands cannot coexist in an ASA. How to solve the problem? I hope your suggestion. Thank you
They can co-exist, but you must add different sequence numbers at the end of each command.
Tags: Cisco Security
Similar Questions
-
IMAP is not supposed to retrieve emails from the server only? In my case, all mails are downloaded to my mac and I can see the offline!
His grip on my mac space, even if I'm using the same settings for my Iphone email are not downloaded to the phone and its not not using any space!
It is often possible to access the same account using IMAP or POP.
Make sure that your settings are correct. The account type is on the first part of the account preferences.
-
I was using my MacBook today and it crashed and the dock turned silver, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock has transformed money! I tried to restore Mac OS and then also the same!
OS El CapitanThis can help:
Reboot safe mode (it is a slow process):
-stop of the mac
-Start up the mac in shift, press and hold until you see appear it to progress bar, so you can let go
-When everything started, connect
-Once connected, stop the mac once again, nothing else is necessary.
-restart normally.
Lex
PS: This clears all system caches.
-
Why use push and pop where addChild and removeChild can do the same work?
Why use push and pop where addChild and removeChild can do the same work?
What is the advantage of the push and pop on addChild and removeChild?
It depends on what you're trying to accomplish. If you explain more about under what circumstances you would use them, a more definitive answer can be provided. Push and pop of the work for arrays. addChild and removeChild work for displayObjects.
-
Load of Lightroom for Mac and Windows PC using the same serial number
Would I be able to load lightroom for my MAc and Windows PCs using the same serial number?
Yes (if you have purchased the full version).
Thank you
Nikhil
-
I made my largest site and how can keep the same size for all other sites?
I did the 2 larger site and how to keep the same size for all pages when I re - open the web browser?
You can use an extension to set a page zoom and the size of the default font on the web pages.
- Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
- NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
-
Can I use Lightroom on my mac and my pc at the same time with a single subscription?
Hi all
for five months now, I have a subscription to creative cloud for Lightroom and Photoshop. So far, I used just on my PC. Now I have bought me a MAC and want to install Lightroom on MAC either. Do I need a second subscription for MAC or can I use my subscription on MAC and PC at the same time?
thx for your comments
If you ask if you can run the software subscription on both machines at the same time, the answer is no. Your license you can only use one of the facilities at any given time.
If you ask that if you have the software installed and that can be used on both machines so the answer is Yes... just can not both machines in use, software subscription running at the same time.
-
I just bought 1 full license of Adobe Lightroom 4 and I can see that there is an installer for Mac and Windows.
This means I can install on both systems or my license is valid for 1?
Thank you
BR,
Lucia
Yes, LR is cross-platform and you can install it on both systems.
Mylenium
-
CC of InDesign for Mac and PC are not the same?
I have creative cloud on a Mac and a PC. I can't open Indesign Mac on PC files and it's frustrating. The whole point of getting Adobe CC should be able to work on both platforms. The Mac of Indesign version is showing that 9.2.1 and the PC version is showing that the version 8.0.2. If you're never going to get the PC version, the same, how can I return the Mac down to version 8.0.2 so files will be interchangeable?
Sounds like you have CC Mac, but only a CS6 version (that you could get subscription) on the PC. Make sure that you install CC on both machines.
-
InCopy and InDesign can open the same assignment at the same time
Can someone help me? In InDesign, I created assignments. When the editor designer check out them, the InDesign assignments Palette does not refresh to show that they are checked and are not available for me to edit. Instead they remain marked as available and I am able to check at the same time that the editor has them open. If the editor has several assignments checked, they do not appear as checked out in InDesign until I select "Update all assignments" in the assignments Palette.
Everyone comes through this before? We cannot begin to use InCopy until this is resolved.
See you soon
Well Yes, that Bob says.
You can confirm by installing both InDesign and InCopy on the same computer and you give a different file > user usernames for each program. Discover the stories in InCopy; InDesign has to show them that it is locked.
AM
-
The ID attribute of the station call needs for Anyconnect VPN client MAC address
Hi all
We test tring Anyconnect VPN users to connect using the certificate. ASA East of validation / authentication user based on cert and approval it requires Radius server (ISE). Currently ASA sends the Ip address of the VPN client in «calling station ID» We want ASA to send the Anyconnect VPN client MAC address to the radius server in RADIUS attribute «calling station ID» Is it possible to do this. Get around them?
Parag salvation,
The calling Station ID always contains the IP if Anyconnect VPN.
L3 is originally unlike wireless which has L2 Assoc.
Currently no work around.
Respect of
Ed
-
With the help of ASA for our VPN
I was curious, if through the ASDM, there is a way to show that was recorded in the last week and for how long? I know through the CLI I can use the sh sessiondb-vpn l2l to see who is connected, but trying to get a report of its total use by user, date and time?
Hi Dan,.
The ASA does not all historical data connections so it won't be possible.
You can view the users connected to the part followed by ASDM but you do not have the reporting features.
Kind regards
Nicolas
-
Select the timeout on ASA Cisco Anyconnect VPN
Hello world
I use the Cisco Anyconnect VPN client with the ASA 5540 firewall. I need allow a time-out on the VPN clients, so they log off after x hours of inactivity.
Thank you to
Best respect
Hello
To my understanding of the default timeout value is 30 minutes
You should be able to change this setting in the "username" configurations (if you use LOCAL AAA on the SAA) or under the configurations of the 'group policy' .
The command is
VPN-idle-timeout
Here is the link of the commands reference
http://www.Cisco.com/c/en/us/TD/docs/security/ASA/ASA-command-reference/...
-Jouni
-
You can open the same app twice for both sides of the screen on iPad pro?
I want to open the application even for both sides of the split screen. Is this possible?
No, this isn't a feature of iOS.
-
can I use the same USB cable for two printers - HP Officejet 4315 and HP Officejet 6110?
I have an existing HP Officejet 4315 with USB cable and want to use the same cable replacement for my other printers, the HP Officejet 6110. This allows me to change the cable between the printer and still work?
Thank you for your thoughtful replies.
As you asked specifically about the compatibility of the USB cable, I would say that it will work because both devices support USB 2.0 (that is, both devices can be used with the same USB cable alternating).
Installation of the software for the two devices must be made successfully to use various functions.
Maybe you are looking for
-
After the new update on the login screen it asks a Skype name and password. I used to use my microsoft account to connect to Skype and therefor have no idea how to connect with this new interface. I tried every password I can think and even changed m
-
time of Labview application to run on pc without slow loading labview environment!
Hello! I did an executable file of my project. When I run it on my pc (where installed labview development), I don't have problems and instantly loaded application. I tried to run the exe even on several other computers, all having the same trouble -
-
feat: java / impossible to completely remove the cve-2010-0840
MS security scanner found this and says it has been partially deleted. nothing I've tried it deleted completely. another antivirus says just update my version of Java and it would be ok. I did and Odile always gives me the same message after executio
-
Printer error: "Print filter Pipeline host has stopped working" Dell V505 whatever that means and what is the fix?
-
Windows Mail contacts are more alphabetical
When you use Windows Mail, my contacts drop-down list all names in alphabetical order; However, when I send an email, using tools. Selection recipients for contact addresses, names are more alphabetical. They are all caught up making it difficult to