Mac book pro early 2011 start 2011 15 "- MC723LL/A problem"
Hi, I have a Mac Book Pro 15 2011 beginning "-MC723LL/A, which was a problem for a few months."
When I turn it on, it is stuck in start page: in the apple logo and stay there for a while and then restarts or shuts down. The start page is not normal and it is of low quality.
I tried in single user mode and repair it's hard but it did not work.
I tried to install different versions of Mac OS on DVD (Captain yosemite and el), the process is slow and sometimes work. but after using it a few times (after stop or restart) the problem is back.
I heard a problem in these series of mac book. the link is: http://www.macworld.co.uk/news/mac/widespread-2011-macbook-pro-failures-petition - trial-repair-program-3497935 /
I'm in a country that is not being handled apple, but soon I will be in Dubai, which has the support of apple. my book mac technical support and service coverage has expired.
I heard that apple take the problematic product and purchase offers of new products whose price reduction.
Can someone tell me how to fix it or get a new one.
Any help is appreciated.
Repair your Mac must be covered until 31 December 2016. See the following topics
http://www.Apple.com/support/MacBookPro-videoissues/
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum
Tags: Notebooks
Similar Questions
-
I installed Adobe CS6 Design & Web Premium on my Mac Book Pro a few years ago, but repeatedly encountered problems with programs freezing or do not open correctly. It is a student and teacher license version so a University identity is required, but I'm no more a student - can I always reinstall it from my academic ID may no longer be valid?
Erin Elzo as long as serial number has been registered under your account at http://www.adobe.com/ , then you should be able to continue using the software. You can find details on how to locate your serial number registered to find your serial number fast - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
-
updated my mac pro early 2011 book now really running hot
I wanted from the upgrade of my mac book pro early 2011 I7 quad core 8 G ram 2T HDD
So I finally did. I like it, but now my mac runs hot 116 degrees. the fans are running.
boot time has also more he takes more time.
I used my mac pro for dj book I also do a video mixer.
run final cut pro x no problem
I also do recording on a DAW. never had any problems so far.
I understand is difficult to test on all models is a solution for this.
I thought he was going to improve performance, I don't see it seems to take more time during startup.
How about this circle just turn around.
I know that you guys try.
I hope hear from you soon.
Thank you
Run programs of type DJ on an Early 2011 MacBook Pro, while also on El Capitan put quite a strain on the machine. Programs of DJ using just the music will pull a use much more memory and CPU than normal, not to mention video mixing as well. That being said, you use a USB jack in a box/audio mixer (like SL3 or Pioneer DJM900) or you use a DJ controller?
I do not think that 116 degrees is too abnormally warm for the type of stress you put on the machine. I would possibly consider a SSD drive. Not only will improve performance, but because you will have parts in SSD, as you would in a standard hard drive, the machine should run cooler.
-
Can I connect an external display in Mac book pro with other connction as Thunderbolt
I have an extran via TB screen connected with a mac book pro early 2011 for image corrections
Now, I want to add an external box with my MB as well and use the thunderbolt connection, but it is already used by the login screen extrenal
are there other possibilities to plug my screen so I can use the TB connection for extrnal HD?
I only have 1 free USB 2.o and a fire wire 800 free, can I use one of these attachments?
Try one of these:
https://eShop.MacSales.com/shop/Thunderbolt/dock/OWC/Thunderbolt2-dock/
Ciao.
-
Mac Book Pro and HP Envy 110F wireless printing problems
I got my Mac book Pro for Christmas 2013 and initially had no problem printing wireless to my HP Envy 110F, but for some reason, I keep getting problems with printing to the envy of 110. We don't have printing problems with our Ipad for this printer.
I can connect the printer to my Mac book Pro by putting 192.168.1.72 IP address in a web browser, but I get on the symbol bit offline when I print the urge. Last night I reinstalled the printer to print wireless on my mac pro book using a printer cable, which then worked well, but today the same problem reappeared.
I'm starting to think that the problem may have started with the latest version of the update of the operating system to the Mavericks 10.9.4.
All thoughts welcome.
Hi @UKCheshire
Since you are able to print from the iPad to the wireless printer, I suspect you have to something. I think that the question has something to do with the communication between the printer and the computer and not between the printer and the router. Please use the following document to solve the problem; "Printer is off-line" Message appears on the computer and the printer does not print: Mac OS X.
If the problem persists, do not give up hope, let me know and we will work through it together.
-
SSD hard drive for a 2011 mac book pro
Suggestions welcomed, I am looking to buy an SSD for my mac book pro 2011. Are there compatibility issues with an internal 2.5 inch SSD?
I would start by checking the web site OWC macsales.com. They are good to discuss the problems with specific models.
-
By the end of 2011 Mac Book pro 15 inch battery indicating zero
I have a 2011 Mac Book Pro (end) retina which really is not used as a laptop display. (always connected)
Just today, he showed zero percentage battery icon.
I have reset the SMC and that did not help
Should I try to disconnect the battery to see if it would help
Is the battery shot just like that?
Thanks for the help
In addition, if the battery needs to be replaced can I do it myself?
Hello
The battery may be necessary replacement.
Check the number of maximum cycle. Instructions here > Determining battery cycle count for Mac notebooks
http://www.Apple.com/batteries/service-and-recycling/
You can replace the battery yourself > https://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+Battery+Repla cement/7511
But if you have never done this before, I recommend you take your Mac to an Apple Store. You can make a reservation in advance at a Genius Bar.
-
If anyone can help, I just bought a 2011 mac book pro and I use it for school and I work in education and currently I have lightroom, photoshop and adobe DC, are all the other apps I put on it?
Chaka - welcome!
What you want to do on your "new" MBP?
-
Mac Book Pro end of 2011 up to 16 GB of RAM?
Dear community
my Mac Book Pro 15 "with 2, 5 GHz Intel Core I7, defined as 'late 2011' need for an upgrade of RAM of 4 GB real to something better.
Check the plug on the Apple support forum seems my laptop can be upgraded up to 8 GB and is fine for me.
But I also went to the local dealer in Italy and told me that I can spend with module 2 * 8Gb to 16Gb.
It is true, or go up to 8 GB to be sure.
Thanks for your time,
Max
Quite true, a MBP late 2011 will support up to 16 GB of RAM. The best sources of RAM compatible Macs are OWC and Crucial.
I have 16 GB of RAM installed in my 2011 Mbps, and both executed without flaws.
Anyone who says that the 2011 MBP can not use more than 8 GB of RAM, does so by ignorance.
Ciao.
-
My Mac Book Pro 2011 becomes slow.
My external hard drive is full, and now my Mac Book Pro is slowing down. Is it possible to clean the things that I didn't need the external hard drive so I can continue to use it or is there a way to dump data I need not in the book of Mac to speed it up. I do not know which uses all the space so don't know what to look for.
If you use a HARD drive then it is probably your problem. You have an older system, but upgraded to a solid drive (which allows a flash storage) can have a lot faster write speeds. What version of Mac OS X are you using?
-
Heating - slow and freezing macbook pro early 2011 el capitan
Hello! I have a 2011 mac book pro, a few months from now on, he started to over heat a lot (it burns) and it is SUPER slow... sometimes it gets frozen (most with safari)
MacBook Pro (13 inch, early 2011)
2.3 GHz Intel Core i5
RAM 8GB 1333 MHz DDR3
Intel HD Graphics 3000 512 MB
El capitan 10.11.3 IOS (15 d 21)
disk storage 168 GB free (320 GB SATA drive)
I run clean my mac and repair disk permissions
It only worsens.
An advise please?
Thank you very much!!
A
'CleanMyMac' is a scam and a frequent cause of instability and poor performance. Depending on which version you have, the developer's instructions may not completely uninstall. Please follow these instructions, then do as below.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select this option:
/Library/LaunchDaemons/com.macpaw.CleanMyMac3.Agent.plist
Right-click or Ctrl-click on the highlighted line and select
Services ▹ reveal in Finder (or just to reveal)
the contextual menu.*, a file can open with a selected item. If so, move the selected item to the trash. You may be prompted for administrator login password.
Repeat with this line:
/Library/PrivilegedHelperTools/com.macpaw.CleanMyMac3.Agent
Restart the computer and empty the trash.
You may also delete one or more of these elements in the same way:
~/Library/LaunchAgents/com.macpaw.CleanMyMac.helperTool.plist
~/Library/LaunchAgents/com.macpaw.CleanMyMac.volumeWatcher.plist
~/Library/LaunchAgents/com.macpaw.CleanMyMac3.Scheduler.plist
Never install "CleanMyMac" or something like that.
* If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
B
Apps can affect the performance of Mac, battery, temperature and fan activity - Apple Support
-
Mac Book Pro El Capitan won't start
End of 2011 Mac Book Pro with OS X 10.11.2 and 500 GB SSD locked when you change an image in Lightroom 6. Display got lines in there, then moved to the right until all the images in all programs were packaging off the screen on the left and ending on the right. I decided to quit Lightroom and it went in her check and the safeguard of this app. At this point the computer locked up completely with the beachball forever. I stopped with the start key and restarted. Desktop came, but then locked up again. No restart in any mode after that. Computer goes the logo Apple on a white screen with the high CPU activity as evidenced by a cooling fan screaming.
I have a backup recovery app on a USB key, but does not know how to use it. I also still have the original hard drive that could possibly be re-installed, but he showed signs of early failure.
Can anyone help?
Thank you very much
Tom
-
Is it OK to mix 2 GB and 4 GB in an iMacbook Pro (early 2011)?
Is it OK to mix 2 GB and 4 GB of DDRAM in an iMacbook Pro (early 2011)?
Yes. Just to note that Macs are picky about the memory and should get only a memory of the place that ensure that proper operation with your Mac. Crucial and OWC/MacSales are places. Working memory that not always match the Apple card do
-
Can not start my Mac Book Pro Apple on Dual Boot
Hey guys - need help
I have a 2015 Mac Book Pro that I have a dual boot with Windows 10 of setting, everything went well, but I found that I had lost the ability to open any program in Windows, installation of 'apps' thedesktop went, Edge Windows, search etc had disappeared off the coast of the taskbar. Restoring Windows installation wouldn't work, so did a repair through the control panel within Windows 10 who worked and everything in Windows was back to normal.
But now, I find that I can not boot into the side MAC from my laptop, if I go into my PC the "Bootcamp" of my SSD drive partition is there but no side of MAC.
Any help would be appreciated.
Try to start by holding down the Option key.
-
My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug. Ran disk utility and verified that the disk needs repair using recovery HD. What does this lead and what is the risk of losing all the data is there?
Even if it is very slow, you must make a return upwards before the race "repair disk". The risk of data loss is minimal, but do it anyway: Save and run to repair the disk.
As for what it implies - most of the time nothing more than simply sitting and waiting to do his thing.
Maybe you are looking for
-
Problem with Firefox 14.0.1 and Java
Since I've upgraded to firefox 14.0.1, I can't access a site that requires the latest version of Java (#36, I think). I installed it on my computer, but the site does not load. However, I have firefox 13.0.1 on another computer, and it has no problem
-
NB100-11R: Wlan Authentication has no problem with Ubuntu installed
On my Toshiba NB 100 - 11R, Ubuntu is installed.Ideally, I would like to browse the Internet and clicked on network connections.All fields were dark and the click of a button down came the following error message:Authentication failed! What can I do?
-
HP Pavilion a6519f: remove and cover your pocket media Bay driver on hp pavilion a6519f
Hello, hope someone can help out me. I've upgraded my pc and have no need for driver compartment Pocket multimedia so want to go out but nobody knows with what I can use to conceal the Bay so I have an empty space in front of the pc just for reasons
-
How to install this
-
optical mouse does not work.
What hardware/software problem could prevent a Logtech M185 and a wireless mouse NSB work on a desktop Compaq under Windows XP SP3, after notice of default HID mouse Targus AMW50US at startup from hibernation?